Issue relinking after switching to Proxy Mode

So I'm 80% through a music video, and things are gettings a bit "jumpy"!
I'm told my FCPX that some frames dropped out because the hard drive was too slow, so I switched over to Proxy Mode.
Suddenly, all the clips in the event library and the timeline go red. When I try to reconnect them, nothing happens. The clips will come back if I switch back to the optimized media pref.
Is this normal? I have 11gb of ram on a 8-core mac pro... didn't have this issue until I upgraded to 10.0.3

OK, sorry to come back to this, but I'm working on another project now that has become a bit jumpy.
When I tried to transcode the media for Proxie, it tells me that I have not got enough room on my hard drive. All the project files and events are stored on the same drive which has 317gb free. The original footage file is 36.72gb...
Surly this is enough?

Similar Messages

Issue during Me53N -- switch to change mode

Hi Experts,
I use MEREQ001 to add new fields on the customer tab.
I check during the process the fields and set to required and input a.s.o.
f.e.
If sy-tcode eq ME52N or ME51N.
        IF screen-name EQ 'CI_EBANDB-ZZ_ABTL'.
          screen-input = 1.
          screen-required = 1.
        ENDIF.
Works fine except one issue.
The user starts tc me53n and click on the pencil to switch from display in change mode.
The problem now is that sy-tcode is still ME53N and I don´t if there is a field which know that I´m now in change mode.
Try to find something in SYST but I´m not sure.
These two field are changing the value during the process.
sy-modno
sy-oncom
what field should I use? Or is there a field I can use instead?
Any Ideas?
Thanks
Alex

wrong forum - sorry

IPhone not playing alert tone after switching off silent mode

Hi I have been having an issue ever since getting my iPhone 6 plus where when I take the phone off silent mode the alert tone does not play when I receive a SMS, iMessage etc. The phone vibrates but does not sound the alert tone, all other sounds work like lock sound, keyboard clicks and ring tone.
I have updated to the latest IOS 8.1.3 but the issue still seems to be happening.
I just had a chance now to troubleshoot and noticed that this has something to do with the volume control that you pull up from the bottom of the screen.
with the volume set to the minimum setting the alert tone does not play but it does play with the volume set mid-way or maximum. Depending on the volume setting depends how loud the alert tone plays.
I can reproduce the issue with these steps:
turn volume to minimum using the pull up menu at the bottom of the screen
set phone to silent using the switch on the left side of the iPhone
lock the screen
take the phone off silent mode
receive an SMS and the alert will not play.
has anyone else come across this issue? i never had this problem with my iPhone 5 and i always had the volume set to a minimum.

Hi Brenden_l,
It sounds like you are turning down the volume for alerts with the Control Center volume control, which is like turning them down with the side buttons.
Control Center - iPhone
Control Center gives you instant access to the camera, calculator, AirPlay, and other handy features. You can also adjust the brightness, lock the screen in portrait orientation, turn wireless services on or off, and turn on AirDrop. See AirDrop.
Open Control Center. Swipe up from the bottom edge of any screen (even the Lock screen).
You may want to change the Sound Setting to not have ringer and alert volume change with buttons.
Volume controls - iPhone
Lock the ringer and alert volumes. Go to Settings > Sounds and turn off “Change with Buttons.”
Take care,
Nubz

