Issue refresh Deski migrated documents-- Getlov failed

Hi,
We are migrated any desktop documents to 6.1 version to 3.1 XI using migration wizard holding in a new server, when we are going to refresh the documents we have the next issue, GETLOV FAILED .... DA0004.
The remote BBDD are oracle 9i, and we haven´t got configured the host.
We are migrated the documents, the universes the connections and the users, but i don´t know if i need configure the host at server.
Please help me....
Best regards

Hi ,
1) Importe the Universe and clear all LOV files.
2) Purge caches in all data provider
3) Rename the all prompts in reports
4) Refreshe the report again.
5) Export the universe to CMC with new LOV files.
6)Export reort into Infoview.
I think this will help you for reslove GetLOV failed error
Thanks

Similar Messages

SBS2003 Migration Document -- Answer file issue

Hello all,
I have been working on a SBS2003 to SBS2011 migration. I am following the migration document v12.05.04 and I am stuck on Page 17. I have created the answer file as documented, but SBS2011
will not recognize it. After doing some searching, it appears that SBS2011 only accepts a file called "sbsanswerfile.xml", but the documentation describes a "cfg.ini" file.
And ideas what is up with this? Documentation error? Should I just create a similar file in the xml format?
Thanks. -Cheers, Peter.

Hi Peter,
Please confirm whether you refer to the migration guide “Migrating
Windows SBS 2003 to Windows SBS 2011 Essentials”.
If you use this document as reference. Please make sure that you will migrate SBS 2003 to SBS 2011 Essentials
(not SBS 2011 Standard). Meanwhile, please check if you have missed any step.
If this issue still persists, when
SBS2011 Essentials didn’t recognize the answer file, please let me know the complete error message that you can get.
Hope this helps.
Best regards,
Justin Gu

Migration Signature Validation Failed

Hi, I am getting an invalid migration signature error when trying to install AIR Launchpad beta 3.0.1.
The machine is running XP SP3, with all patches applied. I have tried switching off antivirus for both download and installation, but with no success.
This is a 'clean' machine, with disk formatted, and OS and all other software re-installed less than a week ago. System time and date are correct.
AIR was installed automatically as part of Flashbuilder 4.5 installation and the update to + 4.5.1 immediately applied.
I have search the net for solutions to this, but found relatively few others with this exact issue. I did find many reports of issues with 'Package' validation errors, whhic are often attributed to certificate failures due to system date/time which I have already checked.
Hope that sombody has an answer.
The log file is attached below.
Many Thanks
Cjdsys
[2011-08-28:11:09:51] Application Installer begin with version 2.5.1.17730 on Windows XP x86
[2011-08-28:11:09:51] Commandline is: "C:\Documents and Settings\Ciaran\My Documents\Downloads\airlaunchpad_p8_3-0-1_081911.air"
[2011-08-28:11:09:51] Installed runtime (2.5.1.17730) located at C:\Program Files\Common Files\Adobe AIR
[2011-08-28:11:09:52] Unpackaging file:///C:/Documents%20and%20Settings/Ciaran/My%20Documents/Downloads/airlaunchpad_p8_3-0 -1_081911.air to C:\Documents and Settings\Ciaran\Local Settings\Temp\fla16C.tmp
[2011-08-28:11:09:55] Migration signature validation failed
[2011-08-28:11:09:55] Got an unexpected fatal error while unpackaging: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="invalid migration signature" errorID=5023]
[2011-08-28:11:10:01] Application Installer end with exit code 7

Hmmm.
Looked at the system requirements for Launchpad 3.0.1.. Flashbuilder 4.5.1 or 4.5 sdk with AIR 2.6 overlay.. Log showed I was running 2.5.xxxx.
Launched Flashbuilder and searched for updates.. Tells me all versions of Flash Player and AIR are up to date. Decide to try installing another AIR app, so go for Tour De Flex as I want to study the mobile stuff anyway. Installs fine, and on launch, I am immediately offered an AIR update to 2.7.x. Accept the update and low and behold, AIR Launchpad now installs.
Sweet, but wtf?
So, for anyone out there who comes falls foul of this in the future, do not rely on Flashbuilder to confirm your version of AIR is up to date, launch an AIR app instead and you will get the true picture.
Hope this helps some other confused soul.
Cjdsys

Reg: Migration Documents

Folks,
Below is requirement ,
ENV: 11i and 9i in windows
Need to migration to Solaris ?
pls share the related document to achieve this .
Thanks

