Issue Saving Between Multiple Systems

Hi all, perhaps this has been answered before, but I'm not having much luck with my phrasing in order to find it, if so.
I work in a multi-station editing setup on a university campus, with three separate Mac systems sharing projects and footage/elements on a Titanium system from Small-Tree.
We've recently made the switch over from FCP 7 to Premiere CS6. We've also upgraded one of our systems to a new iMac running 10.9.1 (3.2 Ghz Intel Core i5, with 16 GB DDR3) . The system I'm on, as well as a third, older, MacPro are both running OSX 10.6.8.
Our problem comes from whenever we attempt to save projects. When I create a project, it will allow me to save with no problem. However, when we open the project on the newer system, clicking save gives an unknown error message, suggesting that we select 'Save As' and give it a different name. So, "Student Involvement.prproj" has to become "Student Involvement VER2.prproj".
On the inverse, whenever I then go onto *my* system to open the "VER2" edition of the project, I can no longer save this new version, and must 'Save As' the original project.
I don't know if this is a problem with Premiere itself, or with Premiere working on two different operating systems between iMacs, or if it's a problem with how the new system is connected to the Titanium, etc. I've asked this very question to the folks at Small-Tree, just to make sure, but I wanted to fly it past everyone here to see if anyone might be aware of any workflow or compatibility issues that would apply.
Thanks so much,
-Kody Kiser
University of Kentucky PR & Marketing

Generally speaking, outside of the not-so-cheap Adobe Anywhere, PP doesn't always play nice with networks. The recommendation is to keep everything local. Use networks only for backup and transfer, but move everything to a local drive before working with it.

Similar Messages

Any improvements in sharing an iPhoto Library between multiple users?

It is possible and Apple Approved to share an iPhoto Library between multiple users, but the Library must be stored on a drive or disk image that ignores permissions:
http://tech.kateva.org/2008/10/apple-supports-multi-user-iphoto.html
This doesn't work for me. Has Apple changed anything with iLife '09 to make it easier to share a Library? For example, have they changed from the prior Package format?
Message was edited by: jfaughnan

Alternatives to a trip to the Terminal:
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. The problem here is that OS X works very hard to keep your data safe and secure from the other users. You're trying to beat what's built in to the system. So, to beat the system
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a Disk Image or even partition your Hard Disk.
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Lastly: This method seems a little clunky at first, but works very well. Most importantly, it uses the System to do the job for you.
Create a new Account on your Mac, call it Media. Create an iPhoto Library there. (BTW: This will work for iTunes too.)
Enable Sharing on the Library:(Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other accounts. In those accounts, enable 'Look For Shared Libraries'. The Library will appear in the other source pane.
This means that both users will be able to see the pics. If you want to use a pic then simply drag it from the shared Library to your own in the iPhoto Window. This means that each user can have their own edits.
If you want to add photos to the Library: Log into the Media account for that purpose.
To make it all seamless: Set your Mac to log into the Media Account automatically. Set iPhoto to launch on log-in. Then switch to your own account using Fast User Switching.
Net result: a Library that's permanently available to all users but also protected. Each user can have their own versions of the pics if they want.
No partitioning, no permissions issues. Uses no extra disk space. What's not to like?
Regards
TD

Fiori: incorrect alias used when multiple system aliases assigned

Hello all and Masayuki Sekihara
I'm implementing SAP Fiori PO/PR/Contract approval.
There is only 1 gateway system currently in order to support 4 ECC systems.
(Sandbox, development, quality and production)
Everything is working correctly when assigning only one (Sandbox) SAP system alias to the gateway service of PO approval for example.
However when we assign multiple system aliases and set the sandbox system alias as default things go wrong.
(Currently IW_BEP is not yet installed on the development; Quality and productive system)
And we noticed the service is resulting in an error message because these BEP function modules can not be found on the target system.
However the issue is that it should not call these systems as we have flagged Sandbox system as default.
Anyone has an idea or note for this?
(We temporary fixed this by assigning only a single alias to the services).
But in a later phase we want to add all in order to be able to test on all systems and run production as default.
Thanks for your help.

I don't want to use the MOC.
I want the behaviour like mentioned in the note:
The default system is used whenever the service is not called as MOC. If you have defined more than one default system alias, the first system is used as the default.
How can I achieve this?
According to my understanding now I should make sure ";m"o is not added to the URL, but how can this be achieved?
Thanks!

Running JMS Client Programs on Multiple Systems?

Has anyone gotten JMS to work on Multiple Systems
using Windows 2000 on both systems? The JMS Tutorial
doesn't seem to work for me even if I repeat the steps
over an over again (maybe it's incorrect)?
Well, anyway, what I'd really like to do is to run
JMS between different systems using tcp/ip. Is this
possible?