FRM-92050 error when trying to open form after switching to HTTP mode

Hi all,
Yesterday, I installed Oracle Applications 11i on Red Hat Enterprise Linux ES 4 and forms were working correctly in the default mode, which is native (socket). Following steps 4 and 5 in [Doc 201340.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6398415066875997204::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,201340.1,1,1,1,helvetica], I enabled HTTP mode, and now my forms are not working. When I open a form now, I get this error:
FRM-92050: Failed to connect to the Server: /forms/formservlet:-1
Details...
Java Exception:
java.io.IOException: Negative content-length from http://...
I've searched MetaLink and the forums for this error and all the results I found deal with HTTP headers or cookies being corrupted, usually by an intermediate networking device (web proxy, web cache, SSL accelerator, etc.). I am not using anything of the sort - the client is connecting directly to the Oracle server.
I checked the Apache error log and this is what I see:
[Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
[Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
[Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/portal/VIS_gen1-cs49/forms/formservlet
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
[Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
I don't like the look of those "client denied by server configuration" messages. What's also odd is that the two files referenced by those messages do not exist on the file system:
[oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/java
cat: /work/oracle/viscomn/java/java: No such file or directory
[oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/oracle/ewt
cat: /work/oracle/viscomn/java/oracle/ewt: No such file or directory
Any ideas? Are there any other logfiles I should be checking?

First, login to System Administrator responsibility, then navigate to Concurrent > Manager > Administer > Processes > Internal Manager LogAh, OK - I was able to open the form and I see a table of managers and services and whatnot, and I see an entry for "Internal Manager", but I don't see any way to view the log. I even tried opening the details of the "Internal Manager" entry and the only button there is "Diagnostics".
Search for VIS_*.mgr -- Sorry for the typo!Ah, that would explain it. Here are the contents of the correct logfile:
[oracle@gen1-cs49 VIS_gen1-cs49]$ cat VIS_0514.mgr
========================================================================
Starting VIS_0514@VIS Internal Concurrent Manager -- shell process ID 4314
logfile=/work/oracle/viscomn/admin/log/VIS_gen1-cs49/VIS_0514.mgr
PRINTER=noprint
mailto=oracle
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 14-MAY-2009 11:06:48 -
Shutting down Internal Concurrent Manager : 14-MAY-2009 11:06:48
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The VIS_0514@VIS internal concurrent manager has terminated with status 1 - giving up.

On Mac. Colours changed after switching to 64bit mode (ver 2.7)

Been using Lightroom 2.7 on my iMac quite happily and after reading a few articles realised it wasn't running in 64bit so changed it.
Now colours are all out, most noticeable on reds:
Before change
After Change
Any ideas why this is happening?
Tried changing back to 32bit and still the same so something has changed.
Thanks
Andrew
P.S Posted this on another forum and just to clarify here also, whilst the above are exported jpegs, these are used purely for illustration. The colour change is happening within lightroom itself, not on export.

After some advice elsewhere it seems I have 'lost' some of the camera calibration profiles.
I only have ACR3.1 and ACR4.4 listed and checked on another machine I used I normally have it set to Adobe Standard.
So, how can I get the profiles back?
OK. Problem solved. Reinstalled Lightroom.
Usually fixes things

In FCPX 10.1.2 how do you edit in proxy mode...and after you are done editing in proxy mode, how do you switch back to original media? I had no problems with old version but complicated with newer version.

In old version of FCPX I could easily edit in proxy mode which i found to be a quicker way of editing...all i did was goto preferences and click on playback tab and change it from original media to proxy...and i could go right into editing, and when i was finished before i would export my project i would switch back to original media...then i would export my project. Now i'm having a hard time accomplishing this on the newer version fcpx 10.1.2. Somebody please help me....thanks in advance!!!

Click the triangle at the top right of the viewer and choose proxy or optimized/original as appropriate.

I915 power consumption issue after switch to systemd?

After switching to systemd I noticed a massive increase of power consumption on my Thinkpad X220 (i5 Sandy Bridge).
The strange thing is, that after some reboots it randomly seems to catch the i915 power saving mode and the consumption gets from ~24W to ~7W at idle. But only after several reboots.
Adding the good old i915.i915_enable_rc6=1 to the boot parameters doesn't make any differences. But looking at the powertop detail outputs it seems to be a i915 issue.
Using the latest linux kernel from core (3.6.4) and latest intel drivers (2.20.12).

