Issue printing with Adobe CC after upgrading to Mavericks

After installing OS X Mavericks, when I try printing via Adobe Indesign CC or Adobe Acrobat Pro it seems to shrink the page I am printing.  When I print via Preview if I export as a PDF it prints just fine.  I've checked for Adobe updates, driver updates, etc.  Any help would be appreciated!

Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

Similar Messages

  • Issue with multi-monitor after upgrading to Mavericks

    I ran Mountain Lion OS on my MacBook Pro along with VMWare Fusion 5 with an extra monitor and everything was working fine till I upgraded to Mavericks. Since then, I am not able to see the 2nd monitor in the Extended Mode.
    on Apple, everything is work and I see two monitors and can move one window from one display to another but when I open my Windows in Fusion, only one display is accessible (the 2nd display showing Apple screen, which wasn't the case before). Even I can see that the color settings I had done before for my additional monitor is not in place after upgrade.
    I have checked my WIndows and settings are fine as it was before. It's Windows 7 Pro. I read some articles that I have to upgrade to Fusion 6 and some others that mentioned this is an issue with Mavericks and upgrade won't fix it. So, I am looking for some advice or similar experince, if any.
    Thx in advance for your help.
    Behzad

    Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

  • Printer no longer works after upgrading to Maverick

    I have an Epson TX810FW, multifunction printer/scanner.  It wwas working fine until I updated to Mavericks.  I now get a message that the scanner function is not supported and I cannot get the printer to work.  I need both working, and I have loaded all the latest updates from Epson up to 2.15.1.
    Can someone provide an answer that will restore the mrinter to fully operational?  Otherwise, how can I reomve Mavericks, as the loss of functionality is more of a downside than any enhancements that Mavericks might claim.

    Hi,
    I've been experiencing a similar issue with my old, yet working until Mavericks update, OKIPage 14ex. No problem at all with both Lion and Mountain Lion but after Mavericks update the printer cannot print any longer. The printer is connected via a regular USB port, the system recognizes it, I can send a print to its queue but as soon as the print is enqueued the printer goes into hold status and nothing can be done to resume the print.
    Since the printer model is quiet old, no driver is avaliable from OKI support, however I'm wondering what Apple did with this update thus being able to produce such a mess.
    Of course I tested the printer conncted to another PC and it perfectly works!
    I would really appreciate some advice in order to restore the previous situation.
    Many thanks.
    Marco

  • Trouble with Canon 2020Adv after upgrade to Maverick

    Hi
    We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac.  I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver.  Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
    Any suggestions??
    Thanks

    Two possible causes for the issue you are having.
    1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

  • Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!

    Since updateing to the OS 10.9 Mavericks, I am no longer able to print to my Canon IPF610 Large Format Printer. I tried upgrading the driver at the Canon website for the OS 10.9 but it's still not working.

    I already know about this and this solved my problem 2 years ago when I hooked up the printer for the first time. Now after installing the Mavericks update, it keeps saying the printer isn't connected. I tried using a different ethernet cable, unplugging and plugging printer back in and still the same problem. I can still print to it from my old Apple G5 tower using 10.5.8 and was even able to print with no problems on my Intel iMac using the 10.8.  I installed the updated driver for 10.9 on Canon's website and still get the same problem.

  • Is anyone having trouble scrolling with your mouse after upgrading to Mavericks

    After I upgraded to Mavericks my mouse seems to just time out and not work. I can point and click and that works fine but the scrolling is terrible. Just stops working.

    Mavericks issue.  See more like this at right.

  • Canon 495 printer scanner not working after upgrade to maverick

    I am sorry I upgraded to Maverick.. My Canon printer/scanner does not work.  I upgraded the drivers, etc. I get an error message and the icons drop out as soon as they come up to auto scan or photo.

    What is the error message?
    Try resetting the printing system.
    Reset Printing System

  • Mail app constantly synching with iCloud server after upgrade to Mavericks

    Since upgrading to Mavericks, Mail has been constantly synching with the iCloud server - and I mean constantly. I know this because I have the Activity window open. Consequently there is often a significant lag between clicking Send on a new message and it being sent, or new messages being downloaded. I have another iMac at my office and the same problem is being experienced there.
    I left the computer running all night to see if it would eventually sych everything, but it seems to be going in a constant cycle ever since the upgrade.
    If it means anything to anyone, the Console window displays a continuous stream of data similar to this:
    9:24:37.448 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
    9:24:37.449 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
    9:24:39.808 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
    9:24:39.809 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
    Can anyone offer any advice on what the problem might be and how I might fix it.
    Thanks,
    Kevin

    No solution here, but I have either the same or a similar problem. Apple Mail with Gmail (IMAP) used to work fine with Mavericks.
    Now with Yosemite most emails load ok, but some show the spinning wheel and "Loading..." message forever. These messages never load.
    I also have Thunderbird and it loads and shows these messages just fine. The messages that don't load in Mail are simple plain text messages so it's unrelated to complex attachments and such.
    Clearly something is broken in Yosemite that wasn't broken in Mavericks.

