Issue when 2 consolidation group hierarchies used in one single query

Dear experts,
I have an issue.
I need to build a query where we compare our forecast data (figures for year end 12.2009) to our plan 2010 data.
The problem is that we changed (in our consolidation system SEM BCS) our consolidation group hierarchy for next year only , (for the plan : the change has been done from march 2010 on the version P1 used for the plan)
Ex :
In forecast the structure is as below :
We have a zone France/Spain/Portugal that includes :
1. the business unit France 1 and the business unit includes the french company AFrench company Bfrench company C
2. the business unit France 2 with french companies D, E.
3. the business Unit Spain : with spanish company A, B C etc.
4.The business Unit Portugal : with portuguese company A, B, C etc.
Our Plan conso group hierarch is as below :
We have a zone FRANCE (France/Spain/Portugal does not exit anymore) that includes :
1. the Business unit France 1 with french Companies A, B and C
2. the BU France 2 with french companies D, E
In my query i want to compare a business unit profit and Loss Forecast Versus Plan.
If i select as a consolidation group, exemple the business unit France 1 (which no longer has the same Zone above but still exists in the hierarchy), I have the following error message :
"BW server error
Exception condition : "HIERARCHY NOT FOUND" raised."
My consolidation group characteristic is set up in both columns (forecast and Plan) with a hierarchy node variable based on the right hierarchy version and the right hierarchy key date, that is why i am now lost...
I have a doubt regarding the feasability of such query...
Many thanks in advance!!
Armelle

Thanks very much for your quick answer Naveen.
Actually i saw with our technical team yesterday that we may have an issue when creating a new conso group hierarchy
SAP note 957506
This problem is caused by program error in the CL_RRHI_INCL_CREATOR_TID class.
The error can occur if a hierarchy contains new characteristic values and if additional hierarchies for the characteristic are activated simultaneously.
We may need a support package to solve this.
As you said, both hierarchies are based on the same characteristic.
I understand that we need pro forma presentation to compare our figures.
But we always ask for Business units level figures, and the BUs level did not change, only the zones level.
Anyway i am blocked for the moment, since nothing can work with this program error (even all my old queries for which the consolidation group is mandatory).
I leave my question opened and will let you know if everything worked (or not) as I had expected.

Similar Messages

Some issues when consuming RFC2 model using WebDynpro Java CE 7.11

Hi Experts ,
I'm using Web Dynpro for Java to develop our project. I have issues when I use RFC 2 model to call BAPI function . I already create the RFC 2 model successfully to call one PO BAPI function --- BAPI_PO_GETDETAIL. The whole project build and deploy successfully. At run time, it will call the execute() function of the model object. It also works fine and get the return values.
I just want to get two return objects : PO_Items and PO_Item_Schedules .
So far, every thing works fine. But when I want to iterate the PO_Items node and get each property value of current element, the following error occurs :
com.sap.tc.cm.base.exception.BaseModelRuntimeException: Class 'java.lang.String' of new attribute value is not assignment compatible for attribute 'Prnt_Price' of type 'boolean' in model class 'com.sap.demo.localwd.qaspomodel.Bapiekpo'
    at com.sap.tc.cm.base.model.BaseGenericModelClass.setAttributeValue(BaseGenericModelClass.java:306)
    at com.sap.tc.cm.arfc2.model.ARFC2GenericModelClass.unmarshalFromJCoRecord(ARFC2GenericModelClass.java:287)
    at com.sap.tc.cm.arfc2.model.ARFC2ModelObjectCollection.doUnMarshalAt(ARFC2ModelObjectCollection.java:97)
    at com.sap.tc.cm.arfc2.model.ARFC2ModelObjectCollection.get(ARFC2ModelObjectCollection.java:120)
    at com.sap.tc.webdynpro.progmodel.context.ModelElementList.getElement(ElementList.java:1726)
    ... 72 more
I use the same way to iterate PO_Item_Schedules element. It also works fine. Therefore, I don't know why this error happens?

