Issue : Symbolic Account with GL accounts

Dear Forum,
I understand that :
several wage type can go to 1 symbolic account ;
1 wage type to several symbolic ;
1 symbolic to 1 gl account ;
several symbolic account to same gl account ;
May I know what is the reason cannot have 1 symbolic account to several gl account (ignore the employee group)?
Thanks
Rgds

Hi srina yaya,
If you create one symbolic account to several GL Accounts that creates lot of problems to Accounts people while preparing the Balance Sheet for the year.
Normally company people shows expenses on different heads... for example ... Salaries (GL account). At the end of the year or quarter, the company accounts people show this munch of amount we have spend on Salaries in balance sheet. That Salaries (GL) includes.. (Daily Salaries, Monthly Salaries, Hourly Salaries, Salaries to everybody.... (these are called Symbolic Accounts.. the accounts that are symbolic to Salaries GL account)..
That is why we match several Symbolic Accounts to One GL Account. I think now you get the point.
Regards
Venu Gopal

Similar Messages

Unread email account with different accounts

Hi,
I have multiple accounts setup on my z10.
Is there a way I can break the unread email count on the lockscreen and know how many unread emails are there in each account.
Thanks!

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Unread-email-account-with-different-accounts/m...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe Bridge permission issues when working with network account

We have some users using Adobe Bridge CS3, CS4 and CS5.
They are using Bridge to browse arround the file server.
I have ACL's so the users can have full access using the Finder, deleting, making folders etc.
Users are logged in to their AD account with their home folder synced to a Mac OS X server 10.6.4.
Unless they are Posix owner of a folder they can't make changes or nothing using Bridge.
If they log in to a local account on a Mac and then manually connect to a share on the same server all is fine with Bridge. They can make folders, delete files etc etc.
Any ideas?
I know Adobe made it easy for themselfs years ago by simply stating it is not supported to work on a server using any Adobe app.

jhellstrom wrote:
We have some users using Adobe Bridge CS3, CS4 and CS5.
They are using Bridge to browse arround the file server.
I have ACL's so the users can have full access using the Finder, deleting, making folders etc.
Users are logged in to their AD account with their home folder synced to a Mac OS X server 10.6.4.
Unless they are Posix owner of a folder they can't make changes or nothing using Bridge.
If they log in to a local account on a Mac and then manually connect to a share on the same server all is fine with Bridge. They can make folders, delete files etc etc.
Any ideas?
I know Adobe made it easy for themselfs years ago by simply stating it is not supported to work on a server using any Adobe app.
As you said Adobe washed their hands of the matter and as any business customer is almost certainly going to use a server, and as Adobe products are so expensive pretty much only business customers can afford them, this is totally inexcusable.
I had a similar network login related problem with Acrobat Pro in version 7.0 which after +two years+ (no exaggeration) was eventually fixed in Acrobat Pro 8.1. Unfortunately it was then broken again in Acrobat Pro 9.0. Based on my experiences with Acrobat Pro and due to a totally different reason (nothing to to do with using Adobe SW) I found that when I switched from using AFP for network home directories to instead using NFS, my problems with Adobe software and network login accounts went away.
So, it might be worth your thinking about switching to using NFS for home directories as a workaround.
Adobe have become even worse than Microsoft for their software. They use a variety of sucky installers instead of Apple's free Installer (Microsoft have switched to using Apple's Installer), they use product activation, they are even worse than MS Office at working with servers. The only redeeming fact Adobe has is that their Mac and Windows products are mostly equivalent unlike Microsoft who still cripple their Mac software.

How do I replace Admin account with transferred account?

Just setup my new Imac. Used migration assistant to transfer via firewire my existing account from my Macbook. The transferred account shows up on my new Imac in accounts under "other accounts".
HOW do I replace my Main User Account with my newly transferred Macbook account as I don't want both accounts; just the one I transferred to serve as the main account? The option to delete the main account in system preferences > accounts is greyed out.
Thx.

