Issue to connect Apex 3.2 after reverting from 4.0

Hi,
I did by mistake (SID error) an upgrade from Apex 3.2. to Apex 4.0 on a DB 10g R1 which is not supported by 4.0. - I regret by the way that the APEX 4.0 installation doesn't make any check on the DB version before executing..
Well I followed the instructions to revert to 3.2 (clearly mentioned in the Installation manual of Apex 4.0) but now I can't log in on my Apex 3.2 environment receiving the following error (Admin & Dev environments)
ORA-06508: PL/SQL: could not find program unit being called
Unable to run page sentry in application 4500.
Return to application.
I also checked the DBMS registry and I couldn't find 'APEX' in it.. That might be the reason ..?
Given that I have some applications in my Apex environment, I want to avoid to launch the apexremov.sql procedure & I think that I miss a little procedure to solve my issue..
Any idea ? As to me if I can solve the way the APEX installation or removing procedure updates the dbms_registry it would be quite helpful
Thxs in advance for your help.
Brgds,
Yves
Edited by: ymoricea on Oct 15, 2010 1:35 AM
Edited by: ymoricea on Oct 15, 2010 1:37 AM

Hi,
I've solved my issue and I'd like to share what went wrong.
After further investigation, I found that "Invalid Credential" page was not
affected by any actions I took. So I tried to change XML DB HTTP port
number then everything went wrong.
It seemed that not until changing/restarting XML DB HTTP listener,
the page of "Invalid Credentials" was just a cache in the listener and
not an actual response from APEX.
Cheers.

Similar Messages

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • Problems connecting to the internet after Upgrade from windows 8.1 pro

    Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
    Thanks

    Hi,
    You can also try to install the older version in compatible mode:
    Windows 8.1 Wifi showing "limited" or "No Internet Access"
    Solution: revert your network adapter driver back to an older version
    http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
    In addition, disable power management on your network driver:
    Open Network and Sharing Center.
    Click the Change adapter settings link in the upper left of the navigation pane.
    Right click the network connection you want to enable/disable power management support on and click Properties .
    Click Configure .
    On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
    If the issue still persists, please upload the event log for our research:
    Kate Li
    TechNet Community Support

  • Thunderbolt Display has issue with weird washed-out colors after waking from sleep (after upgrade to Mavericks)

    I've got a Thunderbolt Display that I use with my Macbook Air (mid 2012) - usually in clamshell mode.
    When I let the computer go to sleep, and then wake it up by clicking the mouse, the monitor turns back on but the colors are washed out and purple looking. 
    The display goes back to normal when I unplug and replug it to my laptop.
    I first noticed this problem after upgrading to Mavericks.
    I made a video demonstrating the issue here:
    http://www.youtube.com/watch?v=19179-MVpWA&feature=youtu.be
    Any ideas?
    Thanks!
    Will

    Same thing for me too.  Late 2012 13" MBP Retina.  I have to unplug the Thunderbolt cable and plug it back in.
    This has only started for me in the last two days.  The first two weeks of Mavericks was ok.
    Update:  I just got back from a trip.  I was using the laptop separate from the Thunderbolt display.  I hadn't restarted since I returned and connected the monitor.  I've just rebooted, and put the computer to sleep.  After resuming from sleep, the display is ok.  Maybe try rebooting?  I'll update if it continues.

  • 10.7.3 issues with reconnecting to the Internet after waking from sleep mode?

    My iMac worked great until this last update. Now it does not connect to the internet after I wake it from sleep mode. Any fixes?

    I have a similar issue.  My connection has been rock-solid since we went to Uverse, and now my computer loses the internet every 60-90 minutes or so. Driving me nuts.  iPhone still on wireless router to internet, so problem seems to be computer.

  • Cannot connect to X server after resume from suspend

    Hello,
    i'm a happy user of arch and i3, one and only thing that is not working correctly is that sometimes after resume from sleep (closing the lid, and then opening) I am not able to start any programs. this happens about 50% of the time. when it happens i have to exit i3 and login again, and everything works ok then.
    I'd be grateful for any suggestion how can I debug and solve this problem.
    y
    Last edited by yemu (2014-04-09 08:53:12)

    the error was, after running xterm:
    No protocol specified
    xterm: Xt error: Can't open display: :0.0
    after running scrot
    No protocol specified
    giblib error: Can't open X display. It *is* running, yeah?
    after running firefox
    (process:2559): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
    No protocol specified
    No protocol specified
    Error: cannot open display: :0.0
    but I think I was able to fix the problem.
    when I was browsing the internet for solution, I stumbled upon an info about similar problem caused by the hostname set to localhost. I checked my system, and apparently I haven't set my host name during install, and it was still localhost, so I changed it. and after that I tried suspending several times, and the problem never occured. I'll test in upcoming days, and if it works I will change the thread title to [SOLVED].
    Last edited by yemu (2014-04-10 07:40:47)

  • Issue with connecting to encrypted network after logging in.

