Issue relating to Active Sync

Hi All,
i'am facing an issue while trying to run Active Sync.When i try opening Active Sync Wizard ,I'am getting the below error...
**Can't call method getObjectNames on class com.waveset.ui.FormUtil ==> java.lang.OutOfMemoryError: **
Please suggest where might be the problem...
Thanks & Regards,

Hi,
I have increased my heap size to 8GB ,but still getting the same error.
the error is **Can't call method getObjectNames on class com.waveset.ui.FormUtil ==> java.lang.OutOfMemoryError: **
I'am not able to find FormUtil in my war file somehow i foound the file is html file from my local war but even if i try making changes in the file i cant change the menthod getObjectNames as it is a default method...
please suggest the solution
Thanks

Similar Messages

Serious issue related to activation/deactivation and reinstall

Got a serious issue going one. I had deactivated my Premiere Pro CS6 install on my main system while I was traveling and activated the install on my laptop. When I returned, I deactivated the laptop and re-activated the main system again. Any AVCHD clips that were already there were recognized, but if I tried importing any new ones, I'd get the "Unsupported compression type" error. Realizing that this is usually an activation issue, I tried to deactivate so that I could reactivate, but the Deactivate selection was grayed out. So, I uninstalled and ran the clean up tool. Then re-installed from the Cloud and activated. I could then import new AVCHD media without the "Unsupported compression type" error, however, now the project I was working on opens, but nothing will play - neither in the Timeline or the Source Monitor. Hitting "Play" does nothing. I can move the CTI along the Timeline but the initial frame that is in the Program Monitor stays the same. Furthermore, when I try to Save, the program hangs, forcing me to end Premiere from the Task Manager.
Now, after several time opening the project, all AVCHD(.MTS) media is offline, and cannot be imported due to the "Unsupported compression type" error. I have all of the media files backed up to an external drive, so I copied some of the backed up verisons of the .MTS files over to my onboard media RAID, and still get the error. HOWEVER...when I link the offline clips to the backed up versions of the files on the external drive, they import correctly. Keep in mind, this isn't happening with all projects, only one.
Here's what I've tried as possible remedies...
- Created an empty project and imported the working project into it - same thing happens in the new project
- Created an empty project and imported individual sequences from the bad one. This works, however, one of the sequences in the bad version doesn't appear in the list of sequences when importing, providing a clue as to where the problem lies.
- Trashed preferences
- Cleaned Media Cache Database
- Deleted all Previews
I'm at an impasse. Any suggestions would be greatly appreciated.
Steve Brame
creative illusions Productions

OK...looks like the issue is settled. I tried installing PPro from the Cloud to another machine. After install I noticed that Application Manager was showing that an update was available for PPro. Hadn't gotten any other noices about that down in the status bar like I usually do, just the entry inside App Manager. So I updated the new machine. Then opened the errant project, and it seemed to be working properly, so I saved it back out with a different filename and took it back over to the main editing machine. Same issue was still there. So, I checked Application Manager on the main system, and voila, there was the update notice. So, I installed the update, and the project works like a charm now.

Cannot open up attachment larger then 10 MB on mobile devices using active sync

Our blackberry Z10/Q10 devices are trying to open up attachments larger then 10MB. When we try to open the attached files larger then 10MB on the blackberry devices, we get attachment too large by policy message. We can open up the message just fine in outlook
and in webmail.
We have spent several hours with blackberry support on the telephone and they say it is related to active sync. Exchange active sync is not stopping the device from opening attachment of any size. Our email send/receivie email limit is set to 30MB.
Blackberry is saying it is related to exchange 2010 active sync, but I am not sure where else to look as the active synch attachment policy is setup with no entry in the attachment size field. If the defautl attachment size field in active sync is not set does
it default to 10 MB?

