Issue playing more than 2 tracks in a row.

I have an issue with my ipod classic. If I select to play an album or playlist it will only play 2 songs then will show any other songs as 0.00 and skip past them. But if I press the menu button then enter the a song it would not play it does actually play. As you can tell this is very annoying as I have to get my ipod out of my pocket after 2 songs to get it to play again. How can i stop this from happening?

Please do a Hard Reset as below
Charge your Ipod for at least 2 hours
Toggle the Hold switch, make sure you dont see the Red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Have a nice day!

Similar Messages

ITunes will no longer play more than one song in a row

I upgraded my iTunes and it seemed to be working fine. But all of a sudden I cannot get my libraray or any playlist ti play more than one song at a time automatically. It just stops after each song. Any ideas?
Thanks
Windows XP

But all of a sudden I cannot get my libraray or any playlist ti play more than one song at a time automatically. It just stops after each song.
head into your itunes main library window. are all the little boxes to the left of your tracks unchecked?
is so, hold down Ctrl and click on one of those boxes to recheck all the songs. (this may take a little time.)
do you get continuous play once all the songs are rechecked?

How to RECORD more than ONE TRACK at a time ? ? ?

I have looked, read and tried - but cannot enable more than one track at a time... How do you do it?
I am using a Lexicon Omega USB interface. With two mics plugged in to it, I am able to assign MIC 1 to a track, and MIC 2 onto a different track. However, cannot get BOTH tracks to go "live" at the same time.
Thanx: Stacey

"basic track" is a short cut. whenever i explain something to someone recording an audio instrument i always tell them to create s New Basic Track. it's simple, to the point, has no effects on it (and you can add those later, anyway, the BEST way to do it)
however, either would not cause the issues you're dealing with at the moment, both are valid. Basic just skips a step.

Play more than one song at a time

The apple tv won't play more than one song on my playlist. And why can't there be playlists under "Music" and well as "Computer"?

WLFehrs wrote:
This has been a condition since day one. The "working" icon just keeps going and it doesn't move on to the next song. I've tried using the random play option as well to no avail.
Is this when trying to stream content from iTunes using the Computers icons and Music submenu? I assume the same happens when you try to play from the internet using the main Music icon too? Is it only on Shuffle or when playing an album?
What about movie rentals from itunes Store - will they play ok?
WLFehrs wrote:
Connectivity isn't a problem, my home network has the latest tech and the Apple TV is within 15 feet anyway.
While that seems logical don't entirely discount it - issues like this are incredibly frustrating to pin down to which component on the network is causing the problem - your old AppleTV worked (with Windows 8?) so this makes the newer model the more likely culprit I would agree.
Whenever there are issues like this, if you have not done so:
1 - Unpower AppleTV, router and restart along with the computer.
2 - If connecting via wifi and it is feasible to test with ethernet do so to exclude wifi as the problem somewhere in the chain.
3 - If streaming from iTunes check the computer is not going to sleep - power saving with hard drives spinning down could potentially cause a 'timeout' issue for access and worth temporarily disabling to test.
4 - Temporarily disable any security software (firewall/port blocking) on the computer or check if it is detecting AppleTV repeated connections as an unknown intrusion threat.
5 - Reset AppleTV and set it up again from the Settings menu.
6 - Restore AppleTV using iTunes and a microUSB to USB connection:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
7 - Assuming under warranty, take it to an Apple store and see if you can get a replacement. It may be faulty.
As I said these issues can be very tricky to pin down and it can be a process of elimination.
I had issues last year with connection problems - I thought it was an itunes update as there were threads elsewhere about multiple connections being established. One day I restarted my router and the problem was fixed. A few years ago my AppleTV1s were hanging after extended use - it was the Netgear router overheating ( aknown fault with that particular model).
AC

OSS doesn't play more than 1 sound at the same time [SOLVED]

Hello,
I use OSS to replace ALSA, it used to work properly here. Today I noticed that I can't play more than one sound at the same time, something which I used to be able to do.
Also, ossxmix doesn't operate properly (I can't control the volume of a specific program).
Looks like a permissions issue, because /dev/dsp and /dev/oss are created as root and other users get Permission Denied.
Any ideas how to fix it? My sound card is an AC'97 onboard.
Thanks!
EDIT: Solved by pacman -R oss, rm -rf /usr/lib/oss then pacman -S oss. Seems to have worked.
Last edited by Renan Birck (2009-01-02 23:06:35)

Hello Angela,
Have you tried resetting the iPod yet to see if that makes a difference? To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
If that doesn't work, a restore of the iPod via iTunes may be in order.
B-rock

Hello. Just got Garageband'11 for my ipad 2. Can´t seem to be able to play more than two notes at once on touch keyboard. Help!

Hello. Just got Garageband'11 for my ipad 2. Can´t seem to be able to play more than two notes at once on touch keyboard. Help!