I started to get suspicious because I have only ever had the issue in my office. Last week, when I encrypted my drive, my machine wrote to disk for more than 14 hours solid. I then did all the set up and all the restoring from backup etc. with no issue whatsoever. Lenovo ran the thing for 48 hours straight with no problem. But once in my office...
So I asked the local IT people if they could think of anything other than overheating and explained the issue. They took my laptop yesterday , booted it from a hardware testing CD and ran it for a couple of hours sitting on top of a hot computer in the server room which is definitely hot. (It has a whole bunch of computers, I guess.) No issue. They then ran stress tests for a while in the same place. No problem. Highest recorded temp: 65C.
The head of IT then took my power adapter to a more general IT service to be tested and inspected. They looked at it, they opened the plug to check the fuse, they tested it. No problem. Of course, the guy also explained why he was asking and the other IT person said, "Oh, is that on level 1?" "Yes..." So apparently there was another machine (a Mac), I think, doing just the same thing in an office in my part of the building. Testing showed that the power spikes and when the power spikes, the laptop shut down as a safety measure. Solution: they installed a UPS for that one laptop. They didn't tell anybody else, including the local IT people.
What the local IT people were going to do was to install equipment to monitor the power in my office and see if anything weird was causing my laptop to react. However, that was when this was an extremely-unlikely-but-we-are-getting-desperate-for-theories scenario. Clearly, that theory no longer seems wildly implausible at all. So the current hypothesis is that it is most likely that my machine is also reacting to the spikes in power by shutting itself off. (I'm not sure why it should have just started doing this but who knows what the state of the electricals is and how that might vary?)
I have been told that a surge protector will do no good. (They've given me one anyway but apparently it will not deal with spikes in phase 3 power or something - I didn't understand this bit but the head IT person said he didn't understand it either but the electricals IT person showed him with graphs on the whiteboard. So it must be true.)
The current plan is to try to get the UPS from central IT which was provided for the other laptop since that person's discipline has since moved to another floor of the building so the UPS probably went back to central IT. They are going to ask during a meeting tomorrow about this possibility. Otherwise, they are planning to order a UPS for me on Monday.
I'm somewhat surprised that the abrupt shutdowns haven't screwed my data. I've lost work but not seen fs corruption. I didn't take my laptop today. I'll need it next week but I do not plan to plug it in in my office until I have a UPS.
I'm pretty annoyed, to be honest. I've wasted hours on this and got incredibly stressed about it. The IT people have also wasted a (smaller) amount of time. I hoped to have a new draft of an article I'm working on written by the end of reading week but that didn't happen due to all of this. And they *knew*. It would be different if this was an unknown problem just discovered - of course, one could understand that. But there's a known problem which can cause this type of problem and presumably could well damage equipment without these sorts of safety shutdown features and they don't tell anybody.
And, no, I doubt very much indeed that a damaged personal machine would be considered the institution's liability. (Maybe if it was a student's machine and the student was required to use it or something but even then...)
I can't believe it does much good to their equipment either.
The local IT people did know there was an issue with some burnt out devices but that was about eight years ago and only got mentioned as a outside possibility when other diagnostics turned up no result.
What gets me is that the proposed solution will only solve the issue for me - not for anybody else in my part of the building on level 1.

Sound issue after switch off HDMI divice

I have installed video card and plug it to TV through HDMI divice, after switching off my TV i have no sound. message that no out put divice is installed.

Hi,
For the issue, please check your Sound setting.
Firstly, let us unplug the HDMI Device.
Meanwhile, please open Control Panel>Sound:
Please check your default sound device to see if it remains use HDMI.
In addition, let us use the Audio troubleshooter, it can diagnose and fix common sound playback and hardware problems.
http://go.microsoft.com/fwlink/?LinkId=260596
Keep post.
Regard,
Kelvin hsu
TechNet Community Support

