Issue related to CTS+ Transports

Hello,
We have completed CTS+ configuration on PI (EHP1 SAP Netweaver 7.0) following SAP CTS+ How-To-Guide.PI Development is Domain controller and all paths and parameters in SAP Exchange profile are maintained.
Transport request is successfully created from PI with no errors. Also If we create empty Non ABAP transport u2013 with no object included it works fine.
Now we are facing some issue related to release of Non ABAP transports (transport remains in status u201CRelease Startedu201D for hours and no process/file update at OS) and no export file is created in path maintained.
For release started status issue we were able to change the status of same to modifiable after 32 hours from release started status to sort this issue.
But we are unable to release transports successfully with these non-ABAP objects.
Please help.
Thanks & Regards,
Nisha

Thanks for quick reply Tom!
We have performed EHP1 Upgrade few weeks back and below are SP levels - so I don't think any issue related to patch levels:
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0003     SAPKITLRD3     SAP Solution Tools Plug-In
SAP_BW     701     0007     SAPKW70107     SAP Business Warehouse
ST-A/PI     01M_BCO700     0000          -     Servicetools for other App./Netweaver 04
I am trying to check SAP notes as well.
Thanks & Regards,
Nisha

Similar Messages

  • Issue related to transportation of objects

    Hi Experts,
    I am very new to BODS tool.I have an issue related to transportation of Objects.
    Please be noted that , there was already a project (X) existing in dev system and the same project (X) is already exists in quality system as well.
    Now we got the requirement to replace the new source table to the existing source table in one of the dataflowin the Project(X). So in dev system for the same project (X) ,we have created a new datastore and imported a new source table into that datstore and used this table in that particular Dataflow to replace the existing table in the same project(X).
    After doine this changes, its working fine in Dev system.
    Now I wanted this changes to be transported in qual system as well.
    So I have logged into Designer in quality system. In central repoistory, I was able to see two central repositories.One for Central Repoistory of DEV and Other Central Repoistory of Quality.I hope I need to view Central Repoistory of Dev( please correct me If .In this central repository(dev) I was able to view the same Project(X) but the latest changes were not reflected ( I mean to say new datastore and new source table in the dataflow were not been seen). So I have refreshed the central repoistory,still I was unable to view the latest changes in the same project(X).
    Could anyone please guide me, what all steps I need to do, to get this changes reflected in quality system as well.
    Please be noted that, I am working on BODS 4.2 version
    Appreciate for your quick responses.
    Thanks in advance.

    Hi Cris,
    First remember that when ever you are doing changes in existing project first you have to take the latest version of that project then you can do your changes.
    Step1: Take latest version of code from Central Repository of DEV  into your local repository then do yuor changes.
    Go to Tools---->Central Repositories then select Central Repository of DEV then activate it. then get latest project from Central Repository of DEV.
    Getting latest project from central---->Go to Tools---->Central repository library---> select your project---->rightclict---get latest version--->objects and depence.
    I am not sure you made changes in latest code or not?
    Step2: After you made changes in your local repo go to Tools---->Central repository library---> select your project---->rightclict---checkout-----objects and depence without replacement.
    Step3: Go to Tools---->Central repository library---> select your project---->rightclict---checkin-----objects and depence. Now your changes moved to Central Repository of DEV.
    Step4: Login to Quality system.
    Step5: In Qaulity---Go to Tools---->Central Repositories then select Central Repository of DEV then activate it. then get latest project from Central Repository of DEV to Qaulity system.
    Getting latest project from central---->Go to Tools---->Central repository library---> select your project---->rightclict---get latest version--->objects and depence.
    Now Latest code transported to QA.
    Thanks & Regards,
    Balamurugan G

  • CTS+ Transports and PI

    Hi,
       Should PI transports (ESR/DESIGN Java Objects "TPZ") now follow the same route as ABAP transports as they can now be linked to ABAP transports.
       Traditionally in PI I would;
    1. Transport out of DEV -> TEST with transport targets set.
    2. Activate the change and test
    3. Build a new transport in TEST for PROD with the same object with transport targets set TEST->PROD
    We are using 3 SLD'S DEV - TEST - PROD if the DEV objects exported are applied to PROD (like ABAP after testing). The SLD in prod needs to know about DEV business systems.
    Can anyone shed any light ?

    Sorry I think you missed the point....
    Does using CTS+ change the way transports work for TPZ PI Objects ...
    Do you apply a transport created in DEV directly to both TEST and PROD - like ABAP.
    or
    Do you apply the transport to TEST then re-export from TEST into PROD - like CMS typical way of doing PI transports ..
    My issue is, if you transport like ABAP -> apply transports in DEV directly to PROD as well as TEST the SLD in PROD needs to know about the DEV Business systems in order to apply successfully, this would seem like the sensible way to manage software logistics when CTS+ is involved as both ABAP and Java Objects are tied together, but I dont like having DEV systems in the PROD SLD.