For new Macs, I usually try to quit the setup assistant as soon as it will let me.
I define an initial account that has no personal information, and a user called "Master", or "Administrator", or something similar.
This account is then the bare bones original account as set up by OSX, and I never change it.
In this way, if an account becomes corrupt, I can always go back to this clean, unaltered account, and delete old (or add new) administrative accounts as necessary.
This would work for your condition as well. Just keep the new imported account as your main user, and the original account setup when the machine was new becomes your "backup" Master.

Re: Display Parent Accounts with Child Accounts

I am creating an Accounts Application and whenever the User query for particular Account Transactions, that Account's Parent Accounts must also return.
Here is the DML.
CREATE TABLE MYACC
(ACC_NO NUMBER(3), PARENTID NUMBER(3),
ACC_NAME VARCHAR2(20));
INSERT INTO MYACC VALUES(111,NULL,'ASSETS');
INSERT INTO MYACC VALUES(112,111,'CURRENT ASSETS');
INSERT INTO MYACC VALUES(113,112,'RECEIVABLES');
INSERT INTO MYACC VALUES(114,111,'FIXED ASSETS');
INSERT INTO MYACC VALUES(115,113,'MACHINERY');
CREATE TABLE MYTRANS
(TRANS_DATE DATE, ACC_NO NUMBER(3),
BRANCH NUMBER(1),TRANS_AMT NUMBER(10));
INSERT INTO MYTRANS VALUES('01-JUL-2006',113,1,10000);
INSERT INTO MYTRANS VALUES('01-AUG-2006',113,1,11000);
INSERT INTO MYTRANS VALUES('01-SEP-2006',113,2,12000);
INSERT INTO MYTRANS VALUES('01-OCT-2006',113,3,13000);
INSERT INTO MYTRANS VALUES('01-NOV-2006',115,3,12100);
INSERT INTO MYTRANS VALUES('01-DEC-2006',115,3,13200);
INSERT INTO MYTRANS VALUES('01-JAN-2007',115,3,15400);
INSERT INTO MYTRANS VALUES('01-FEB-2007',115,3,13000);
If I query for Branch No. 3,
and Trans_Date between 1st July 2006 to 31st Dec 2006
following should be displayed.
Branch     Account          Trans_Date     Trans_Amt
3     Assets
3     Current Assets
3     Receivables     01-OCT-2006     13100
3     Fixed Assets
3     Machinery     01-NOV-2006     12100
3     Machinery     01-DEC-2006     13200
If I query for Branch No. 3 and Account No. 115
following should be displayed.
Branch     Account          Trans_Date Trans_Amt
3     Assets
3     Fixed Assets
3     Machinery     01-NOV-2006     12100
3     Machinery     01-DEC-2006     13200
Any idea please ?
Best Regards,
Luqman

Dinamic select for find the children:
          select *
          from myacc
          start with acc_no = &Code
          connect by prior myacc.acc_no = myacc.parentid

Can I replace primary iCloud account with new account?

Would like to replace my @me.com iCloud account with the e-mail address I have been using for the last 20 years. Can this be done?
Can I save the contests of my @me.com iCloud account to the computer hard drive?
Thank you,
prb2712

From the knowledgeable Roger Wilmut:
You can't change the primary email address, the one you created when you opened an iCloud account (or if you migrated from MobileMe the address you log in with) other than by opening a completely new account.
http://support.apple.com/kb/HT5621
However you can create three 'email aliases' - these are extra addresses, not accounts, which deliver into the same inbox as the main address.
http://help.apple.com/icloud/#mm6b1a490a
It's actually quite a good idea to give out an alias address rather than the main one, since these can be easily changed should you get spammed.
New addresses will be @icloud.com: at present not everyone's account has been updated to use the @icloud.com address and if yours hasn't you won't be able to create an alias until it has.

Control Account with Casflow account and cashflow relevent

Hi !
I use SAP 9.0 PL9 . There is 1 problem with Cashflow
I setup 1 account in Chart Of Account:
1. Control Account
2. Cash Account
3. Cashflow relevent
I can't chose Primary form Items cashflow at Journal Entry. No way to record cashflow transaction with that account. How can I solve this problem?
Regards,
Hong Bich

Hi Gordon,
Thanks for your reply, but I finally manage to find where the problem was. Somehow the "Allocation account" (aka Transfer account) automatically switched from common account to control account (this behavior has been reported in note 1305645). I checked in the backup I did before upgrading the DB and that same account was a common account, so my guess would be that it changed during the upgrade.
Once you manage to uncheck the "Control account" checkbox, the problem is gone.
Thanks again anyway,
EB

Issues syncing 4S with iTunes - account problem?