Hi Experts,
I continue this thread because it seems that I have the same problem as the one asked by Wester Wei.
I'm developping an application on NWDS using CE 7.11 (I've learned RFC2 with the tutorial [here|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0b102ea-efff-2b10-b3aa-d9e84a2c6bb6?overridelayout=true] ). The problem seems to come from the RFC2 Model, but I just import it (and I can't modify it afterwards, because it is a read-only model).
So, you advise to "declare one boolean variable and assign Prnt_Price to that variable." or to "Explicity convert boolean to string.", I think you are right, but I don't know how to do that in my app (in the component controller ?). Therefore, the attribute that occurs the problem is in the context outputs, to I don't know I will be able to affect it before calling the BAPI.
Could you tell me how to fix this problem without modifying the model (because it's read-only) ?
Thank you for advance,
Louis

Issue when i try to use IMMCP3.

I have changed the existing values of a WBS in CJ40 & made one of the WBS value to ZERO. But when i try to use IMCCP3 the value of ZERO WBS is not getting copied to the Budget but instead it is showing the Previuos values.
Before Changing the values in CJ40.
WBS A - 16000
WBS B - 0
WBS C - 0
After changing Values in CJ40
WBS A - 0
WBS B - 8800
WBS C - 7200
After Executing the IMCCP3 the WBS with ZERO is not getting updated....i have seen the Budget Reports. It shows as
WBS A - 16000
WBS B - 8800
WBS C - 7200
Please help me in getting rid of this 16000 value in the WBS.... Thanks

Hi,
When you used 1st time IMCCP3 the plan value become your budger for WBS A as 16000.
When you Chnaged Plan Value For as
WBS A - 0
WBS B - 8800
WBS C - 7200
and run IMCCP3 , the sytem takes that there is no value to transfer for WBS A, there is only Value for WBS B and WBS C.
at that time Your already budget value remain unchanged aas 16000.
IF you dont have to budget for WBS A as 16000, then remove budget by using cj38 from WBS A.
Thanks

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

OAM- Apache Reverse Proxy issue when Form Authenticaion is used

Hi All,
Customer is using Apache 2.0.65 as a reverse proxy server. OAM has been integrated with OAS. A WebGate has been installed on OHS in infra.
When a protected resource (portal) is accessed, a login form appears. After entering the correct credentials, it does not go to the resource, instead gives displays some Header Variables on the Browser, instead of actual resource.
This happens only when a resource is protected with Form Authentication Scheme and while using with reverse proxy. The same Form Authentication scheme works without reverse proxy. With Basic LDAP Authentication, the same resource perfectly works even when reverse proxy is used.
Any suggestions?
Thanks in advance.
Regards,
Amol

Hi Amol,
Check the passthrough parameter in your form scheme. If this is set to yes, what you are asking OAM to do is to pass through to the form action instead of the URL the user originally requested. I know this still does not explain why things work when the reverse proxy is not used - but it might make sense if you actually have 2 form schemes and when you access the resource via the reverse proxy, the policy domain/policy in question actually invokes the scheme which has passthrough enabled. You could ascertain this via the access tester by trying the reverse-proxied URL and direct URL.
-Vinod

Consolidation Group get assigned to unassigned in Query

Hi,
when i check the list cube i get the consolidation group assigned correctly based on cons unit,but when i execute the query the consolidation group fields shows as unassigned.
Can anyone help me out,this is critical.
Regards,
Subha

could resolev it on my own

How to make the query in one single query? No Union please....

Hi,
I have sets of around 18 queries which is finding counts in many scenarios. I wanted to have a single query for this. which diplays the result in a single row.Is there a way , I heared analytical functions are good options ,but I am new to Oracle . Please help me.
select count(*) total_count from emp; --100
select coun(*) MGR_count from emp where job='MGR'-- 10
select count(*) dept_count from emp where deptno in(10 ,20)-- 75
output..
TOTAL_COUNT     MGR_COUNT      DEPT_COUNT
100                                   10             75
Thanks

This:
select count(*) total_Count
      ,count(decode(job,'MGR',1,null)) mgr_count
      ,count(case when deptno in (10,20) then
               1
             else
               null
             end
            ) dept_count
from emp;
untested

Issues when embedding several subtitles languages in one file - bug?