  • Hello  I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.  Following my issue relating to a

    Hello
    I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
    Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
    Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
    The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
    Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
    My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
    This where I stand on this, I have not had my iMac for  almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
    I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
    I trust you will take this complaint seriously and pass it to the relevant department for action.
    Yours sincerely
    Des Withey 
    Sent from my iPad
    On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
    Thanks for contacting us.
    Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
    Case ID:
    Open this case
    Sincerely,
    Apple Support
    Get help online
    Visit Apple Support to learn more about your product, download software updates, and much more.
    Join the conversation
    Find and share solutions with Apple users around the world.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
    All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
    On behalf of Apple Distribution International

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • Regarding issue related to  RPTBAL00.it's very urgent

    hi All,
      i am having one issue related to RPTBAL00 report.
      this report will dispaly time wage types related to emplyoees.
      using this report we can get informtion of time wage type like 9lc1,9lg1,plwp.
    Now issue is this report is not running for payroll area 56.it's running properly for other payroll area.the pernrs realted to 56 payroll area have the data in there B2 cluster.i wanted to access data from zl table realted to 56 payroll area.
    Please help to solve this issue.
    who will help to solve this issue,i will give full points.
    Regards,
    manjunath

    i did the same thing.in standard FM hr_time_results_get,it is accessing data from B2 cluster.after that it is checking condition for the date of last successfully run period.only for pernrs related to 56 payroll area it's not wking.for all other it's wking.
    also i dnt have autorization to change std FM.

  • Issue related to Section

    Hi Experts ,
    I have an issue related to Section.
    I have an report which shows  Department Name and the employees  under each department.
    For this report, we have used "Section" on  dimention Object "Department Name".
    Now  the issue is , when this report is being exported to PDF. In PDF, for some departments , Department name is  in one page and its related employees data are in next page.
    In some cases, Department Name and first few  records  are in same page and rest of records are in next page.( Let's say in department 'X' there are total of  30 employees . So in one page its showing department 'X' and its 10 employees in same page and rest of 20 employees  of that particular department are shown in next page ).
    And in some cases , only Department Name is in last line of the bottom of the page and its related employees are shown in the next page of it.
    Can we have any option, which will show  both Department Name and its related data only on the same page?
    Please be noted that I am working on BO 4.1 version.
    Appreciate for your quick responses.

    Hi Cris,
    Check start on new page and avoid page break in section properties (right click on section block- format section).

  • Issue related to the Credit memo and S.O.

    Hi,
    I have one issue related to the Credit memo and S.O.
    We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
    In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
    So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
    My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
    I mean can we create Cr memo wrt S.O when the partner functions are different?
    Pl. guide me.
    Thanks,
    Roopan.

    You have an interesting Scenario.
    You can handle this scenario in multiple ways
    1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
    2. Order related sales & credit memo.
    3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Issue related to the Excise Postings

    Issue related to the Excise Postings
    My Scenario is i have an Purchase Order with Excise Duty of 16.48%
    For Eg: Net Price(1000) + Excise Duty (16.48%) = Rs.1164.8
    my vendor gives me a Modvat of 10% i.e Rs.104.8
    but i have to pay him the total amount (i.e with excise)=Rs.1164.8
    How to do the GR with Excise & Invoice Verification??
    Wat amount will be Credited to vendor???
    How to do Excise Posting for this Scenario???
    Thanx & Regards,
    Kumar Rayudu
    Message was edited by:
            Kumar Rayudu

    Hiii Ramakrishna,,
    User doesnt know at the Time of Purchase Order that how much excise & Modvat will be getting. Only the Gross value is given in the Purchase order including all
    taxes ( No Tax Code in the Purchase Order).
    Excise Invoice and Vendor's Bill are received when the Materials are received.
    They will get the Modavat according to the Excise Invoice of the Manufacturer 
    Now while doing GR i manually give the Excise BED & Cess given in the Manufacturer Excise Invoice.
    Post the Excise Invoice before doing MIRO.
    The Problem is in the MIRO Transaction.
    At the MIRO i have selected the Tax Code with Excise.
    System is caluclating the the Excise on the PO Value i.e more than the value in the Vendor Excise Invoice (Part 1 & Part 2) and the Liablity of vendor is increased and the difference amount is posted to the material.
    Everything is going fine except the Vendor's liability and it should be value of the Purchase Order.
    How the system is caluclating the Value ???
    am i doing any wrong procedure???
    Explain me???
    Thanx & Regards.
    Kumar Rayudu

  • Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

    Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

    It is against TOU to speculate on these message board.  Suggest you post your question on the Mac Rumors site.
    As I already stated, there is no 10.6.8 update.  If there was, it would be listed in Software Update.

