Issue on Number Range for MRP Purchase Requisition

Hi Gurus,
Please help me on the issue explained below.
We are already using SAP ECC 6.0 and SRM 5.0 and now we are implementing Plant Maintenance Module.As a result of this implementation ,we have created number of PR document types and assigned to unique number ranges in ECC. One of these document types has been maintained for MRP group for a material type in order to identify the MRP purchase requisitions created on the shortage of the materials for these material types.
This functionality is working fine. MRP run for the materials is picking the appropriate PR document but number range of the document is not the same what was assigned to the linked document type.Some other number series is getting picked by system .
There is setting under SPRO Consumption Based PlanningNumber RangesPurchase Requisitions
Here, number range assignment is against plant. This is the same number range which is being taken by system on running MRP. But the desired number range is the one which has been linked to PR document type.
If I change the number range above then number range for MRP PR in present system will get affected..
Can you please advise me on above so that PR generated on MRP run should have appropriate number range?
Thanks & Regards,
Niti

Hi,
As per my understanding, what you have mentioned above is exactly the way SAP is designed. Its SAP Standard behaviour.
But if you check your PR document type - no:range & the CBP no:range both will be same only since both refers to the same object.
Please check the PR document type that you have assigned in the CBP & its no:ranges.
Thanks & Regards,
Ram

Similar Messages

Query for MRP Purchase Requisition

Hi Gurus,
Currently system is creating Purchase requisition for BOM Material, which I don't want system should create PR for this material.
I know MRP type ND but i need someother ways to stop it
Appricate your response
Thanks
Sastry

Hi,
You can try the following option-
1) Tcode - MM02-> MRP1 view - > Plant sp-matl status - 01 ( Blocked for procment/whse)
2) Tcode - MM02-> MRP2 view - > Procurement type - Blank(No procurement)
Sudarshan

Number Range for Purchase order

Hi MM Masters,
Kindly give the solution in SAP for the following scenario.
The organisation consists of 5 company codes and 16 plants.
How to maintain the Number ranges for the Purchase orders Plantwise?
This requirement is for easy identification of Purchase orders on the basis of plants.
Like for Plant 1 - 4500000000 to 4500050000
Plant 2 - 4500050001 to 4500060000
Plant 3 - 4500060001 to 4500070000 etc.
Kindly guide me. This requirement is urgent.
Regards
Yoganarasimha

Hello Raj,
You need to define number range as usual, but when using the user exit at that time you need to give logic as per your requirement. Purchase order will allow to create two different line item for two different plant under the same company code so you need to consider that also (if using company specific or multi plant assignment for one purchase organization).
Work with developer for coding and expain him/her the logic, I am not technical expert so regret for not helping on coding.
Hope this helps.
Arif Mansuri

Number Range for Purchasing Groups

Dear All,
I need to assign different number range for purchase order for different purchasing groups of same dosument type. In fact we want to distinguish purchase document depending on number range for different purchasing groups.
Regards,
Vikas

Hi,
Document type concept is used when your procurement process is differ from standard procurement processes , that time you can go for u201CNew document typeu201D. For example: Standard procurement document type is u201CNBu201D when you have procurement processes like sub-contracting and formal order, that time you used different document type other then u201CStandard document typeu201D with new respective number ranges.
Also you have a way to keep different document type with number ranges if two company code there & your business required to have PO document type with number range W.R.T. Company Code then can use User Exit M06B0003 ,MM06E003 & M06B0004 where you have option to have PO number range based on Company Code.
But as you required different number range for purchase order for different purchasing groups, You can use centralized & decentralized purchasing groups & can have centralized & decentralized PO document types and can control all authorization in basis side.
Regards,
Biju K

PR number range after MRP is not triggered

Dear gurus,
              My MM consultant needs a seperate number range for Purchase Requsition during the MRP Run.I have configured in Plant Parameters number range for PR and also since we are using the MRP Group.I have configured the purchasing doccument type in MRP group.But after MRP run system generates the different number for purchase requistion other than the configured.If i create manual purchase requsition it is creating in my number range(correct number range).ie)My requirement is sytem should generate seperate(correct) number range which i configured in Plant parameters.Can any body suggest what are the configuration missing in my end.
    For your information.The Raw materials are extened to new plant
                       please give your valuable comments and suggestion
                                                                                -guna

