Issue regarding a warning msg while transporting a request
Hi all,
While transportiing a request we got a message which says
'Insert into view : Key NOTPC of table T7INZ3 is not part of view V_T7INZ3'
what this mean.
We are running one application in development server its giving the correct result but when we are trying to run the same application in Quality server we are not getting geting the correctr results.
Can anyone help in resolving this. message which we got during transporting by any chance related to this?
Hi,
we have reimported the request and transported it again but still we are getting the same message.
I have checked the table and view in both the servers and they do exist.
Similar Messages
-
Warning MSG : while Transporting a Request to Production
<b>Hi Friends,
I got folowing errors while transporting a Request to Production -</b>
<b>PART 1 .</b>
+++++++++++++++++++++++++++++++++++++++++++++++++
NBA Quality Assurance
Selection for Import 03.05.2006 11:56:02 (0) Successfully Completed
Import ABAP Dictionary Objects 04.05.2006 08:56:08 (0) Successfully Completed
ABAP Dictionary Activation 04.05.2006 08:56:14 (4) <b>Ended with Warning</b>
Import 04.05.2006 08:56:34 (0) Successfully Completed
Check Versions 04.05.2006 08:56:47 (0) Successfully Completed
Import steps not specific to transport request
NBP Nobel Production System
Selection for Import 04.05.2006 08:56:35 (0) Successfully Completed
Import ABAP Dictionary Objects 27.06.2006 13:55:12 (0) Successfully Completed
ABAP Dictionary Activation 27.06.2006 13:55:15 (4) <b>Ended with Warning</b>
Import 27.06.2006 13:55:36 (0) Successfully Completed
Check Versions 27.06.2006 13:55:51 (0) Successfully Completed
Import steps not specific to transport request
++++++++++++++++++++++++++++++++++++++++++++++++++++++
<b>PART 2</b> - <b>LOG</b>
ABAP Dictionary: Activation
Transport request___: NBDK923224
System______________: NBA
tp path : tp
Version and Release: 340.16.09 640
Program start============================================================
Mass activation
=========================================================================
Process..................: nb13_21
User.....................: DDIC
Date, time...............: 04.05.2006, 08:56:13
Platform.................: CUSTOMER-NBA(620)/DB6/AIX/nb13
Tool.....................: BATCH/RADMASG0
Log......................: F, /usr/sap/trans/tmp/NBDA923224.NBA
Program parameters:
Input medium...............: Transp. request NBDK923224
Activation method..........: Inactv.
Chk. mode..................: T
Version to be activated....: M
Versions to Be Deleted.....: Delete only active versions
Lock against paral. exec...: Shared
Independent statistics log.: being written
Parallel mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
No object to be deleted and activated exists
=========================================================================
Mass activation
=========================================================================
Process..................: nb13_21
Return code..............: 4
Program runtime..........: < 1 sec.
Date, time...............: 04.05.2006, 08:56:13
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20060504085614
Ended with return code: ===> 4 <===
=========================================================================
Mass activation
=========================================================================
Process..................: nb13_21
Return code..............: 4
Program runtime..........: < 1 sec.
Date, time...............: 04.05.2006, 08:56:13
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20060504085614
Ended with return code: ===> 4 <===
<b>Can any one tell me why this ? what is the impact of it ??</b>hi,
you must extend the log complete, than you'll see the
object, which caused the error.
RC = is only warning:
All the objects were transported successfully.
Peculiarities occurred for certain objects. These might
not have been intentional.
Example: A warning is given during a transport if the request contains an object deletion. ...
A.
Message was edited by: Andreas Mann -
Error generated while transporting a request using TMS
Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solutionare you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM -
Warning Msg - While checking Mulitproviders
Hi Frds,
When i am trying the check the mulitproviders, we are getting warning msg. Below is the warning msg which we getting.
Error messages from point of view of OLAP processor:
Message no. R7I127
Now we have upgrade our patch level from 16 to 21.
Kindly can anyone give me some solution to overcome these warning msg.
Thanks
YuviHas the MultiProvider ever been activated in the past? If you activate it, and it hasn't been activated previously, you'll get this message from time-to-time (another one of those "undocumented features"). After actiavting it, go back into the MultiProvider in edit mode and run a check on it. It shouldn't throw that warning anymore.