Dear people
I have added subtitles to a couple of shorts ripped from DVDs and embedded the .srt (sometimes one, sometimes several) using Subler into the m4v.
The results are:
* I can select all the subtitles in iTunes on my Mac, as expected
* on the iPad I can't select subtitles at all (if there are more than one), and I just can see the last selected language I've used in iTunes
Is this a known bug? or a feature? or there is anything I can do?
Luis

Post Author: nan
CA Forum: Exporting
Hi synapsevampire, thanks for replying. synapsevampire:- Even though i've used Tahoma size 11 fonts, when i open the document in MSWord 2000, they have a size of 10.5.
Same here, I changed it to a Tahoma 11.5 and it results in size 11... Well, i guess it's a bug then. I hope something will be done about it before i have to change all of my reports... synapsevampire: So i guess it's a bug then. I hope it gets corrected before i have to change all reports...
- In the exported file, the "line spacing" setting i have set to "exact 16" is ignored and set to the default "single spacing". This happened in CR 8.5 too.
No surprise there, as those are settings within Crystal, not Word. Very few programatic features are exported to any other format, it just emulates them. I wonder why is that. It shouldn't be that difficult to pass these settings to word. Anyway... synapsevampire:
- Moving textboxes around from one page to another and then saving and reoppening, sometimes causes MSWord to delete all text from the document. I cannot be sure if this is an issue of MSWord or CR XI but i'm reporting it just in case...
Ummm, moving textboxes while in Word you mean? That would be a Word issue. I thought of that too, that's why i tried out the Editable RTF format which was a major dissapointment with the way it handles (or rather does not handle) paragraphs. I really hope something can be done about it because it's a very convenient format, for me at least.

"Totals calculation issue" when I filter member used in an scope calculation with descendant aggregation

Hello everybody
I have a Geography dimension (Country -> State -> City) and 2 related Fact Tables: "Revenues" (with measure Revenue) and "Revenue Goal" (with measure Revenue Goal) and created a dummy measure into the Revenue Fact table
(in the dsv) to calculate the Revenue not planed (by city) using Scope.
The calculated measure "NotPlannedRevenue" is defined using a Dummy measure on the Revenue FacTable with null like default value, later using Scope I have calculated the values in order to get correctly Totals Values over the a Geography hierarchy
which is working properly. The MDX script for the measure is
SCOPE([Measures].[NotPlannedRevenue]);
SCOPE ([Geography].[GeoHier].[City].Members);
THIS=iif([Measures].[Revenue Goal]=0 , [Measures].[Revenue] ,0 );
END SCOPE;
SCOPE( [Geography].City.[All]);
This =sum( Descendants([Geography].[GeoHier].CurrentMember,,LEAVES),[Measures].[NotPlannedRevenue]);
END SCOPE;
SCOPE( [Geography].State.[All]);
This =sum( Descendants([Geography].[GeoHier].CurrentMember,,LEAVES),[Measures].[NotPlannedRevenue]);
END SCOPE;
END SCOPE;
When I check the data, I get "Totals" well calculated.
The issue is when I filter Cities from the Geography dimension, the total values are not being calculated using only the selected cities. I have problems in the totals by City, State, Country.
The total for the State "Karnatak" must by "0" and the grand total must be "10".
Please someone could help me to solve the way which I must write this MDX or maybe I have to use another strategy.
Thanks in advanced.
Gelder de la Ossa

You shouldn't need the second and third SCOPE statements (on the All members of City and Country) if the first one has been configured correctly - what happens if you remove them?
Chris
Check out my MS BI blog I also do
SSAS, PowerPivot, MDX and DAX consultancy
and run public SQL Server and BI training courses in the UK

