Issue related list of values component

Hi,
If we open list of values component in advanced search mode, and try to stretch the column width,
component shows one horizontal scroll bar to scroll.
However if we try to scroll the scroll bar, it doesn't work. Also we can't see the data hidden due to column stretching.
How to fix this issue?
Jdev version : 11.1.1.4.0
We are facing this issue related input list of values component throughout our application.
Thanks in advance.
yamini.

Hi,
Thanks for your reply.
Following are the steps to reproduce the above issue:
1. Click on list of values button.
2. Click on "Advance" button in search & result dialog pop-up.
3. Expand the column width & Horizontal bar will be available.
4. Notice that Horizontal bar is not working.
Yamini

Similar Messages

Issues related to Software Product & Component Import from SLD to IR

Hi XI Gurus,
Can you please provide me solutions on these:
1. How can I delete / remove from display some Software Product (top node) from the Integration repository ?
By mistake I imported all the available software components from SLD while I attempted to import a specific one. Now it built up a big list causing navigation problem and therefore I want to get rid of these newly imported ones. Is there really a way to revert back something imported from SLD?
2. What need to be done from the SLD / IR side to see a newly created Product in SLD for import to IR. I created one product in SLD but not able to see the same in import list from SLD in IR.
I'm a new XI developer just started working on a POC project. Please don't mind if these are silly questions.
Regards,
Subhadip

Das,
<i>1. How can I delete / remove from display some Software Product (top node) from the Integration repository ?
By mistake I imported all the available software components from SLD while I attempted to import a specific one. Now it built up a big list causing navigation problem and therefore I want to get rid of these newly imported ones. Is there really a way to revert back something imported from SLD?</i>
Solu:
If you want to delete the software component in IR then delete all the interface mappings, message mappings, message interfaces, message types, data types and then all the namespaces. Then you can delete the software component. For your reference check this weblog on the same:
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Also check this thread for the same:
how can i delete software component in the IR
<i>2. What need to be done from the SLD / IR side to see a newly created Product in SLD for import to IR. I created one product in SLD but not able to see the same in import list from SLD in IR.</i>
You dont need to do anything if you have created all the steps in SLD. Just you have to import it.
Check this weblog for your reference:
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
---Satish

List of Values in Data foundation Layer Bi 4.0 Issues?

I have an issue surrounding list of values’ created in the data foundation layer created using SQL.
The LOV can be associated with an object within the business layer. The business layer is then saved and closed, however on re-opening the association with the LOV is now displaying an error.
We are currently on patch 15 of sp2, are you aware of any issues using LOV from the data foundation layer.

This has now been fixed in sp4.

How to Hide advance button in input list of values Popup

I am using input List Of Values component to select value from search Pop up, in that popup i need only basic search only , i am unable to hide advance button... plase tell me how to hide this advance option

I haven't tried this, but check
How to remove basic/advanced button in inputListOfValues search dialog
This does not have complete solution, but might give you some lead.

Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

How to send a list item value to URL to open data related to item value

Hi,
Iam using Apex4.0 and iam facing some problem. Iam unable to send selected list item value to the url specified in the HTMl region.
Here i want to open the data related to list item value in other page.
List item - :Familyp
i want to pass this selected value to the url and when ever user selected the list item and clicks on the url, then it should display the item value related data in new page.
I tried with &FamilyP in url but it's not working. Any one help me plz.
Regards
Vamsi.Tata

Is it a normal Select list or Multi Select list?
If you have select list that allows you to select multiple options then you cannot pass it through URL. Multi-select /Shuttle keep colon separated list in the item, and this confuses Apex because the Apex URL uses colons for a different purpose. No escaping or URL encoding will help.
If it is normal select list that allows selection of only one option then you can pass through the url. Unless of course the data has a colon in it.
For multi-select, and when the value contains colon, the only way is to save the value in session state, same page item or any other place like Application Item, and then reference it at the other end. Never pass through the URL.
Regards,

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

How to add data in related issue field in issue tracking list sharepoint 2013

Hi,
I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Urgent.. Tab out issue with ADF 11g Input List of Values..

