Issue Regarding MB5B report

Hi......
When i am running standard report MB5B to calculatte opening stock and closing stock on the output screen i am getting one table with no data selected and the below screen shot of that MB5B report is attached in this discussion please go through and revert back.
As i am fresher there is a requirement to develop RFC to calculatte opening stock and closing stock please help me for which tables i have to refer.
The input should be only plant and from and to date.......Please help me....
Thank U...
Pavan Kumar K

Hi,
In MB5B report, on selection screen select the CATEGORY and tick all the relevant check boxes,
then under settings select
"Totals Only-Non-Hierarchical presentation layout"
Then execute the report.
you are getting blank screen in your screen shot because, there is no mvt in the materical code, neither issue qty nor receipt qty thats why you are not getting data.
Only opening n closing stock is available.
Just do as suggested, hope your issue will resolved.
-Regards
Rohit

Similar Messages

  • Issue Regarding Cyrstal Report Server 2008

    Hi,
    I've found some issue using crystal report server 2008 V1. The followings are my information for your reference.
    Could you kindly please let me know what you can help.
    -              My client has bought crystal report server 2008 V1 and deploy on the production server (window server 2008).
    -              We've developed the crystal report with command object.
    -              When we tested on printing report with 2 or 3 login user, report is successfully come out.
    -              When concurrent users to print the same report are about 100 or 200, then we faced Load Report Failed error.
    -              I've found that the Server Intelligence Agent service is stopped.
    -              When installing crystal report server, we've used the same database with our application to install report server's database connection.
    My questions are,
                    1. Cyrstal Report Server 2008 V1 can handle how many concurrent users?
                    2. Is crystal report can run without running Server Intelligence Agent service?
                       Or this service is stopped because of too many concurrent user printing crystal report?
                    3. What is your suggestion on the Load Report Failed when too many access to print report?

    Out of the box, the Crystal Report Server only comes with 5 named user license. So hitting it with 100+ users would result in all kinds of issues. I'm actually surprised you can hit it with anywhere close to 100 users. In order for you to be able to get to the high number of hits required, you will have to obtain more licenses. These are available in 5 concurrent user packs and you can add up to 4 of these packs. Any more than that, you're lookign at BO Enterprise.
    Some resources worth looking at:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202
    http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/crystalreportsserver/featuresfunctions/index.epx
    Now, yo have posted to the .NET developer support forum,  but it looks like you are not using any of the CR Server APIs. If that is the case, I'd recommend posting any further queries to the Business Objects Enterprise Administration forum:
    BI Platform
    Ludek
    Follow us on Twitter
    http://twitter.com/SAPCRNetSup

  • Issue regarding ALV report

    Hi all,
             I've created an ALV report which is having a editable checkbox box field and some more fields that are not editable.
    My requirement is that when i check any checkbox, some of the fields in that particular row should become editable.
    In table control it can be done easily but can it be done in ALV.
    Note: I have created the ALV through container as it was required.
    Thanks in Advance.
    Regards
    Dheeraj

    Hi,
    Basically you will have to first register the data change event after you display the grid as follows:-
        CALL METHOD y_lobj_grid->register_edit_event
          EXPORTING
            i_event_id = cl_gui_alv_grid=>MC_EVT_MODIFIED
          EXCEPTIONS
            error      = 1
            OTHERS     = 2.
    Here Y_LOBJ_GRID is my grid object of type CL_GUI_ALV_GRID.
    Then you will have to set a handler method for this.
       SET HANDLER y_obj_evt_handler->y_m_handle_cell_modified
        FOR Y_LOBJ_GRID.
    Here y_obj_evt_handler is a local class in your program and y_m_handle_cell_modified is the method of that class.
    In this method you can change the fields to make then editable or non editable.
    Regards,
    Ankur Parab

  • Issue regarding Standrad report for IT0057

    Dear All,
    Is there a standard report for infotype 0057(member ship fees)
    Regards
    Nalla

    Hi,
    You can use HARCSI00 report - this report evaluates both membership fees IT 0057 and payroll results.
    or
    You can use PC00_M99_CWTR (wage type reporter) and choose relevant Membership wage type to check the values.
    Regards
    Chandrashekar
    Edited by: CVKHCM on Jul 29, 2010 1:15 PM

  • Inconsistency in MB5B Report

    Hi All,
    I am getting an inconsistency in MB5B report when i am running this report from begining it is  displaying as
    (01.01.0000 - Date, 000 - Stock, Unit Value, 9100 INR). I have checked this value 9100 in Line item display of stock account, this entry has been created by an MIRO which was having difference from GRN so the system has uploaded this value to stock. This entry was created in JAN 2011 but i m not been able to find it in MB5B. I want to know why  system has behaved in this manner please provide your valuable inputs.
    Thanks
    Rashid.

