Issue on Info Record Transfer?

Hi Friends
How to transfer info records from MM to EBP/SUS.If it is through Middleware which filter settings need to be set in SRM 7.0. i heard that this functionality is std functionality in SRM 7.0.
Thanks
Timothy

NO Timothy.
SUS is supplier hosted system . here we do have only vendor data mainly.
In EBP_SUS - your source of supply might be local contract/ vendor list .
in classic you can referer (MM_SUS) inforecord and back end contract.
mainly here your procurement system in EBP in EBP_SUS.
br
muthu

Similar Messages

APO CIF issue - Purchase Info Record not getting CIFed from R/3 to APO

Dear All,
We are unable to CIF Purchase Info Record from SAP R/3 to APO. Are there any special setting that needs to be done for the same. We have created an Integration Model and using tcodes CFM1/CFM2 but without any success. Can anybody throw some light on this issue?
Thanks in advance
Ehsan Ahmed

Ehsaan
Can you check the SLG1 logs in R/3 and APO sides for further clues? Try to confine the time range to the exact time of activation of Purch INfo record model.
Maybe you have already done this check. Can you go to the Purchasing tab of Material Master and see if the Source List checkbox is unchecked ? Do you have any special procurement keys defined by any chance ?
Regards
Srinivas

Costing issue-Why Info record price is not read ?

Hi,
We have an issue while costing a Material procured externally.
Valuation Variant >>> Priority 1-Info record price. >>Priority 2-Material Master valuation price.
However, system is picking the price matained in the Material master.
I have verified the validity of the info record and the Blocks on the Vendor and seems ok.
Are there any specific checks need to carry out to know if the info record is a valid one.
Any idea why system is picking Price from Material Master?
Your help is appreciated.
Kind Regards
Umapathi G

HI Umapathi
Does any scheduling agreement exists for this info record
refer this link.. This issue is pretty common these days and has been discussed many times in the forum
CK11N- Material cost estimate with & without agreement
Regards
Ajay M

Info record multiple BOM version - problem

Dear Experts,
We are facing one issue with info record.
In our business scenario, we have two sub-contractor BOM with same FG
Component , But while create purchase order system pickup 1st BOM ,
We have facility to update version in info record i.e. one, we have also maintain source list
We need both BOM in same vendors.
How to maintain two versions in info record & it is explore in sub-contracting purchase order
plz guide us.
Thanks & Regards.
Santosh....
Edited by: Sanjeev Shrivastava on Mar 7, 2012 2:06 PM

Hi,
This is not possible in std.
You can develop an enhancement to display a pop-up of diff. BOM versions while you click on Explode BOM in PO and select the required version.
We had similar reqt and this is how we did.

Consignment info record issue

hi friends,
while doing consignment , I am getting the folowing error
"purchasing info record not found in pur organization 1000"
I am not using pur org 1000 and i maintained info record as per my pur org only.
thanks
raj

HI
If several purchasing organizations procure for a certain plant, you must define one of them as the standard purchasing organization for the transactions "pipeline procurement", "consignment" and "stock transfers".
Use the following path
Enterprise Structure: Assginment: Materials management: Assgin standard purchase organisation to plant.
In your case youmust have defined your purchase organisation as standard purchase organisation.
regards
girish

Error in CIF for Purchase Info Records

Hi,
I am trying to CIF Purchase Info record from R/3 to APO but its getting stuck during activation "generating delta Model".
Can anyone please help in this regards, I have already read the link related to BD22 but which message type do we need to delete. Also what can be the other reason.
I have CIFed Plant, material, vendor in the same sequence also I have extended material to vendor manually in APO.
I have one more issue the vendor code 1000000 in R/3 is getting create as 0001000000 in APO can this cause a problem
Thanks,
sanjog