Hey There,
Same thing happens to me. Since your message and others went unanswered, I am being to think this is a dirty little secret.

RAR - SU24 Config Updates - Multiple Systems

I was in the process of updating the SU24 data within RAR and was wondering how GRC differentiates between a transaction that exists in multiple systems. Typically only technical transactions would exist across systems, but this may not always be the case.
I can't say with 100% certainty that a tcd that exists across systems will be maintained with the same SU24 data. Nor can I say that it "ALWAYS" should have the same SU24 data.
When you upload the SU24 data from multiple systems and the same tcd/auth object/auth values exist, will the values be overwritten as you upload the text files for each system? I'm assuming yes? If this is the case, you would have to be cautious to the order in which you upload the text files per system.
We use SRM, BI, PI, and ECC. Any comments would be appreciated.
Thanks,
Rich

yes the text files do not have the SID but when you upload those files in RAR you specify for which system you are uploding it. By selecting the system from drop down you tell GRC for which system the SU24 data is for.
Thank you,
Partha

Sharing custom display profiles between multiple users

Hello,
I'm brand new to Mountain Lion and I can't figure out how to share a custom display profile between multiple users on the same MBP. I'm a photographer and I have two users set up on my laptop - one personal and one for shooting. I'm using a Color Munki to calibrate my external monitor and the software creates a profile.
Previously, I could go into my library, copy the profile and drag it into the colorsync folder for my other user, then switch to my other user and find that profile in system preferences/displays.
I have no idea how to do this in Mountain Lion.

Let me simplify this by refering to User A and User B to represent the two separate users I've created on my MBP.
I've done some more digging and here's what I've found: In the Color Sync utility for User A my custom profile is in a user folder, represented by the name I gave the file when the profile was created. That's no problem
When I switch to the User B, there are two profiles in the Color Sync Utility named "Display". The "Display" file was created at the same time my custom profile was created, however, the file names don't match and I don't know why there are two of them.
I'm fairly certain that "Display" profile is the custom profile I want to use, but there's a problem coming down the road: what's going to happen when I profile my monitor again in 3 weeks.

Trying to Sync Multiple Systems

I am having great difficulty with iSync across multliple systems. I will admit that this may be due to my own misconception about what sync is suppose to be so let me explain what I have, what I think should happen then what is happening:
Work Setup: 1 laptop
Home Setup: 1 laptop, 1 desktop
iPhone: of course ...
Having multiple systems is great. A corporate mac laptop keeps me on the move in the office, my private laptop provides me mobility out of the office and my home desktop is where I do most of my work while home. The home desktop has a couple web pages on it, so it is up 24x7. The two laptops come up for periods of time the go down.
Understanding: Turn on sync, settings to automatic, and when I make a change on any one of the systems, it gets immediately pushed to the cloud, to my phone, then back down to the other 2 systems I am not currently on.
Reality: every system fights for superiority over every other system. Every time one of the systems sync, it completely messes everything up. Here is a great example. Friday before leaving the office I created a Group calendar called "Work Group". I placed a couple existing calendars under this group and made a couple new ones. It appeared to sync to my phone OK so I believed all was well. When I got home I discovered that the desktop (which is on 24x7) had not updated based on the information obviously pushed to the cloud by my office machine (I say obviously because it did make it to my phone). When the synchronization did appear on the desktop, 2 of the work Calendars were moved into a new Group called "Group". When I checked on the cloud by logging into my mobile me account - I couldn't even recognize the format the calendars were online. Having to have brought my work laptop home for the weekend I looked at it and WTH? The calendars on that machine looked exactly like the calendars on my desktop before it did a partial sync. Now the work laptop fired a sync and it warned that there were numerous conflicts that had to be manually resloved. Surprise surprise, same thing on the desktop.
It would seem to me a simple thing to flag records that hand changed and Synchronize only those records updating the cloud. But, it appears that the entire calendar database is being pushed by every machine every time it synchronizes. So it is a push more than a sync. This is quite infuriating.
I find it hard to believe that Apple could have made such an egregious error in programming logic so I can only come to two possible conclusions. (A) My expectations and configuration settings are incorrect or (B) Apple is hiring Microsoft employees. God oh God please let it be (A).
Can someone provide insight?

iSync is only for syncing Contacts and Calendars to non-Apple mobile phones via a local USB or Bluetooth connection.
http://www.apple.com/macosx/features/isync/index.html
iSync does not sync anything between Macs, the iPhone, or to the MobileMe 'cloud'.
(The only connection iSync has with the above, is providing a UI to turn on system-wide syncing and to reset it.)
Rather than iSync, what you are using is MobileMe Sync, and the forum for that is here:
http://discussions.apple.com/forum.jspa?forumID=957
How you expect the syncing between multiple Macs and your iPhone is exactly how it should be working, and is designed to work. So something in your particular setup is not right.
I'd suggest posting in the above linked forum where all the MobileMe Sync gurus should be able to help.

HT202450 If the issue is reported multiple times, is it still covered?

If the issue is reported multiple times, is it still covered?

Security Software and Related Troubles
http://support.apple.com/kb/TS3125          Basic Troubleshooting
http://support.apple.com/kb/TS3297          Advance Troubleshooting
http://support.apple.com/kb/ts1629          Ports List
Basics
Check correct date, time, and timezone.
Log in as administrative user account
Verifiy iTunes updated
Update Operating System “OS” (Ms Windows, Mac OSX)
Update Modem / Router firmware
Update security software (Antivirus, Firewall)
Remove Outdated Security Software (Always restart afterwards)
Advanced
Remove Mobile Software not used anymore
(Motorola, Android, Nokia, Sony, Blackberry)
Add Apple programs to firewall permissions
Allow Ports 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999
Permit Domains - apple.com , edgesuite.net , mzstatic.com
Disable Security Software
Remove Security Software (restart!)
Delete “Hosts” file and restart, or edit and save.
Check Browser Settings: Use SSL3, TLS1, Auto Detect, No Proxy Settings
Reinstall itunes FOLLOWING ARTICLE while all security off / disabled or completely removed.
http://support.apple.com/kb/HT1923
http://support.apple.com/kb/HT1925

Is there a dependency between source system patch level (IS-U) and BW 7.3

Hello everybody,
we think about upgrading our BW. Now there is the question if there is any dependency between source system patch level (IS-U) and BW 7.3.
Perhaps someone knows a note. I don't find anything.
Thanks

Hello Ingo,
we have also a Problem with the SSO between BOE Server and our BW Portal. Our Systems are in different Domains and we make all settings in BW as described in the SAP Documentation "http://help.sap.com/saphelp_nw04/helpdata/en/a0/88a340fa432b54e10000000a1550b0/frameset.htm"
but now we didn´t know what we have to to on BOE side to install the SAPSSOEXT and to get the corret UME Proberties that we have to put into BW.
Can you help us please on that issue? We can´t find any BOE Documentation for that and we working on that issue now for more then 5 weeks.
Thank you/Kind Regards
Evelyn

How to manage data aggrigation from multiple systems.

Hi,
How to manage data aggrigaion from multiple system which should support paging too.
please suggest me , best possible soluntion.
Thank You

what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

Switching between multiple input languages.

I use English, Korean and Google Japanese. I used to use Windows with the same set of languages and it was even more difficult than in OS X, because each IME may have multiple languages (for example, Korean IME has both Korean and English mode). Now in OS X it is better than Windows because each IME has only single language, but still there are some troubles.
I use long command + shift. It shows the list in the middle of the screen, but the order is change depending on the current IME. And it only has text, no flag icon, so it is difficult to get the IME I want without carefully watching the screen.
It looks like OS X does not support assinging a shortcut for each langauge. For example, if I could assign F1 for English, F2 for Korean and F3 for Japanese it would be much easier. Or if only the popup language screen had flag icons...
Is there any third-party app that helps switching between multiple IMEs?

If you stop holding down the keys so long, the list should not appear. Instead, use the flag icons at the top right of the screen to tell which keyboard is active. If you don't see those icons, go to system prefs/language & text/input sources and check the box for Show Input Menu in Menu Bar.
I don't know of any way to use keyboard shortcuts in general for this, but the app Nisus Writer has preference settings that let you set that up for that app.

Sorting between multiple arrays.

I thought that I had posted this yesterday; however as I can not find my post...
I need assistance with part of a project where I need to sort between multiple arrays; using one of the columns as the sort criteria. The arrays contain integers, strings, and doubles; however I would like to sort and display the arrays alphabetically using the string column. I was told that a bubble array may work, however as I can not find specific information on the use of a bubble array, I really don't know where to start. The arrays look like the following:
productArray[0] = new Product(1, "binder ", 15, 1.5, 0, 0);
productArray[1] = new Product(2, "marker ", 13, .5, 0, 0);
productArray[2] = new Product(3, "paper ", 24, .95, 0, 0);
productArray[3] = new Product(4, "pen ", 5, .25, 0, 0); \
Any assistance that anyone could provide would be greatly appreciated. I am a newbie when it comes to Java and the course materials are extremely vague.
Dman

