Issue on profit center group and profit center group hierarchy

hi experts
I have a requirement where i have profit center,profit center group and profit center group hierarchy.
profit center group and profit center group hierarchy are same?if they are same how to get them into BI.if they are not same how to get them into BI
im using two datasources 2lis_11_vaitm and 2lis_12_vcitm,how to connect the profit center group and profit center group hierarchy with the datasources,My dataflow is on top of these datasources there are two write optimised dso and on top of those w-o dso there are std dso and on top of the std dso there is a infocube.on infocube there is multiprovider
Thanks,
sivaram

Hi Sivaram,
Profit Center would be an attribute of any object which is used in the 2lis datasources. maybe CO Order or WBS etc...from these objects Profit Center should be or could be made as navigational attribute.
Further you can load the master data and hierarchy from the datasource 0PROFIT_CTR_0106_HIER
Hope this helps.
Good Luck.
Vikram

Similar Messages

Consolidation group Hierarchy - rollup calculation issue?

Hi,
I am facing an issue with my consolidation groups hierarchy (created in SEM BCS).
We have a new conso group hierarchy starting for our plans 2010 : we have new nodes (zones), new leaves (new Business units) and some BUs moved fom one node to another one.
Level 1 ZONE
Level 2 BUSINESS UNIT
(simplified hierarchy since we have sub-zones)
in a Bex report, I fixed this new consolidation group hierarchy in selection (in filters) (to be able to select the new zones, the new Business units etc.)
I can only get figures for one version and one fiscal year/period with this report.
Results :
-When i call a new Business unit, i get the correct figures, but when i call its higher level (the zone), the figures of this new Business unit are not included.
-If i call a new zone, i don't see the proper figures with the sum of its BUs + elimination between the BUs of the zone : i just see the eliminations between its BUs.
I checked the master data synchronization between BCS and BW and everything looks fine.
Has anyone had the same issue? Is there any solution?
Many thanks in advance
Armelle

error on the version.
Version not specificed in the ABAP code used for the exit

Transport cost center standard hierarchy & profit center herarchy

Dear All,
Pls guide how to transport cost center standard hierarchy, cost center groups, profit center hierarchy and profit center groups from config client to production?
Regards
Komal

Hi,
For CO data go to OKE6 transaction and create a change request.
For PCA, go to 0KEQ and do the same.
Regards,
Eli

Change a profit center Standard Hierarchy

Hello,
How do i change a standard hierarchy for profit centers which is already assigned in 0kE5.
Currently there are no transaction data in the system.However the profit centers are already assigned to the standard hierarchy ABC.
We now want to change the standard hierarchy to DEF.
Is this possible?
Thanks & Regards,
Rajeshwari

Hello Murali,
Thanks for the Quick reply.
We did try using the transaction KCH4 and delete the profit centers/profit center groups assigned to it.
However we get the following message for the same:
This function is not allowed in the standard hierarchy
Message no. OH 040
Diagnosis
You are directly processing the standard hierarchy (cost centers, business processes). The following actions are invalid for individual values:
Inserting groups that already contain values
Removing/deleting groups that already contain values
You are processing the profit center standard hierarchy or any other alternative hierarchies that contain parts of the standard hierarchy. The following actions are then invalid for individual values:
Delete
Insert
Reassign (delete and insert)
Removing groups that already contain values
Inserting groups that already contain values
Procedure
Undo the change you wanted to make.
Hence we are unable to even remove the profit center groups within the group ABC.
Is there any other way?
Thanks & regards,
Rajeshwari

How to make changes to profit center standard hierarchy?

Hello!
I have to make changes in standard profit center hierarchy. Should I make the changes in IMG or Sap Easy access -screen? If I make changes in IMG, could you please tell me the right path where can I find it?
Another question, if some profit center is in the wrong place in stardard hierarchy and I want to transfer it to another place (under other node for example), how is this done? Should I delete this profit center first (I tried delete but it wasn't possible..) or can I just transfer the profit center?
Thanks!
Points will be given!=)

Hi,
in the IMG you can maintain the profit center standard hierarchy via TA KCH4. The path is:
-> Controlling
-> Profit Center Accounting
   -> Master Data
    -> Maintain Standard Hierarchy
The transport of the profit center standard hierarchy is done via TA 0KEQ, (this is relevant for both KCH5N and KCH4).
IMG Path:
-> Controlling
-> Profit Center Accounting
-> Tools
   -> Transport Customizing Settings
Hope I understood you correctly.
Regards
Karl

How to I contact Apple about a support issue with Game Center--itself, directly. I changed my Apple ID and now I cannot access my game center account that I had previously. It created a new one for me with my new apple ID instead of keeping the old one.

I want to submit an issue with Game Center--itself, directly. I had an account set up that I used to play online games. I changed my appleID and then I no longer could access my game center account. I, apparently, had a new game center account created for me (which is friends with my old account) and now I cannot access my original game center account.
If I can't get access to email apple directly (which seems ridiculously difficult to do), then someone please tell me how to FIX the issue.
Thank you

Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time.