-
Error while transporting a request
Hi,
I am transporting a request having infoobjects into a quality server.
while transporting its giving error as "Changes cannot be made,display user only".
but when i checked into Quality server changes has already been made and corresponding related objets like update rules are inactive....
so can i consider this request as successful transport??
and if transport is successful then why it is giving such kind of error,....because previously when i have transprted it never gave such error.
Thanks in advance.Hi,
Transport is not sucessful to Quality system. you donot have sufficient authorization for transporting objects or system is locked for any changes.
contact BASIS person. and because of this infoobjects (infoobjects used inupdate rules, infoprovider...all are in deactive status).
check all objects in developement system and create new request and check request before transporting.
Regards
Daya Sagar -
Regarding return code 8 while importing trnsport request
hello friends,
i have encountered a problem while importing a transport request.
in log display the message is like this
ended with return code 8.
there is a syntax error in line no 5 of saplz_xxx_xxx program.
include program lz_xx_xx not found.
actually it is a function group, there is an include program at line no. 5.
how to solve this problem.
will it throw any error if the fg is stored in $tmp.
the function group concerned is stored in a customized package.
i hope to get a perfect answer.
thank you.
regards,
karteek.kattaKarteek,
Your include program at line 5 is missing in the target system and hence the error.
Just check the package of that include program and if it is not $tmp, check that this program is locked in which request ?
Transport that request to your target system and thereafter re-import your original transport and it will be success.
BR
Diwakar -
Error while transporting the request from quality to production of BI
Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
Execution of programs after import (XPRA)
Transport request : RBDK904992
System : RBP
tp path : tp
Version and release: 372.04.04 700
Post-import methods for change/transport request: RBDK904992
Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request RBDK904992 completed
Start of subsequent processing ... 20080406140407
End of subsequent processing... 20080406140408
Execute reports for change/transport request: RBDK904992
Reports for change/transport request RBDK904992 have been executed
Start of................ 20080406140408
End of.................. 20080406140408
Execution of programs after import (XPRA)
End date and time : 20080406140408
Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.MHi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia -
Re: Error occurred while transporting a request from dev to quality in BW
Hi BW Guru's,
I have done minor enhancement on one Master Data Data Source. The transports went fine in R/3 side. But in BW system it is giving an error message
There is no DataSource with these attributes
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
The errors affect the following components:
So this is the error message can any one help me how to move further analysis on this issue.
Thanks in Advance,
VenkatHi Venkat,
The problem is during Replicate if the datasource in the target system or during trasport of the InfoSource related.
In this second situation try to transport the Transfer Roules of the InfoSource with all related under/bottom objects, the system will include the Replicate of the DataSource.
Check also if the mapping of the sender and receiver system is correct: Tools --> Mapping of the sorce system...
Ciao.
Riccardo. -
Error in index while transporting the request
hi
error : R3TRTABLBSIS REPAIRING TABLE IN THIS SYSTEM(PROD)
plz giv me some idea to avoid this.
reply me asap.
regards
satyaHi,
Gotto SE14
Give Table : BSIS
Activate and Adjust dataBase.
Some body Might have changed the structure of table.
Check whether the table has any Includes.? or Else Transport them again.and Try SE14
Regards
Bala.M -
Return code : 12 while transporting change request
Hi,
When i tryin to import a change request i am gettin a return code:12....i tried re-configuring STMS on my stand alone PC still no hope.
Can u plz help me wt actions can b performed.
Thanks and Regards,
MaltiHello Malti,
Return code 12 usually means the transport tool problem. You can start with updating the TP and R3trans with the latest patch on the SAP Service Market.
Regards,
Joe -
Hi Experts,
I am facing short dump when trying to send a request to add an attribute in Master Data Infoobject from DEV to QA.
Although the attribute is getting added to main Master data Info object but main master Info object is in Revised Version.
I have been searching the solution in SCN from couple of days and tried every single solution but none of them works for us.
