Issue to send a draft mail

Hello,
I will try to explain my strange problem.
I have a Curve 8310, I decide to forward any email to one or several users, but before sending this mail i'm saving a draft.
When i decide to send this draft i can't do it, the field "SEND" is not available !!
I have tried same action with a Bold 9000 and with a 7280, it works well !
Is there anybody capable to explain me why? And is there a solution ?
Thank you.

Also check out this KB article for how to restore the missing Send command: http://www.blackberry.com/btsc/KB02567
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

From jsff how to send a drafted mail .

I'm using 11g adf.
I have to send a drafted mail to the customers in my application .
I have a master , email master in which i will save the subject ,body content . On submit i have to fire mail to the users in my application
any links or examples
will help more
thanks in advance .

How about http://www.oracle.com/technetwork/java/javamail/index.html
Timo

Issue with sending internal E-Mails(ERMS Demo)

Hi Experts,
I want to implement ERMS.For this, the first step is E-Mails should come to the CRM system.The steps which i followed:-
a) Got a mail-id configured from BASIS team-xyz at abc dot com.
b) Assigned this mail id to my business partner.
c) Created a loopback node in SCOT for testing purpose and send a mail to this mail id.
d)Send a test mail from SCOT->System->Short Message.
Now the issue is I am not able to track that mail.Where is it going? Ideally it should come to the SAP Business Workplace of my Business Partner(Transaction SBWP).Am I missing something here?
Please Help!
Regards,
Rohit

look at these 2 notes, there is a pdf file attached to 940882.
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
from what you mentioned you have a few more steps that are outlined in that message.
[ERMS Overview|
http://service.sap.com/~sapidb/011000358700003326712006E]
[ERMS How-to-Guide|
http://service.sap.com/~sapidb/011000358700003326732006E]

Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail

Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
Not a server problem as all mails are going/receiving fine on my desktop.
Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
Is there an issue with the Windows mail programme running with Vista that is known

I think I have found a solution
Please check this:
Windows Mail will not Send or Receive mails
http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem.

Contact conflict when sending an e-mail from Mac

I would like to address an issue after sending an e-mail from my Mac computer. The contact changes to the previous name that I had given in the past and its being added to the new one. The result is to have a contact with many names.Is there any solution to this problem?
Thank you in advance,
Menelaos

I hadn't realised it was more than one contact.
The following article(s) may help you.
Resolving duplicate contacts

Exchange 2013 issues - (new send email Stuck in Drafts not send)

Exchange 2013 issues - (new send email Stuck in Drafts folder not send)

I am also having this issue.
server 2012 VM with exchange 2013. plenty of resources, more than recommended so cannot be a BAck Pressure issue especially as no clients are connected yet.
In the early stages of setup and testing, mail sent to other mailboxes worked fine in outlook 2007 and OWA but after a few issue that developed and are now resolved, any e-mail send within outlook or OWA just goes straight into the drafts folder.
I tried, DNS setting changes under roles, on the server, on DNS server, MX DNS records, increased resources, looked at received connectors, changed and even deleted send connectors as this is not required for internal mail. Tried changing authentication
types but then outlook won't connect to, staying with Basic Auth.
Have not been able to test inbound e-mail as this is going to replace a production server and is not ready, although I could probably simulate a route from another server and push e-mail to it. Will try tomorrow.
I have spent about 20 hours trying to figure this out and made probably 40 changes. Change, test, rollback etc. Been searching through loads of forums and technet sites all with no help.
All services are started, server has been rebooted several times.
It is also an AD server and has both Exchange roles installed. There is no reason why it should not work. This is so frustrating, we don't have these issues with the now end of life Scalix, or MDaemon or Zimbra. Pity the client wanted a Microsoft solution.
To be honest there are not a lot of things that cannot be changed in ECP although there is more under exchange powershell however I am not familiar with all the commands yet. I have resorted to watching training videos even though I am a seasoned IT Pro, although
not so much with exchange it seems.
I have seen many people have this issue on Exchange 2007, 2010 and 2013. Someone must know how to resolve this or find a work around?
So far I have an expensive solution the client has purchased that I cannot get running properly.
Aside from this issue, I really like the new Server 2012 and new Hyper-V.
I was about to install Exchange Server 2013 on a physical machine due to this f#ckin' issue. But a post for the DNS change has saved my life:
http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/04c0147b-f4e3-4041-a566-310854e71068/ (rafael9908's answer)
And thanks Jesper Bernle for excellent info provided by your link.