I have an iPhone 4S and iTunes 10.5. This morning I was going to sync my iPhone when I was prompted to authorize my computer - the same MacBook I've been using to sync with for the past two years, the same one I used to setup my 4S last week, etc. Then I was prompted to enter my AppleID to authorize auto-purchases. First I tried my Apple ID with the @me.com domain and the correct password, but the credential entry/auth window appeared again. Re-entered credentials, it reappeared.
So for the third try I entered my old Apple ID, (which was my email address) and password, and the auth window went away. But now iTunes is sitting on step 7 or 7 (synching Genius data) and the status bar says "Waiting for Objects to Copy", but it never goes further, and I end up ejecting my phone.
I can't tell if this is an iTunes problem, iPhone problem or account problem. Any ideas?
PS: apologies if this is in the wrong forum, please move as needed...

If you only want the free iPhone apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
Note that this only applies to the App Store; you will not be able to get any of the free content in the iTunes Store without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.) And since you already started to create an account, you'll probably have to start over, which will mean selecting a different email account; you can set one up temporarily in a free service such as Gmail if you don't have another permanent email, and then go in to your account afterwards and change the email address.
Otherwise you'll have to enter in some sort of payment method, either a credit card (it can probably be one of the "prepaid" ones many banks offer) or a prepaid iTunes card.
Regards.
Message was edited by: Dave Sawyer

Link Mac account with server account

I haven't been able to find anything on this issue, thought I would post and see if anything comes up. Before switching to 10.6 from 10.5, I had each Mac workstation's main user account paired with an XServe account in System Preferences - Accounts. When we needed to share a volume from any station, we could just choose the share permissions from an automatically generated list of server accounts. After upgrading to 10.6 (with clean installs, as there had been too many upgrades and migrations over time) we have lost the System Preference option to select a server account, so we have to enter those server accounts manually.
Is this something that has changed from 10.5 to 10.6?
I have tried creating new accounts, hoping the option would return, but no luck. I still have the option on my Mac Pro but I installed over 10.5 (I know - asking for trouble). Has anyone else found this problem?

I guess you running a open directory on your server, have you paired the Mac's with the server, The new way do that is in account preferences/login option/join network account server.

Merge iTunes Store Account with MobileMe Account?

If I try to change my UID to my MobileMe account ID in the iTunes Store, I get a message saying I can't, and that I need to re-sign-in using my MobileMe account ID. However, when I do this, none of the permissions or authorizations are attached to the new account and I need to authorize my purchases using the old account info.
Is there any way to merge my old iTunes Store account into my MobileMe account?

Click here and fill out the form.
(33752)

Can i have 1 account with sub accounts

i have kids with iPods and an iPad when one gets a face time request all get notified, can this be changed

No but see:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

Issue with Payables Accounting Process

I have an issue right now with Payables Accounting Process. Is says:
Oracle Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APACCENG module: Payables Accounting Process
Current system time is 25-AUG-2009 13:23:41
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_START_DATE='2009/08/02 00:00:00'
P_END_DATE='2009/08/23 00:00:00'
P_JOURNAL_CATEGORY='All'
P_SUB_TRANSF_TO_GL='N'
P_SUB_JOURNAL_IMP='N'
P_VALIDATE_ACCTS='Y'
P_SUMMARIZE_FLAG='N'
P_COMMIT_CYCLE='50'
P_ORG_ID='81'
P_DEBUG_SWITCH='N'
P_TRACE_SWITCH='N'
P_RUN_ACCT_REPORT='N'
APPLLCSP Environment Variable set to :
Current NLS_LANG Environment Variable is :
American_America.UTF8
MSG-00002: Check that AX is not installed before calling the accounting engine
MSG-00003: AX is not installed, Calling the accounting engine
MSG-00004: After the call to AP_Accounting_Engine_Pkg.Do_Accounting
MSG-00005: Error occured in the accounting process
MSG-00006: Error Message: ORA-20100: File o0002869.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. occurred in
&CALLING_SEQUENCE
with parameters (&PARAMETERS)
while performing the following operation:
&DEBUG_INFO
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 6.0.8.20.2 - Production on Tue Aug 25 13:23:41 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 820318.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 25-AUG-2009 13:23:43
I had a similar issue writing to the UTL_FILE_DIR with the AR Interface and was able to resolve that by checking the read/write permissions on the UTL_FILE_DIR sat in the init.ora. However, the strange thing here is I still get the same error for Payables Accounting Process.
Any insights would be greatly appreciated.
Thanks,
Don