Hi Sanjog ,
Iam not sure why you are looking at tcode BD22. It is not relevant to PIR transfer .
Also to CIF the PIR for a material from R/3 to APO, it is not necessary that the material should exist in the vendor location in APO. (You need to create the material at vendor location only if it is required specifically for your business scenario).
Now , to identify what is causing the problem , you have to check the inbound queue in APO and outbound queue in R/3. The tcodes are SMQ2 and SMQ1. You can also use the queue manager /n/sapapo/cq in APO . Check what the error message is and correct the master data in R/3 accordingly. Then delete all blocked queue entries (/sapapo/cq can be used ) and then run the PIR CIF activation again.
Thanks
Saradha

Price Date Datermination in consignment Info Records

Hi
We are using consignment with some vendors and we have defined consignment info records with them with different price conditions for different dates.
It is possible when transferring materials from consignment stock to our unrestricted stock, picking the price corresponding to date of the PO and not the price corresponding to the date of the transfer?
In the info records (ME!u201D) this issue can be performed with the field Price "Determination (Pricing) Date Control" set to vale "Purchase Order Date" I have tested it and it seems not to work with consignment info records
Many thanks in advance

Hi,
Try using price date field from Vendor master purchasing view
Else give different validity periods for info price
Diwakar

Customer material info records are not getting displayed in Sales order

Hi ,
We are upgrading our client sap system from ECC 5.0 to ECC 6.0 .We are now in the testing phase .An issue came up regarding customer material info records .
When we are creating a sales order using VA01, after entering Material number and order quantity for an item if we press the ordering party tab(before saving the sales order) the customer material info records (value in cutomer material number) are gettting displayed.But if we save the sales order we are not able to see the customer material info records.
kindly guide me in this issue .
Thanks in advance .
Nikhil

hi nikhil,
check the tick box in vov8 "read info record",and when you create sales order(va01),dont enter the material number enter the "customer material number" and see whether you are getting the material number.
and also go to (va02) and check whether you are getting the CMIR details.
pls explain me the problem in detail for my better understanding
regards
senya

Not allow order unit in INFO record if it is not in material master

Hello there!
In standar SAP any user can introduce any order unit in the info record, even if it is not maintained in the material master alternative units of meassure. We need to block this...
The conversion factor is not a problem for us, as we can set it only for display in the customizing, so that the systems brings it automatically from material master
The idea is to allow as order units only those units of meassure that exist in material master.
We have been checking if it is possible, but no success...
Any idea on how to get it? Error messages, user exists, or so on...
Thanks!!
César

Hey vmendoza7785,
Congratulations on getting your new iPhone. I'm sure it is frustrating not being able to do everything you want with it. Let's see if we can get your backup started.
If you are having an issue with being unable to make a backup of your iPhone with iTunes, I would suggest that you troubleshoot using the steps in this article -
If you can't back up or restore your iPhone, iPad, or iPod using iTunes - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Multiple Consigned Info-record Based on MPN

Hi All,
We have an MPN Profile that has a setting of - MPN Mandatory & Info Records for MPN. This MPN Profile is assigned into an Internal Material which will be managed with our Inventory.
We have multiple MPNs from a Single Vendor with different price and that is created separately in the Info-Record.
When the PO is created with the MPN, it is working fine by selecting the Internal Material and I am able to do GR for that PO which comes in Stock as Internal Material.
However, my problem is that I am not able to create a K-Type PO for those MPN, as system prompts error messages like MPN008 => "Consignment and MPN mat. only possible in case of info recs. for IM mat."
I have gone through the SAP Help and it is also mentioned as a NOTE in there : If you are working with consignment info records, you must create the info records for your firms own material. Reason: in the case of goods issues involving consignment materials, the system searches for the info records for the firms own, inventory-managed materials and does not take MPN materials into account.
I have a question now => Does SAP allow the Consigned Process to be practiced for MPN Materials?
Any suggestion/idea/solution is most welcome!
Regards,

Hi Rahul,
Thanks again for your reply!
I did the way you suggested and I was able to create Consigned POs for the MPN. However, my problem is still un-resolved, as you can see the problem from the following process steps.
1) GR for the Consigned PO is done and now the IM Material is in the Vendor Consigned Stock.
2) I have pulled the Quantity via Tcode MB1B/411-K.
3) When I run the MRKO (Vendor Liability Settlement), system took the Consigned Info-record of the IM Material (which is only 1).
_Problem:_ System while doing MRKO, is not considering the MPN Inforecord, as I am not able to create Consign Info Record for MPN Materials.
If you are not clear about my scenario, I can explain in detail.
Regards,

Purchase Order is not Picking Price from Info Record.