    Hi
    MB5B report shows only the stcok movements, i.e material document from receipts or issues or transfer posting, it does not show the documents that are generated suing the MIRO transaction as they are not movement related documents.
    The posting that has occured is only in the accounting documents.
    Thanks &  Regards
    Kishore

  • Negative  stock in mb5b report

    hi
    I am having zero stock on 13.11.2008. I did MIGO(101) date is 13.11.2008. My system allowing me to issue material on 5.11.2008. So that my stock came in negative in mb5b report not in MMBE. i am not getting any error if i am posting in back date in same period when there was no stock. Can i know which msg nor should i have to activate or any other way to me that user will get error while posting in back date?
    Thank you
    Sameer

    hi
    plz check u might activated OMJ1 - Allowing Negative Stocks.
    http://www.sap-basis-abap.com/mm/how-to-use-negative-stocks-and-its-purpose.htm
    regards
    kunal
    u hhave already created same thread earlier
    https://www.sdn.sap.com/irj/scn/profile?userid=3846363
    https://www.sdn.sap.com/irj/scn/profile?userid=3846363

  • MB5B Report Qty Problem

    Hi All,
            I have some material Qty Problem while selecting different view in MB5B report.
    While in Storage Location view opening & closing stock is same as in valuated Stock,but Issue & recived Qty is doubled in Storage loaction view.i don't have PP & Qm Module.so we are doing PP Entry Thru 521 MVT.
    What is the possiable reaso for this.
    Regards
    Pavan

    Hi,
    MB5B is a standard report in which you will get the stock on particular date.You cna see the stock of previous or previous week.
    If you trying to execute the report with todays date as posting date,then system will consider all teh material movements happened today,so thats y system is showing 2 different stocks at different timings.
    to check what and all material movements happened today  for that material ,go to SE16 ,input table MSEG and check the material documents.take date and timings on which material document is created. then compare this with MB5B report
    Hope it helps

  • MB5B REPORT QUERY

    Dear All,
    I am facing the problem as said in the thread.
    My two queries are as follows:
    Query 1: In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
    M7284 - Storage location is reset.
    M7298 - Movement type is reset .
    Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
    Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
    ie have received material = 100 Nos 01-12-2009
    cancelled grn:100 Nos
    Redo grn:100 Nos
    Done transfer posting 415 Q = 10 nOS = 02-12-2009
    Issued = 10 nos = 02-12-2009
    In mB5B 01-12-2009 to 02-12-2009
    We are getting Opening stock= 0 which is correct
    Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
    Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
    Closing stock = 90(CORRECT)
    Here actual recipt: should be 100
    actual issue should be 10
    Here though the closing stock is correct , Cancelled GRN'S  & 415 transfer posting are  considered as issue and receipt.Becoz of this total issues quantity & total receipts report is going wrong.
    Please give your valuable suggestions to the above two problems seperately.
    Regards,

    Hi,
    Solution for Querry: 2
    I also faced the same problem.
    We need to give the selection dates (from  - to dates) and system shows the opening and closing stocks (and values) on those dates.
    But problem still persist with Receipt and Issue stock (and values).
    For Receipt and Issue Qty (and values) you will nedd to develope the Z report, in which you can make logical correction.
    for example: In Receipt Qty you can add all 101 movt types and on the same time subtract 102 movt type (which is not there in standard report).
    Regards,

  • MB5B Report for Date Wise Stock and Value

    Hi,
    I am Taking MB5B Report for Date Wise Stock and Value.
    But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
    I have another Doubt in these report three Stock type indicaters are there like these.
    1.Storage Location / Batch Stock
    2.valuated Stock
    3.Special Stock.
    But i have one doubt what is defferent these
    1.Storage Location / Batch Stock
    2.valuated Stock

    Hi Prasad,
    Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
    If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
    If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
    Regards
    Karthick

  • MB5B report

    Hi all,
    in MB5B report (article stock) showing field like this: Site, Article, Posting Date, Opening Stock, Total Receipt Qties, Total Issue Quantities, Closing Stock. Now when we click on particular row its showing materail (article) wise report and field showing Storage Location, Movement Type, Special Stock, Article Document, Item, Posting Date, Quantity, Base Unit of Measure.
    Now i want to create one another report ZMB5B and this all above field its showing in one report not different. So is it possible as a function and technical wise.
    Please reply
    Thanks
    SV

    can you please help me...... to resolve this case.
    thanks
    SV

  • Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

    Gurus,
    I am facing an issue regarding SAP TPM IP ( HANA)
    I have 3 Infoproviders
    Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
    Issue is  Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
    I tried debugging it and found it is trying to read   i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
    The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated.  So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
    Can any one help,it would be really help.
    Thanks
    Ashok