  • Issues printing with Adobe Reader

    I am having difficulty printing a billing statement with Reader 10.1.12. Page 1 cuts off several transactions at the bottom of the page, but the other pages are fine. I have tried scale to fit page and also manually inserting percentages to shrink the page, but it's not working. 

    Hi Maryw83,
    If you are trying to print another document are still facing the issue. This might be a document related issue.
    Regards,
    Ajlan Huda.

  • Shared HP 6L printer no longer works after upgrade to Mavericks

    Prior to upgrade was able to share old HP Laserjet 6L with another Mac....believe driver was Gutenprint 5.3xx....  Have not been able to find new driver to make printer work...Any sugestions on how to resolve issue...short of buying a new printer...althought it is probably time.  Thanks

    I tried several times to delete and add printer.Gutentenprint not an option to select defaults to Generic Postscrit Printer.
    When I deleted and re-added my HP (which is connected by ethernet), where the default "Use: Generic Postscript" showed up, "Select Software" is an option in the pull-down menu. That gives all the Gutenprint choices.

  • Unable to print with Canon iR2018 after updating OsX Mavericks

    Hi,
    there's anybody who can help me in finding canon ir2018 drivers for osX Mavericks?

    Here is a link to the Canon UFR2 v10.2.0 driver that supports your iR2018 on OS X 10.9.
    Please note that when adding the network printer you must use the LPD protocol and select the correct printer model, which will be listed as "Canon iR2018". Do not select the iR2018 that shows UFR II in the model name as this will be for the older v2.43 driver which is not compatible with OS X 10.9.

  • Airplay no longer working with 3rd party after upgrading to Maverick.

    I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
    Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

    I woke up this morning with the same problem (all was fine last night).  Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me).  All appears okay so far today (except some of my accessories in the menu bar are gone). 
    I sure hope an update comes SOON.  In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

  • Brother DCP7055 after upgrading to Mavericks

    I can't print with Brother DCP7055 after upgrading to Mavericks. No problem via USB. No way via network. Could you help me pls?
    I can install new printer and so on, but the printer goes immediately on pause and it doesn't print anything...
    thanks for your cooperation
    Giuseppe

    This thread and its suggestion to turn on printer sharing may help.
    https://discussions.apple.com/message/23799343?ac_cid=tw123456#23799343

  • Has anyone had problems with burner after upgrade to Mavericks on an iMac 27"

    Has anyone had a problem with the burner after upgrade to Mavericks.  It is hunting not always reading picture files keeps showing a fault when trying to burn a DVD. 

    I am having the same experience.  I just update this morning and now can't get mail.  Did you ever figure this out?

  • Printer will not work after update to Mavericks

    I have a macbook pro and an HP7280 printer connected wirelessly.  After upgrading to Mavericks the printer will not work.  The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading)  When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed.  So I deleted the printer and reset the system and then added the printer back on - same thing.   Any ideas??

    It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
    With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Maybe you are looking for

  • Site id flag in tool bar. How do I get this?

    How do I get the the add on that identifies where a site or domain is located. It shows a country flag in the toolbar? Thanks

  • My computer doesn't detect my Vision M 30

    It started with my player working however the screen was scrambled. I couldn't read anything. So I did the clean-up, format and reset the firmware but now my Vision M turns on and says there is a firmware problem and it says to reload the firmware. T

  • Collecting Datasources in Transport request in R/3

    Hi Experts,                         Can anyone give information of how to collect Datasources in Transport request in R/3 Development system.I want to move datasource from Development to Quality system in R/3 side

  • Buttons not sizing down.

    weird problem i am having. i have a motion menu and am making buttons overtop of the .mov. everything works great except that when i draw the button and then add the text, dsp is adding space above the text that i can't get rid of. it's making it so

  • Eclipse vs. (WebCenter) Portlet Tag Library Descriptor

    Hi there, one more question: What's the best way to teach Eclipse WTP about the portlet tag library (http://java.sun.com/portlet_2_0) mandated by JSR 286 and bundled with WebCenter itself? So far, it complains that it 'Can not find the tag library de