Issue output - error

Hi All,
For a particular invoice output type which is used for external send we are getting the error message XS826
How to resolve the same ?
Message no. XS826 - Cannot process message, no route from  to.
Thanks & Regards,
Yats.

Did you read the long text of the message?  Is the issue within SAPConnect or in your communication software?  What is the routing (from/to)?  This is usually a config issue with SAPConnect or Exchange.

Similar Messages

  • Error in issue output

    i created my own page format in spad , size 400 mm and 700 mm.
    that page format assigned to my smart form . when ever iam trying print . issue output could not issued giving error .

    Hi,
    Please paste your eror discription as well. What is that error message.
    Regrads,
    Lokesh

  • Unexpected issue of error message (output 00 001)

    Dear Guru's
    Please help me to come out from this issue , iam getting this massage in VL10b t-code
    Unexpected issue of error message (output 00 001) massage VR555
    Thanks
    Caprin

    Hi Srinath,
    I noticed that you helped with the problem reported above.
    I'm having the same problem and can not find what could be wrong.
    When I try to create a delivery from the transaction VL10B, gives the following message:
    Unexpected issue of error message (output 8B 213)
    Message no. VR555
    Could you help me?
    Tks
    Lucas

  • Error when "Issue output To" is done in VA23 transaction

    Hi All,
    I'm getting a error when "Issue output To" is done in va23 transaction, the message reads as follows "Element CONF_OUT window MAIN is not defined
    form ZVQUOTATION_3YR".
    But when i check the script the text element CONF_OUT is present in the main window
    Can u please tell me what is the reason for this.
    Thanks & Regards
    Santhosh

    Check in the driver program .when you calling the Write_form for this text element is the name proper ,check out the sapscript is activated .
    Please reward if useful.

  • ERROR when I issue output

    the error log:
    At the time of output determination, the archiving parameters for RD00 (App V3) were incorrectly maintained in Customizing
    but where can I change it, I can not find in IMG!!!!!

    thanks, if I select "Print only", issue output is correct, but how to config if I select "print and archiving"?
    second, if I run VF03, in initial screen of VF03, I can issue output, but if I enter a Billing document number and enter detail screen, the "issue output to" is inactive, WHY??????????
    Menu struct:
    Billing Document
        1
        1
        1
    Issue Output To |>
    Edited by: jianming zhang on Nov 4, 2008 3:27 AM
    Edited by: jianming zhang on Nov 4, 2008 3:29 AM

  • External Hard Drive Input/Output error

    I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
    The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
    The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
    Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
    I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
    I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
    Thanks,
    Paul Rugg

    Thanks for the suggestion.
    Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
    Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
    text below posted to other question relating to external hard drive problem.
    I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
    Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
    The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
    The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
    and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
    I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
    Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • "input/output error' when making disc image from DVD

    I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
    While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
    This means I'm unable to copy the disc and then successfully install my Logic Studio.
    Any ideas?

    Thanks for your answer.
    Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
    But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

  • Hard Drive "Input Output" Error When Attempting to Format

    A friend just gave me a nice PowerBook that seems to be in need of a fresh OS and when attempting to format the hard drive I am getting an "Input Output" error.  Any suggestions to overcome this issue and format the drive?

    Hi all,
    I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
    It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
    http://www.apple.com/support/macbook/hd/repairextension/
    Doh! Too late?
    So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
    Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
    https://discussions.apple.com/message/16090313#16090313
    I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
    https://discussions.apple.com/message/16081818#16081818
    So, what can the problem be?!?!?!?!?
    In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
    https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
    Can anyone confirm this?

  • Help -- backup data with disk utility, input/output error.

    My problem started when my MacBook Pro computer (with OsX) froze.  When I restarted, the startup screen stayed on for a long time.  Now, the startup screen stays on for a few seconds and then shuts off.  I do NOT have a recent backup of my data.  I have tried the following:
    Went onto the recovery partition, used Disk Utility.  When I verified the disk, it said it needed repair.  When I tried to repair the disk, it said it could not be repaired.
    I then tried to copy a disk image of the hard drive onto my external hard drive, but it says there is an "input/output error" and won't allow it.  How else can I backup files on my computer at this point?

    Had issue partitioning 2TB my passport drive, got input/output error while using disk utility.
    Here is what I did to get my external disk back
    In Disk Utility
    1) Try to use erase option first, it failed
    2) Try to partition the disk, failed as well.
    3) Then try erase option again, then ...   it worked !!

  • Disk Utility "Input - Output error" when attempting to erase Hard Drive

    Hope that someone can point me in the right direction.
    I bought an external hard drive for Windows a year back and loaded music onto it. I realized that I my MAC wasn't getting "Read / Write" privileges for the External Hard Drive, so I decided to try to Partition it and make it into a FAT readable device. It erased all data from my hard drive, but Disk Utility stopped the process and displayed an "input - output error".
    Consequently, I can't initialize the external hard drive to make it usable on my MAC.
    Can anyone point me in the right direction so I can "reformat" my external?
    Thanks!