When I check in se09 I am getting the following message
Program terminated (job: RDDEXECL, no.: 09445401)
Execution of programs after import (XPRA)
End date and time : 20150420094559
Ended with return code: ===> 12 <===
When checking in ST22 IN QA I am getting the following message
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
When I checked in ST22 in QA I am getting following dump
31 RAISE EXCEPTION TYPE cx_rs_program_error
32 EXPORTING
33 text = 'Invalid DSO subtype'. "#EC NOTEXT
34 ENDCASE.
35
36 * get table name from DDIC
37 CALL METHOD cl_rsd_odso=>get_tablnm
38 EXPORTING
39 i_odsobject = n_infoprov
40 i_tabt = l_tab
41 IMPORTING
42 e_tablnm = l_tablnm
43 EXCEPTIONS
44 OTHERS = 1.
45
46 IF sy-subrc <> 0.
47 RAISE EXCEPTION TYPE cx_rs_program_error
48 EXPORTING
49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
50 ENDIF.
51
52 CALL FUNCTION 'DDIF_NAMETAB_GET'
53 EXPORTING
54 tabname = l_tablnm
55 TABLES
56 dfies_tab = l_t_comp
57 EXCEPTIONS
58 not_found = 1
59 OTHERS = 2.
60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
62 EXPORTING
63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
64 ENDIF.
I have attached the short dump
Thanks In Advance
RashidHi Tom
Thanks for your reply.
I am not sure what do you mean by Manually activated in Dev or QA . If you mean Dev then i did and also maintain the infoobject related tables using transaction SE14 but still same error.
But if you mean in QA then QA is lock for manual activation but i tried though program RSDG_IOBJ_ACTIVATE but again failed. I also maintain the infoobject related tables using transaction SE14 but still same error.
Regards
Rashid -
Issues regarding Transporting the Custom codes and Text Elements
I created a custom t-code and had some text elements for my ABAP program in DEV, I transported quality an it worked , but when i transport it production it did not transport the custom code and the text elements. Can u guys give me steps to take for the custom code and the text to be transported sucessfully??
Hi,
Please check whether the Tcode and Text elements are assigned to the particular Transport Request number. If it is an enhancement that Tcode and Text elements might be there in QA before itself and so this is working. You need to add the TCode manually while transporting the request and transport it to QA and PRD.
Thanks and Regards
Sowmmya VB -
Error occurred while transporting request no. from development to productio
Hi Experts,
I have created a zreport (having a request number ) and activate the zreport ..
While transporting this request from development to production I face the error zreport is inactive .But when I check zreport in development server it is active ..
So how to transport this request.? Please help ..Hello,
Can you ask the basis person to check the transport log and tell as to what error has occured. Most of the time transport fails if one of the dependent object fails to move. For example you have structure that you have used for table declaration in your prog. You moved the program but the structure was not moved. When Tranported , the program will result in an error and saying Struct not present.
What you can do immediately is to go on your prodcution server and try to do a syntax check of the program. I am sure it will show some error and from that you can carry out issue resolution. Also ask the basis person to hvae a look in to ur transport(he can see the same via STMS Tcode).
Regards
Saket Sharma -
Error while Transporting Request
Hi All,
we have ECC 6.0 on Unix environment.
we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue. the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
while transporting other request its giving me error.
please help out me.Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza -
Error while transporting database index into quality system
Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.
Maybe you are looking for
-
Good Evening, I have just purchased a Macbook Pro, and have downloaded two SD cards of a trip to USA and Canada last September. One via Lightrooom 4 and the other via iPhoto. I tried to import the SD card via iPhoto into Lightroom 4 but could not fi
-
McAffee installation should not be in default, do you agree?
My suggestionn is not having it checked by default, since many users could accept it without knowing (by not observing the checked box, while trying a fast installation). And as many have another antivirus installed already, having both will be a mes
-
Hello SD Gurus, In standard SAP is there any transaction to find list of cancelled invoices. Regards, Kishore
-
Getting Invalid Cursor error in a procedure
Hi, I have a procedure(1) which inturn calls another procedure(2) which does some task. Procedure(1) accepts response from Procedure(2). The error code of procedure(2) is *0* which is the success response. Iam getting 0 from Procedure(2). But still P
-
Hi, This is regarding passing portlet parameters to the event handler. Whenever an event is raised, I have been using a javascript function, which constructs the URL to the portal event handler and then submits the form. The url would look like http: