Issue :Storage bin is not trigger in TO

HI
  I have totally two storage bin, i did PO- GRN, iam trying to do trasfer order . but system is not trigger storage bin during the
transfer order
1) how many  storage bin required for creating transfer order.
2) iam trying to manage stock in one storage bin ,is it possible ?
with regards
dinesh

Hi,
yes, you can use one storage bin till u don't have mention capacity of bin.
WM bin search strategy
Storage Bin Search Strategy is failing
http://help.sap.com/saphelp_470/helpdata/en/c6/f83fe54afa11d182b90000e829fbfe/content.htm
Kuber

Similar Messages

  • Inventory in storage bins should not be allowed to go negative

    Hi
    Inventory in storage bins should not be allowed to go negative?
    Regards
    Vivek

    you can uncheck the "Allow negative stock" for the combination of warehouse and the storage type.
    Path is-
    SPRO > Logistics execution > Warehouse management > Stock removal startegies.
    Then select your strategy.
    Check out if it helps.
    Regards,
    nilesh

  • Storage bin are not found

    Hi Gurus,
    Could you please help me for my query. We are doing Outbound deliveries for Stock transport orders and we TOs are creating
    through VL06O. and some time we are using LT01 to move the material form bin to bin and while confirming the TO system is
    giving the error, storage bins are not found but bins are there.and what is the reason for this and how to resolve this.
    2. One more Query:
    What is the use of LT10 (As i know it is for the bin to bin transfer).
    but we have LT01, here also we can transfer bin to bin. what is the main difference. Plz explain
    I will appriciate your help.
    thnx
    raghu

    Hi
    Find below the answer of your Q
    1) Check the storage type defined into the WM1 view for the same material. Check the availability of bins in the same storage type
        if both are matching then check the weight parameter of the storage bin and the pallet which you are planning to move into the 
        Bins
    2) LT01 is for single line item whereas LT10 is for collective processing
    Regards
    Manish

  • Storage bin does not exist

    Hi Experts,
    While doing the goods issue while confirming the production order (Mvt 261), i am getting error message for the component " Storage bin 01 does not exist (check your entry)   Message no. L9 009"
    I dont know why it is only checking storage bin as 01, where as stock is maintained in other bins also,
    Whether i am missing any point in this.
    Pl help.
    regards
    Utsav

    Hi,
    Find out why movement type for a component is looking for 01 as storage bin.
    I am also finding out this issue.
    It must be some fixed bin assigned at storage type level in material master.
    I checked in MMR, but no fix bin is assigned in WM2 view. Field is blank. No entry is maintained.
    Or check movment type setting what is the source
    Where to check this?
    Also check any storage bin created for production supply storage type.
    Where to check this?
    Also youmay need to check any special Movement indicator in material master WM 1 view.
    This field is blank in MMR.

  • Storage bin does not exist error when during transfer posting in MB1B

    Hello All,
    I am getting the error message "  Storage bin [WH no, Storage type] does not exist Check your entry"  during transfer posting in MB1B from one storage location  to another for ex 0007 to 0001. But i can able to do transfer posting from 0001 to 0007 without any error.
    Please provide your solutions/suggestions
    Thanks
    Benny

    Benny Sampath wrote:
    Here is the error message "Storage bin 56A 870  does not exist (check your entry)"
    >
    > Thanks
    > Benny
    I can only see 2 values instead of the expected 3.
    what is 56A ? is it bin, warehouse or storage type?
    what is 870 ? is it bin, warehouse or storage type?
    one variable that is need  to have a hit in table LAGP is missing, hence you get this error.
    you have to find out why this variable is missing.
    But there is a wide area to look. Hence you should first answer the questions, as this would limit the options where to look.

  • LX26, Quant for storage bin can not be counted

    T code LX26 , executed for a WH/storage Type .The report displays some bins as Ready/Blocked or Overdue /Blocked and when trying to activate those for counting the error message flashes -
    Quant for storage Types XXX can not be counted .
    How can I unblock these bins and activate for cycle counting.Please help

    you must not have any open TO for this quant
    the quant must have a positive quantity, negative quants cannot be counted
    make sure that this quant is not included in any other still open count

  • Not all storage bins in LX16 transaction Carry Out continous inventory

    Hello,
    I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
    Can somebody help us??
    Thanks in advance

    hi
    LX16 transaction is only for " Continious Physical inventory Counting Only"
    LX03 is for bin status Report
    Take Continuous Inventory
    Purpose
    With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
    Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
    The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
    Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
    With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
    When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
    Prerequisites
    Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
    Process Flow
    To run a continuous inventory, you need to complete the following steps in the order displayed:
    Plan the inventory by selecting storage bins, for which you want to take inventory.
    Create the system inventory record
    Activate the system inventory record
    Print the warehouse inventory list.
    Take physical inventory in the warehouse.
    Enter the inventory results
    Close the inventory
    Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
    hope this helps to solve your issue
    regards
    KKY