    Hi all,
    I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
    It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
    http://www.apple.com/support/macbook/hd/repairextension/
    Doh! Too late?
    So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
    Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
    https://discussions.apple.com/message/16090313#16090313
    I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
    https://discussions.apple.com/message/16081818#16081818
    So, what can the problem be?!?!?!?!?
    In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
    https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
    Can anyone confirm this?

  • WD External Hard Drive will not format, "Input/Output Error"

    Trying to reformat an old Western Digital external drive, immediate error in Disk Utility "Input/Output Error". Switched USB cords/ports, nothing. Just getting a second opinion before I trash it.
    I know I can probably take out the drive and put it in an external case, but this was just going to be an extra drive for a friend, not worth the $20 for the case.
    Thanks

    I'm getting the same errors from both my USB ports when I try to format a brand new Maxtor 1TB drive.
    I had noticed some strange errors a week ago when Time Machine was reporting an error saying it had failed (this was using a nother external firewire drive). Errors were (not verbatim) "error writing files" & "unknown error".
    I naturally thought there was a prob with the ext drive, so knowing that I had at least a good full back-up on there, bought a new ext drive (larger) to perform a full backup on so I could reformat the firewire drive and utilise it elsewhere - but got errors when I tried to set it up as a Time Machine drive seconds after I took it out of the box.
    I ran "Verify Disk" on my internal macbook HD and it reported some permission errors and mis-reported file sizes and told me to "Repair Disk". I did, and this stated it fixed a few things. Ran Verify again and it still reported some permission errors.
    Now, this leaves me in a sticky spot. I can't format the maxtor external disk in order to manually copy over my disk content, it doesn't even show up in disk Utility or in Finder. I can't perform a Time Machine backup - as it can't see the maxtor disk. I can't do a TM backup on the old Firewire disk - due to the program errors. AND it appears I have permission errors on my internal HD.
    Whatever course of action I take to correct these problems - I would like the knowledge that I have a full backup to restore from if things "head south" while I look to correct the HD permission issues.
    Anyone out there with some REAL SMART ideas that can help me out here ?
    Right now I'll even accept "Half Smart", "Clever" and "**** - Why Didn't I Think Of That" answers !
    S.

  • Input/Output Error USB 2.0 External Hard Drive

    I recently started having problems with an external hard drive setup that I did not have prior to trying to setup the drive to be compatible with Time Machine.
    The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
    The first problem I ran into since reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
    Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
    I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
    I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
    Thanks,
    Paul Rugg

    I have similar problems with my USB external HD. Reformatting or repartitioning will not solve your problem. I've tried that 2 times already. The problem will reappear. My HD was running great until last month, when it suddenly without warning disappears from disk utility and the mac altogether. It not only dismounts itself, but also ejects itself, while still physically connected and the power is still on. The HD has its own power supply of course and is directly connected to one of the iMac USB ports. I have erased, repartitioned, disk verified, rebuild spotlight indexes, cleared PRAM and NVRAM, but nothing has solved the problem.
    It is application independent, and not related to like iTunes as another post had suggested. Nothing to do with Mac applications. It seems to be USB related.
    Messages in the Console seem to indicate something wrong with 'USB transactions passed their expiration point' and 'USB cannot enumerate something', but these statements are a bit cryptic to me. Perhaps an Apple system engineer can someday shed some light here.
    thanks much for any assistance.

  • Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

    Hi guys,
    So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
    I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
    The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
    While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
    (Internal error)" but none have (Input/output error)
    The screen grab is below.
    I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
    I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
    "The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
    Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
    I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
    If anyone can help, THANKS!
    2012 MacBook Pro, Mac OS X (10.9.3)

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Purchase order output error....

    Hi,
    Purchase order is created from a shopping cart.But PO output(via email) is not created.I am getting output error.Error log is showing message as "Incorrectly processed".
    Error message description is "SUM OF PERCENTAGE EXCEEDS..." and "TABLE TEM_DEL_TO does not fit into window".
    Please suggest.
    Thanks in advance.

    Po is not deleted.Goods receipt is also done against that PO.Account asignment details are not changed.
    For error "TEM_DEL_TO does not fit into window" below is further info attached in description.
    You tried to display table TEM_DEL_TO in a window. However, the table either is too wide for the window or a horizontal shift by the specified value is impossible because the table would then no longer fit into the window. The same error occurs if a template is too high for the current subwindow. This is usually noticed in the check when the form is activated, but in some cases (with device types such as ASCIIPRI) the table measurements have to be adapted and this does not occur until runtime. With device type ASCIIPRI, for example, only integral multiples of 1/6 inches (vertical) or 1/10 inches (horizontal) can be used for positioning. The height of a line within a template therefore changes, for example, from 3mm to 4.2mm, causing the total height of the template to increase and exceed the height of the window.
    System response
    The system issues an error message.
    Procedure
    Correct the positioning of table TEM_DEL_TO or make the window bigger.

Maybe you are looking for