Hi bubba1984,
I have found the KB that roopal1ra0 mentioned, it is realy good information. However it related to the Outlook client, not mobile.
"We can open up the message just fine in outlook and in webmail."
It seems there is no issue on the Outlook client and OWA. So the issue related to the ActiveSync.
Since the Active Sync is not supported on this current Forum, I suggest re-creating a new thread on the AcriveSync Forum so that we can get more professional suggestions.
For your convenience:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
However, I can also share some information for your reference:
Maximum attachment size
500 kilobytes (KB)
More details in the following article:
Understanding Exchange ActiveSync Mailbox Policies
http://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange active sync - multiple problems

I am having some serious issues with Exchange Active Sync. I just set up 2 new accounts from scratch - both using EAS. One is a gmail (for apps) account and another is a hotmail account. The google account I have set up to sync only emails and the hotmail account I set up for emails and contacts.
The gmail account is not pulling anything but the latest email in my inbox, even though I set it to "No limit" under mail days to sync.
The hotmail account is only pulling 764 contacts out of 1278 that I have on hotmail.
Both seem to be stuck in this state no matter what I do.
Any ideas? I am using iPhone 3GS with iOS 4.1.
update: just sent myself a test message and it looks like the emails got sync-ed properly. the contacts issue persists. i created a new contact on hotmail and it sync-ed just fine, but there are many contacts on hotmail that are not coming through to the phone.
Message was edited by: rpmm

I've been looking into this for about a year off and on. More recently it seems to be iPads/iPhones that are the worst. Even the latest iOS 5.x. It does seem to be people who travel a lot and/or jump on/off wireless a lot.
Deleting the device partnership does at least for a short time, resolve it in most cases.
I have a little script I run against the logs to show top user syncs. Basically, they do sync constantly all day and night up to 80,000+ hits per day on the ActiveSync frontend server (Exchange 2003), which is about every second or two. I know of a couple of people who got new phones because there battery was dying like crazy. It was just the sync problem killing them.
Anyone else have any info regarding WHEN this starts happening for a device?
It also happens with Android and Windows phones. It may be worse on iDevices for us because a lot of the people traveling have iPhones and/or iPads.

Exchange Active Sync issue - Xiaomi Redmi 4G Note or 4.4.4 Kitkat

Dear All,
We are in technical support for exchange active sync. We are getting number of calls from Redmi 4g note device users, as they are unable to configure or change their password in particular device model(Redmi
4g note, android version 4.4.4 Kitkat).
The same password is working well and good in Outlook, Webmail and other android/IOS devices.
Steps taken as of now:
User formatted the handset, flash the device and Hard/Factory reset,
Disabled the active sync service & enable again for users from exchange server,
Removed accounts from webmail.
We download some apps from play store and tried but no luck.
While configure exchange active sync in Particular model users are getting error as "User name and password incorrect".
There is no issue from exchange server and user account. as same is working fine in other devices. This issue happening for more that 10 users and receiving more calls day by day.
I request anybody to take it forward and provide the solution/suggestion, if it is a known bug for particular device model. Please confirm back.
We are waiting for someone valuable reply. Many thanks in advance.
- Senthilkumar.

Hi,
Please try run below command to double confirm the authentication of ActiveSync:
Get-ActiveSyncVirtualDirectory | FL Identity,*URL*,*Auth*
Additional, I find an blog about A script to troubleshoot issues with Exchange ActiveSync:
http://blogs.technet.com/b/exchange/archive/2012/01/31/a-script-to-troubleshoot-issues-with-exchange-activesync.aspx
Since this issue related to ActiveSync, We recommend contact Mobility and ActiveSync Team so that you can get more professional suggestion.
Please refer to:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Apple iPad 6.1.2 10B147 - Active Sync Issues Remain