APPSDUDE wrote:
Folks,
Below is requirement ,
ENV: 11i and 9i in windows
Need to migration to Solaris ?
pls share the related document to achieve this .
ThanksPlease refer to these docs.
Migrating to Linux with Oracle Applications Release 11i [ID 238276.1]
Debugging Platform Migration Issues in Oracle Applications 11i [ID 567703.1]
9i Export/Import Process for Oracle Applications Release 11i [ID 230627.1]
Below are some docs you might need to refer to if you encounter such issues during the migration.
Command 'perl adclonectx.pl migrate' errors with RC-5004 when migrating from Windows to UNIX using Note 238276.1 [ID 337513.1
Adrelink Fails When Applying Manifest Patch From Oracle During Cross-Platform (Solaris to AIX) After Following Note 238276.1 [ID 1286098.1]
ORA-29855 Error Creating APPLSYS FND_LOBS_CTX During Database Import [ID 415117.
Relink Failed For 'Wicmex' , 'Wicdol', 'Wicdcl', 'Wicmlx', ‘Encacn’, ERRORS : g++34: /lx1/lx1_ap/lx1appl/sht/11.5.0/lib/ilog/5.1/libschedule.a: No such file or directory g++34: /lx1/lx1_ap/lx1appl/s . [ID 1215225.1]
Error Migrating Platform adpatch fails with : DCPW null for "APPLSYS" [0] [ID 756706.1]
adconfig.sh gets jre was not found in /usr/lib/java/jre/bin/i686/green_threads/jre [ID 371405.1]
Migrating from Windows to Linux Fails During Relinking: Error: Wrong format in file $APPL_TOP/admin/adlinkbk.txt [ID 400853.1]
RAPIDWIZ FAILING WITH RW-50010 AT ADRUNIAS.SH: LINE 200: [: 2.4: INTEGER EXPRESSION EXPECTED [ID 1076893.1]
After Migrating Receive "ORA-12705: Cannot Access NLS Data Files" Error [ID 732816.1]
Relinking WICMLX failed: /sht/11.5.0/lib/rwave/libstd8s.a: No such file or directory [ID 371424.1]
Thanks,
Hussein

Error Refreshing DeskI using Infoview

Hi all,
I'm getting the below error when trying to refresh DeskI report using infoview
"Your request could not be completed because a failure occured while the report was being processed. Please contact your system administrator.[RCIRAS0546]"
I cannot find any reference to this error code even on google!!!!!!
The strange thing about this error that is appears with some reports with a specific users
I'm using BOXIR3 on AIX on ORACLE 9i

Hi Mahmaud,
Just wanted to ask a few quick questions:
1. Is the issue replicable with all the reports you have? have you tried using the report based on sample universes.
2. Are these new reports or migrtated ones.
3. Since when have you started to face this issue?
4. You can go for increasing the Tomcat Heap size.

Crystal report refresh based on document ID

Hi All,
i am able to do webi report refresf based on document id but i am not able to find crystal report refresh based on document ID BO SDK API on JAVA.
please help me on this?
the below code is for webi report refresh :
ReportEngines engines = (ReportEngines) Esession.getService("ReportEngines");
ReportEngine widocRepEngine = (ReportEngine) engines.getService(ReportEngines.ReportEngineType.WI_REPORT_ENGINE);
widocRepEngine.setLocale("en_US");
DocumentInstance doc = widocRepEngine.openDocument(documentId);
doc.refresh();

Well, first, the ReportEngine code you are using is only for Webi and Deski. You may want to start by looking at the RAS and Enterprise sections of the this [wiki|http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsSDKSampleApplications]

Migration documents

Hi,
We are currently using Java Caps 6.2 and planning to migrate to Oracle Fusion. Would request to provide some useful links for migration documents from Java Caps to Oracle Fusion.
Regards,
Vidya

There is a bug already filed for tracking these issues for this whitepaper and we are working for it.

I have an issue with some PDF documents some MS Office documents, notably MS Word when received in eMail as attachments not displaying on iPhones, iPad 2s

Hi,
I have an issue with some PDF documents & some MS Office documents, notably MS Word when received in eMail as attachments not displaying properly on iPhones, iPad 2s & new iPads?
PDF docs - areas of the doc only show as grey splotches regardles of viewer
MS Word Docs -
inserted graphics don't display at all,
tables & lists especially with borders are broken &
tables & lists missing the borders &
tables & lists missing the 1st 1-2 lines of the lists/tables.
This is replicated on iPhone 4s, iPhone 4Ss, iPad 2s, iPad new (x2)
It certainly happens in iOS 5.1.1 & iOS 5.1
We believe it all worked aok in iOS 5.0.1(?) & prior
There is no problems reading/seeing these PDF & Word docs on anything other than iDevices.
This is rather critical for us & if not quickly fixed/rectified will prevent us from further purchases of these devices
Rolling back to iOS 5.0.1 or prior I believe isn't possible because of the BaseBand update(?) & isn't much of an option because of the quite noticeable Battery/Charging/WiFi improvements in 5.1 & 5.1.1

