Issue on HR reporting
Hi,
when i try to execute the query of annual wage type overview but it not showing correct results.this is standard query and the infocube is 0py_c02.can you please guide me where can i check the to fix the issue.
regards
RK
Hi RK,
For HR you need special authorizations to the extraction user:
Payroll (PY):
For example, DataSource 0HR_PY_1, 0HR_PY_PP_1
P_PCLX (is part of P_BAS_ALL)
Please check note 397208.
Success
Udo
Similar Messages
-
Issue in SSRS report
I have a table format report, in SSRS when i try to export i should get 10 rows per sheet.
I try to change the page limit and break option but the result doesn’t get splitted
Can you please any one helpsHi
This can be done at the reporting level. Below link will help you solve this.
http://www.wiseowl.co.uk/blog/s257/ssrs-rows-per-page-pt2.htm
When you have multiple pages, your header may disappear. So below link will help you to have the header repeating in each page.
http://social.technet.microsoft.com/wiki/contents/articles/19398.ssrs-how-to-repeat-headers-on-each-page.aspx
Let me know how it goes.
Cheers
[email protected]
Dr.Subramani Paramasivam -
Hi,
I have a issue in ALV Report for displaying one field's data into output.
I am getting data into all other fields in ALV Report except for this field.
This field & related fields are declared as below: in final internal table.
sta_no TYPE z3status,
status(10) TYPE c,
Here z3status is of type Char(1).
In Report
I have put a condition :
IF i_tab-sta_no EQ 1.
i_tab-status = 'Created'.
ELSE.
i_tab-status = 'Closed'.
ENDIF.
and to field catalog also i am passing right information as for every other field in ALV Report.
Till the point use of REUSE_ALV_LIST_DISPLAY F.M also final internal table is having status field filled.
But in output nothing gets displayed for Status field.
Can anybody tell me what can be the issue!
Thanks in advance.
Thanks,
Deep.Hi,
I have no problem in data fetching into final internal table.
Everything is coming well to REUSE_ALV_DISPLAY F.M.
But still Status field data is not getting displayed.
I have posted some code for reference:
LOOP AT t_z3manboxid INTO wa_z3manboxid.
wa_result-manifest_no = wa_z3manboxid-zmanno.
wa_result-item_no = wa_z3manboxid-item_no.
IF l_item_no NE wa_z3manboxid-item_no.
wa_result-piece_quantity = wa_z3manboxid-vemng.
wa_result-unit = wa_z3manboxid-vemeh.
wa_result-manifester = wa_z3manboxid-usnam.
wa_result-manifest_sta_no = wa_z3manboxid-z3status.
IF wa_result-manifest_sta_no EQ 1.
wa_result-manifest_status = c_created.
ELSEIF wa_result-manifest_sta_no EQ 2.
wa_result-manifest_status = c_in_transit.
ELSEIF wa_result-manifest_sta_no EQ 3.
wa_result-manifest_status = c_arrived.
ELSEIF wa_result-manifest_sta_no EQ 4.
wa_result-manifest_status = c_closed.
ENDIF.
ENDIF.
l_item_no = wa_z3manboxid-item_no.
APPEND wa_result TO t_result.
CLEAR: wa_result, wa_z3manboxid.
ENDLOOP.
Building field catalog following code is added:
For status call is as below:
PERFORM f_build_fieldcat USING c_tab
c_manifest_status
c_space
c_space
c_mannf_status
c_space1
15.
FORM f_build_fieldcat USING p_tabname p_fldname
p_rtabname p_rfldname
p_fldhdg p_check
p_length.
CLEAR t_fieldcat_ln1.
ADD 1 TO g_col_pos.
t_fieldcat_ln1-tabname = p_tabname.
t_fieldcat_ln1-fieldname = p_fldname.
t_fieldcat_ln1-ref_tabname = p_rtabname.
t_fieldcat_ln1-ref_fieldname = p_rfldname.
t_fieldcat_ln1-ddictxt = c_l.
t_fieldcat_ln1-seltext_l = p_fldhdg.
t_fieldcat_ln1-no_zero = space.
t_fieldcat_ln1-do_sum = space.
t_fieldcat_ln1-col_pos = g_col_pos.
t_fieldcat_ln1-no_out = space.
t_fieldcat_ln1-just = c_c.
t_fieldcat_ln1-qfieldname = space.
t_fieldcat_ln1-checkbox = p_check.
t_fieldcat_ln1-input = p_check.
t_fieldcat_ln1-reptext_ddic = p_fldhdg.