Offline or Online Backup after switching off and on the archving mode

Hello guys,
I am doing an SAP (on Oracle) upgrade. In the upgrade guide there are two completely different statements about making a backup of the Oracle database during upgrade.
1st statement:
"If you deactivate archiving, you have to make a full backup of the database after the downtime before you switch archiving back on. This must be executed as an offline backup."
2nd statement:
"Backup: Database Was Operated in NOARCHIVELOG Mode
Activate ARCHIVELOG mode again and create a full backup of the database. This must be executed as an offline backup."
Quotes from: "Upgrade GuideSAP ERP 6.0 Including Enhancement Package 4 Support Release 1 ABAPBased on SAP NetWeaver 7.0 Including Enhancement Package"
I understand the fact that the backup has to be offline if you do it before you activate archiving. This is logical.
1) Why does SAP do these two proposals before and after switching on archiving which are completely contrary?
2) Why does the backup has to be offline if you do it after switching on archiving?
May be somebody knows the background for this.
Thanks
Nik

Hi,
Two kind of Recovery play an important role in Database Recovery after DB Restore. The Database recovery can be Compete recovery, point-in-time recovery or partial recovery.
Media Recovery (due to media failure/corruption or loss of Data files) can be performed by applying all Offline Redo Log files which are generated from Online Redo-log file in Archive Mode.
Instance Recovery can be done with the help of Online Redo log file and undo table-space to achieve consistent status of Database. In this recovery the committed transactions (which are logged in Online Redo Log files) are roll forward and the uncomplete transactions (which are also logged in Online Redo Log Files) are rolled back into DB using Undo space info.
If you deactivate archiving, you have to make a full backup of the database after
the downtime before you switch archiving back on. This must be executed as an offline backup.
                   With Archive log Mode , one can deal with Media Recovery and Instance Recovery. Upon deactivating Archive log mode, the Archive log files will not be generated and the circular logging will take place within the group of online redo log files.
                   So, after deactivating Archive Log mode, Its recommended to take immediate offline backup to have consistent Backup copy of Database which may be required to deal with demanded media recovery by restoring that immediate latest offline Backup. If the database operates in NOARCHIVELOG mode, the database can ONLY be completely recovered from instance failure but not from media failure. This means that, in case of media failure you will lose all work done after the last valid offline backup. The database can be backed up only while it is completely closed.
                   Upon media failure after deactivating the Archive log mode (..rare chance, but we can not ignore it...),the complete recovery can not be achieved if the large time gape is there between the last successful offline backup and DB crash because between this time it may be the chance that the Online Redo log files are overwritten so many times in circular manner.

Network issues after returning from sleep mode

I'm noticing this issue on T440, Twists, T420s, whether it's Windows 8, Windows 8.1 or Windows 7. Sometime around the end of last year and the beginning of this year, my users suddenly started reporting problems with the machines after returning from sleep mode. The network adapter (whether plugged in or using wifi), would show limited connectivity and would not connect to the internet until the machine is rebooted.
I've tried updating drivers, using system restores, disabling the network adapters from shutting down to conserve power, OS network diagnosis & network adapter resets, none of which has worked. Hibernation is disabled on all machines.
The only fix I have is to reinstall the OS over the top of the system and reinstall all updates. Looking for help with this issue.
Thanks!
Solved!
Go to Solution.

Hi Mertz74,
Thank you for replying us back!
Please check with uninstalling power manger and reinstall it with latest driver.
Download chipset driver from Lenovo drivers page and install it.
Please check with above option to resolve the issue.
Below is the link to enter the downloads page and download updates accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps. Do post back if issue persists!
Best regards.
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Some issues after switching from 686 to x86_64

Hi all,
after switching from i686 to x86_64 using this link I am now facing some minor issues with some packages. I already activated the multilib repository but some problems remain. I checked the binaries in /usr/bin for 32 bit executables as described in the above link and there are 177 "bad" binaries left. I thought all of these were not executable, but surprisingly wine was. Strange!
ffmpeg is another 32 bit executable and not runnable. So I tried to reinstall it, but that failed:
> pacman -S ffmpeg
warning: ffmpeg-1:2.6.1-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg-compat: requires libx264.so=144-32
libx264 is installed and didn't want to be reinstalled either:
> pacman -S libx264
warning: libx264-2:144.20150223-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg: requires libx264.so=144-32
:: ffmpeg-compat: requires libx264.so=144-32
Can someone give me a hint, what's the best way to solve this problem?
Thanks in advance, Zmann