Thank you for your response.
I am trying to sync them both to the same computer (Windows), and with the 2nd ipod, it looks like everything is going to work out fine, until I go to add songs from my itunes music library...then, after a few seconds of me hoping it will work, I get a message that says "Attempting to copy to Lisa's disk failed. The disk could not be read from or written to."
I thought it might have been my ipod. But then I tried to download songs from my sister's computer, and even my work computer (just to see if it would work), and it did. So I'm not sure what is going on here. Is it my computer, or is it the ipod? Or is it itunes?
Also, my sister in-law said her issue is similar, in that her itunes doesn't recognize her ipod now that my brother's ipod has been used on their computer. She gets the same message as I do...thus she is unable to download any songs onto her ipod.
If you have any helpful tips, it would be greatly appreciated.
Thank you for your time and assistance.
-- Lisa Soto

Issue selecting more than one photo

Anyone else having an issue selecting more than one photo at a time in the iPhoto Library. I want to send a whole batch of birthday photos to my sister and I'm forced to send one photo at a time.
Holding neither the shift or Command key while I click a photo does nthing. This is a new issue. I didn't used to have this problem
iPhoto 4.0.3

Quit iPhoto. Try moving the "com.apple.iPhoto.plist" file from your user's "Library >Preferences" folder to the trash. Try iPhoto again.

Projector that plays more than one movie

How can I make one projector play more than one movie? If the movies are protected, can the projector still play them? How can I link them? Thanks for your help.

Hi Norman,
I’ll elaborate on Sean’s reply.
As Sean mentioned you can use:
_movie.go("markerName", "MovieName")
To jump to the marker named ‘Markername’ in a movie called ‘MovieName’.
I tend to still use the verbose syntax
go to "markerName" of movie "MovieName"
If you had:
go to movie "MovieName"
you’d jump to the start of the movie (frame 1)
you could use:
go to movie "MovieName.dir"
but the '.dir' is not needed and if you create a protected DXR or DCR, the statement (without the movie extension) would work.
Now, if you want to avoid writing a unique behavior for every link you’re creating, I’ve got a tutorial that describes how to do it at:
http://www.deansdirectortutorials.com/Lingo/paramDialog.htm
The above uses property variables and a parameter dialog box. It does require some understanding of programming (not too much though).
If you have D11.5, in the Library Palette, in the ‘Controls’, category, there is a ‘Jump to Movie Button’ behavior. This behavior can be dragged and dropped onto a sprite and then you can type in the marker name and movie name in a parameter dialog box to set the link for the sprite. I say D11.5 because while earlier versions of Director have this behavior, there is a small error (easily fixed) that makes the marker jumping part non-functional. Anyway, my behavior in my tut site does the same thing.
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au

How do you enable more than one track at a time?

Couldn't find it in the help portion of the program. I am beginning to believe I have an incomplete help document. Anyway, I want to record more than one track at a time, for example vocals and guitar, while being able to monitor them. Thanks. btw why is this forum so slow? It like totally runs fine till I sign in to my user account. Then it's as slow as a cyber snail.

Okay, I will try that. I have one last question pertaining to this. Will this work if I am using a condenser mic on phantom power through a midi device while plugging the guitar through the same midi-device? I will try a few things either way but I thought I might ask before hand.

HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs. Says it can find it and then leasds me to locate it. I don't know where to look. Help!!!

I just updated iTunes to the latest version and now I can't play more than half of my songs. When I click on a song it comes back and states that it can't find it and prompts me to try and locate it. I don't know where to look. Help!!!!

Hi ldhong,
There are a few ideas in this article on how and where to look for missing iTunes media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Hope this helps!
- Ari

Can takes from more than one track be comped at the same time?

Greetings,
I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542&#9527542), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
Any suggestions?
Thank you.

You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.

Disc creator Audio CD with no more than 13 tracks

Hi, I tried twice and had the same problem, I couldn't burn an audio CD with more than 13 tracks, although I chose 19 songs, the final CD had only 13 songs

Do you use your Vaio Update for updates, kingdom? If so, check in there to see if you're also up to date on your video card drivers and BIOS. (Your downloads page at Sony UK shows some updates for those there, so we'd better check on them too.)

Network OK but not a single APP on ATV can play more than 1 second

My ATV 3rd gen (full HD) is at latest update, network is OK (I see movie trailers and all) but ALL applications (Netflix, Vimeo, InternetRadio, PodCasts, etc) cannot play more than a fraction of a second then it takes me back to that APP main screen. I tried rebooting, but to no avail. Since I am at latest software version I don't know what to do but bring it to full factory reset (and then reprogram everything, network, Netflix, HomeShare....). Any suggestions???

Thanks for the quick response, but I assure you the network is not the problem. I can see the posters of the new films (not the trailers, wrong wording). This means that I get info from Internet. But ANY and ALL application cannot play for more than a fraction of a second. As an example, I start a Netflix movie, it starts to play for about 0.5 seconds and then goes back to Netflix previous screen. Same thing happens for ALL application (InternetRadio plays one or two notes then goes back to InternetRadio channels screen). Same thing for Vimeo, Podcast, etc. I'd like to solve it without a full factory reset..... :-(
Thx again.

Music wont play more than a few seconds on some songs

Some of my songs wont play more than a few seconds and some only 30 seconds when i play in WMP they play fine
Purchased at amazon.com
i have tried deleting and re adding file plays in windows media player fully

problem solved Re downloaded fresh files

Issue playing more than 2 tracks in a row.

Similar Messages

Maybe you are looking for