IF p_fldname EQ c_manno.
t_fieldcat_ln1-key = c_x.
t_fieldcat_ln1-hotspot = c_x.
ELSE.
t_fieldcat_ln1-key = space.
t_fieldcat_ln1-hotspot = p_check.
ENDIF.
t_fieldcat_ln1-outputlen = p_length.
t_fieldcat_ln1-intlen = p_length.
t_fieldcat_ln1-ddic_outputlen = p_length.
APPEND t_fieldcat_ln1 TO t_fieldcat1.
ENDFORM. " f_build_fieldcat
FORM f_build_sortcat USING p_fldname.
CLEAR t_sortcat_ln1.
ADD 1 TO g_col_pos.
t_sortcat_ln1-spos = g_col_pos.
t_sortcat_ln1-fieldname = p_fldname.
t_sortcat_ln1-up = c_x.
t_sortcat_ln1-down = space.
t_sortcat_ln1-subtot = c_x.
APPEND t_sortcat_ln1 TO t_sortcat1.
ENDFORM. " f_build_sortcat
FORM f_build_layout.
t_layout1-zebra = c_x.
t_layout1-no_vline = c_space1.
t_layout1-reprep = c_x.
t_layout1-detail_popup = c_x.
t_layout1-window_titlebar = text-005.
t_layout1-no_scrolling = c_space1.
t_layout1-detail_titlebar = text-005.
t_layout1-numc_sum = c_x.
t_layout1-get_selinfos = c_x.
t_layout1-min_linesize = 132.
ENDFORM. " f_build_layout
DATA: l_pgm TYPE syrepid,
l_exit(1) TYPE c.
CLEAR: l_pgm,
l_exit.
l_pgm = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = l_pgm
i_callback_user_command = c_user_command
is_layout = t_layout1
it_fieldcat = t_fieldcat1
i_save = c_a
it_events = t_eventcat1
IMPORTING
e_exit_caused_by_caller = l_exit
TABLES
t_outtab = t_result
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
l_exit = l_exit.
ENDIF.
To ALV F.M t_result table is updated with correct data.
But it is not getting displayed.
What can be the reason!
Can anybody give the solution!
Thanks for your replies.
Thanks,
Deep. -
Performance issue in Portal Reports
Hi
We are experiencing a serious performance issue, in a report, and need a urgent fix on this issue.
The report is a Reports From SQL Query report, I need to find a way to dynamically make/create the where clause otherwise I have to make the statement in a way the exclude the use of indexes.
Full-table-scan is not a valid option here; the number or records is simply too high (several millions its a datawarehouse solution). In the Developer packaged, we can make the where clause dynamically, this basic yet extremely important feature, is essential to all database application.
We need to know how to do it, and if this functionality is not natively supported, then this should be one of the priority one functionalities to implement in future releases.
However, what do I do for now?
Thank in advanceI have found a temporary workaround, by editing the where clause in the stored procedure manually. However this fix have to be done every time a change have been committed in the wizard, so it is still not a solution to go for indefinitely, but its ok for now.
-
Performance issue of BI Reports in SAP Enterprise portal -in SAPNW2004s
Dear friends,
We are integrating BI Reports in SAP Enterprise Portal 7.0 ( SAP NW- 2004s).The reports are running properly .But the issue here is reports are taking long time to open and leading it to performance effect.
Reports in BEX( Bi side) working lilttle better than EP platform.
And Even BI team is looking for ways to improve the performance.
Could you please share your ideas to implement in portal side to increase the performance.
Thanks and Regards
Ratnakar ReddyHello Mr. Reddy,
There are two possibilities for slow performance in BW reports, so we need to look into wether its slow in the BW system or at the frontend.
If the problem resides in the BW system then we should be able to trace the reports
and you can go for a SAP EW or GV sessin and SAP will provide recommendations.
If the problem resides at the frontend
Update the frontend servers to the latest frontend release.
Recommended Frontend Release 700
Recommended Frontend Patch 18
Update the frontend servers to the lates SAP GUI release as soon as possible.
Minimum Recommended SAP GUI Release 6.40
Your frontend PCs should fulfill the following requirements:
Each frontend PC should have 500 MHz and 128 MB main memory.