Hi,
I logged a call with AppleCare & have since had explained why this occurs (some time ago)
I'll try to explain what was indicated to me.
iOS has a limited Font Set & this affects what PDFs can display. You need to use iOS supported fonts in your PDFs to see/read them properly
These supported fonts are indicated here => http://support.apple.com/kb/HT4980
Regards MS office docs, iOS doesn't have much of an API to work with MS Office documents at all so is stuck with 3rd Party Apps to try to do it.
Unfortunately Mail in/on iOS uses the API to attempt to open/use MS Office attachments unless you tell it to use an App to open the attachment.
I have had success opening & reading MS office docs now with CloudOn, but find it slow & very awkward to use.
Not too sure if this helps others, but at least it explains why this is occurring

Document control failed due to error in [DOCMGR-CANCEL] with a return code

i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
I am doing the calcel like this
Nav: buyer work centre --> order
searche the po and then
select order --> cancel then click GO button
i gave the Reason as Cancel
communication method: email
Cancel Requisition: Yes
Please help on this, its urgent.
Thanks,
Vijay.

Hi Vijay,
Check this MOS note.
Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
Thanks
-Arif.

Forms Migration Document 6i to 10g?

I have searched OTN and Metalink and cannot find a migration document. I'm installing Forms/Reports 9.0.4 on a new server and moving all my 6i forms/reports. Is there a migration document telling me what changes need to be made in forms/reports for 9.0.4?
Thanks.
Shirley

For Forms, you can check the Forms Upgrade Center on OTN at http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html.

Date issue in processing billing documents that shipped in a prior period

Date issue in processing billing documents that shipped in a prior period that is now closed:
SAP values those deliveries with the current document date in A/R when it should be the original delivery date. Baseline date needs to stay the delivery date, but is getting copied from the billing date in the new period. A user exit exists (& needs to be applied) to manipulate the baseline date when the accounting document is being created.
Any input is appreciated.

Hi
Try with Invoice Correction Request concept
Sale document Type: RK
Reference Document Type : Billing Number
for Understanding the Invoice Correction request check below link
[Creating Invoice Correction Requests|http://help.sap.com/saphelp_46c/helpdata/en/dd/55feeb545a11d1a7020000e829fd11/content.htm]
Regards,
Prasanna

Document control failed due to error in [DOCMGR-CANCEL], return code = [OTH

Hi,
When i tried using the cancel PO API, it resulted in the following error.
Document control failed due to error in [DOCMGR-CANCEL], return code = [OTHER]
I searched the metalink and found out that it was a bug as p_doc_num variable was a number and in PO_HEADERS_ALL segment1 is VARCHAR2. But now the bug is fixed.
I tried both ways, with and without quotes but it is still giving this error. Please suggest.
I used the API in the following way.
DECLARE
l_return_status VARCHAR2(1);
BEGIN
fnd_global.apps_initialize(4480,20707,201);
--call the Cancel API
PO_Document_Control_PUB.control_document (
p_api_version=>1.0, -- p_api_version
p_init_msg_list=>FND_API.G_TRUE, -- p_init_msg_list
p_commit=>FND_API.G_TRUE, -- p_commit
x_return_status=>l_return_status,-- x_return_status
p_doc_type=>'PO', -- p_doc_type
p_doc_subtype=>'STANDARD', -- p_doc_subtype
p_doc_id=>34, -- p_doc_id
p_doc_num=>null, -- p_doc_num
p_release_id=>null, -- p_release_id
p_release_num=>null, -- p_release_num
p_doc_line_id=>null, -- p_doc_line_id
p_doc_line_num=>null, -- p_doc_line_num
p_doc_line_loc_id=>null, -- p_doc_line_loc_id
p_doc_shipment_num=>null, -- p_doc_shipment_num
p_action=>'CANCEL', -- p_action
p_action_date=>SYSDATE, -- p_action_date
p_cancel_reason=>null, -- p_cancel_reason
p_cancel_reqs_flag=>'N', -- p_cancel_reqs_flag
p_print_flag=>null, -- p_print_flag
p_note_to_vendor=>null ); -- p_note_to_vendor
commit;
-- Get any messages returned by the Cancel API
FOR i IN 1..FND_MSG_PUB.count_msg
LOOP
DBMS_OUTPUT.put_line(FND_MSG_PUB.Get(p_msg_index => i,
p_encoded => 'F'));
END LOOP;
END;
/

first you have to assign org_id to the program,like fnd_client_info.set_org_context('167');
you also have to initialize,like this
fnd_global.initialize(session_id => l_session_id
,user_id => 2613
,resp_id => 50459
,resp_appl_id => 201
,security_group_id => 0
,site_id => -1
,login_id => 1102144
, --can't be -1,or else will be wrong
conc_login_id => 1102144
,prog_appl_id => -1
,conc_program_id => -1
,conc_request_id => -1
,conc_priority_request => NULL);

