Issue synchro Notes since new version

Hi,
I have an iPhone 3G (os 3.1.2), itunes (9.0.2.25) and Outlook (2003 SP3) under windows XP Pro.
Synchro of Contacts & Calendar work fine.
Firts time I have synchronized NOTES it works.
But after installing a new version (itunes or/and iphone, I didin't remmember) NOTES synchro failed.
After investigation I find that NOTES are replicated to my iPhone only if they are on 'Handled Synchronisation' Outlook folder.
How to modify this & come back to replicate Notes from NOTES folder.
GaetGaet

Yes, Bee, I clear the cache and history on a regualr basis, and I clear the cookies, too. And this was my habit when Safari was working fine for me, so it's not that.
Interesting what you say about MacKeeper. Others on this site seem to detest it, though I haven't see it cause any trouble (I don't use their anti-virus stuff or any realtime protection, though, I only use it for cleaning up duplicate files, etc.). I'll read more about it.
And I installed that way before the new versions of Safari came out and had no problems then, either, so I don't think it's the culprit.

Similar Messages

System should not creates new version when value of PO increased..

Hi Experts,
Need your help to solve this problem. When i increase value of PO it should retrigger Release strategy but it creates version first, then i have to tick completion indicator and check then only release strategy retriggers..
It should not create new version when change po
Please check below screenshot
Please help

Hi
Please reveiw the following points in note
   - 493900 FAQ: Release Strategy
      4. Why is the release strategy not determined?
     "If you use version management, the determination of the release
      strategy starts when the version is completed.
      You complete a version by setting the "version completed"
      indicator in the version tab."
   - 662993 Resetting an already occurred release
     You edit a purchasing document with release strategy.
     You change the quantity or the price. In spite of that, the
     already set release is not reset.
The release strategy works the same with or without version management
active - the only difference in case - version management is active -
is that if release is to be reset, it will be reset only on version
I hope this helsp to clarify this issue
Kind regards,
Lorraine

In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/

Ipad will not accept new version of itunes

ipad will not accept new version of itunes

What version of iTunes are you trying to install. If its 10.6.3 or 10.7, those versions are installed on a computer, not the iPad.
 Cheers, Tom

Generate DDL works in old version of SQL Developer, but not in new versions

Hello all,
How to generate DDL in new versions of Oracle SQL Developer for production Oracle database?
For production database, the generate DDL feature works fine in old versions (version 1.5.5) of Oracle SQL Developer, SQuirrel, Toad and many other similar tools, but not the new versions of Oracle SQL Developer (such as 2.1.1.64.45).
The SQL tab for a table is blank for me in production databases. Of course, it works fine in development Oracle database.
I did some research that many articles describe SELECT_CATALOG_ROLE as the required read-only role in production database. Our DBA did a test to grant me this role temporarily, and it worked for me to generate DDL using new Oracle SQL Developer. It is pain for me to ask for this role.
Is there a plug-in or work-around, so the new versions of Oracle SQL Developer can have this generate DDL feature in production without the mentioned SELECT_CATALOG_ROLE?
I could not find the answer in older forum threads.
For now, I will have to install older versions of Oracle SQL Developer.
Thanks

I've seen a couple posts about people not being able to generate DDL for other users. To date, I've never seen a anybody post a workaround, nor have I seen one of the developers post a response, nor have I seen anybody say they've submitted a SR.
I think I remember reading somewhere that the new version of SQL Developer uses dbms_metadata.get_ddl to generate DDLS, rather than some custom query built on top of catalog views...which could explain why it use to work, but no longer does. But whether or not this is true, I don't know.
You could try submitting a SR and see if Oracle responds saying that it's a known bug and will be fixed in the next release. Until then, unless you get the role, you're stuck using something else for DDL generation.

Hey, since new version came on yesterday, I can't attach EXCEL or JPEGs to outgoing emails, using webmail.

I am hosted by GoDaddy, they have tried helping, re-setting the server, going to private browsing to see if having no cookies improves the problem,
Interesting, they host several websites and email accounts on separate servers, don't think the problem is with them, pretty sure this is new since new version of Mozilla was updated on my system yesterday.

OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download.

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?

Go to iTunes > about iTunes. What version are you running? If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.

I have a mac computer its not the new version but its definetly no the old , so anwa it sa that I cant download anything because it doesn't support its arcutecture , what does it mean by that? please answer. Thank you, bye

I have a mac computer its not the new version but its definetly no the old , so anwa it sa that I cant download anything because it doesn't support its arcutecture , what does it mean by that? please answer. Thank you, bye

Which version of operating system are you running? Please go to Apple in menu bar, click on 'about this Mac" and click on the numbers under the big Mac OS X until you see "version 10.x.x" - copy what it says and post it here please.