For those new to mail with issues sending and receiving mail

I was surprised that I did not see anyone referring to this amazing and invaluable tool, the Mail Setup Assistant:
http://www.apple.com/support/macosx/mailassistant/
This tool get's me through troubleshooting sessions more than anything else. Most problems are due to settings when it comes to Mail. Half the time issues with sending emails is just due to SMTP settings, sometimes you do not need to have Authentication for outgoing mail. Sometimes your password is just incorrect. Use Mail Setup Assistant it is pretty **** accurate I use it on a daily basis.
Sometimes the settings are perfect and sometimes you just have to erase mail completely by doing:
~/library/preferences/com.apple.mail.plist pull.
~ refers to your home folder!
Hope this helps!

It is a very good idea, however many of us do not live in the USA, so cannot yet take advantage of this tool.
Pity!

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

HT2488 How do I create an iCal Alarm to delay send an e-mail in my Drafts folder of Mail?

I've learned how to use iCal Alarm to schedule sending an e-mail. However, all of the instructions I read say that I have to type the e-mail inside the automator's "New Mail Message". Is there a way to type the message in Mail, save it in drafts, and then create an iCal Alarm to schedule sending it?
I got as far as "Get Specified Mail Items" --> "Display Mail Messages". This sequence displayed a message in Drafts. What next to get it to send that message it displayed? I tried adding "Send Outgoing Message" to the sequence with no success. And I tried adding "New Mail Message" --> "Send Outgoing Message" to the sequence with no success.
Sometimes there will be several e-mails I want to delay send (some that I started earlier in the day, saved in Drafts and finished up in the wee hours of the morning) and it seems a waste to have to create a new iCal Alarm for each.
Thank you!

I've learned how to use iCal Alarm to schedule sending an e-mail. However, all of the instructions I read say that I have to type the e-mail inside the automator's "New Mail Message". Is there a way to type the message in Mail, save it in drafts, and then create an iCal Alarm to schedule sending it?
I got as far as "Get Specified Mail Items" --> "Display Mail Messages". This sequence displayed a message in Drafts. What next to get it to send that message it displayed? I tried adding "Send Outgoing Message" to the sequence with no success. And I tried adding "New Mail Message" --> "Send Outgoing Message" to the sequence with no success.
Sometimes there will be several e-mails I want to delay send (some that I started earlier in the day, saved in Drafts and finished up in the wee hours of the morning) and it seems a waste to have to create a new iCal Alarm for each.
Thank you!

Issues with the send to e-mail function in Adobe XI Pro

I have just upgraded from Adobe Acrobat 9 Pro to Adobe Acrobat XI Pro and have run into a very strange issue. When on a web page with an embedded PDF document, I click the "Send to E-mail" icon and select "Send a Copy". A new e-mail is created, but a file called "PDVView" is attached and not the intended PDF document. This used to work just fine in Adobe Acrobat 9. Any help is much appreciated!

You can select the text and using hyperlink option ,link that to your email.
If you have already done this but its not working, please provide the site url where you have inserted the email.
Thanks,
Sanjit

Issues in sending e-mail from FDM

Hi Experts,
I am working on FDM v 11.1.1.3, windows 2003 SP2, IIS 6.0 and I am trying to send an e-mail using the Send Mail accelerator and following is the code:
'Define variables etc.
strFromAddress = DW.Security.fUserEmailGet(DW.Connection.PstrUserID)
strToAddress = "[email protected]" '"YourToAddress"
strSubject = "Import Failed" '"YourSubjectLine"
strEmailMsgLine = "The import process has failed." '"YourMessageLine"
strSMTPServer = "smtp.gmail.com"
'CdoSendUsing enumeration-1=use smtp on local machine, 2=use smtp over network
intSendUsing = 1
'SMTP port on server
intSMTPPort = 25
Set objConfig = CreateObject("CDO.Configuration")
With objConfig.Fields
     .Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = intSendUsing
     .Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTPServer
     .Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport")= intSMTPPort
     .Item("http://schemas.microsoft.com/cdo/configuration/smtpconnectiontimeout") = 10
     .Update
End With
'Create CDO message object
Set objMsg = CreateObject("CDO.Message")
'Assign config object to configuration property of message object
Set objMsg.Configuration = objConfig
'Set Message object settings and send mail
With objMsg
     .To = strToAddress
     .From = strFromAddress
     .Subject = strSubject
     .TextBody = strEmailMsgLine
     .Send
End With
'Destroy message objects
Set objMsg = Nothing
Set objConfig = Nothing
When I set 'CdoSendUsing' to 1, an eml file gets generated on the path 'C:\Inetpub\mailroot\Pickup' but I never receive it on my gmail ID. When I set the 'CdoSendUsing' to 2, I get an error on the .Send line saying 'The server rejected the sender address. Server response was 530 5.7.0 must issue a STARTTLS command first'. I also checked the MetaBase.XML, 'PickupDirectory' is set.
Please suggest where am I going wrong.
Thanks & Regards!