  • Error - No destination storage bin to be found in storage type

    Hi all,
    this is my flow -
    Create STO PO - ME21n
    create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
    create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
    confirm TO- L_TO_CONFIRM
    Using BDC i am doing PGI for VL02n
    create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
    confirm TO- L_TO_CONFIRM
    Create GR - 'BAPI_GOODSMVT_CREATE'
    Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
    No destination storage bin to be found in storage type 104
    I have added 2 lines in the FM at exception part -
    error_message = 16
    OTHERS = 32.
    So my return code for the FM -  L_TO_CREATE_DN (_FOR i/b delivery)_is 16
    message class : L3
    message number : 009
    message type : E
    No destination storage bin to be found in storage type 104
    Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
    Pls help me.
    Sen

    Hi all,
    Thanks for your replies.
    Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
    Storage Bin search Strategy:
    (1) By storage section: Not active
    (2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
    I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
    This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
    When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
    Hope my scenarios are clear. Thanks in advance for your help again.
    Best regards
    Nagarajan

  • CO27 is showing blank values in Warehouse,Storage Type and Storage Bin

    Hi Gurus,
    I am using CO27 to generate pick-list for a production order. The pick-list is being used by Warehouse team to Goods Issue for the Production Order.
    However, the problem that I am facing is that in the pick-list generated from CO27 is showing blank values in Warehouse,Storage type and Storage bin.
    So, it is becoming difficult for the Warehouse to do the picking based on this pick-list.
    Could you please advice how the fields Warehouse,Storage Type and Storage bin can be populated in the Production Order pcik-list.
    Is these values are fetched from Material Master data or any other place?
    Thanks & Regards
    Subhasis

    Hello
    You should implement the following note:
    384427 - CO27/COIK: Storage bin is not displayed
    BR
    Caetano

  • Issue with posting change note processing using movement type 309

    while processing Posting change note using transaction LT05, i am getting error 'Available quantity is less than selected quantity'. we need the quantity in posting change note to be picked from same storage bin from where it has been picked during transfer posting using 309. currently, it is showing all storage bins in ascending order for selection while Posting change note posting.
    if we reqwhile mass porcessing of Posting change note using LSMW, it pickes the 1st storage bin. if 1st storage bin quantity is less than selected quantity of PCN then it is showing above error.

    Hi Vishal,
                      The materials are managed by batch? Please check the batches of the material in the different storage bins. SAP asign the storage bin taking into account the material batch number and the oldest quant.
    When the storage bin is not indicated, SAP looks at the batch number, and goes to the storage bin where this batch for the material is allocated. If SAP find more than one storage bin, SAP consumes from the batch that has the oldest quant.
    I really dont understand deeply your question.
    Hope it helps.
    Regards
    Enzo

  • More than one Quant in a Storage bin section (Strategy P)

    Dear all,
    We have a Storage type with Putaway strategy P, the SUT check active but no SU Management active, Mixed storage = X and Addition to stock = X.
    For this Storage type, our Storage bin type and SUT we have set up in customizing a Bin sectioning 3 meaning the Storage bin is divided into 3 sections so a maximum of 3 Quants per Storage bin. Note that other Bin sectionings have also been set up.
    During testing I found out a Storage bin section can only contain one Quant at a time.
    Because of Addition to stock = X we can add more quantities of the same Material/Batch to a Storage bin secion that already contains stock of this particular Material/Batch.
    If I try to add a Material/Batch to a Storage bin section that already contains stock of another Material/Batch (so, a different Quant), the system gives me an error:
    Bin item X in storage bin Y already occupied
    Message no. L3063
    Now physically for the mentioned SUT our Storage bin is divided into 3 Storage bin sections/pallet places and on a pallet it should be allowed to put multiple Materials/Batches at a time, that is why we set Mixed storage = X in customizing.
    Now we can only put one Quant (so one Material/Batch) in a Storage bin section at a time;
    We want to be able to put more Quants into a Storage bin section at a time.
    How can we achieve this?
    Note we rather donu2019t want to use Storage Unit Management.
    Thanks for any clues!
    Kind regards,
    Bart