Dear Prabosh,
we are doing the rollout implementation.
          My problem is i am not getting the correct number range for MRP generated Purchase Requistion.The PR number which is generated by the MRP system is 11194121(which is the no range configured for another existing plant.the same material is extended for new plant).(In mrp generated PR,doccument type is correct only the pr number is wrong.)But I have configured the different number range(range 2800000000) for Doccument type.Please see my configuartion.If i create manually with docc type vad it is picking the correct number range280000000.but after mrp also the number range for pr should be in 280000000 series.this is my problem.Mr.Pradeep told that "pr number range which is is generated by MPR syststem should always be different.if we create manual pr against the same material the number range will be different.".
            we are doing rollout implemenation.i checked in existing plant with existing material.first i create the manual Purchase requstion.the number is 11193212.The PR number which is generated by the MRP system is 11193215.I checked the PR no 11193213/11193214.But it is not exists.whether any configuration is left in my end? any user exits will be used by this? Please go through my configuartion and suggest.
Please help me.since we are in Testing phase.It is very urgent issue.please help me
              i have already send the screenshots to yur id also
guna

Multiple number range for planned order

Hi,
I want maintain different number range for MRP related planned order and manual creation planned orders. I have checked OPPQ and OMI2 transaction but i could not get any clue to create different number range for same plant. Let me know is how we can create.
Regards / US

Hi Uma,
number range is dependent on plant alone and I don't think there is an user exit or badi to change number range at planned order creation.
I guess the alternative is an enhancement or using some other field to determine what planned orders are manual.
regards,
Edgar

Number range for service master record

Hi..
i have an issue in number ranges for service master record.
when i create a service master record system is generating number ramdomly, its not in series..
where do i make the settings so that i will get service master number ranges in series...
Regards
Sarfraz

Hi,
Follow the path:
SPRO ->Material Management -> External Service Management -> Service master -> Define Number Range
In menu ->Group-> maination->Aagian Group-> Insert
Now Enter
Number Range Group Text     01( example)
From Number      80000000
To Number     89999999
& save.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Apr 4, 2008 8:45 AM

Is it possible to define a seperate number range for purchase requisitions

Hi Experts,
Is it possible to define a seperate number range for purchase requisitions that come from Forecast vs normal MRP requisitions so that our purchasing department can identify the origin of the document?
Thanks
for the thoughts
Sreeni

You'd need to figure out manually how forecast PR's are different from MRP PR's (the field from PR tables ) and then in the user exit I mentioned the program looks at the table T161 and field NUMKI, and if the PR getting created is from forecast change that NUMKI in the program to a different one else keep it as it is. If you're know abap programming it won't take long to figure out the logic else work with your developer to implement it.

Different number range for Purchase requistion

Hi,
While converting Planned order to Purchase requisition (Manual Run), i need different number range for Purchase requistion for different plant.
I maintained different number ranges in OPPQ, and maintained number range in OMI3, the number range which i ahve maintained as per the plant are seems to be not working.
Can somebody help me in this..
Kariya...

hi,
Please define the number ranges with respect to the MRP group OPPR,OM12 and OM13 with respect to the plant and try hope it helps
Regaards
sravanthi
Edited by: Sravanthi683 on Jul 10, 2009 8:58 AM
Edited by: Sravanthi683 on Jul 10, 2009 9:00 AM

Number Range for PR converted from MRP Run

Dear Experts,
We are experiencing problems with our number range when converting our MRP generated planned orders into PRs. We convert planned orders to purchase requisitions using MD03. We have 1 Plant with 2 MRP Groups which assigned to specific document types and number ranges as well. For example:
In T-code OMI8:
Plant AAAA --> Number Range 1111111111
(Because 1 Plant only able to have 1 number ranges)
In T-code OPPZ:
Plant AAAA, MRP Group : A01--> PR Document Type : ZZZZ
Plant AAAA, MRP Group : A02 --> PR Document Type : XXXX
In T-code SPRO "PR Document Types" and "PR Document Ranges"
PR Document Type : ZZZZ --> Number Ranges 1111111111
PR Document Type : XXXX --> Number Ranges 2222222222
When I run MD03, the result is:
MRP Group : A01 --> PR Document Type : ZZZZ --> Number Ranges : 1111111111
MRP Group : A02 --> PR Document Type : XXXX --> Number Ranges : 1111111111 (Why the number ranges is not 2222222222 ???????)
Does anyone have idea? Please help. Thanks a lot..