    Hello Gregor,
    On the launch of planning layout it throws an error message:
    Planning is not possible RSCRM_IMP_CORE008.
    When I debugged, i got to a point wherein
    particular Real Time Planning DSO is
    not getting retrieved under the MultiProivder in below class.
    Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
    returning the real time Info-Provider Name(i.e. Planning DSO)
    underlyingthe Multiprovider.
    I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
    Let me know, if you have any pointers on this topic.
    Thanks,
    Jomy

  • Performance issue of BI Reports in SAP Enterprise portal -in SAPNW2004s

    Dear friends,
    We are integrating BI Reports in SAP Enterprise Portal 7.0 ( SAP NW- 2004s).The reports are running properly .But the issue here is reports are taking long time to open and leading it to performance effect.
    Reports in BEX( Bi side) working lilttle better than EP platform.
    And Even BI team is looking for ways to improve the performance.
    Could you please share your ideas to implement in portal side to increase the performance.
    Thanks and Regards
    Ratnakar Reddy

    Hello Mr. Reddy,
    There are two possibilities for slow performance in BW reports, so we need to look into wether its slow in the BW system or at the frontend.
    If the problem resides in the BW system then we should be able to trace the reports
    and you can go for a SAP EW or GV sessin and SAP will provide recommendations.
    If the problem resides at the frontend
    Update the frontend servers to the latest frontend release.
    Recommended Frontend Release 700
    Recommended Frontend Patch      18
    Update the frontend servers to the lates SAP GUI release as soon as possible.
    Minimum Recommended SAP GUI Release 6.40
    Your frontend PCs should fulfill the following requirements:
    Each frontend PC should have 500 MHz and 128 MB main memory.
    Because of a limit in the addressable memory, Windows 95 is not supported as Frontend OS for 3.X BW Systems. Please refer to SAP Notes 161993, 321973 and 366626 for details.
    Please also check SAP Note 147519 "Maintenance strategy/ deadlines 'SAPGUI'".
    If you still require any assistance from SAP support then raise a message under component ( probably BW-BEX-ET-WEB).
    Provide your input, if you have any.
    Thank you,
    Tilak

  • Subject: How to get MB5B report in excel format

    Dear experts,
    Please help me how I get automatically MB5B Report in excel format. In Layout there is no option to convert excel format.
    regards,
    rss
    Edited by: rs_sharma on Jun 26, 2011 10:16 AM

    Dear experts,
    Please help me how I get automatically MB5B Report in excel format. In Layout there is no option to convert excel format.
    regards,
    rss
    Edited by: rs_sharma on Jun 26, 2011 10:16 AM

  • Difference in MARDH & MB5B report

    Hi,
    I'm comparing the previous period stock  using MARDH table with MB5B stock report but closing balance what we get from MB5B report is not matching with the MARDH Table.

    Hi,
    MB5B: Gives Opening and Closing stocks for a given date range.
    MB5B calculates the stock at a certain date by reading all movements (adding receipts and reducing goods issues)
    MARDH store Stocks for Periods (Months).
    MARDH has the historic stock at month end. A MARDH record for the last period is only created if a new movement in the current period has changed the stock level.
    Example. If you had 100 stock in April and you had a goods issue of 20 in May, then you will get a MARDH record for period 01 with stock of 100.
    If the stock situation has not changed until today (period 10-January) then you see the stock of 80 in table MARD, and the last MARDH record is the record of period 01 with stock of 100.

  • Variance in MB5B report

    Hi Fnrds,
      When in execute the MB5B Report for one of my finished products , i get some variations .
    In the Stock type tab i have two options :
    a) Storage Loc/batch stock
    b) Valuated Stock .
    When i execute( Current month ) this repot with option A and then with option B i am getting a variation in my closing stock.
    Out of 500 material i am getting variation only for one material . what could be the reason for this.
    Regards
    Rakesh

    Hi rakesh,
    Check the particular material whether the material type have the valuated or non valuated stock.
    If non valuated then OK. the stock difference is correct.
    becuase the S. loc stock contain valuated & Non valuated stock.
    SAM
    Edited by: Saminathan Gopalan on Jun 11, 2010 12:01 PM

Maybe you are looking for