I think the first issue you will run in to is that the interface for an old P4 hdd will probably not be the same as a new computer. Besides that, it will probably be vastly slower than what comes with a new computer. I think that is not the best idea.
The only wat to really "trasition" between two archtectures that I know of is to copy configuration files over and have pacman dump a list of explicitly installed packages from the main repos. Then use that information to reinstall all those packages.

Dropped Frames consider using proxy mode

The message:
Many video frames were dropped during the last playback.
The disk does not appear to be fast enough.
Consider using proxy mode
I am resonably new to FCP X so I cant tell whether this is new (after update) or if its a known problem and how to solve it. I have seen a couple of other posts that suggest its new.
iMac
Core i5
2.7GHz
8GB RAM
Snow Leopard

This is my pet checklist for questions regarding FCP X performance.
FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB.
First, check that you have at least 20% free space on the Hard Drive that your System and your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
If you are short of drive space, use ProRes 422 Proxy - but remember to select High Quality when you export your movie.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

I'm stuck in proxy mode, how can I get out?

I seem to be be stuck in proxy mode. Even with a new library and a new clip, it shows a 'missing proxy' label. I can't switch to 'optimized/original media'. FCPX simply doesn't do it. I already tried trashing prefs and reinstalling FCPX. please help?
Arnoud Kwant
The Netherlands

What exactly happens when you try to switch by selecting Original/Optimized as in Alchroma's image? Does it still show Proxy as selected?
You may also try Window->Revert to Original Layout.
If reinstalling, it is recommended that you use FCS Remover to make sure that all traces of the application are deleted. And then you'd need to download a fresh copy from the App Store, and also download the additional content from inside the application.
It stays on Proxy. That is the issue.
Revert to original layout didn't help.
I uninstalled using AppCleaner. I deleted all files (except the 1Gb of additional content)
(BTW thanks for Luis and Alchroma for trying to help)

Can not switch from organizer mode to editor mode in adobe premiere elements 12.

After successfully installing and registering my new adobe premiere elements 12 and had created the organizer, I still can't switch from organizer mode to editor mode to edit a file (photo).

Alfredo Agorilla
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so.
You wrote
I still can't switch from organizer mode to editor mode to edit a file (photo).
Just how are you trying to do that...
a. Are you in the Elements Organizer 12 workspace, right clicking the photo's thumbnail, and selecting Edit with Premiere Elements Editor
or
b. Something else.
Is there an error message that results when you try to switch "from organizer mode to editor mode" and cannot?
When you mention "....to edit a file (photo)", I wonder if you are not trying to get to Photoshop Elements 12 Editor, not Premiere Elements 12 Editor, from the Elements Organizer 12.
Please supply a step by step of what you are doing so that we can be sure that we are in sync on the details that we are using to work through your issue.
Thank you.
ATR

Bootup switched to interrupt mode ???

I have been using Archlinux for a while without problems, however today when I started the machine it seemed to freeze (blank screen rather than the bootup info) If I press the power key it then continues with normal bootup text displayed. Then at a few times i have to press <ENTER> to get the steps to continue?
The boot log reads :
acpi: EC: non-query interrupt received, switching to interrupt mode
just as it stops for the first time, after pressing <POWER> it moves on
another note: when boot gets to Starting Hardware Abstraction Layer it displays [Busy]. If I press <ENTER> it then moves on again.
What seems to be wrong?
thanks
Last edited by glenn69 (2008-08-19 15:32:28)

I have the same issue! http://bbs.archlinux.org/viewtopic.php?id=53521

Issue relinking after switching to Proxy Mode

Similar Messages

Maybe you are looking for