This issue has been resolved. But the solution for me was totally unrelated to the error message that came up with this issue.
We had rollback issues in average and layer cost worker under Bills of Material. And after applying patch 3325415, this issue was also resolved.
This issue has been answered but if anyone has any ideas on how this issue got resolved by patch 3325415, i'd like to understand.
Thanks,
Don

Need to merge my skype account with Microsoft acco...

I can not use my skype account in my Lumia 820. Its asking for Microsoft account. Now Need to merge my skype account with Microsoft account. How to do that ? For your kind information. I was use skype(most) and live too. So I do not get the automatice merge option.
Please advice ASAP. I need to use skype in mobile very urgently.
Solved!
Go to Solution.

When you sign in with your unlinked Microsoft account, you will be prompted to enter your Skype credentials.
Here are more specific instructions:
http://community.skype.com/t5/Windows-Phone/Skype-for-Windows-Phone-Sign-In-Process-Changes/m-p/2946...
Follow us @SkypeSupport.
To get the most out of Skype I recommend Skype Premium.
Download Skype for Windows Phone from the Store.
Found this post useful? Please give Kudo. Helped to fix your issue? Mark it as a solution to help others, Thanks.

Error- Postings to G/L accounts with open item management are not permitted

Hi,
Can't we post to a GL, which is open item managed, in a non-leading ledger (statutory ledger)? We get this error when we try to post an entry, in the statutory ledger, to a GL that is open item managed.
Can anybody explain this, please?
Regards,
Mike

This is due to a design with the new GL.
In the new G/L accounting, when you use a particular ledger or ledger group, you can no longer make a direct ledger specific posting to accounts managed on an open item basis or to accounts with an account type not equal to 'S'.
You need to do posting with ledger group blank, which updates all the ledgers. The idea is, for open item accounts, all the ledgers should be in sync. for open item accounts IFRS and Local GAAP values are never different.
If you are doing this to do some correction posting while doing year end posting or migration for example. (A typical example is when an account is made open item managed at a later date). You need to change temporarily message control using transaction SE91 to force ledger specific postings to OI accounts

Account ID & Alternative Account Number Info

Hi,
Can some body help me in understanding the Following
a) What is AccountID in FI12 T-Code
b) What is the purpose of Alternative Account Number and how is it used.
It would be helpful if it could be explain with an illustration.
regards
Shirley.

a) Account ID is a 5-character ID with which you want to identify the bank account you are holding with your bank. For example, EURCA is a current a/c. maintained in currency EUR with the bank. This ID, along with the house bank ID, uniquely defines a bank account. This is the ID using which you set up bank determination in FBZP.
b) SAP help text on this field is quite explanatory. Here it goes...
Alternative Bank Acct Number (for Ambiguous Acct Number)
The alternative bank account number is used for distinguishing house bank accounts with identical account numbers. This can occur if a house bank manages accounts in different currencies using the same account number.
The alternative bank account number must then only be defined if it differs from the bank account number. You must maintain it together with the bank key in the system.
If you have house bank accounts with identical account numbers and use the electronic account statement for these accounts, then you enter the internal key used by your house bank here (usually the account number with attached currency encryption). If you use the manual account statement, then you can freely assign the alternative account number. Using bank account number + currency code is, however, recommended.

Issue : Symbolic Account with GL accounts

Similar Messages

Maybe you are looking for