Adobe Flash crash when I try to upload some photos to create an album on Facebook . I think this issue related to the new version of Mozilla Firefox that I had installed 3 days ago and cause my system not able to open the internet . But I have sent a rep

Adobe flash crash when I try to upload photos to created album on Facebook . Is this related to the new version of Mozilla Firefox that I installed few days ago.
== This happened ==
Not sure how often
== This morning July 18th 2010

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

Aperture not creating new version of raw image when editing in external editor

I have my export settings set up in Aperture 3.5.1 as editing int Photoshope Elements 12 as Tiff files. When I right click on a raw photo in aperture and say to edit in PSE, it will open it in the program, but only in camera raw.
This happens even when I have made edits to that particular file, such as exposure. This is causing problems with saving back to aperture. I have troubleshot this with Elements and the problem seems to be that Aperture is not creating a new version on export.
Can you tell me what I need to do?
Thanks so much for any insight.

What you have described is not how it is meant to work so it sounds like there is an issue on your system.
Try running the first two first aid procedures (repair permissions and repair database) as described here:
http://support.apple.com/kb/HT3805
I think this should fix the issue, but let us know if it doesn't.
PS: When you drag the image from Aperture to PSE on the task bar, you are sending the JPEG preview to PSE, so that's an unrelated process.
Andy

Safari Problems Since New Version

So I'm someone who actually likes using Safari and I used to experience very few problems with it. Until recently. This started happening as soon as Apple released the new version (can't remember the version number), the one with the improved reader in the side bar (a feature that I love).
For reference: I always update my stuff, so I have the latest versions of everything that the OS will allow on both comptuers that are experiencing the problem.
One machine is my laptop, running the latest Lion (10.7.2) and the other is an iMac at work, funning the latest version of Snow Leopard. I also often run MacKeeper to clean the system cache's etc.
1. Both computers running Safari exhibit a strage problem in which, at randome times, all the browers reset and reload. I'm trying to find out what causes this, but because it is so random, it's hard to identify the cause.
2. My laptop, a 2008 MacBook (2GHz Intel Core 2 Duo with 2BG RAM), often shows a spinning rainbow ball when browsing in Safari. This is happnening more frequently with the more recent update and the time it spins is longer.
3. Flash-based site seems to have more trouble with Safari. It's not that they don't work, they just are a but slower than they used to be. This is more noticeable on my laptop, which makes me wonder if it's processor or memory issue. Though I have a hard time seeing why, as the problem was not there just a few months ago.
In contrast Firefox does not exhibit these problems, though I admit I do not like using it as much, and it has its own problems.
There may not be an answer to this. My hope is that Apple is monitoring these forums and taking note these bugs. I do not seem to be the only one having them. But, of course, if anyone has any advice, it is appreciated.
Oh, before you answer, "Buy more RAM," know that I am considering doing that, but my experience with past laptops and computers in my 15 years of using Macs is that RAM upgrades deliver almost unoticeable improvements and that answer is more often buggy software.

Yes, Bee, I clear the cache and history on a regualr basis, and I clear the cookies, too. And this was my habit when Safari was working fine for me, so it's not that.
Interesting what you say about MacKeeper. Others on this site seem to detest it, though I haven't see it cause any trouble (I don't use their anti-virus stuff or any realtime protection, though, I only use it for cleaning up duplicate files, etc.). I'll read more about it.
And I installed that way before the new versions of Safari came out and had no problems then, either, so I don't think it's the culprit.

Do not want new version for rdl file for each snapshot rendering

ssrs 2012 sp1 sharepoint mode, sharepoint 2013
option set for the report - render from snapshot, a schedule set for the snapshots creation
each snapshot rendering adds new viersion to the rdl file with updated field
Execution DateTime - not really sure who needs this "feature" but it would be nice to switch this off/fix a bug
Sergey Vdovin