  • Performance issues -- related to printing

    Hi All,
    I am haviing production system performance issues related to printing. endusers are telling the printing is slow for almost printers. We are having more that 40 to 50 printers in landscape.
    As per my primary investigation I didnt find any issues in TSP01 & TSP02 tables. But I can see the table TST01 and TST03 table having many number of entries (more that lakh). I dont have idead about this table. Is ther eany thing related to this table where the print causes slowness or any other factors also makes this printing issue .. Please advice ..
    thanks in advance

    Hai,
    Check the below link...
    http://help.sap.com/saphelp_nw70/helpdata/en/c1/1cca3bdcd73743e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/fc/04ca3bb6f8c21de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/86/1ccb3b560f194ce10000000a114084/content.htm
    TemSe cannot administer objects that require more than two gigabytes of storage space, regardless of whether the objects are stored in the database or in the file system. Spool requests of a size greater than two gigabytes must therefore be split into several smaller requests.
    It is enough if you perform the regular background jobs and Temse consistency checks for the tables.
    This will help in controlling the capacity problems.
    If you change the profile parameter rspo/store_location parameter value to 'G' this will make the performance better. The disadvantages are TemSe data must be backed up and restored separately from the database using operating system tools, In the event of problems, it can be difficult to restore consistency between the data held in files and the TemSeu2019s object management in the database. Also you have take care of the Hard disk requirements because in some cases, spool data may occupy several hundred megabytes of disk storage. If you use the G option, you must ensure that enough free disk space is available for spool data.
    Regards,
    Yoganand.V

  • Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

    Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
    Before I address my issue, I'd like to point out that my rig is:
    Maximus Extreme (mobo)?
    Q6600 (cpu)
    ATI4870 (vid card)
    4Gigs of DDR3 (ram)
    and my OS is Vista Home Edition (32 bit precision)?
    And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
    Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

    ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
    Almost the same problem here.
    Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
    I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
    Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
    Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
    It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
    Ah, my headset is a Creative Fatality.

  • I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty

    I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty any more space, nor to speed up my computer? Any suggestions? All your contributions are welcomed. Thanks. Mehmet Mazhar Celikoyar

    Below is the result:
    Hardware Information:
              MacBook Pro (15-inch, Mid 2009)
              MacBook Pro - model: MacBookPro5,3
              1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
              NVIDIA GeForce 9600M GT - VRAM: 512 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              HP IO - Path: /Library/StartupItems/HP IO
    System Software:
              OS X 10.9 (13A603) - Uptime: 3 days 22:8:6
    Disk Information:
              ST9500420ASG disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (220.49 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.64)
              com.livedrive.filesystems.livedrivefs          (2.1.14)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.versioncueCS4.plist
              [loaded] com.creativebe.MainMenuHelper.plist
              [loaded] com.macpaw.CleanMyMac2.Agent.plist
              [loaded] com.magican.castle.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [failed] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist
    Launch Agents:
              [loaded] com.adobe.CS4ServiceManager.plist
              [loaded] com.hp.messagecenter.launcher.plist
              [loaded] com.hp.productresearch.plist
              [loaded] com.rim.BBLaunchAgent.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist
              [failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
              [failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
              [failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
              [failed] com.UninstallerTool.plist
              [failed] com.VolumeWatcherTool.plist
              [failed] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              BlackBerry Device Manager
              HP Scheduler
    3rd Party Preference Panes:
              Adobe Version Cue CS4
              DC30 Xact Driver Panel
              Flash Player
              Flip4Mac WMV
              Perian
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              OfficeLiveBrowserPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              OctoshapeWeb.plugin
    Bad Fonts:
              None
    Time Machine:
              Mobile backups: OFF
              Auto backup: NO
              Volumes being backed up:
                        Macintosh HD: Disk size: 499.25 GB Disk used: 278.75 GB
              Destinations:
                        TOSHIBA EXT [Local] (Last used)
                        Total size: 2 TB
                        Total number of backups: 5
                        Oldest backup: 2013-10-24 23:21:31 +0000
                        Last backup: 2013-10-25 02:59:08 +0000
                        Size of backup disk: Excellent
                                  Backup size 2 TB > (Disk size 499.25 GB X 3)
    Top Processes by CPU:
                   3%          WindowServer
                   1%          EtreCheck
                   1%          Microsoft PowerPoint
                   0%          BBLaunchAgent
                   0%          fontd
                   0%          aosnotifyd
    Top Processes by Memory:
              168 MB             Microsoft PowerPoint
              123 MB             Safari
              86 MB              Mail
              74 MB              WindowServer
              45 MB              com.apple.WebKit.Networking
              45 MB              com.apple.WebKit.WebContent
              41 MB              Finder
              41 MB              PluginProcess
              41 MB              mds_stores
              33 MB              Notes
    Virtual Memory Statistics:
              72 MB              Free RAM
              1.27 GB            Active RAM
              1.24 GB            Inactive RAM
              667 MB             Wired RAM
              2.58 GB            Page-ins
              111 MB             Page-outs