Hi,
I have Customer Number Input List of values on the page(some people also "torch").When we type customer number and tab out it's not bringing the customer name automatically.
It would be really appreciate if anyone can help me on this..
Thanks

Hi Frank,
The scenario is like this:
I have a LOV on Item Field,and the Customer table has CustomerNumber and CustomerName(around 100k records).
User Enters the CustomerNumber say 1000 then the LOV Window should automatically validate and findout the CustomerName without poping up the window.
Actually what ever user entered is a correct value.how can i solve this issue , if there is a correct matching value in table it shouldn't open up the LOV window.
I am using jDeveloper 11.1.1.0.0
Please let me know if you need any further infomation.
Thanks

Dynamic DFF List of Value - Issue

Hi
I'm stuck up in a problem and I'm sure you will have a solution for this.
Please read the following and suggest me some solution.
Requirement : Right now I'm not finding any functionality for Inter Org requisition related to InterOrg Transfer(Intransit Shipment)
So I Have created a Custom InterOrg Requisition Form.
Custom table
IOR_HDR( IOR_NO, From_org, To_org)
IOR_DTL ( IOR_NO, Item, Quantity)
Now I want to give Custom Form Reference Number (IOR_NO) while InterOrg Transfer(Intransit Shipment) in line level DFF valueset. (This is the only solution I found, Please suggest if any other better solution is there)
With that I have to provide only those IOR_NO in List of Values which satisfy the condition
IOR_HDR.From_org = From Org entered on that screen ($PROFILE$.MFG_ORGANIZATION_ID)
IOR_HDR.To_org = entered on screen ???
IOR_DTL.Item = entered on screen ???
IOR_DTL.Quantity >= Entered Quantity ???
With that on second line if same item is entered then also Quantity should be sum of 2 lines and compare it with table quantity.
Should I use custom.pll or Form Personalization of direct use value set or any thing else ??? and How??????
Standard InterOrg Transfer Screen
Thanks in advance.
Priyanka Patel.
[email protected]

wow thats great sunil : )
Can I also reference the value of P7_ITEM_NAME in anotheR item name like P7_COMMISSION?
For example: I have two (2) item names: P7_SALARY and P7_COMMISSION
P7_COMMISSION is computed as :P7_SALARY * 0.10
So I do not have to enter value in the item name P7_COMMISSION as it is derived from P7_SALARY.
Is this possible? if not why does LOV able to access it ; )
Thanks a lot

Assigning multiple values from a List of Values at detail (table) level

Hi,
I have a master detail entry screen. I want to assign multiple values when end user selects an item from the list. The field is at detail level (Table type). I can do it using the "Select one choice" type component (ADF Faces Core) but it doesnt retain the value when I go to the next record. This type of component works fine with the screen with only one record to show (form type). This component has binding with list type.
If I use simple list with Table binding, I can not assign values to multiple items. This type of list retains value when record is changed.
Can anyone help me resolving this issue?
Thanks,
CAH

Post on Jdev forum JDeveloper and OC4J 11g Technology Preview
--Shiv

List of Value: Best practice when there are too many rows.

Hi,
I am working in JDev12c. Imagine the following scenario. We have an employee table and the organization_id as one of its attributes. I want to set up a LOV for this attribute. For what I understand, if the Organization table contains too many rows, this will create an extreme overhead (like 3000 rows), also, would be impossible to scroll down in a simple LOV. So, I have decided the obvious option; to use the LOV as a Combo Box with List of Values. Great so far.
That LOV will be use for each user, but it doesn't really depend of the user and the list of organization will rarely change. I have a sharedApplicationModule that I am using to retrieve lookup values from DB. Do you think would be OK to put my ORGANIZATION VO in there and create the View Accessor for my LOV in the Employees View?
What considerations should I take in term of TUNING the Organization VO?
Regards

Hi Raghava,
as I said, "Preparation Failed" may be (if I recall correctly) as early as the HTTP request to even get the document for indexing. If this is not possible for TREX, then of course the indexing fails.
What I suggested was a manual reproduction. So log on to the TREX host (preferrably with the user that TREX uses to access the documents) and then simply try to open one of the docs with the "failed" status by pasting its address in the browser. If this does not work, you have a pretty good idea what's happening.
Unfortunately, if that were the case, this would the be some issue in network communications or ticketing and authorizatuions, which I can not tell you from here how to solve.
In any case, I would advise to open a support message to SAP - probably rather under the portal component than under TREX, as I do not assume that this stage of a queue error has anything to do with the actual engine.
Best,
Karsten

NULL value in static list of values???

I'm creating a static list of values and I want to check against these values in a table with a sql query. My question is, can I have the value for one of the items be NULL? Like, is the following static list of values ok:
STATIC2:No Status;,Hire;HIRE,Reject;REJECT,Maybe Later;LATER
I want it so that if someone selects "No Status" in my select list, that I check my column in the table for all records that have NULL for this value. Is that possible? Or will I have to create 2 separate queries (1 for NULL, and 1 for all the other values)?

