Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Similar Messages

Planning layout is not working in CRM

Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj Kulkarni

Hi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks.

Savings Plan Contribution is not getting processed in Payroll

Hello Friends,
We are in the process of upgrading our system from 4.0 to 4.7, After correcting the schema as per the release/OSS notes, we are getting Savings Plan Contribution as blank (Retirement Savings).
Cumulation values are coming thru right but current period contribution is missing.
Earlier we had P0169 with P61, now we do not see processing class(PCLS)61 in the PCLS list. Our earlier wage types were referring to PCLS 61, I am not sure if this is causing an issue.
Please let me know if you have any faced similar situation and have an answer.
Thanks & Best Regards
ravi

Ravi,
Appriciate if you could share the solution for your problem in savings plan contribution is not getting processed in the payroll. As I am facing the same kind od problem for my new configured benefit plan ROTH 401k plan.
Please let me know the solution.
Thanks & Regards,
Sunita

Flash content in browser dialog is not getting rendering with IE10 - Windows 8

Hi,
I am trying to launch window popup dialog. The dialog points to HTML page which loads swf file.
Everything works fine but in case of IE10 on Windows 8, the flash content is not getting rendering inside popup dialog.
I have verified that .swf file loads but it is not showing its content. If I close the dialog, the flash file conten get diaplay for a moment.
This isssue occurs if I open dialog using showModalDialog or showModalessDialog. Works fine if popup opened using window.open.
Reiterating again - this issue occurs only with IE10 on Windows 8. It works fine otherwise with IE10 on Windows 2012, Firefox on Windows 8 and on both browser in rest of the windows version.
Look at it get the clear idea - http://youtu.be/SupJYZoLk5I.
Requesting you to share your idea.
Thanks,
Prithveesingh.

Firefox does not use the same version of Flash as Internet Explorer, you need to download and install the version of Flash used by Firefox.
Using Firefox go to http://get.adobe.com/flashplayer/ to download the installer, then run this file to install Flash.
This support article has further details - [[Install the Flash plugin to view videos, animations and games]]

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

I-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).

Hi
My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
I have updated the latest OS 6.0 in my i-pod touch.
Kindly send the solution
Regards
Deepak
<Email Edited By Host>

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also, you are not addressing Apple here. We are all just users like yourself.

Credit note is not getting generate and there is no error log

Hi,
Could you please help with the following scenario.
I have created a credit memo with reference to a billing document. Then when I try and create a credit note for this credit memo, it does not get generated and the following message apprears 'No billing documents were generated'
Processing status for this is - 'Not Processed'
and there are no messages in the error log as well.
Could you please advise as to what the missing configuration might be? As i can't seem to find what is causing the problem
Your advise is much appreciate.
Thanks & Regards,
Amalie

Kindly create a Credit Memo Request wrt to Billing Document by maintaining in the Copying Control through VTAF and then create a Credit Memo wrt Credit Memo request through VTFA.
Then go to VOFA with your Billing Type and maintain Account Determination Procedure.
it does not get generated and the following message apprears 'No billing documents were generated'
Do you able to get the Number while saving the Credit Memo or not able to save it .
Kindly check the configuration of Account ket in VKOA also .
Best Regards,
Ankur

Sorry, something's gone wrong. Could not get credit and pack information.

Every time I log in I see this message Sorry, something's gone wrong. Could not get credit and pack information. I have been to an EE store and they couldn't do anything there. So I called the costumers service and after 30 min on the telephone they told me the problem was fixed and I should just wait 24 hours before log in again. Today is been more than 48 hours and I still have this problem. I can't buy packages but I can pop up. How can I fix this problem?

Hi
Sorry to hear you are all having a problem.
Please Contact Us as the issue needs to be investigated.
Thanks

Demantra 7.3 ,Analytical Engine Is not getting up and getting terminated

Hi,
When i am trying to make my Demantra 7.3 - analytical engine up on linux server, is not getting up and getting terminated. Can any body help me in the same.
For your information
Mine Weblogic server is 32 bit and linux operating system is 64 Bit.
Thanks in advance.
Thanks,
Ankur Dawra
Edited by: Ankur Dawra on Aug 16, 2010 2:52 PM

If that specific patch is causing a conflict with CU7 or Rules Engine Update Service, the best option would be to LOG a case with Microsoft and let them either fix it or provide a justification of why that specific Windows Patch is not a good idea (file
an exemption in case of later with the customer/security team).
Regards.

I can not get iPhone and iPad calendar to sync. Help

Help. I can not get iPad and iPhone calendar to sync

Please also check, if the appointments you already have entered on one device are stored in a iCloud calendar or only local or in another account. Therefor just open the calendar app, then open an existing appointment, click on "Calendar" and then check, if it is really an iCloud calendar where the appointment is stored.

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

I installed Mac OS 10.9.4, but did not get iLife and iWorks. How can I obtain these

I installed Mac OS 10.9.4, but did not get iLife and iWorks. How can I obtain these? Somebody talked about redemption codes, but I did not find any extra information. Any suggestions?
Thanks in advance and best regards

If your computer shipped with Mac OS X 10.6.8 or earlier, install them from the computer's original disks.
If your computer shipped with Mac OS X 10.7 or newer, log into the Mac App Store with the Apple ID used to register the computer, click on the Purchases tab, and download them.
If neither of these is applicable, buy them from the Mac App Store.
(109450)

Failed to start message bus: Could not get UID and GID for username "d

Today ive updated my system and got this mesage on boot
Failed to start message bus: Could not get UID and GID for username "dbus"
My keyboard doesnt work..not on usb or ps2.
After 2 years over using arch on stable repo i got this very ugly bug...S***
ill use minimal cd to reinstall core...it seems i cant get on tty working

phoenix, don't post in old threads: http://wiki.archlinux.org/index.php/For … Bumping.27
Try reinstalling dbus-core - if that doesn't work, start a new thread.
Closed.

TS1567 My apple iphone is not getting started and i can find only apple logo when connected to system\

apple phone 3g is not getting started and i can find only apple logo when connected to system and my system is not recognizing the mobile device. kindly help me in this regard

Put the device in DFU mode (google it) and restore as new.

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Similar Messages

Maybe you are looking for