Just to confirm what Tony is saying :
- It's highly unlikely that Google functions as a Mail Relay for SMTP. If it did spammers would have a field day. An open relay is a mail server that will forward emails sent to it from unknown 3rd parties. I'm not familiar with your Google service; however, if they allow any type of mail relaying form you, it is probably secure with at least a login and password so they know it is coming from you. (This would mean when you use the CDONTS object, you'll need to supply a sender login and password)
- The reason why files are accumulating in the Pickup folder is you do not have a running SMTP service that is processing emails on the server that you pointed FDM to. For reference, the following folders are used by your typical SMTP mail service :
* Pickup : Email files waiting to be picked up by the SMTP server for processing (if you open the EML file in a text editor, should be apparent what it is) If the email is meant for an external party, it will be sent to their mail server. If the message is meant for an internal user, gets moved to Drop folder.
* Drop : Incoming messages for local users are stored here
* Queue : Messages that were sent but could not be immediately delivered are placed here. These will be resent at various intervals for a predetermined amount of attempts.
* Badmail : Messages that could not be delivered. Viewing in a text editor should indicate the failure, etc. Senders are not notified of these failures in most cases unless an Admin notifies them based on what is in this folder.
The easiest option here is to install SMTP on the FDM box and call it a day.
* MS Install Instructions for Server 2003 - http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/e4cf06f5-9a36-474b-ba78-3f287a2b88f2.mspx?mfr=true
* MS Configuration information for SMTP on IIS 6.0
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/e4cf06f5-9a36-474b-ba78-3f287a2b88f2.mspx?mfr=true
One NOTE :
- If your company has a mailserver (who doesn't?? :) ), the MX record will be linked to the IP of that machine and not your SMTP box. Certain anti-spam solutions as well as other mail servers might reject your emails as when they perform a reverse lookup, the IP address of your SMTP server will not match that of your MX entry (DNS).
If this happens, you should configure your FDM SMTP server to send its mail to your local mail server and talk to your IT department to make sure all necessary changes are in place. (i.e. you might need to configure Exchange to let your FDM SMTP use it as a mail relay, etc)

Can't send saved draft in Mail

I saved a draft Mail. When I open it to work on it the Cancel and Send buttons are not active and I can't get out of the draft. I have to turn off my iPad and go back into Mail to send the draft or delete it. How do I fix this?

Have you tested bypassing the router connecting direct to the modem?
If not, you need to do so and if the same does not occur when connected direct to the modem, this indicates a problem with the router and you need to check the router manufacturer's website for an available firmware update for the router model targeted at OS X users.
Or try resetting the router and the modem first if you haven't already done so.
Turn off your Mac first. Turn off or unplug the router and then do the same with the modem. Wait 5 minutes. Plug the modem back in allowing it to completely reset and then do the same with the router. Turn on your Mac.

Thunderbird Issue. Thousands of inbound e-mails from "Mail Delivery Failed" from people to whom I've never attempted to send an e-mail.

All inbound e-mails are going directly to "TRASH" how do I fix this? I also have has thousands of inbound e-mails from "MAIL DELIVERY FAILED" involving people to whom I have never attempted to send an e-mail. Whats the cure? I have to use Time Warner as an internet connection and there is a duplicate of about half of what I'm getting in inbound traffic on Thunderbird.

The inbound is Backscatter see http://en.wikipedia.org/wiki/Backscatter_%28email%29
The trash issue is most likely the SPAM tool that comes with your anti virus program. Try disabling the tool in the anti virus suite and see how you get on.

Sending all e-mails out of the draft-folder

Is it possible so send all e-mails in the draftfolders at once? I know is possible with an AVB but do I have to use it also for outlook 2010.
thank u

Hi,
Just as our MVP mentioned, it's not possible to send all email in a folder at once. However, there are some workarounds. For example, we can disable “Send immediately when connected”. To do this, open your Outlook and go to File > Options > Advanced
> Scroll down to the "Send and receive" section. Clear the check box before "Send immediately when connected". Now, all sent items will stay in Outbox and Outlook will
only send messages during the scheduled send/receive interval (for instance, every 30 minutes).
For more information, please refer:
http://www.msoutlook.info/question/181
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

From mac mail, I can send but not receive mail. Also, on the same mac, I can run mail through Entourage and no issues with sending or receiving

only found this problem with mac mail , when new hard drive waqs installed!!
i CAN SEND from mac mail
When I first set it up, i could receive mail but not send and now its the other way around
I cannot receive mail.
However, under Entourage mail, i have not problems with similar settings!!
Can you help, this is wrecking my head!!

What do you see if you invoke Mail's menu option Window > Connection Doctor?

Issue to send a draft mail

Similar Messages

Maybe you are looking for