    I work for an academic institution and we have two networks that the students are able to access the web by; open and encrypted. We have made each computer in the library default to access the encrypted network through an app called Xpress Connect and a majority of them work properly. However, after logging off a user and then logging back in, some of the computers claim they are connected to the Encrypted network and have the proper IP, however are unable to access web pages. When system preferences is opened, the 802.1X encrypted network still has the button to connect to encrypted. When the button is pressed, internet access is gained.
    I have deleted the following files from Library>Preferences>System Configuration:
         com.apple.airport.preferences.plist
         com.apple.network.identification.plist
         com.apple.smb.server.plist
         NetworkInterfaces.plist
         preferences.plist
    Then I restarted the computer and manually set the preferences to connect to the Encrypted network. The same issue occured where it says I am connected but I have no internet access. I then click the connect button under the Network panel of System Preferences and then it finally works.
    Is there any way I can set the computer to automatically start the connection to the 802.1X encrypted network?

    You'll have to talk to the Xpress Connect people, perhaps it requires a update.
    Mac's connect automatically to encrypted networks if it's stored in the keychain, provided they are not hidden and not WEP Encrypted networks since that's worthless standard now.

  • ACS loses connection with AD occasionally after upgrade from 5.2 to 5.3.0.40

    ACS had been integrated with Active Directory before ACS upgrade to 5.3. After the ACS 5.3 upgrade users aren’t able to login to AAA devices occasionally. Error message is:
    {AuthenticationResult=Error; Type=Authentication; Authen-Reply-Status=Error; }
    24429 Could not establish connection with Active Directory
    At the same time, when this issue occurs, ACS connection to AD works fine (checked with Users and Identity Stores> External Identity Stores > Active Directory “Test Connection”)

    I had the same problem, I opened a Cisco TAC case and my issue was resolved.
    Sent: Tuesday, 14 August 2012 9:58 AM
    Subject: RE: 622739355 HelpDesk#SVR328332-2 : Troubleshoot Cisco ACS 1121 v5.3 With Windows Active Directory
    Hi Ramraj,
    Thanks for the link to the article, but from what I’ve seen in the logs I’m not sure that we’ve got the same root cause to the issue.
    From the ACSADAgent.log files I can see log messages like:
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG network.state NST: SniffList: postfailsort=mykulad11p.cssc.dksh.net
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.kerberos.adhelpers Encryption (id 1) is not supported by KDC. Try next in the list
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.osutil Module=Kerberos : KDC refused skey: KDC has no support for encryption type (reference base/adhelpers.cpp:216 rc: -1765328370)
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.adagent Unable to refresh computer credentials: KDC refused skey: KDC has no support for encryption type
    This lines up with the error message that we see in the TACACS+ Authentication logs:
    24493 ACS has problems communicating with Active Directory using its machine credentials.
    I have come across a NETBIOS limitation (it’s not an ACS bug, but a bug has been filed for tracking and documentation purposes) that prevents two ACSs from being connected to Active Directory at the same time if the first 15 characters of their hostnames are the same. The bug ID is CSCtj62342 and its externally visible details are available here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj62342
    The hostname of the primary ACS is : MYMY-TPM-DC-ACS-1
    The hostname of the secondary ACS is: MYMY-TPM-DC-ACS-2
    From the hostnames, we can see that the first 16 characters of the hostnames are the same. What this means is that once the primary is connected to AD, after some time passes (this will depend on when the secondary goes an talks to AD) the secondary will lose its connection to AD and any authentications hitting the secondary will fail with the same error: 24493 ACS has problems communicating with Active Directory using its machine credentials.
    To resolve this issue, the hostnames of the ACSs will need to be changed so that the first 15 characters of their respective hostnames are not the same. Please keep in mind that this is a NETBIOS limitation and not a software bug.

