Issue projecting image in MacBook Pro

I have recently upgraded my MacBook Pro to Yosemite. I am now not able to project my active windows. Only my wall paper is being projected, not the windows I'm in (Firefox, Word etc.)

The WEP key is the password for the box. So, it probably was saying it could see the signal but until you entered the WEP key (password) it would not let you on.
If it does not let you login each time automatically, two things:
1) when you are logging in, check the box for remember password in keychain
2) If this isn't the case, check your Keychain password.
1) Go into "/Applications/Utilities/Keychain Access".
2) Go to category->passwords->applications
3) Find the name of your router. If there is an entry there, delete it.
4) Log back into your router and now it should ask for a password.
Hope that helps.

Similar Messages

ExpressCard (PCIe) hot-swapping issue only happened in MacBook Pro 6.1

ExpressCard (PCIe devices) with hot-swapping issue only happened in MacBook Pro 6.1. But there is no this issue at all in MacBook Pro 3.1 and MacBook Pro 5.2.
I had tried ExpressCard to SATA2 Adapter (Silicon Image 3132 ASIC), ExpressCard to 1394 Adapter (TI XIO 2200 ASIC), ExpressCard to USB3.0 Adapter (NEC D720200 ASIC) and ExpressCard to SDXC/UHS-I Adapter (JMicron JMB389 ASIC). I had got Kernel Panic (Sytem Crashed) for ExpressCard to SATA2 Adapter, Other three devices can not be detected when we process hot-plug / hot-removal these ExpressCard (PCIe devices).
We expect Apple can solve ExpressCard (PCIe) issue by updating EFI / OS Software. Awaiting for your kind reply~ Thanks in advance!

http://discussions.apple.com/thread.jspa?threadID=2665060&start=0&tstart=0

The disk image "Name Macbook Pro.sparsebundle" is in use Try ejecting the disk image

I upgraded my Mountain Lion two weeks ago and I've experienced number of issues since then.
Now I have problem with the Time Machine.
When I try to create backup I'm keep getting following message:
"The disk image "MyName Macbook Pro.sparsebundle" is in use
Try ejecting the disk image"
The problem is that Time Machine seem to be ejected, I checked this both in Finder and Disk Utility.
Please could you possibly help me with the issue?
I work on 2010 Macbook Pro

Try the following:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in to the back of the Time Capsule
Wait a few minutes, then try another backup

How do I move an imovie project on a macbook pro to an imac

I have an imovie project on a macbook pro. I can't seem to export the movie. I keep getting processing error -108. I want to shift my project from my Macbook pro to my Imac. How do I do this and import into imovie?

Hi
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
BTW:
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

Hello, I need to download Microsoft visio and project on my Macbook pro, can I do that? which site has them?, Hello, I need to download Microsoft visio and project on my Macbook pro, can I do that? which site has them?

Hello, I need to download Microsoft visio and project on my Macbook pro, can I do that? which site has them?, Hello, I need to download Microsoft visio and project on my Macbook pro, can I do that?

Viso only runs under Windows, so you'd first have to install Windows, either using Boot Camp or a virtual machine, then purchase Viso. Or, you can purchase this to deal with Viso files:
http://www.omnigroup.com/products/omnigraffle/feature_comparison/

Bootcamp windows 8.0 pro installation issue with early 2015 Macbook Pro

I am having this issue with installing Windows 8.0 pro (and 8.1 pro) on my early 2015 MacBook pro vs. Bootcamp. I have tried different method for multiple times and all failed. Any help is appreciated.
Hardware: (1) early 2015 MacBook Pro with 128GB (13 inches) , (2) Sony USB DVD burner. (3) Two 16 gb flash drive 2.0 version from two different manufactures
Software: (1) 8.0 Pro ISO on flash drive from Microsoft (I have two copies) (2) 8.1 Pro downloaded from Microsoft website.
Note - I was able to download the bootcamp supporting files successfully and copy to a USB flash drive.
Method 1 - Create the installation disk from ISO on flash drive and also tried copying ISO on hard drive (desktop)- failed.
I have a 16 GB flash drive (2.0V) connected
ISO is a valid 8.0 pro copy from Microsoft came on a flash drive.
I have the windows 8.0 pro ISO on a flash drive and plugged in.
Issue - It gets to around 50% of "Copying Windows files..." and then doesn't go any further. 8 hours later, still stuck at around 50%. I also tried to do the copy ISO from desktop. failed as well.
Method 2 - I repeat the above steps with Windows 8.1 ISO downloaded Microsoft website - failed. Stuck at 50% copying windows file for 9 hours.
Method 3 - I burned the Windows 8.0 pro ISO to a DVD and try to do the installation through a DVD instead. DVD was successfully created.
I was able to perform the partition. When the computer reboots, it starts the window installation. However, it got stuck at 7% forever. I tried this multiple times and failed.
Method 4 - I download a 8.1 Pro ISO from Microsoft website, I burned it to a DVD. Repeat method 3, Again, windows installation stuck at 7%.
Method 5 - I called Apple. - What they told me is pretty much repeat the above steps. Still failed.

