Issue regarding supported platforms manual for BO XI 3.1 sp2

In supported platforms manual for BO XI 3.1 sp2 windows there is a note on page 7 for specific patch level for OAS 10gR3 u201CPlease see release notes on the minimum version supported for Dashboard and Analytics.u201D We try to find on release notes (BOXI 3.1 & BOXI 3.1 sp2) for the exact patch level but there aren't any suggestions.
Could you please inform about the exact patch level that is needed on OAS 10gR3.

Hello,
Many thanks you for your answer.
Sorry to insist. It is not really clear in the SAP documentation about the minimum level of SAP NetWeaver BI 7.1 required
for installing "Business Objects XI 3.1 SP2 Integration kit for SAPSolutions.
Could you please find out (and provide me them) :
- The minimum BI 7.01 patch level for installing Business Objects XI
3.1 SP0 Integration kit for SAP Solutions (initial installation
package).
- The minimum BI 7.01 patch level for installing Business Objects XI
3.1 SP2 Integration kit for SAP Solutions
Thanks in advance
Best regards

Similar Messages

Issue Regarding Multi-Out's for my Audigy

I bought and Audigy 2Zs about a year ago, and have had no issues with it up until this point, using a series of creative lab 50 watt 5. speakers. However now i am running the Audigy into a 600W Sony Reciever, and using that to output to the speakers. IT does not output correctly, and for some reason i can only get the Sub or Center to work, but never both. I need to know the actual output paths for each signal, or a way to get a 6. setup to connect to my receiver. The Recei'ver is hooked up properly , all speakers work when used with a CD player.
The Recei'ver the following jacks.
A right/left Front multiin
A right/left Rear Multi in
A Center and Sub Multi In
The Center and Sub in,only allow one channel at a time to, result in one channel at a time to work.
IT also has a Single DVD IN on the Digital Side, and an Optical IN.
It has many other ports, that are analog, and that have only left or right channels.
I have tried many configureations, and nothing seems to work. While i understand you guys can't do support on my Recei'ver,.....
What you could do is tell me what my receiver (as far as codecs or input ports, ect) would need in order to make the output from the soundcard spread to the correct speakers. I'm computer literate, so spare no detial on how i would get this to work. I understand i may need a new reciever, but i want to know exactly what input ports i need, what codecs it would need to have, and what settings i should tweak in AudioHQ. Thanks for your time.

Bryan,
If you are connecting directly into the multi-in on the back of your receiver then it should be working correctly. One thing I need to know, you say that it only allows one connection at a time for the center/subwoofer plugin. Is this a specifically listed feature for the receiver or is this just what you are experiencing. If it is the way that Sony says the receiver works then there may not be much you can do to get this to work. If it is just in your experience I would have you check to make sure there are no settings that you are missing for the multi-in. This is the recommended way of connecting if using an external receiver and your description sounds like the connections are correct.
Jeremy

SAP Solution Kit - Supported platform document for BO XI 3

Dear Mauro
Please try this link:
https://websmp210.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000712240&_SCENARIO=01100035870000000202
Roland

Hi,
The link is the right one.
on the tree structure on the left hand side select Suppported platforms > BusinessObjects XI 3.0/Crystal report 2008.
Then on the Right hand side expand BusinessObjects Enterprise.
in the list you will see the SAP Solution kit platform.
regards,
Adil

Know more detail about the Remote Support Platform for SAP Business One ?

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena

You are running an operating system that Illustrator no longer supports. Refer to the system requirements for a full list of supported platforms.

"You are running an operating system that Illustrator no longer supports. Refer to the system requirements for a full list of supported platforms."
This is the message I received when I want to download free trial of AI CS6. What should I do?

Hi Aram.Smo,
Please refer the following system requirement for Illustrator CS6.
http://helpx.adobe.com/illustrator/system-requirements.html#Illustrator%20CS6%20system%20r equirements
Hope this helps.
Regards,
Sumit Singh

When I tried to download app, the answer was "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms". My computer is a MacBook Pro. I need help.

When I tried to download CC app, the answer was "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms". My computer is a MacBook Pro, running Mac OS X, version 10.6.8. I need help.