Dear All,
User had created a Shopping cart in and an automatic Purchase Order is created which is picking the material price from Purchase Requisition but not from Created Inforecord. As checked in P.R at item level it is found that in VALUATION tab there is a field named as " P.O PRICE " , here defalt t selected as " 1 A Gross Price "., Can u please help that from where this field is automatically selected as Gross Price in Purchase requisition.
Thanx n Rgds,
sap11

This is the config done in the OMET transaction where you will see the Adopt PO price field is checked and now this funcitonal authorization code e.g. 01 assgined to user profile in SU3 transaction agianst the parameter EFB.
if this is active than it will not take price from info record but it will copy from PR.
to avoid this kind of issue -
Remove the EFB value in SU3 for particular user or if user needs to have the EFB profile for some other requirements than go to OMET and remove Adopt po price indicator from that profile which is assigned to user

PO without Info record Updation

Dear All,
I hope you all are fine and this is my first message to this forum.
We have a client specific requirement and in that client wants PO without Info Record updation. Info record will be there but for Material and Vendor only not for Price.
The situation is when we create a PO, the Price will not be pick up from Info Record conditions and from last PO Price.Means we have to manually enter the price and the info record will not be updated for price and cleint's other requirement is in the info record Order price history is not to be updated when any PO is created.
Please let me know the steps if anyone works on this issue.
Havea good day
Regards
Lovkesh

Hi Lovkesh,
First of all dont create a info record manually.
Just go a PO with inforecord indicator turned on.
this will make a info record to be created automatically by the system when u post the PO.
this inforecord will be with or w/o plant depending on the setting u specify in customizing under define condition control at plant level in SPRO.
then under customizing for buyer values select not to copy from the last purchasing document.
info record gets updated in 2 ways normally 1> from previous PO document 2> from conditions entered manually or if the info record update was turned on in any of the purchasing documents.
after blocking these 2 ways info record will not get updated.
also make sure in ur case for the material and vendor combination there exists any quotation or agreement orcontractbecause inforecord gets updated automatically if it is turned on(info update indicator) in these purchasing documents also----if any of these exists then select no update of inforecord in all of them.
reply me to get updated
raja.

PO type UB is pulling in a Purchase Info Record - should this happen?

Hi All,
I've been looking around the net few a few days, off and on, but I can't find an answer.
A colleague has created a Purchase Order type UB but it is bringing in a Purchase Info Records that relates to a different receiving plant. This is bringing an incorrect tax code into play.
The work around is currently as follows
Go into the (incorrect) PIR that is being engaged
Remove the tax code
Process the PO
Go back into the PIR and change the tax code back to it's original setting,
Am I correct in assuming that PIRs are not engaged in a UB transfer?
What should be done to stop this from happening
Apologies if this is obvious or if I have not given enough info.
Cheers
Colm
Edited by: Colm McCann on Dec 10, 2008 2:56 PM

I know that I need info records for UB order if I work with APO.
Are you sure that the inforecord that is pulled is for a different receiving plant?
Is the info record really created at plant level, or only at purchasing org level?
And both plants share the same purchasing org?

PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

CK11n Costing Run does not pull purchasing price from info record.

Hi,
I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
The costing run does not pick up the purchasing price from the purchasing info record but
instead incorrectly picks up the standard price from the material master (Costing 2 view).
Can you please help me solve this issue?
Thanks,
Ketan

Execute OPL1
or
SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
Click Detail Button
Click Valuation Variant Button in the Control Tab
Change View Valaution Variant Detail Screen Appears
In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
You can list down Priority 2 to 5 depending on your requirement
This would solve your problem
Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

Issue on Info Record Transfer?

Similar Messages

Maybe you are looking for