  • Communication channel parameters are not tranported in CTS+ transport

    Hi,
    My scenario is MDM to jms.
    we have configured the cts+ transport in our system.
    We transported the ESR and ID objects from development to Quality.
    But in the sender mdm communication channel the everything is getting transported except Repository password.
    when i checked in the quality system the Repository password was blank.
    And receiver jms communication channel details are in
    dev system
    IP Address or server Name:135.12.14.12
    server port                          :3321
    Queue manange name       :RRTYRKB
    channel name                  :KDIEKE.MDM
    Quality System
    IP Address or server Name:localhost
    server port                        :1414
    Queue manange name       :QM_hostname
    channel name                    :S_hostname
    i want know  whether this is  the case when we do the cts+ transport?
    if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
    Thanks.
    Regards,
    Muniyappan.

    Hi,
    >>>if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
    communication channel attrubites always get reset in the new env - TEST, PRD, etc.
    and you always need to fill them once more - this is the normal way
    otherwise - would you like to use DEV parameters on PRD system ?
    maintaining the channel attributes is a typical task on all landscapes
    Regards,
    Michal Krawczyk

  • Diffrence between File Transport and CTS+ Transport in PI

    Hi Guys,
       Can you please explain me the diffrence between File Transport and CTS+ Transport in PI.
       What are the advantages of CTS+ Transportation over FILE Transportation...
    Thanks,
    Siva...

    The file transfer will simply export the objects to a TPZ file, allowing you to import on the target system. This requires manual copying and paste of the object and have no further control.
    CTS+ on the other side, allows the environment to maintain transport requests with control over objects audit. For example, an object must be created on DEV, then after being developed it must go to QA system and will only be sent to PROD when this object was approved by the respective team on QA. For more information on CTS+, please check the help page below.
    http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm
    Also the documentation below will provide a more complete overview and configuration steps for the CTS+ usage
    "http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/application-lifecycle-management/lifecycle-management/software-logistics/new%20features%20in%20sap%20enhancement%20package%201%20for%20sap%20netweaver%207.0.pdf"
    Please also refer to the SDN thread below
    How to move PI objects in IR and ID from DEV to QAS

  • Import CTS+ transport into Portal failed with Returncode:'12'

    Hi, Gurus!
    I have encountered the problem while deploying CTS+ transport to the Portal (system XO3): Returncode:'12' class java.io.IOException:
    The file (
    \solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.par) does not exist on the filesystem.
    Full log text:
    | ######################################
    | Deployment
    | Transport request : BIGK900007
    | System : XO3
    | tp path : tp | Version and release: 372.04.71 700 
    | Deploy Service called with following parameters:
    | CommunicationData-Type:0
    | CommunicationData-Address:http://portalXO3.mycompany.com:50218
    | CommunicationData-Host:portalXO3.mycompany.com
    | CommunicationData-Port:50218
    | CommunicationData-User:'filled'
    | CommunicationData-Password:'filled'
    | Deployable(0) | Deployable-Type:0
    | Deployable-Id:
    solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par
    | Returncode:'12' | class java.io.IOException:The file (
    \solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.p
    | >>>ar) does not exist on the filesystem.
    | Deployment
    | End date and time : 20100106154329
    | Ended with return code: ===> 12 <===
    | ######################################
    The file ctsplus.par does exists at the right place and available from the Portal machine.
    Especially strange looks the Deployable-Id: *
    solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par*
    Maybe the different slashes "\" and "/" are the cause of the porblem? Both systems (Portal and Solution manager) run on Windows 2003 Servers.
    I have checked the "Note 1232674 - class java.io.IO exception during import" and set up the full control permissions to access "\sapmnt\" for the local (solman) user SAPServiceXO3 but it does not help.
    I've created a local "SAPServiceXO3" user in the server of Solman and have given to it highest permissions to the file share.  Has anybody any idea how to resolve the problem?
    Thanks in advance.
    Edited by: Mikhail Palstsianau on Jan 28, 2010 8:47 AM

    Hi,
    Due you have common trans directory for all the system ???
    Thanks
    Anil

Maybe you are looking for