    Hi Bart,
      As a thumb rule you cannot have one quant with multiple Materials. Ofcourse you can keep on adding same material /batch is the same quant i.e. in the same Bin section where you already put the material.
    Quick win for your case is Increase the number of quants allowed say 15. In this case you can keep on storing different material / batches on the same pallet but system will keep on generating sections.
      At any point of time you can easily track how many quants (Mat + quantity)  are stored in that Bin & relevant section.
      For strategy P , SUT check must be activated you cannot skip it.
    If Business is not ready to work with more number of sections , you can always think of mapping another startegy ..you could do more test with Bulk Storage.
      To my knowledge Strategy I i.e. Addition to existing stock with Mixed storage Indicator will work very well here.
      You just need to map appropriate Capacity check as startegy I goes with active capacity.
    Thanks,
    Mahesh

  • Storage bin 916 0085192173 is currently blocked

    Dear All
    I Save VT02 (shipment), I have error message "Storage bin 916 0085192173 is currently blocked"
    Please help me
    thanks
    imron
    Edited by: Muhammad Nur Imron on Sep 30, 2010 5:34 AM

    This error appears from the warehouse associated with the plant.
    storage type 916 is for outbound dispatch and the bin 085192173 is the associated delivery number. There seems to be some problem in the storage type (negative stock, perhaps)
    I assume you are creating the shipment for a delivery that has not been PGI'ed yet.
    Please check that there are no open transfer orders linked to the storage bin (use LT04 to identify open TOs). If there are, then confirm them using LT12.
    Normally the storage bin should not exist after PGI is done. If it exists, please check the stock position of the storage bin (use  LS03N for this).
    All the best!
    Regards,
    Aroop

  • Storage bin Type Change during TO creation

    Hi friends
    Is it possible to change Storage Bin type (Not Storage bin no)during Transfer Order (TO) creation in LT06 / LT04 ? If so please let em know the procedure to bring storage bin type during TO creation.
    Please confirm
    Rgds
    Madhavan

    Hi,
    Please check and try to define Storage Bin Type (SPRO->LE->master data->storage bins), then activate  Storage Bin type search strategy in OMM1.as appropriate. (in my past experience system given priority to Storage type search and then to Storage BIn type search during picking- I am not sure whether this is the SAP logic or priority).
    Once you define and assing the Storage bin type to Bins this will be available during creation of TO.
    Hope this helps.
    Thx
    MJ

  • Error storage bin

    movement type 311
    tcode mb1b
    from sloc 00
    to slco  01
    quantity  20 pc
    error is coming storage bin Z1 not found
    settings i have done in warehouse
    in 311
    destination storage type   :  921
    in material master  :  stock placement (maintianed)
                                    stock removal (maintianed)
                                   storage section (maintianed)
    search atrategy  for storage type (maintained for high rack and goods are to be removed from here )
    search strategy removal and Putway BOTH ARE MAINTAINED FOR HIGH RACK AND SHELF STORAGE
    Edited by: Rahul Tyagi on Feb 12, 2008 11:56 AM

    i have created 4 storage types  IN my warehouse Z1 and asigned this Z1 to plant and sotrage location SLOC 00 & SLOC 01 in spro>ep>assignment>le
    now both the sloc are assigned to the same warehouse that is z1 so it means boththe sloc have same sotrage area avilable
    goods are lying at high rack(storage area) for sloc 00
    in material master storage indictor for stock placemnt mentioned sz1
    entry in storage type seach is like this
    Z1(WH)   E(STOCK REMOVE)    ZSI(STORAGE TYPE INDICATOR)     HIGH RACK (STORAGE TYPE)
    FOR STOCK REMOVAL ENTERYS ARE IN STORAGE TYPE SEARCH LIKE THIS
    Z1(WH)   A(STOCK PUTWAY)         ZRI(INDICATOR FOR STOCK PUTWAY)       SHELF STORAGE
    I HAVE ALSO CREATED THE STORAGE BINS FOR ALL THE STORAGE TYPES
    AND POINT TO NOTE IS Z1 IS NTO A BIN ITS THE NAME OF WAREHOUSE  
    IF ASSIGN INTERIM STORAGE AREA IN 311 N FIELD SOURCE THEN IT WORKS FINE
    BUT IF I ASSIGN INTERIM AT DESTI THEN THE ERROR COMES AS GIVEN IN THE VERY BEGI.
    AND THE RIGHT WAY IS TO ASSIGN THE SINTERIM IN THE DEST. IN 311
    PLEASE SUGGEST THE SOLUTIONI CAN ALSO SEND U THE SCREEN SHOT IF U CAN PROVIDE U RMAIL ID (IF IT IS POSSIBLE FOR U)
    Edited by: Rahul Tyagi on Feb 12, 2008 12:08 PM

  • Transport the created Storage Bin Automatic from develop to quality LS10

    Hello,
    My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
    He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
    The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
    There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
    Cheers,
    Marta

    I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
    Thank you very much.

Maybe you are looking for