Full screen issue when utilizing Ease of Use on screen keyboard and RDP in Win8.1

Hello,
I am exploring using touch technology with our point of sale application which is delivered to our clients using RDP. The default touch keyboard in Win8 is basically useless for our application so we enabled the touch keyboard under Ease of Use (EoU)
which does meet our requirements. We enabled the KB in docked mode so it is always displayed and locked to the bottom of the display. The issue is that when we start an RDP session in full screen mode, the RDP session is using the whole screen
and slipping under the docked EoU KB. Is there a means to have RDP recognize the reduced screen size with the EoU KB docked and only use the available screen real estate? I understand that I can configure the RDP settings manually and approximate
what I'm looking for but this drops the session into a window which is somethibg I'm looking to avoid.

Hi Steve,
Thank you for post in Windows Server Forum.
As per my research, I can say that you need to set the RDP screen size manually. So after setting the size of Full screen RDP you can able to use. You can also try to switch the application in Remote Desktop connection by “Ctrl+Alt+Break”. Please check
the shortcut to be used when using RDC.
Keyboard shortcuts
http://windows.microsoft.com/en-in/windows/keyboard-shortcuts#keyboard-shortcuts=windows-8
Hope it helps!
Thanks,
Dharmesh

Subcontract PO item withdrawal issue when alternative BOM item used

Hi,
As title mentioned, when we issue alternative material for a subcontract PO in BOM, but it still shows the quantity from primary item.
(For example, we have a product, let's say it as Product-A, it's combined by material-B1 and Material-C1
And the BOM for Product-A for item material-B1 has an alternative item, material-B2
Now the issue is when we issue material-B2 instead B1, but the PO usage/withdrawal listed in B1)
Because we are making a list for China custom for material usage, the issue listed above makes our list not available for custom department.
Please let us know how we could make the withdrawal in PO shows B2.
thanks,
Steven

Dear Steven,
As explained by our forum friend maintain this data.
1.Create 2 different BOM for the same header material with the respective BOM components.
2.Create production version for the header material using T COde MM02--->MRP4 view and click on prod.version,enter the same
as 0001,text as prod version 1,default valid from date will be the current date and the valid to date will be 31.12.9999.
3.Enter the lot size for which this prod version is valid and then in the alternative BOM select the BOM and save the data.
4.Prdo.version can also be maintained through C223.
5.Assign this prod version in the sub-contracting purchase info record in ME11,under prod version under purch org data(not sure
check this alone).
6.Likewise assign the prod version that is linked to the BOM to be picked for each sub-contracting vendor.
Check the results after MRP and revert.
Regards
S Mangalraj

Anyone else having issues when streaming from veetle using safari over wifi?

I like many others have been having issues with my wifi on my iPhone 5 (sometimes when connected to wifi it just freezes up and I need to do a reboot or reset network settings to get it back up and running). In any case, that wasn't bothering me too much but I've noticed now that the veetle web site that I use sometimes to stream shows from on my iPhone stops showing video after a few seconds when using wifi. If i switch to my LTE connection or 3G it works fine but it's only when running with wifi that it has a problem. It will begin to stream a show properly then after a few seconds the video will cut out though the sound keeps playing. My iPad doesn't exhibit the same problems and can stream from veetle perfectly over my wifi. Anyone else out there having similar issues? This will be annoying if i'm travelling out the country and depending solely on wifi for my data and not being able to stream sports and tv shows from Veetle. Just wanted to see how commonplace this problem was. Thanks

All spring and summer Netflix/fios has been a problem. I have used a tool that goes beyond simple speed tests and gets to dividing up thE problem. It appears that the problems reside with fios, however true to form Verizon repair denies any problem (go figure) .