  • Outlook can't connect with Exchange 2013 after migration from Exchange 2007

    <style type="text/css">P { margin-bottom: 0.21cm; }</style>
    Hello,
    recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
    But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
    To try to resolve it we've done:
    - Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
    - Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
    records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
    - In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
    Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
    - Check Outlook Anywhere block: we've cheked.
    Currently server state:
    - Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
    unless the mailbox. After a restart it can't start.
    -The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
    I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
    Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
    We continue to try to resolve the problem.
    Thanks to all in advance!
    Testing RPC / HTTP connectivity.
    Error in testing RPC / HTTP.
    additional Details
    Elapsed time: 24295 ms.
    Test steps
    Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
    Error in automatic detection test .
    additional Details
    Elapsed time: 24294 ms.
    Test steps
    Attempting each method of contacting the Autodiscover service .
    Failed to properly contact the Autodiscover service using all methods.
    additional Details
    Elapsed time: 24294 ms.
    Test steps
    Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
    Error in testing this potential Autodiscover URL .
    additional Details
    Elapsed time: 1509 ms.
    Test steps
    Attempting to resolve the host name in DNS empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 80.36.252.194
    Elapsed time: 507 ms.
    Testing TCP port 443 on the host to ensure empresa.com listening or is open.
    The port was opened successfully.
    additional Details
    Elapsed time: 464 ms.
    Testing the SSL certificate to make sure it is valid.
    The SSL certificate is not exceeded one or more certificate validation checks .
    additional Details
    Elapsed time: 537 ms.
    Test steps
    Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
    Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
    additional Details
    Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
    Elapsed time: 454 ms.
    Validating the certificate name .
    The certificate name was validated successfully .
    additional Details
    Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
    Elapsed time: 1 ms.
    Is validating the trusted certificate .
    Validation Error trusted certificate.
    Test steps
    Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = ​​mail.empresa.com .
    Could not build a certificate chain for the certificate.
    Tell me more about this issue and how to resolve
    additional Details
    The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
    Elapsed time: 31 ms.
    Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
    Error in testing this potential Autodiscover URL .
    additional Details
    Elapsed time: 21723 ms.
    Test steps
    Attempting to resolve the host name in DNS autodiscover.empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 46.16.56.40
    Elapsed time: 498 ms.
    Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
    The specified port is blocked , not listening or does not generate the expected response .
    Tell me more about this issue and how to resolve
    additional Details
    Network Error communicating with the remote host.
    Elapsed time: 21224 ms.
    Attempting to contact the Autodiscover service with the HTTP redirect method .
    Error when trying to contact the Autodiscover HTTP redirect method .
    additional Details
    Elapsed time: 606 ms.
    Test steps
    Attempting to resolve the host name in DNS autodiscover.empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 46.16.56.40
    Elapsed time: 14 ms .
    Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
    The port was opened successfully.
    additional Details
    Elapsed time: 202 ms.
    Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
    Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
    additional Details
    Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
    lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
    Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
    Elapsed time: 388 ms.
    Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
    Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
    additional Details
    Elapsed time: 186 ms.
    Test steps
    Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
    Not the Autodiscover SRV record in DNS found .
    Tell me more about this issue and how to resolve
    additional Details
    Elapsed time: 186 ms.
    Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
    Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
    Tell me more about this issue and how to resolve
    additional Details
    No Autodiscover CNAME record for your domain ' empresa.com ' .
    Elapsed time: 268 ms.
    jspt

    Hello,
    We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
    below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
    Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
    $AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
    RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
    Name                                 : EXCHANGE13
    Fqdn                                 : EXCHANGE13.domain.local
    ClientAccessArray                    :
    OutlookAnywhereEnabled               : True
    AutoDiscoverServiceCN                : EXCHANGE13
    AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
    AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
    AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
    AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
    AlternateServiceAccountConfiguration :
    IsOutOfService                       : False
    WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
    Identity                             : EXCHANGE13
    IsValid                              : True
    ExchangeVersion                      : 0.1 (8.0.535.0)
    DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                           (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=First Organization,CN=Microsoft
                                           Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
    Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
    ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
    ObjectClass                          : {top, server, msExchExchangeServer}
    WhenChanged                          : 09/03/2014 12:46:07
    WhenCreated                          : 08/03/2014 19:15:54
    WhenChangedUTC                       : 09/03/2014 11:46:07
    WhenCreatedUTC                       : 08/03/2014 18:15:54
    OrganizationId                       :
    OriginatingServer                    : severdc.domain.local
    ObjectState                          : Unchanged
    I hope this stuff can help you.
    Thanks!!
    jspt