Because of a limit in the addressable memory, Windows 95 is not supported as Frontend OS for 3.X BW Systems. Please refer to SAP Notes 161993, 321973 and 366626 for details.
Please also check SAP Note 147519 "Maintenance strategy/ deadlines 'SAPGUI'".
If you still require any assistance from SAP support then raise a message under component ( probably BW-BEX-ET-WEB).
Provide your input, if you have any.
Thank you,
Tilak -
Performance Issue with VL06O report
Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
SuryaSreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
appending corresponding fields of table lt_select
where vbeln in ct_vbeln
and posnr eq posnr_initial
and parvw eq 'SP'
and lifnr in it_spdnr.
I don't see any issue with this query. I give more info later -
Issue in the Reporting feature of SAP BPC NW 7.0
Hi everyone,
I am facing an issue with respect to the Reporting feature in SAP BPC NW 7.0 version. I am supposed to generate a P&L report using the EVDRE function.
Issue-
In the report that I have generated, the system is retrieving only a subset of the broad-level P&L heads. e.g. while BPC is retrieving the EBITDA, EBIT and PAT figures, it is not retrieving the Depreciation, Interest and Tax figures in the report. All the members that are not getting displayed are members with ACCTYPE= 'EXP', while the ones getting displayed are members with ACCTYPE= 'INC'.
Even though the 'EXP' figures are not getting displayed, the amounts are getting deducted correctly. (i.e. even though Interest amount is not getting displayed in the report, the PBT figure being displayed is correctly calculated as PBT= EBIT-Interest).
Also, I am able to see the amount in Interest payments, if I drill to the base-member elements (G/Ls in my case)
Would really appreciate if someone could shed some light on what might be the probable issue.
Thanks in advance,
Sameer RaneHi Nilanjan/All,
Thanks a lot for your reply. I suppose, I was not very clear about my problem. The issue is with regards to the value for the Account-dimension members with ACCTYPE = 'EXP' and not with the members per se.
Setting the MemberSet Filter addresses the issue of getting particular Dimension members in the report. In my case, I am already seeing all the necessary members in my report (I have explicitly created a list of all the members I want to see in my report in the MemberSet parameter). However, I am not able to see any values for these members for any of the time periods (even though the values exist).
Also, I don't get any values for some of the INC items as well (e.g. OperationsIncome) inspite of the fact that the base member G/Ls under this account hold values.
Would appreciate any help towards resolving this issue.
Thanks in advance,
Sameer -
Issue with SSRS Report Exporting to Excel and word
Hi,
When report is exporting in word and Excel getting format issue, but same report export with pdf there is no issue.
Regards,
AfrozYou need to be always careful when export format is Word and specially Excel. Sometimes report result looks good in Report Viewer and PDF too, but it may not in MS Word and MS Excel.
You need to understand Word and Excel limitations and align all the data regions (Tablix, Rectangles, Texboxes) in correct way.
Also, you may post the actual formatting issue that you get. (With screenshot if possible)
Please read Limitation section in below:
Exporting to Microsoft Word
Exporting to Microsoft Excel
Refer:
Ten Common SQL Server Reporting Services Challenges and Solutions
-Vaibhav Chaudhari -
Variable input values issue with Portal reports in WAD
Hi Gurus,
We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
Regards,
YadaHi Hari,
Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
Regards,
Yada -
Text justification issue in crystal report
Hi,
I have MVC application with crystal report in it. I am exporting crystal report to PDF, everything except text justification (as we do in MS-Word) is not working. Even in crystal report viewer itself it's not working.
I have been trying since few days to solve text justification problem in CR. Well I have goggled a lot for this and found different available option to get the thing done. But that didn't solved my problem, I have read many replies on the crystal report discussion regarding the same but no result. I have tried four different versions of crystal report (13.0.5,13.0.6,13.0.9,13.0.13) as I found on the web that justify could work in these versions, but I was shocked when I didn't get anything useful.
For me it's like justify doesn't work in crystal report by any means. Can any one here tell me who has solved the text justification problem in crystal report. I have attached sample screen shot of word document where in I have specified my requirement of text justification.
Any positive reply would be highly appreciated.