Hi,
Please correct me ASAP if I am posting this in the wrong area of the discussion forum.
I have a batch of Apple iPad devices that are now connecting to our Exchange 2003 system using Apple iPad iOS 6.1.2 10B147 devices. It would seem that these devices may have the 6.1 Active Sync issue again even though this version was meant to fix the issue.
A couple of users have reported this morning reoccuring calender cancellations, we have also had excessive log growth on Exchange 2007 platform.
Here is the reported "Device Agent" from Active Sync logs:
Apple-iPad3C6/1002.147
Apple-iPad2C7/1002.147
Apple-iPad2C7/1002.147
Apple-iPad3C6/1002.147
Apple-iPad2C7/1002.147
Apple-iPad3C6/1002.147
Here is the reported Device iOS
DeviceOS
iOS 6.1.2 10B147
Does anyone know if Apple has this as a reported bug yet on their fixed version? If not is there an official Apple bug submission process that should be followed?
Regards
Ben Paddick

Hi waddock,
I think that for the most part, iOS 6.1.2 resolved the recurring calendar bug and the significant battery drain issues. With that said, I have had a couple cases of devices still experiencing the battery drain but not the calendar bug. Quick fix is to remove the Exchange mailbox(es) from the device and re-add it. If there are any existing accounts that use Exchange ActiveSync (I think Hotmail and legacy GoogleSync), I just remove and add them back to just in case.
I suggest checking here for periodic updates on what's going on with EAS (Exchange ActiveSync) and 3rd party devices like Apple:
http://support.microsoft.com/kb/2563324
I assume you're an on-premise environment, so to mitigate short-term, you may want to think about blocking certain devices on certain operating systems using your Device Access Settings in Exchange for mobile devices.
For feedback for Apple, you can do it a couple ways. This is the internet facing site:
http://www.apple.com/feedback/
Or you can create an Apple Developer account (or Apple IT program if you have an enterprise agreement with them) and start submitting feedback during your testing (i.e. beta versions of iOS):
https://developer.apple.com/
Hopefully this helps!

SAP HR Active Sync Issue

Hi,
I encountered SAP HR Active Sync issue: The IDM seems can't receive the IDOC but SAP side says the data already passed to port OK.
I enabled the verbose mode of the Active Sync logs and it is repeating:
2009-06-04T17:07:08.750+0800: IDOCs of message type HRMD_A will be processed.
2009-06-04T17:07:08.750+0800: {jco.server.gwhost=10.153.3.20, jco.server.progid=IDMRFC, jco.server.gwserv=sapgw01, jco.server.trace=1, jco.server.unicode=1}
2009-06-04T17:07:08.750+0800: Started IDocServer (IDMRFC)
2009-06-04T17:07:08.750+0800: Done initializing SAPHRActiveSync resource adapter.
2009-06-04T17:07:08.750+0800: SARunner: loop 0
2009-06-04T17:07:08.812+0800: Started, paused until Thu Jun 04 17:07:08 GMT+08:00 2009
2009-06-04T17:07:13.812+0800: Pause completed
2009-06-04T17:07:13.843+0800: Polling
2009-06-04T17:07:13.843+0800: Poll complete.
2009-06-04T17:07:13.843+0800: SARunner: loop 1
SAP side transaction WE02 shows the IDOC:
IDoc sent to SAP system or external program: Data passed to port OK
SAP HR Active Sync resource reference says:
1. Enter transaction code PFAL.
2. Insert the Object Type P for person objects.
3. Enter an Employee's ID for the Object ID or select a range of employees.
4. Click Execute.
5. Ensure that the status is set to passed to port okay.
6. The IDoc has been created. Check the Active Sync adapter log file to verify that
an update was received.
Now why I can't see the IDOC logs in the active sync adaptor log file?
Thanks!

Hi Wushilin,
Did you ever find a solution to this?
Thanks

Active Sync/lh script issue

Hi there. We've recently rolled out IdM, and we're having some issues with Active Sync handlers. Specifically, when we set a handler to start up automatically, it seems to execute every time we run a script with the lh script command.
That is to say, if we have a feed that's supposed to run at startup time, it executes when we run an lh script, then runs in the background until the lh script finishes, then dies when the script is over, which produces a number of error messages in the log.
Is this known behavior? Is there a way we can prevent lh script from starting up activesync resources? Thanks.