Thank you for your assistance.
The site that I found to be most helpful was the http://www.onjava.com/lpt/a/3286 site; however I am still experiencing problems. I have added code to the program as noted below:
public class Inventoryprogrampart3
/** Creates a new instance of Main */
* @param args the command line arguments
public static void main(String[] args)
// create Scanner to obtain input from command window
java.util.Scanner input = new java.util.Scanner( System.in );
double totalInventoryValue = 0;
NumberFormat nf = NumberFormat.getCurrencyInstance();
System.out.println(); // Displays a blank line
System.out.println( " Welcome to the Inventory Program - Part 2 " ); // Display the string
System.out.println( " ----------------------------------------- " ); // displays a line of characters
System.out.println(); // Displays a blank line
System.out.println( "This program will output an office supply inventory" ); // Display the string
System.out.println( "listing that includes item numbers for the" ); // Display the string.
System.out.println( "inventoried products, the items product names, the" ); // Display the string.
System.out.println( "quantity of each product in stock, the unit price" ); // Display the string
System.out.println( "for each product, the total value of each products" ); // Display the string
System.out.println( "inventory, and a total value of the entire inventory." ); // Display the string
System.out.println(); // Displays a blank line
System.out.println( "*****************************************************" ); // Displays a line of characters
System.out.println(); // Displays a blank line
Product[] productArray = new Product[ 7 ]; // creates 7 product arrays
// adds data to the 7 arrays
productArray[0] = new Product();
productArray[0].setitemNumber(1);
productArray[0].setproductName ( "binder" );
productArray[0].setitemQuantity(15);
productArray[0].setitemPrice(1.5);
productArray[0].setinventoryValue(0);
productArray[1] = new Product();
productArray[1].setitemNumber(2);
productArray[1].setproductName( "paper" );
productArray[1].setitemQuantity(24);
productArray[1].setitemPrice(.95);
productArray[1].setinventoryValue(0);
productArray[2] = new Product();
productArray[2].setitemNumber(4);
productArray[2].setproductName( "pen" );
productArray[2].setitemQuantity(5);
productArray[2].setitemPrice(.25);
productArray[2].setinventoryValue(0);
productArray[3] = new Product();
productArray[3].setitemNumber(3);
productArray[3].setproductName( "marker" );
productArray[3].setitemQuantity(13);
productArray[3].setitemPrice(.5);
productArray[3].setinventoryValue(0);
productArray[4] = new Product();
productArray[4].setitemNumber(5);
productArray[4].setproductName( "pencil" );
productArray[4].setitemQuantity(28);
productArray[4].setitemPrice(.4);
productArray[4].setinventoryValue(0);
productArray[5] = new Product();
productArray[5].setitemNumber(7);
productArray[5].setproductName( "tape" );
productArray[5].setitemQuantity(14);
productArray[5].setitemPrice(1.65);
productArray[5].setinventoryValue(0);
productArray[6] = new Product();
productArray[6].setitemNumber(6);
productArray[6].setproductName( "staples" );
productArray[6].setitemQuantity(13);
productArray[6].setitemPrice(1.25);
productArray[6].setinventoryValue(0);
System.out.println( "Inventory listing prior to sorting by product name:" );
System.out.println(); // Displays a blank line
System.out.println( "Item #"+"\t"+"Product Name"+"\t"+"Stock"+"\t"+"Price"+"\t"+"Total Value"); // Displays a header line for the inventory array display
System.out.println(); // Displays a blank line
System.out.println( "-----------------------------------------------------" ); // Displays a line of characters
System.out.println(); // Displays a blank line
for (int i=0; i<=6; i++)
Product products = productArray;
String productName = products.getproductName();
int itemNumber = products.getitemNumber();
int itemQuantity = products.getitemQuantity();
double itemPrice = products.getitemPrice();
double inventoryValue = products.getinventoryValue();
System.out.println( productArray[i].getitemNumber() +"\t"+ productArray[i].getproductName() +"\t"+"\t" + productArray[i].getitemQuantity() +"\t"+ nf.format(productArray[i].getitemPrice()) +"\t"+ nf.format(productArray[i].getinventoryValue()) );
Arrays.sort(productArray);
System.out.println( "-----------------------------------------------------" ); // Displays a line of characters
System.out.println(); // Displays a blank line
System.out.println( "Inventory listing after being sorted by product name:" );
System.out.println(); // Displays a blank line
System.out.println( "Item #"+"\t"+"Product Name"+"\t"+"Stock"+"\t"+"Price"+"\t"+"Total Value"); // Displays a header line for the inventory array display
System.out.println(); // Displays a blank line
System.out.println( "-----------------------------------------------------" ); // Displays a line of characters
for(int i=0; i <= 6; i++)
totalInventoryValue = totalInventoryValue + productArray[i].getinventoryValue(); // calculates the total value of the entire products inventory
System.out.println( productArray[i].getitemNumber() +"\t"+ productArray[i].getproductName() +"\t"+"\t"+ productArray[i].getitemQuantity() +"\t"+ nf.format(productArray[i].getitemPrice()) +"\t"+ nf.format(productArray[i].getinventoryValue()) );
}// end for
System.out.println(); // Displays a blank line
System.out.println( "The total value of the entire inventory is: " + nf.format(totalInventoryValue) ); // Displays the entire inventory value
System.out.println(); // Displays a blank line
System.out.println( "*****************************************************" ); // Displays a line of characters
} // end public static void main
}// end public class Inventoryprogrampart3 main
The following utilities have been set:
import java.io.*;
import java.text.*;
import java.util.Scanner;
import java.util.*;
import java.util.Arrays;
import java.util.ArrayList;
import java.util.Comparator;
The program compiles, however when I try to run the program I receive the following error (which outputs about 1/2 way through the program:
Exception in thread "main" java.lang.ClassCastException: Product can not be cast to java language comparable.
(along with a listing of other errors - I can't even get my cut and paste to work on my command prompt window).
I've tried about 50 different iterations and nothing seems to work.