-SunnyDuplicate thread - Locked. Please continue discussion here:
Re: Text justification issue in crystal report
-Abhilash -
Issue with email report in business catalyst
My weekly email reports for my muse sites have all started reporting zero visits since last week. If I login to the admin panel from the Manage button in Muse all the data is there. Anybody got any idea why the email reports would be showing zero hits yet the BC admin report shows data? See below
Both are separate issues where weekly reports show no visitor statistics and where explicit language phrases show as top search phrases on some sites. Please submit a ticket at BC support for us to investigate further as the issue is site specific.
Thanks,
Vinayak -
Out of Memory issue in crystal report 2008 SP1
Hi ALL,
I am facing serious issue in crystal report 2008 SP1.
When i am click the page setup in crystal report 2008 ,it is prompting like "Out of Memory".
Because of this i am not able to see the default printer in the page setup.
Please give the suggestions to resolve this issue.
Thanks and Regards,
VinayHi Ed,
What printer are you using as your default printer?
What happens if you change your default printer to Microsofts generic print driver? Only as a test to remove the printer being the cause.
Also, Go into Page Setup and check on Dissociate Printer..... and see if that fixes the issue.
Also, include all your OS version and patch level, Status of DEP, anti-virus turned off ( disconnect from your network while doing this test ) and Windows Firewall or any third party firewall and close all other software running.
Thanks again
Don -
Issues with BEx Reports in SAP Enterprise Portal
Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
VikashHI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash -
HI
We are having an issue in HR reporting and how to report this scenario.
If we know that all employees have two characteristics associated with their record, we are trying to report training hours using both characteristics -
Characteristic 1 has - professional, executive and so forth and the Characteristic2 has RN, Pharmacist, etc. My report needs to display:
Training hours
Professional (01) XX
Executive (03) XX
RNs (AAA) XX (all RNs are professional (01) but not all professionals are RNs (AAA)
How do we display both professionals and RNs in one hierarchy? If we create a hierarchy on characteristic 1 with the professional and executive, we are unable to also display characteristic 2 values like RNs, Pharmacists etc.
Any suggestions for a solution?
Thanks
KimAll of those items need to be in one characteristic for them all to display in a single column on 1 report.
So, you could create a 3rd info object and on the first pass through your data package in your start routine, load professional, executive, etc... then pass through the data package again appending your RN's, Pharmacists, etc...
This will double all values in your report, but then I guess you expect that because of your requirement.
Typically, I would include both characteristics in the report and then let the user drill down on whichever characteristic they wanted to display. It's a lot easier for you, doesn't take any extra development time, and the user gets the data they want (just not in the preferred format). But then again, with the requirement you have, your user will probably turn around and complain that the number of hours are doubled when they look at the total. I would point that out first and see what they say ... your requirement may change!
Brian -
Authorization Issue in Inventory Reports
Hi Experts,
My clinet is using SAP B1 8.8 PL11 and we are facing issue in inventory report, we have set proper authorization for the user, but when that user try to open any inventory report, it allow to select paratmeters for the report but when he click on ok button to generate reports system throw erro YOU are not permitted to performed this Action.
We have given full authorization to for all inventory reports.
Pls. tell me if i missed something in general authorization.
Regards
Kamlesh VagalHi Kamlesh...........
One Module is Report where Inventory reports are there.
think your have given authorization to this module, But another Inventory module is there
where Invetory reports are there. I guess you have not given the permission for this Inventory Reports.
Give Authorizations to both modules and then see the effect.
Regards,
Rahul -
How to issue cash flow report?
Hello everybody:
Can anyone tell me what is the standard method for SAP to issue cash flow report? Is it Cash Budget Management?
I am using SAP version 470.
rgds!
Andy.Could you give me more explanation on the logic of SAP how to issue cash flow report?
Andy
Maybe you are looking for
-
Dear friends, We are needing to send some POs by email with an PDF attached. Does anyone have the steps to generate this pdf ? best regards, Alessandro
-
TS1424 MSVCR80.DLL file newest version of itunes won't open
how do i fix this?
-
Not able to print a sales order
I have maintained the sales order output. Although, I can preview the sales order, I can't print it. Any idieas why?
-
How to Compare Lists of Objects
Hello All, I have two lists(self developed; not using Java's inherent list functionality) containing objects of the same class. Now I would like to compare the elements within the lists one on one. Meaning, I would like to compare the two lists to se
-
Hi, Does anyone have any SQL to show Purchasing hierarchy employee positions, limits etc? Many thanks