Hi Mallinath,
thanks for your info.
Note 46919 has been implemented in the system, and also i have maintain Tcode - OMI3:
* Object Type : 2 (PR) --> PR Document Type : ZZZZ --> Internal number range : 1111111111 --> external number range : " " (blank) --> Reservations : 01
* Object Type : 2 (PR) --> PR Document Type : XXXX--> Internal number range : 2222222222 --> external number range : " " (blank) --> Reservations : 01
But still system pick wrong number ranges (1111111111, instead of 2222222222 ) for PR Document Type XXXX if generated from MRP run.
Do you have any other idea? Thank you.

External number range for purchase order response?

Hi all,
is it possible to use an external number range when creating purchase order responses (BUS2209, PCO, POR) manually?
If I transfer the POR from an external system like SUS via XML, can I use an external number range?
I'm using SRM 4.0 (EBP 5.0) in standalone scenario with Business Connector 4.7 as XML interface.
Any help is appreciated,
Karsten

Hi
No need to maintian Internal number range.. Yes you need to use an external number range
Only the PO, RQ & RS are sync and therefore must correspond with the R/3 number ranges.
The rest, Shop Cart (SC), Local PO (EBP), Confirmation, Invoice, Bid Inv and Bid, aren't synced and can be assigned to any number range. (FYI- using ECS)
Re: Extended Classic - Purchase Order Number Ranges
http://help.sap.com/saphelp_srm50/helpdata/en/87/7cc73cee4fb55be10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
Re: Number range config
Re: config for Number Ranges ? :-(
Re: PO Creation with external PO number
Purchase Order Response BUS2232
PO number range Issue
Re: Defining the number range
Regards
- Atul

Material Number mandatory for PR exceptP for Service Purchase Requisition

Hi All,
Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
rosh

hi sridhar,
Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

Number Ranges for Purchasing Info Record

Dear Guru's
Number range interval for Purchase info record can be created and assign to group and there are two group for Stock and Non Stock materials.
Now my query is how the system pick the number range ??? Since we don't have any assignment like PR,PO
My requirement is we have 3 company code - I need to have different number ranges for purchase Info record for each company . Guide me to achieve ...
Thanks in advance
Regards
Anand

SAP has provided only Two standard document Types for Pur. Info Records.
IL for Stock Material ( with matl No.)
IN For material Group (w/o MMR).
By default, if you enter Matl No. in the initial screen, system automatically picks the doc. type IL and the no. range assigned to it.
If you're not entered matl. no. in the initial screen, and proceed the Transaction further, system picks the doc. type IN and prompts you to enter Matl Group.
In the second case, the system picks up the no. range as per assignment.
Here in your case, you want create a new no. range and assign to your IL/ IN.
For this, you go to the transaction Define No. Ranges in Inforecord, from menu bar, choose Group-> maintain. Here you maintain your new no. range with a name. Now your new group is created with your required no. range.
Then select your new group ( Check box), select, IL, and click assign button and save.. Your IL is assigned to your new group and system picks the new No. Range when you are creating a Inforecord with Mat No. Similarly, you can change No. range for IN also.
or one more option you have.
In the first screen of No. Ranges Transaction, select change intervals tab button, you'll be goto intervals screen. There, from Menu bar, choose Interval-> change current No. Then you reset your current no. to Zero, save it. The again choose Change Interval, then in that screen, change the Interval with your new no. range.
Here in the second case, u need not maintain new groups. Just changing the Interval for the existing group.
You can adopt any one of these options.

Purchase Requisition Release strategy for MRP based Requisition

Hello Gurus
We want to set up the urchase Requisition Release strategy for MRP based Requisition ..Any can one Please share your experience about the impact down the road?
Thanks
Nick

Hi,
If you want include the MRP related PR in Release strategy.
You need to include the field CEBANESTKZ-Creation Indicator (Purchase Requisition/Schedule Lines) in one of the characteristics which you create and include the characteristics value as per the field values like AReal time, BMRP, CConverted Planned order etc.. and include the charactristic in the Release Strategy will release group & release codes.
So when ever the PR is created through MRP run then this creation indicator will update in the PR as per that release Strategy will trigger in the PR.
there is one more option you need to create the separate document type as MRP PR then create document type as characteristics and include the values of all these document types and include in Release strategy.
But it will not pop up for direct PR from MRP run only trigger when planned order is converted to PR manually there you need to select this MRP document type then release strategy will trigger.
I think first one is best suited.
rgds
Chidanand

Issue on Number Range for MRP Purchase Requisition

Similar Messages

Maybe you are looking for