Actually, I had tried it, but wasn't getting an expected result. I couldn't figure out if this issue was causing my error, or something else, so I posted the question asking if it was possible to do so to try and track down where my error was coming from.

Prompt List of Values in WebI - SAP BI Variable - SAP BI Query -BI Infoset

Hi,
We have a Multiprovider built on an Infoset. SAP BI Infoset is built using 2 DSOs.
There is a SAP BI Query on top of this Multiprovider.
Multiple-Single Values type Optional Variables are created for some of the Objects of this SAP BI Query.
Universe is created on top of this SAP BI Query, using SAP Integration kit.
WebI is created on top of this Universe.
Prompts are created on some of the Universe Objects, for the WebI report.
We are facing a typical problem.
When a WebI prompt is created on one particular object, (which also has a Multiple Single Value type Optional Variable in SAP BI Query), its List of Values is showing up only first three values in WebI. The SAP BI Variable in BEX Analyzer shows up all the 8 values for the List of Values, for the same object.
The Output WebI report has more values for the object than shown up in the List of Values & this is the problem.
We tried to keep the settings in Info-object, DSO, Infoset, Multiprovider = Values in Master Data (for the List of Values).
Similar objects and similar variables for the same query / webi show all the List of Values.
Any guidance on aspects to be checked would be helpful.
regards,
Rajesh K Sarin

Problem :
If an SAP BI Infoset is used in data modelling, and a restricted key
figure is created in the SAP BI Query; the resultant WebI Object Prompt
for the Info-object, only shows up LOVs which have been used for the
restricted Key Figure. Both the things are not related except for the
fact that some of the values for the same object are used for the
restricted key figure.
Details :
We have a Multiprovider built on an SAP BI Infoset.
SAP BI Infoset is built using 2 DSOs.
There is a SAP BI Query on top of this Multiprovider.
There is a restricted key figure in the sap bi query. KeyFigure "Number
of Records" is restricted for 3 of the relevant Info-object "Meter
Reading Status" values.
Universe is created on top of this SAP BI Query, using SAP Integration
kit. WebI is created on top of this Universe.
Prompt is created on the Universe Object for Meter Reading Status, in
the WebI report.
List of Values is showing up only the three values in WebI (which were
used in the Restricted Key Figure calculation).
SAP BI Variable in BEX Analyzer for the same Info-object Meter Reading
Status shows up all the 8 values for the List of Values.
The Output WebI report has more values for the object than shown up in
the List of Values & this is the problem.
We have kept the settings in Info-object, DSO, Infoset,
Multiprovider, Query = Values in Master Data (for the List of Values).
When we delete the "Restricted Key Figure" from the SAP BI Query, the
refreshed Universe and Webi have a complete set of List of Values
applicable.
Steps for Reconstruction
1. Create Infoset
2. Create SAP BI Query on Infoset
3. Create Restricted Key Figure for Number of Records and few of the
values for a characteristic info-object "X".
4. Create BO Universe on SAP BI Query
5. Create Webi on BO Universe
6. Create a Prompt on the characteristic info-object "X".
7. Check List of Values for the characteristic info-object "X" in SAP
BI Query and WebI.
8. LOVs in WebI are equal to the values used for restriction in the
restricted key figure.
9. Delete the restricted key figure from SAP BI Query.
10. Refresh Universe
11. Webi prompt shows all the values for the prompt on "X".

Filter view object by selected values from list of values

Hello,
I've the following problem with my ADF Application. I have three view objects in my application module. Two of them are connected via a view link. For example take users, who are connected to their departments. The remaining view object consists of factories. Now I want to show the user/department dependency in a tree table and the available factories in a list of values. This list of values should be used to filter the shown users.
I've already tried to use bind variables in the users view object. But I don't know how to fill them with the value of the list of values.
Can someboy give me a tip how to solve this problem.
Best regards,
Enno

Hi Enno,
Try this:
- Have a AM method with one parameter(which takes user from the list of values) and inside AM method write code to set the bind parameter value and execute the query
Sample Code
public void filterByUser(String user){
   //Get your UserViewObject instance to userVO
   userVO.setNamedWhereClauseParam("<Bind_Variable_Name>", user);
   userVO.executeQuery();
}- Expose the method as client interface
- Drop the method (Data Control) as a button on to the page and pass the listofvalues value as a value to the method binding param
Something like this: ${bindings.<User>.inputValue}
- Finally refresh the master and detail tables based on the ListOfValues selection by setting partialTriggers property to the listofvalues component id
Hope it is clear
Sireesha
Edited by: Sireesha Pinninti on Oct 15, 2009 4:54 AM

Issue related list of values component

Similar Messages

Maybe you are looking for