The ISO file(s) being downloaded seem to be corrupted. Can you use Microsoft FCIV tool - https://support.microsoft.com/en-us/kb/841290?wa=wsignin1.0 ?
The DVDs should be burnt at the recommended rate for the physical media. DU should be used for burning the DVDs.
Reference Disk Utility 12.x: Burn a disk image to a CD or DVD and Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support.

Display issues on mid 2009 Macbook Pro

I have had a recent intermittent display issue on my Macbook pro. It started a few months ago and is not a constant issue. External displays are fine so it seems to point to a connection between grahpics card and the 13" screen.
You can see an image of the problem here:
Does anyone have experience of similar issues?

i've done a complete rebuild back to 10.6.8 and found that both problems appear to have disappeared, both screen and TV working again since this morning without seeing any issues.
I'm now installing Lion to see if it returns.
the only difference will be that I'm not going to install bootcamp until later, this will be a clean install as before I installed Lion on a previous version of 10.6.8 with bootcamp etc already installed.
maybe this will work, wish me luck

Best way to "transfer" Aperture images from MacBook Pro to iMac?

I recently purchased a MacBook Pro 15" to import and edit images (within Aperture and CS6 as an external editor) when I'm out in the field shooting.
I prefer to have all my images in one location and thus desire to copy eveything to my home base iMac when I return home.
What is the best way to "transfer" those images so that my homebase iMac Aperture Library can recognize the new masters and edited versions? Complicating this is the desire to "stamp" each image with a metadata preset upon import that I can do either at the laptop import or upon transfer to the iMac.
I know just enough to be dangerous but clearly there is an optimal way to consolidate and manage images when using two computers.
Welcome any thoughts from fellow photographers!
Chris

Thanks Kirby. I utilize Aperture 3 by reference instead of a compiled library. So I have individual folder/projects stored on my laptop. By exporting as a library, does Aperture bring these folders and related images "with it"?
What I don't want to lose is any post processing I do in the field which creates separate versions and/or .PSD files.
Thanks for your continued assistance.
Chris

Internet issues on my new Macbook Pro.

I'm hoping someone might be able to shed some light on an issue I have been having! I've just got a new Macbook Pro, so late 2011 model and ever since having it I have had issues with the internet. Forgive me if I'm not able to explain very well what is going on, but ill give it my best shot.
So I'm Wi-Fi to connect, which is on a 10mb connection, and using Safari on the Mac. When I first open Safari, the apple home page loads straight away no issue. I tend to be able to use the net for about 10 minutes without any issue. Then, for no reason whatsoever, Ill click on a link or type a web address, and it will take FOREVER to load, sometimes it won't load at all. I'm not talking anything heavy with pics or video, just a standard webpage, it could be anything. The other issue I have, is for example like today, I was on the guardian website, and I opened a few links in some new tabs, probably about 8 in total and the same thing always happens. Some load instantly, some take forever, so fail to open at all. If I turn the Wifi off on the Mac, and literally straight back on again, and refresh any page, it will load instantly (about 80% of the time this works). then after a few minutes same thing happens. Then after a while, it will go back to normal again and so forth and so forth! It's becoming quite frustrating. The wifi connection isnt lost, its still connected according tot he symbol at the top, it just isnt working.
The best way I can describe it, is its like the router is getting 'clogged up' and struggles to get any info to my Mac. then after a while, it de-clogs itself and were good to go for a few minutes again.
I've never had this problem, with my main pc which is connected wirelessly, or even my little netbook I was using as a laptop before this. I was able to open as many links and tabs as I wanted with no issue, and never had hang times like this whilst waiting for anything to open! There doesnt appear to be an issue with my connection, as every pc, phone and even ps3 can connect without a single issue. The PS3 will happily stream HD netflix without any issue over wifi
I'm not sure what is going on! When my Mac is downloading big files, it never seems to have any problems and the d/l speed stays pretty consistent. I've run speediest at various points during various days, and I'm getting a pretty steady 10mb.
Anyone that can shed any light would be a lifesaver!! I'm hoping there isn't an issue with the Mac however this is getting to the point of unbearable, and im close to returning the **** thing!
Thanks in advance!

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Time Machine error: The backup disk image "/Volumes/----/----MacBook Pro.sparsebundle" is already in use and resource unavailable?