Hi Younghee,
You may also refer to the help document below to know more about the technical specifications:
System requirements | Photoshop
Regards,
Sheena

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

Supported platform for EHP6 installation

Hi guys - Can anyone answer this question. I can not find this info on PAM or SDN. Please help.
We are installing ERP 6.0 EHP6. We know that Oracle supports EHP6 on Linuux REDHAT 6.0 only for development.
We do not want to take a chance just in case there is a delay in support on REDHAT 6.0. Therefore we are planning to install the system on REDHAT 5.7.
Can anyone let me know if ERP6 EHP6 installation is certified on REDHAT 5.7?
Thank you in advance.

Thx guys - after months of communication with SAP, I thought to share my findings with whom might have the same issue.
Although you donot see RHEL5.7 on PAM, it dosen't mean they donot support it. They want to walk away from supporting RHEL 5.7 on 7.20 kernel. Therefore they recommend to go with RHEL 6.0 and 720 ECT kernel. However there is a SAP note that is not released to public and I can not share the note, it states that by replacing few components of 720 EXT kernel with 720 Kernel, you can implemnt the EHP6 on RHEL 5.7.
Therefore, If you are a ramp-up client for this product and you do not see the supported platform on PAM, I recommend that your coach to contact SAP development team for clarification.
Regads
Kourosh

Got the following message when trying to install Photoshop CC "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." I use Windows Vista so not sure what I need to

Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.

Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop

Issue regarding consecutive run for an Interface

hi all,
i have an issue regarding an interface
if this Interface is a initial run for the file, you have to populate all the data of the people. That is , unlike other interfaces where we send only the latest record, in this interface we need to send all the records of the employees. in a employee has 10 records with different dates, we will pick up all the records greater than 1999 and pass it. whereas if there is a change in one field, then we will send all the record of that file. And If it is a consecutive run then you have to populate changes only. the following algorithm can help you in this
if intial_run EQ 'X'
transfer IT_FINALDATA to XI.
else
Declare a 2 more internal tables similar to IT_FINALDATA...for our below example let us assume that
         DATA: IT_CLUSTERDATA type standard table of IT_FINALDATA.
         DATA: IT_COMPAREDATA type standard table of IT_FINALDATA.
use the following statement to retrieve the data from cluster and comparing it
        IMPORT IT_CLUSTERDATA TO IT_COMPAREDATA FROM DATABASE indx(zn) ID 'IN_8085'.
        Compare IT_COMPAREDATA with IT_FINALDATA
If sy-subrc = 0.
Means there are no changes, and no output required
Else
Pass the data to XI interface, And store the internal table in the same INDX table, using the following statement
EXPORT IT_FINALDATA to IT_CLUSTERDATA FROM DATABASE indx(zn) ID 'IN_8077'.
Endif.
In this can we deliver the changed data at every single consecutive run.
Please let me know,
Thank Q
Rohini.

This is something where HR Interface Toolbox (PU12) can be very helpful, it will take care of changes from one run to another and you can configure it to send changes only in next run. But, you will need some ABAP in its user exits to restrict the data after 1999, and any other restrictions that you might want.

Issue regarding to change taxcode in tab Gl-account for T.cod MIR7

Hi Expert,
I have issue regarding Tax code in Tab Gl-account for t.cod MIR7 which come by-default , i wan to change that taxcode based on purchase order number which also have tax code with multiple line item in tab PO Refrence,,i want first taxcode of tab PO Refrence to be copied in first line item of tab GL-account based on po number ,can anyone put a light on this issue with priority..
Regard's,
shaikh khalid.

Hi,
You can clear the old items posted in 28000 with the other leg in suspense / clearing GL Account.
Once the above is done, please post once again to Vendor clearing the suspense / clearing account.
Ensure that the suspense / clearing account does not have any open items.
The lines are transfered to new recon account.
Hope this helps, if yes, please assign points.
Regards,
Sankar

I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

You need to use a credit card with a billing address in the same country as the delivery address. Since there's no Apple Print Store for Costa Rica I assume you're using the United States print store. Therefore you'll need a credit card with a billing address in the US.
OT

What are the supported Platforms and system requirements for JSE?

What are the supported Platforms and system requirements for JSE?

Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

Supported platforms for FIN 9.2

Where could i find the platform requirements for client and server operating systems for our new Peopelsoft Finance 9.2 Release and also platform requirements for Database ?
Thank you,
Rutvi

you can find all the details in support.oracle.com under "Certifications" tab

Issue regarding supported platforms manual for BO XI 3.1 sp2

Similar Messages

Maybe you are looking for