  • Photoshop CS6 issue with shortcuts and my keyboard after upgrade from CS5

    I recently upgraded from CS5 Extended to CS6 Extended on my Mac (Mavericks), but installed it in English instead of German this time. I transferred most of my presets just fine, but none of the keyboard shortcuts were working. All I got was an unequal sign for all shortcuts and even manually changing them didn't get them to work. I found a few discussions about this issue and ended up adding a German keyboard, as I am always on the Romaji setting of my Kotoeri (Japanese) keyboard. That seemed to solve the issue, but only if I change to the German keyboard before opening Photoshop. Shortcuts don't work in CS5 anymore either unless I do. Sometimes the shortcuts also stop working a while after I change back to the Kotoeri keyboard.
    Now I would like to know if there is any way to get around this issue. Isn't there a way to get my shortcuts working again without constantly having to change keyboards? I much prefer the Kotoeri one since the icon for the German keyboard in my menu bar looks extremely obnoxious, in my opinion. It's mostly a cosmetic thing to me, but I would love to get everything back to the way it was before.
    I'd much appreciate any advice or help.

    I am having a similar problem. Just upgraded to Apple Yosemite and all none of my keyboard shortcuts are working in a clean install of Photoshop CS6. Every menu item has some form of the ≠ sign. I've trashed the .plist file, rebuilt permissions, etc. Even basic keyboard commands, like Command-N for NEW or Command-Q for QUIT do not work. In fact, many don't show up in the menu at all. I don't have this issue in InDesign CS6 or Illustrator CS6. Every once in awhile, maybe 1 time out of 20, menus and keyboard shortcuts work properly, but I can't find any pattern.

  • [BIACM0085] Error executing load plan after reverting from LDAP to original security mechanism in BIA 11.1.1.7.1

    We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
    When we select (any) plan that was executed earlier, we get an error:
    [BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
    [BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
    According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
    We already started a trace in WLS, but this does not help us further.
    Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
    Tx,
    Luc

    We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
    When we select (any) plan that was executed earlier, we get an error:
    [BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
    [BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
    According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
    We already started a trace in WLS, but this does not help us further.
    Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
    Tx,
    Luc

  • Wifi won't connect to WPA2 network after waking from sleep, requires reboot

    My office has a WPA2 network that I use my MBP to connect to. When I go home for the day, I close the MBP and put it to sleep. When I get home and open it, it automatically connects to my home wifi network. I do the same coming back to work and when it wakes up it shows a connection to the wifi network, but whenever I initially do any network task, the connection drops and I am unable to connect until I reboot my mac.
    I've tried turning off the wifi before sleeping, then turning it back on, but it does the same thing.
    Any ideas?

    Hi,
    I'm thinking about a trouble with the route table. Try this in a terminal session after startup:
    netstart -rn
    ping <network address>
    After somes answer, close the cover to go to sleep mode.
    Open the cover and look the result of the ping command
    Normaly you don't have a network
    cancel the ping command and redo the netstat commande
    Normaly some rows are missing in the result (i don' know why)

  • MBA doesn't connect to wifi network after waking from sleep

    I just bought a new MBA 13". More often than not, it fails to connect to my wireless network when it wakes up from sleep. This is annoying to say the least. Any ideas?

    Hi,
    I'm thinking about a trouble with the route table. Try this in a terminal session after startup:
    netstart -rn
    ping <network address>
    After somes answer, close the cover to go to sleep mode.
    Open the cover and look the result of the ping command
    Normaly you don't have a network
    cancel the ping command and redo the netstat commande
    Normaly some rows are missing in the result (i don' know why)

  • AirPort does not auto-connect to existing network after waking from sleep

    ...but I can easily connect it manually. I read the FAQ on this subject and followed the resetting steps in system preferences/network (the procedure was specific for Intel iMacs-but I did it anyway)
    It did not help. The flaw just occurred a couple of days ago, after a year of flawless operation Please help.

    Solved! I trashed the internet connect preference in the library, and it worked!

  • MBA not connecting to network drives after waking from sleep

    I have been having this problem over the past few days. When my lat 2010 MBA wakes from sleep it will not connect to my NAS. If I try to force it too connect finder will crash and I get the cannot find finder.app error -10801. The only way I have been able to get the MBA working is a hard reset. Then all is well until I close the lid and wake it up at some point.
    I was thinking about re-loading SL, but thought I would check here for any thoughts on this problem.
    Thanks
    Jim

    Hi Carl,
    This will fix many problems AND clean up a lot of useless stuff.
    Get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, boot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    One other "Wake" problem... ignore the HW and other symptims because it works in many other situations...
    http://docs.info.apple.com/article.html?artnum=304482

Maybe you are looking for