Hi,
Please refer to the following forum to get professional support:
Exchange Previous Versions-Mobility and ActiveSync
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobilitylegacy
Thank you for your understanding and support!
Best Regards,
Amy Wang

Active Sync Issue - Exchange 2010

Hey,
Alright I have had some issues with some iPhones connecting to our Exchange 2010 server. When i run the Testconnectivity test, I receive a timeout error on the last step:
Attempting the FolderSync command on the Exchange ActiveSync session.
The test of the FolderSync command failed.
Additional Details
Exception details:
Message: The operation has timed out
Type: System.Net.WebException
Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Tools.ExRca.Extensions.RcaHttpRequest.GetResponse()
Elapsed Time: 100439 ms.
When I run the Test from Powershell I receive the following message:
[System.Net.WebException]: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. Inner error [System.Security.authentication.AuthenticationException]: The remote certificate is invalid according
to the validation procedure.
I have already taken a number of steps including removing all of the Exchange Certificates that are not current. I have also reassigned them to the correct services. I have recreated the Active Sync Virtual Directory. Among other things.
I can't seem to find anything that points me to the correct direction so if anyone has any ideas on what I can look at, it would be appreciated.
At this point, I can't create the Exchange account on any new Active Sync clients (I have tested from an iPhone and Android phone) however a few people who had the account already setup get random e-mail messages that come through.

I turns out the issue was Trend. I uninstalled this software and everything started working correctly.

Exchange Active Sync issue - Xiaomi Redmi 4G Note or MIUI android 4.4.4

Dear All,
We are in technical support for exchange active sync. We are getting number of calls from Redmi 4g note device users, as they are unable to configure or change their password in particular device model(Redmi
4g note, android version 4.4.4 Kitkat).
The same password is working well and good in Outlook, Webmail and other android/IOS devices.
Steps taken as of now:
User formatted the handset, flash the device and Hard/Factory reset,
Disabled the active sync service & enable again for users from exchange server,
Removed accounts from webmail.
We download some apps from play store and tried but no luck.
While configure exchange active sync in Particular model users are getting error as "User name and password incorrect".
There is no issue from exchange server and user account. as same is working fine in other devices. This issue happening for more that 10 users and receiving more calls day by day.
I request anybody to take it forward and provide the solution/suggestion, if it is a known bug for particular device model. Please confirm back.
We are waiting for someone valuable reply. Many thanks in advance.
- Senthilkumar.

ActiveSync clients are developed by the device manufacturer and/or its operating system developer. I recommend you contact their technical support or find and post to a forum specific to that device.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Dealing with Changing DC's and Related USN's in AD Active Sync

We have a relatively large AD implementation (120+ DC's) and have active sync configured to failover should our primary GC detailed in the sync policy not be available. My question is: Given that each DC has its own USN counter, how do you reconcile IDM when it switches to a different DC? We've had frequent issues with switching DC's, causing active sync to either fail outright or simply go silent by not checking for changes accurately. Currently we update the USN manually on our end to reflect the new DC being used but for obvious reasons I'd like to come up with an approach that is a little more elegant.
I'm trying to put together a JMX monitor that will detect when IDM fails over to a new DC, but that is only one half of the equation. Any suggestions or best practices would be most welcome.
Thanks.

The Resources Reference talks a bit about this. Basically, you have to periodically (maybe hourly or daily) run the "Active Directory Synchronization Recovery Collector" task to keep track of the USNs on all of your domain controllers.
Then there is the "Active Directory Synchronization Failover" task that uses that info when switching to a different domain controller.
It would be really nice if these functions had just been built in to the resource adapter.