Profit center wise hierarchy

hiiiii...
by which t.code we can see the profit center wise hierarchy?
Thanks & Regards
Rekha Sharma

HI
KCH6N
Vijay

Profit Center Standard Hierarchy in Production Server

Dear All
I have done Controlling Area Settings for Profit Centers via TCode: 0KE5. I have made Profit Center Standard Hierarchy in Development server. The same Standard hierarchy is available in Quality sever but it is unavaliable in Production server.
Please guide me.
Thanks & Regards
Kanwaljit

Hi,
You should check if the transport with the relevant configuration has passed to Produciton. Anyway, you can create new one via 0KEQ transaction.
Regards,
Eli

Issue with Game Center Accounts

I believe this was posted previously by richardgraham90, but i am having an issue with game center. It seems that i somehow have two active game center accounts under one apple ID. I have been using one ever since i got the itouch 4, and just a few weeks ago game center asked me to create another account? im not sure why, but now whenever i open games it asks me to log on to game center, as if my previous game center account isnt working. my old account had all of my freinds and achievements on it, and this new account has nothing. i was just wondering if it was possible to delete this "secondary" account that was somehow created on my apple id. this is a very annoying glitch and game center will not stay signed in to my previous account. if anyone has any ideas or fixes regarding this, that would be extremely helpful. thanks

hey mate, i just updated my software, and it fixed it

Batch not determined in MIGO-Goods Issue for cost center

Hi,
We are using Batch Determination while posting Goods Issue to cost center. However, when we enter * in the batch field system does not propose the batches.
We have done following settngs
Strategy type ME01 which is SAP standard
Batch search procedure - ME0001
Search procedure ME0001 is assigned to movement type 201 in "Allocate IM Search Procedure/Activate Check"
Sort Rule - 01 using charecterstics (ascending)
Class - BATCH_MASTER created
Characterstics - Size, Shape, Color (No table or field are maintained in Addional Data) assigned to this class.
Material is maintained with classification and batch management active.
Master Data - Search Strategy is maintained using t code MBC1 for stratefy type ME01 (Key combination Movement Type/Plant/Material). Selection criteria - Values maintained for characterstics. Sort Rule - 01
Now when we are issuing goods to cost center and enter * in batch field, system is supposed to suggest the batches (material is in stock and batches are available). However, system does not give pop up.
Am I missing something? Where is the batch determination button as system is giving message to use button?
Shekhar

Thank you for the answer.
It gives only one batch and not all the batches. Why it could be?
Shekhar

Issue making Cost Center Hierarchy Time Dependent

Hi,
We have three hierarchies on top of cost center and cost center was not time-dependent. There is a new requirement to make one of the hierarchies time dependent. To faclitate it, I changed the hierarchy property in cost center infoobject to "Hierarchy structure is time-dependent" and then loaded the hierarchy.It took the validity dates of 1.1.1000 to 31.12.999. A costcenter was changed from one node to another in ECC and was extracted into BI. As time-dependency is set, I thought that node will have two entries now one with validity period 1.1.1000 to 30.10.2009 and another with 31.10.2009 to 31.12.999. But instead the hierarchy was overwritten and only the latest change is refelcted.
Can someone please help in figuring out the issue. Should some change be done in ECC for time-dependency to reflect.
Thanks
Achyuta

Hey Achyuta,
The hierarchy needs to be time dependent in the source system and then the datasource for the time dependent hierarchy would then need to be replicated again. You'll know if it's right after the replication if you view the datasource in BW and the Data is Time Dependent check box is checked on the General Info Tab. Once the datasource is time-dependent, loads should populate the DateTo and DateFrom as you expect. Consult your R/3 expert if you need help over on the source system side.
Peace,
Dan Glick

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Good issues to cost center with extra charges 10% from cost

Hiii Guy,
My user would like to charge the cost center 10% from cost when good issues to cost center is perform,
can we do it in sap ?

The scenario is like this,
Only Merchandise Department have the authority to ordering merchandise item from vendor, when other depart required that merchandise item, Merchandise depart will perform GI to that requested cost center.
So Merchandise Depart would like to have extra charge on there extra work.

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

Issue when 2 consolidation group hierarchies used in one single query

Dear experts,
I have an issue.
I need to build a query where we compare our forecast data (figures for year end 12.2009) to our plan 2010 data.
The problem is that we changed (in our consolidation system SEM BCS) our consolidation group hierarchy for next year only , (for the plan : the change has been done from march 2010 on the version P1 used for the plan)
Ex :
In forecast the structure is as below :
We have a zone France/Spain/Portugal that includes :
1. the business unit France 1 and the business unit includes the french company AFrench company Bfrench company C
2. the business unit France 2 with french companies D, E.
3. the business Unit Spain : with spanish company A, B C etc.
4.The business Unit Portugal : with portuguese company A, B, C etc.
Our Plan conso group hierarch is as below :
We have a zone FRANCE (France/Spain/Portugal does not exit anymore) that includes :
1. the Business unit France 1 with french Companies A, B and C
2. the BU France 2 with french companies D, E
In my query i want to compare a business unit profit and Loss Forecast Versus Plan.
If i select as a consolidation group, exemple the business unit France 1 (which no longer has the same Zone above but still exists in the hierarchy), I have the following error message :
"BW server error
Exception condition : "HIERARCHY NOT FOUND" raised."
My consolidation group characteristic is set up in both columns (forecast and Plan) with a hierarchy node variable based on the right hierarchy version and the right hierarchy key date, that is why i am now lost...
I have a doubt regarding the feasability of such query...
Many thanks in advance!!
Armelle

Thanks very much for your quick answer Naveen.
Actually i saw with our technical team yesterday that we may have an issue when creating a new conso group hierarchy
SAP note 957506
This problem is caused by program error in the CL_RRHI_INCL_CREATOR_TID class.
The error can occur if a hierarchy contains new characteristic values and if additional hierarchies for the characteristic are activated simultaneously.
We may need a support package to solve this.
As you said, both hierarchies are based on the same characteristic.
I understand that we need pro forma presentation to compare our figures.
But we always ask for Business units level figures, and the BUs level did not change, only the zones level.
Anyway i am blocked for the moment, since nothing can work with this program error (even all my old queries for which the consolidation group is mandatory).
I leave my question opened and will let you know if everything worked (or not) as I had expected.

Issue on profit center group and profit center group hierarchy

Similar Messages

Maybe you are looking for