I have a MacBook Pro 13" 2010 model running Mountain Lion. I have always been able to use Time Machine with my Time Capsule. Just today I have been receiving the same error message whenever I would back up my computer:
I removed my name before "MacBook Pro". It takes a long time "Looking for backup disk..." first. The disk I put with the time capsule is called Huge Backup, and in Huge Backup there is my sparsebundle file called "----- MacBook Pro." When I open Finder, open my time capsule, and then open my sparse folder, it should mount a drive where I can see my computer's backups. That doesn't work. Then I get this message:
I once again removed my name before "MacBook Pro" but I can open my sister's sparsebundle who is running Mountain Lion on the same network and her backups work fine. I have researched this topic and have tried to repair the disk in Disk Utility, remount all the drives, remove the drive and restart the backups, and even restart my computer and the Time Capsule. Nothing worked. It just was working yesterday, but now I get this in the settings along with a caution symbol in my menubar:
Is there anything I could do to fix this? Reconnecting it in AirPort Utility (5 or 6) didn't work. Also, for some reason, the error renamed Huge Backup to Huge Backup-1 as you can see above and below in the messages. I downloaded the Time Machine Buddy widget and this is the error report I got. I replaced my names or private info with [-----]. By the way, the network is called NDR Network, and the Time Capsule is alled NDR Time Capsule. Here's the error I keep getting:
Starting manual backup
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Disk image already attached: /Volumes/Huge Backup/[-----]'s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a483e6c0 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a343d430 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Mounted network destination at mount point: /Volumes/Huge Backup-1 using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a34410c0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
Failed to eject Time Machine disk image: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle
Please help!

I didn't remove all of my names, so just ignore that...

Used safe start to try and fix issues with safari on MacBook Pro but it shuts down right after it stops. What can I do.

Safari kept shutting down and someone suggested trying a safe start to correct issue. All this did was create a new oils sue as my MacBook Pro OS X 10.9.1 system only begins the safe start within lay a small portion of the bar filling and then shuts down. Now I cannot even get back to my regular screen.

artbyval,
what is an “oils sue”?
Have you tried booting into your recovery partition? To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilites menu, from which Disk Utility can be selected. In Disk Utility, select the disk that your MacBook Pro boots from (typically named “Macintosh HD”). Once the disk is selected, press the “Verify Disk” button; if it shows problems, press the “Repair Disk” button. Once the verification/repair is complete, restart normally, to see if you can login as normal. Once you can log in again, see if Safari still has the same problem with shutting down.

Can a pdf file be projected from my macbook pro

Is it possible to project a PDF file onto a screen from my Macbook Pro?

If you have a MacBookPro with retina display, you can use an HDMI connector to connect your laptop to an HDTV.
They are available on apple retail webpage found here:
http://store.apple.com/us/product/MC838LL/B/apple-hdmi-to-hdmi-cable-18-m?fnode= 51

Display Issues on Early 2011 Macbook Pro

I am currently experiencing an undocumented problem for my 15 inch Macbook Pro (Early 2011 Version), and was hoping to get some help diagnosing what the issue might be.
Lately, it seems that whenever I am doing anything that is computationally expensive (i.e. streaming video using Flash or Silverlight, or using parallel processing in MATLAB), my screen goes haywire and shows up noisy green lines on anything that is supposed to black. Similarly I get noisy light blue lines on anything that is supposed to be white. I am including a pictures below to illustrate the issue.
I have tried several fixes, but nothing has worked to day. Changing the color profile does not change anything. Taking a screenshot does not change anything. Also, the issue seems to pop up regardless of whether or not I have the onboard graphics card enabled. I am also fairly certain that this is a hardware issue, since I reinstalled Lion and updated all of my software after it first started happening.
I would appreciate any input in regards to further diagnosing the problem. I have an appointment coming up at the local Mac store, but I'm almost dreading going in since I do not want to have to send the computer in for repair.

i've done a complete rebuild back to 10.6.8 and found that both problems appear to have disappeared, both screen and TV working again since this morning without seeing any issues.
I'm now installing Lion to see if it returns.
the only difference will be that I'm not going to install bootcamp until later, this will be a clean install as before I installed Lion on a previous version of 10.6.8 with bootcamp etc already installed.
maybe this will work, wish me luck

Time Machine Restore vs Restoring disk image to Macbook Pro

Hi guys,
Is it best to restore my new Macbook pro Retina from a 2011 Macbook pro via a time machine backup or is it best and easyer to restore my Disk Image from my old Macbook Pro 'Macintosh HD' to my new SSD in a 2013 Macbook pro Reitna via Disk utility??

If you have a new Mac and an old Mac, then it's probably best just to use Migration Assistant to transfer your data, settings and apps from the old Mac to the new one.
If you have fitted a new, blank SSD to the new Mac, then that will need an OS, obviously, before you run Migration Assistant. However, you can transfer an image of the old computer to the new one -- I cloned my 2009 MacBook's drive straight onto the SSD I put into my 2012 MBP.
Usually, any OS will work on any Mac (that it supports), but that's less true of brand new machines, particularly with new hardware technologies like Retina.
I would install the OS from the Recovery Firmware, and then migrate the data using MA.

Issue projecting image in MacBook Pro

Similar Messages

Maybe you are looking for