Hi Sergey,
Sorry for my misunderstanding.
In SharePoint, the generation of a report version is determined by the modifications of the entire SharePoint list item. If any field of the list item is changed , it will create a new version for the list item. For a report RDL file uploaded to a SharePoint
document library, the report version is not just created based on the modifications to the report content. In your case, once it has generating a new snapshot, it will modify the column Execution DateTime value.
Besides, once we configure a report to render based on a snapshot, the Execution Datatime field will be available in the library view. However, if we create snapshots manually rather than based on a schedule, this field won’t be updated, hence, the report
version won’t be added. If we configure the snapshot to be generated based on a schedule, the Execution Datetime will be updated each time the snapshot is generated, thus the report version will be updated. This is actually a by design inconsistent behavior
between Reporting Services and SharePoint.
To avoid this behavior, on Reporting Services side, you need to either disable the snapshot or configure the snapshot not to run based on a schedule. Taking into account that this may be unacceptable for your, there is a possible approach on the SharePoint
side. In SharePoint, if we want an item to update without creating a new version based on a judgment condition, we can use Visual Studio workflow and with a code to determine when to update list item. Here is some resource about this topic for your refer:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/750658ca-5a5d-49cb-99c2-70335fd5375b/updating-an-item-in-list-with-out-creating-a-version?forum=sharepointdevelopmentprevious
http://www.codegain.com/articles/sharepoint/developmentprogramming/what-is-the-difference-between-splistitem-systemupdate-and-splistitem-update-method.aspx
Since the approach is related to SharePoint development, if you need more help, I recommend you post a question in the following forum to get dedicated support:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointdevelopmentprevious
Best Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Re-downloaded tracks not the newer version

I downloaded an album years ago at 128 kbps and have since upgraded the tracks to the 256 kbps remastered version. I've since had to start rebuilding my library due to some unforseen circumstances. When I went to re-download the tracks, they appeared in my library as the old 128 kbps versions. What happened to the newer versions? The album is called "So Far" and it is listed under both Crosby, Stills & Nash as well as Crosby, Stills, Nash & Young. I have attempted to contact the iTunes Store support team, but the link on the Apple site does not work. Do they not offer support anymore?

Because the web-site has a mobile version that you are accessing on you iPad.

Compressor not opening / new version not functioning

Hi folks- This is a stumper for any of you non-Intel chip users.
Short version: A new version of Compressor was installed on my G4 recently , which doesn't function properly. I tried uninstalling it, and reinstalling an older version, but the older version doesn't open.
Long version: I'm a professional videographer, and use FCP (Studio 1, 5.1) on a regular basis, frequently using DVD Studio Pro (4) for authoring DVDs, thus using Compressor (my last version was 2.3) as an intermediary.
For an unrelated project, I recently purchased Logic (8.0.2), which during installation also upgraded a few other Apple softwares in the process, including an upgrade to Compressor 3.0.3.
Unbeknownst to me, the Compressor 3.0.3 doesn't work on my machine properly, I'm guessing because it's an older machine. I opened up Compressor today for some routine work, to discover a warning that said:"The installed graphics card does not support the OpenGL features recommended by Compressor."
This warning still allowed me to open the program, but when I loaded up several files for compression, it gave me a warning, saying "Each target assigned to a job must have a setting and destination" EVEN THOUGH every item did indeed have both a destination and two settings. Hmmm...
So, I figured that since Compressor 3.0.3 wouldn't work correctly, I would uninstall it, and reinstall my older version off the FCP Studio disc. But when I did this, version 2.1 would NOT open at all on the machine. I could click the application all day long, but it won't open. Hmmm. I tried upgrading 2.1 to 2.3 through Apple's Software update, but the 2.3 upgraded to the 3.0 again. Arghh!
I'm either left with an un-openable 2.1 or a non-functioning 3.0. Any suggestions, recommendations?
-Chris

Hi Alberto-
Thanks for the reply, and the help. I was indeed dragging my settings onto the job itself (rather than the empty window), so I knew that wasn't the problem per se. But I'm so glad that you had within your previous post the URL to the Compressor Tutorial. Because at the very bottom of the tutorial page, I found exactly the problem I was having.
It's some strange quirk with Compressor 3--sometimes when you drag your settings onto the job, it still leaves the first line as a destination with no setting. That's what my machine was doing. It's an odd bug they should work out--and you can see what was happening on the bottom of the tutorial page you sent me.
Even so, I wasn't aware of this last night, so I had found an older support page about how to uninstall Compressor 3 (deleting files from the library folders & such--frameworks, receipts, et all), so I went ahead and did that, then reinstalled my Compressor 2.3 from scratch, and things worked well after that.
For the time being, then, I'm back to Compressor 2, but now I know that when I reinstall Compressor 3, I have to look out for that problem, and I'll know how to work around that odd quirk.
Thanks so much for your help, Alberto!!!
-Chris

Issue synchro Notes since new version

Similar Messages

Maybe you are looking for