Issue on transport to quality server

Hi all,
my basis guy has released all the transport requests to the quality server. But i cld not see any condition tables or access sequence copied in my quality server.
in SE10 there is only request on Pricing Procedure, there fore the pricing is been copied in quality but with descriptions of condtion types, access sequence and condition types .
plz suggest me what shld i do now in this case.
thanks in advance.
kumar

Hi Anil,
The transports pertaining to pricing procedure are client dependent ones whereas the ones related to condition table are client independent(Table creation)
So first check the objects of the transport which is now in Quality server in the previous server itself. Mostly it will not have any Atables (Atables are the condition tables).
First pls check whether the transport mechanism for client dependent and client independent tports are same or different.
If same, and if the objects are there in the transport in the first server, then check its log while transporting to quality server.
If different, please follow the procedure for client independent tports and move the condition tables .
I think access seq is again client dependent. So take care of condition tables and access sequences in different transports to take care of the scenario.
In our project the tport mechanisms are different for client dependent and client independent tports and hence we follow separate procedure for condition table and access seq(in 2 different transports)
Pls assign reward points if it helps. Let me know if you need further info.

Similar Messages

'Screen does not exist' error after transported to Quality server.

I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
Please tel me what should I do to solve this issue. Its very urgent. Please help.
Thanks
Johan

Hi
You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA server?
I would suggest this:
In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
If you have trouble importing into the QA server, please provide the transport logs here.

Getting DC-broken error while transporting to QUALITY server

hii all,
I have a DC which have been built and deployed fine and giving the perfect output when running on portal. This has been deployed on local server.But while tranporting it to QUALITY server for testing,itz cannot be imported there and giving an error "DC Broken".....!
plz do help out....

Hi
What i believe that the related objects for the BADI are not captured in the Transport.
Pls check the BADi definitions and implementation class included in the Transport.
Hope this helps if so reward.
Thanks
Shyam

Field selection issue in dev & quality server for PO

Dear All,
I have an issue regarding PO field setting in development and quality server.
Requirement was that PO can not be created without PR (means PR is mandatory) for a particular document type ZDOM.
So i have created new field selection filed by copying NBF field selection and assigned with document type ZDOM.
So when i am testing this scenario in DEV server it is working fine but after transporting to Quality server, it is not working in q system.
Again i reimpoted the same request but still it is not working. So what could be the reason?
Pls refer the attached screen short.

I don't know how your development is working..
I have done the same settings in my development client. But I can still create PO without reference PR.
Then I have tried parameter EFB. Then its working perfect..
Use buyers authorization in OMET..
Check the settings..
Here untick the option W/o Reference..
Then assign the profile to user id in SU3.
Then try to create PO without PR.. You will receive a authorization error...
But the problem is its user level not at client level..
Test and revert back..

Problem with sap script while transporting from dev to quality server

Hi experts,
In dev server i am getting correct output in sap script.But when it is transporting to quality server alignment is different.Printer name is same both in dev and quality.Please give an answer for this query.
Thanks
suresh

Hi Suresh,
This could be a problem with the Sapscript buffers. Try running the report RSTXDELL on the system to clear the Sapscript buffers?
To do this you can use RSTXDELL report with default settings except it is better to have * instead of the current client number in the Client field.
After this, create a new spool and see if the problem is resolved?
Regards,
Aidan

Transport to Productiion Server

Hi Experts.
I have created a flow service in Business Connector and need to transport it to Production server, I have no idea related to transport of business connector services.
can anyone please tell me how to transport it to PRD and what are the steps i have to follow.
Regards
Nik

Hi Anil,
The transports pertaining to pricing procedure are client dependent ones whereas the ones related to condition table are client independent(Table creation)
So first check the objects of the transport which is now in Quality server in the previous server itself. Mostly it will not have any Atables (Atables are the condition tables).
First pls check whether the transport mechanism for client dependent and client independent tports are same or different.
If same, and if the objects are there in the transport in the first server, then check its log while transporting to quality server.
If different, please follow the procedure for client independent tports and move the condition tables .
I think access seq is again client dependent. So take care of condition tables and access sequences in different transports to take care of the scenario.
In our project the tport mechanisms are different for client dependent and client independent tports and hence we follow separate procedure for condition table and access seq(in 2 different transports)
Pls assign reward points if it helps. Let me know if you need further info.

Custom OM infotype issue in Quality Server

Hi,
I created a custom infotype in PPCJ. Its working fine in development server.
We transport the request to Quality server and created a record in PO13 t-code for the custom infotype.
There i am getting a success message that 'Record is created'. If i check in tables HRP9009 and HRT9009
can't able to see the datas which are created.
Its working fine in development server, but not in Quality. Have anybody faced this type of issue?
Please provide some solution on this.

Hi Santosh,
Thanks for your reply....
I have done cache refresh and also crosschecked all the objects comparing with DE system but i am wondering how i am getting file payload in jdbc channel and jdbc payload in file channel after transporting from DEV to QAS.
Thanks in advance...
Naveen.