Decision between multiple alternatives process type

Hi All,
I want to use this process type "decision between multiple alternatives" in one of my process chains, but i want use this process type if the DELTA infopackage pulls ZERO records, skip the next process and more than ZERO records continue the process.
Please suggest me is it possible anyway.
Thanks a lot in advance.
Regards,
Ravi Kanth

Hi,
You can't do it with Decision type process as the conditions allowed are standard System conditions. As Suggested above, you need a code before that. The logic can be sketched as :
1. Load the provider.
2. Obtain the latest request in the provider.
3. Get the data from the request (std SAP prog is available for reading from providers).
4. Raise error upon getting no data (in this case you need to put the steps to be skipped in another chain and use in the main chain as meta chain).
--Akashdeep

Decision between multiple alternatives -question

Hello all,
I have some doubts about process Decision between Multiple Alternatives, from RSPC transaction.
The problem is like this:
1. I have one main process chain.
2. I have the process decision between multiple alternatives, in this main chain, after start.
I choosed formula and I put an if (as in the code below). Then I put the WORKINGDAY_MONTH
In it I want to test to have the 19-th working day of the current month , factory calender ' 01'.
If I have this day I want , I want to raise an event.
IF( WORKINGDAY_MONTH( Current Date, '01', '' ) = 19, 'ZEVENT_WD', 'ZEVENT_ERROR' )
This event would be usefull so I can start with it a second chain(inserted in the main chain).
The system says (when I check my formula) that it is sintactically correct, but incomplete.
Any clues why this message apears ?
I don't know if it is ok to put the events like that in my IF (one to start the subchain and one as error).
Thank you a lot.

Hi,
The decision process type allows you to determine a set of conditions
For more info go though the below link , as they have explained step by step with screenshots
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301fb325-9d90-2c10-7199-89fc7b5a17b9&overridelayout=true
Regards,
Marasa.

Not able to fetch workitem from Multiple system ( version 4.6c ) in POWL Configuration

Hi Experts,
i am configuring SAP POWL in my EHP 6 System and i am able to get work-items from same system but i am not able to get from multiple system which version is 4.6c.below steps are already done.
1.Create RFC Destination ( destination working fine )
2.in SPRO,Cross-Application Components ->Processes and Tools for Enterprise Applications -> Inbox -> Assign Connected Back-End Systems to Inbox
Added Destination for Old system 4.6c
3.Create Exception Entry for that
4.Business function FND_IBO_MULTIBE_1 activated
5.Assigned below roles to respective users
SAP_BC_BMT_WFM_INB_API_END_USR
SAP_BC_BMT_WFM_INB_API_SRV_USR
6.Added respective Task IDs in SPRO -> inbox- >Assign Task IDs to POWL Types
Please help if i any config are missing.
Regards,
Pramod Gupta.

Hi Siddharth Rajora,
Thanks will that,but as you said 4.6c is not supported you have any document where its mention like that.so we can show our client and close this issue please share if you have.thanks in advance.
Regards,
Pramod Gupta.

Issue Saving Between Multiple Systems

Similar Messages

Maybe you are looking for