Failed to open XML document. Failed to retrieve Public ID

I have a client posting to Weblogic 6.1 server with the help of Apache
SOAP 2.2. The posting works fine if the contents of the SOAP message
is small. But when the contents of SOAP reached more than 11KB, the
following error occurs:
Error: Failed to open XML document. Failed to retrieve PUBLIC id or
SYSTEM id from the document. Decrease the number of char between the
beginning of the document and its root element.
The SOAP document looks like:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<mn:sMethodName xmlns:mn="sMethodURI">
<batch appid="1">
<employee>
<name>...</name>
<address>...</address>
</employee>
<employee>
<name>...</name>
<address>...</address>
</employee>
</batch>
</mn:sMethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Max Post Size in Weblogic is set to (-1).
The program is able to handle less than 50 items of
<employee>.....</employee>. The error occurs when more than 50 items
are used. The problem is that our application should be able to handle
more than 1000 items of <employee>....</employee>.
My questions are:
1. How should I configure weblogic to solve the problem?
2. How should I configure the deployment of Apache SOAP to solve the
problem?
Pls advise. Thanks.

One can deduce from the error message that the parser is looking for the
<?XML...?> portion of the document because that is where the SYSTEM and
PUBLIC ids are found in the document.
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Grace" <[email protected]> wrote in message
news:[email protected]...
>
Sorry, but I didn't get what you mean. I thought that was handled by theApache
SOAP API already? And if it couldn't see the XML document header, then whydoes
this only happens when the document size is large? It doesn't haveproblems whenever
the document size is small.
"Cameron Purdy" <[email protected]> wrote:
It's looking for the XML document header "<?XML" ....
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Grace" <[email protected]> wrote in message
news:[email protected]...
I have a client posting to Weblogic 6.1 server with the help of Apache
SOAP 2.2. The posting works fine if the contents of the SOAP message
is small. But when the contents of SOAP reached more than 11KB, the
following error occurs:
Error: Failed to open XML document. Failed to retrieve PUBLIC id or
SYSTEM id from the document. Decrease the number of char between the
beginning of the document and its root element.
The SOAP document looks like:
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<mn:sMethodName xmlns:mn="sMethodURI">
<batch appid="1">
<employee>
<name>...</name>
<address>...</address>
</employee>
<employee>
<name>...</name>
<address>...</address>
</employee>
</batch>
</mn:sMethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Max Post Size in Weblogic is set to (-1).
The program is able to handle less than 50 items of
<employee>.....</employee>. The error occurs when more than 50 items
are used. The problem is that our application should be able to handle
more than 1000 items of <employee>....</employee>.
My questions are:
1. How should I configure weblogic to solve the problem?
2. How should I configure the deployment of Apache SOAP to solve the
problem?
Pls advise. Thanks.

Error from EAS - "refreshing security from Shared Services failed"

Hi,
I was using Native only security in HSS for Essbase 11.1.1.3 and EAS allowed me to Refresh security from Shared Services. (Essbase security was already externalized to HSS.)
However, after I added "MS Active Directory", and provisioned a MSAD user to a native Planning group, EAS errors out with "refreshing security from Shared Services failed" .
I checked Essbase security and that MSAD user is not added to Essbase.
From Essbase Log I see:
Essbase failed to get roles list for [ESB:Analytic Servers:servername:1] from Shared Services Server with Error [32:1062:Failed to connect to the user directory [ HSS'sMSADname].
I then tried to remove MSAD from our H Shared Services and see if this problem goes away. However, MSAD still shows on the left panel menu in H Shared Services. How can I get rid of MSAD?
Any suggestions?
Edited by: user643332 on May 12, 2010 12:05 AM

Hi,
Are you sure you have removed it from shared services, you may have just disabled it.
You must restart the shared services application server to apply any changes made.
Cheers
John
http://john-goodwin.blogspot.com/

What is a migrated document report.CVS?

establish_communication_SmartKey.htm,C:\temp\HP_WebRelease\setup\help\fr,C:\temp \HP_WebRelease\setup\help\fr....I found this in "a Migrated Document Report. CVS. Ant idea what it is and can I get rid of it?

Any movie openable in QuickTime.
(72142)

Issue refresh Deski migrated documents-- Getlov failed

Similar Messages

Maybe you are looking for