Error while transporting the badi from dev to quality server

Dear Freinds
         Iam getting the error " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
        i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
The errors affect the following components:
    BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
    EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Problem in transporting details of wage elements of pe51 to quality server.

Hi Experts.
Here i have added some new wage elements in the windows of pe51 in Development sever.
They have added properly in the Development server.
But when im trying to transport the same to quality server,no details are going to the quality server.
Please provide the way of doing the save function.
Thanks alot.
Regards,V Sai.

Hi Experts...
Thanks for the reply.
Now it s been transported to Quality.
But some values are not adding to the particular window.
In Earings side Statstical net sub to adjumnets amount is not adding to earnings side.
In Deductions-genral window it is not showing the GPF Amount in total coloumn.
In deductions-taxes window it is not adding professional tax amount in total coloumn.
But take home pay is showing up correctly only.
Where should we modify to get the correct payslip.
Please advice.
Sai.

Problem in quality server after transport

HI,
Yesterday i have transferred a function group from development to quality. It's transorted successfully .All the function module under this group are active. but the status function group shows 'Inactive' because in main program the include is not active. when i go for a syntax check it is correct. while activating it it says <b> "the object is in the worklist of D_tal"</b>
N.B. It was earlier transported to quality . it was working fine in quality. later somebody has deleted some function module from quality and also some unicode check issue was there in quality . so we corrected it in development and created a new Transport request for that function group and transported it.
Why that error "the object is in the worklist of D_tal" is coming.
thanks&regards
sandeep

Hi,
When you transport request into Quality, there will be an option to overwrite existing (Force into system) objects in that system. Ask you BASIS to do the same.
Caution: Transport request objects belongs to that Function group only. It should not impact any other object.
Regards,
Govind.

Issue : In retransporting Smartforms in Quality server

Dear All,
In retransporting Smartforms in Quality server ,Smartforms is
not executing from outside, but if i m going in display mode and
executing from inside then i m able to execute it.But its getting executed when i transport the smartform with different name.
While debugging in Function Module SSF_FUNCTION_MODULE_NAME ,
L_FP_UDAT is getting updated from table d010sinf and L_SF_UDAT is
getting updated from table stxfadm.
L_SF_UDAT should less than L_FP_UDAT or if it is equal then L_FP_UTIME
should greater than L_SF_UTIME as per debugging.
then it is calling FB_GENERATE_FORM and in that it is checking for
Smart Form name and it is going for message.
if i_formname = space.
message e206 raising no_name.
endif.
During generating message it is going on infinite loop.
Regards
Vinay

Thanks for the response.
I have declared a variable of type TDSFNAME. and passing my smartform name in this variable. and in Function Module SSF_FUNCTION_MODULE_NAME, I am passing this variable. but again same problem is coming , and not able to generate SmartForm .
Thanks & Regards,
Vinay sharma
09223255156

Re-transport the transport request in Quality server after System refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

How to assign automatically system id in Quality Server (portal - transport

In the development environment we have ECC and CRM/EP server and in Quality we have only one server ECC/EP. Portal is working fine in development server(CRM). I have imported transport package from Development Server to Quality server successfully using transport package (Import/Export). But in QAS. only links are displayed. When I click getting exception error. Then I changed system name of QAS for few static pages.
In case of iviews in the QAS, Systen name parameter has the Development server system ID(e.g. ECC_DEV_100, CRM_DEV_100.) Is it possible to assign QAS system name (ECC_QAS_300) to iviews in Quality Server. For few static pages I have manually assigned QAS system ID ECC_QAS_300 in Iviews. but still getting exception server.

Hello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien.

Transport DI JOBS to Quality Server

Hi Everyone,
I have created one project with 2 Job, 2 DS, 2 ABAP Data flow. I have used SAP Development system as source and MSSQL as Target.
Can any one tell me how can i transport this project to Quality Server in Source and MSSQL as target?
Thanks in advance.
Regards,
Rishit

confiration will be saved under one transaport request nymber.
if you want to move this configuration to Quality
SELECT THE TRANSACTION CODE SE09
SELECT ONLY MODIFIABLE .
ALL Transport request will appear.
then select transport request number &click on the "Release directly button"(which is in Lorry shape).
then ask your BASIS PERSON TO MOVE TO QULITY SERVER(you give the transport request number to your Basis person.
chandra
chandra

Want to transport Zsapscript in local objects to quality server ?

Hi all,
I want to transport Zsapscript which is stored in my local objects to quality server ? can you tel people
tel me how to do it ?
thanks,
Siva.

Hi Siva,
Local objects can't be tranportable.
you have to assign a tranport request to the local object.
steps to assing the tranport request to local object
1) go to SE80
2)Search with the Local objects from the drop down in the Repository Broweser
3) selct your script and right click on that, then go to Other funtions--> Change package assginment
4) here you can create or assign the tranport request.
Regards!

Issue on transport to quality server

Similar Messages

Maybe you are looking for