More email issues - OS 10.1.0.273 and Active Sync

I can't believe I am back on this forum with another email issue (I am also a victim of the email wipe issue. I updated my Q10 OS to .273 and now my active sync account won't connect. All other emails work fine. According to Rogers, this is a "known problem" and can be solved by using SSL/port 443 however my company uses Exchange2003 which doesn't have access through port 443.
Seeing the lengthty list of known bugs/issues on these forums, I assume a solution from Blackberry on this "known problem" is months away at best. The easy solution would be to reverse my OS update and switch back to the prior version which worked but Rogers claims this is impossible on BB10.
Before I make the dreaded decision to give my Q10 back and get an iphone or droid, can someone help with my OS rollback. Any BB techs reading this who can make the old OS available on their website?
As a side note, its mind boggling to me that BB10 has all these issues with active sync. They made a strategic decison to force non-enterprise small businesses off of BES servers into active sync - you would think they would have made sure it worked first!!! (beyond these bugs, there are basic functionality issues like the oft quoted issue of not syncing deleted folders with exchange2003 which most small businesses still use). Either they have to fix these issues fast or make some sort of free BES10 express available or they are going to lose their small business customer base. It becomes clearer everyday that BB10 just doesnt work with Exchange2003 active sync.

To the Developers,
its seems that things have gotten worse, and if you really needed someone to test your update, you could have called me...
I can't send subsequent text messages to contacts without waiting 3 minutes for the first to send.
solve this issue ASAP
Kind Regards
Nestors

Exchange 2007 Active Sync Issue with 1 users mailbox

Good Afternoon,
Server OS: Small Business Server 2008
Exchange: 2007 Standard - Update Rollup 13 SP3
Mobile phone: Blackberry Z10
We are in the process of decommissioning our Blackberry Enterprise Server, and down to one user. I am able to setup Exchange on his new non BES server tied phone, but it will not sync any email, all Meetings, and only some contacts. I have tried
adding this account to an Android phone with the same results. I have numerous times went into EMC and delete the Mobile device, when re-adding the account, everything seems to point to his exchange account being the culprit. I am getting the below
Active Sync error after adding his account. I have Bing / Googled around, and nothing of substance I have found. Thank you in advance!
Log Name: Application
Source: MSExchange ActiveSync
Date: 3/24/2015 2:01:15 PM
Event ID: 1008
Task Category: Requests
Level: Warning
Keywords: Classic
User: N/A
Computer: SISBS.internaldomain.local
Description:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356
--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ActiveSync" />
<EventID Qualifiers="32772">1008</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-24T19:01:15.000Z" />
<EventRecordID>4756229</EventRecordID>
<Channel>Application</Channel>
<Computer>SISBS.internaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356</Data>
<Data>--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---</Data>
</EventData>
</Event>

Hello,
Yes, it means the mailbox is corrupted. The most efficeint way is to rebuild the user's mailbox.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Active Sync Issue in Exchange 2003

What is the limit of concretion connection on Active sync exchange 2003 server with single front-end server and single copy mailbox cluster.

Hi,
Please refer to the following forum to get professional support:
Exchange Previous Versions-Mobility and ActiveSync
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobilitylegacy
Thank you for your understanding and support!
Best Regards,
Amy Wang

Again: BB Z10 Active Sync not syncing

Hi Everyone,
I am having problems syncing my contacts and calendat item with my Z10.
I have gone through the other related topics but none of them contained any solution.
I tried everything like security wipe, restart, delete and add gain the account etc etc.
I verified the active sync by using other devices with the server and all work just fine.
The situation is as follows:
-calendar does not sync at all
-task do not sync at all
-contacts do not sync but i am able to perform a remote search which returns the contact i am searching.
This looks as if the connection is working but the z10 does not start the process to sync the data.
Does anyone have any idea what this might be? Are there any log on the bb side which I could check?
Thanks for all assistance in advance...

Hello gwendlandt,
Thank you for your question regarding the issue you are experiencing with synchronizing Contacts and Calendar items on your BlackBerry Z10 smartphone.
In order to synchronize contacts and/or calendar via Microsoft Exchange (with Microsoft Activesync enabled) a CardDAV and/or CalDAV server must be setup by your mail provider. We suggest that you contact your mail server administrator to verify that this is the case.
Let us know if you have any other questions.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Issue relating to Active Sync

Similar Messages

Maybe you are looking for