Syncing Issues when trying too sync more than one thing

since the 8.0.2 update syncing has been real glitchy for me lately when i try too sync my iphone and ipod. for whatever reason, i cant sync more than one thing at the same time. for example if i have my iphone still plugged in, then plug in my ipod too update it, soon after the itunes would give me a unknown error then lock up. specifically this error. http://img407.imageshack.us/my.php?image=unknownituneserrorjq3.jpg
sometimes it would say iphone, sometimes it would say ipod.. that error would just depend on which was plugged in first.
its just weird, windows detects both drives fine. and if i have them in one at a time itunes will be able to read and sync that device. unless this is a direct problem with my computer which i dont think, i dunno. both devices work in any usb port. it just doesnt like them both being in at the same time.
this happening with anyone else?

See this support doc, iPod for Windows: Only works with one iPod at a time. The title pretty much says it all. If it's worked for you before then it's more likely by luck than design.
tt2

Issue when opening new windows using JSF CommandLink

Hi,
I'm opening this thread to follow up on a topic posted on the old Sun Developer Forum: http://forums.sun.com/thread.jspa?threadID=5435239 . That post was never answered and I am having the same problem.
To summarize (and I'll quote from the original post):
"I am having an issue where when I open a page in a new window from a link in my primary window any button or link clicked on the primary window after that opens a new window."
"Any other actions on the primary page should keep navigation within the primary window. This issue does not start occurring until after the desired new window is opened the first time."
Anyone has run into this problem and found a solution?
Marc

This is the command link code that, once this gets called, anything else on the page will open this window again:
<h:commandLink immediate="true" styleClass="commandLink" target="_blank" style="text-decoration:none"
            id="pdfLink action="#{Bean.method}">
     <hx:graphicImageEx id="imageEx2" styleClass="graphicImageEx" value="../images/pdfButton.gif">
     </hx:graphicImageEx>
</h:commandLink>

SET UPDATE CASE WHEN HAVING GROUP BY all in one

I'm a little stuck with the code below that doesn't work.
Basically in my table i return 3 rows per Name and they should all have the same location too, e.g. 3 Davids and 3 USA. But sometimes I might have 3 Davids and 2 USA and 1 EU - so in this case I need to update a new column called SplitValue
and enter something like 1 or 0 depending on whether the name has 3 locations that are the same, just so we can report on it.
WITH cte AS (
SELECT name, location,
CASE WHEN [Location] < 2
THEN 'split'
ELSE 'NO Split'
END AS [SplitValue]
FROM [dbo].[Names]
GROUP BY name, location HAVING COUNT(location) < 2
UPDATE [dbo].[Names]
SET [Split] = cte.[splitvalue]

You're almost there. Try this.
-- SETTING UP SOME TEST DATA TO MIMIC YOUR SOURCE DATA
DECLARE @Names TABLE (name varchar(30), location varchar(30), split varchar(10))
INSERT @Names (name, location) VALUES
('David', 'USA'), ('David', 'USA'), ('David', 'USA'),
('Bob', 'USA'), ('Bob', 'USA'), ('Bob', 'EU'),
('Jane', 'AUS'), ('Jane', 'USA'), ('Jane', 'EU'),
('Alex', 'EU'), ('Alex', 'EU'), ('Alex', 'EU')
;WITH NamesLocationGroups AS
SELECT name
,location
,CASE WHEN COUNT(*) < 2 THEN 'split'
ELSE 'NO Split'
END as splitvalue
FROM @Names
GROUP BY name
,location
UPDATE A SET A.split = B.splitvalue
FROM @Names A
JOIN NamesLocationGroups B
ON A.name = B.name
AND A.location = B.location
SELECT *
FROM @Names
Results will look like this:
name                           location
split
David                          USA
NO Split
David                          USA
NO Split
David                          USA
NO Split
Bob                            USA
NO Split
Bob                            USA
NO Split
Bob                            EU
split
Jane                           AUS
split
Jane                           USA
split
Jane                           EU
split
Alex                           EU
NO Split
Alex                           EU
NO Split
Alex                           EU
NO Split

Issue when 2 consolidation group hierarchies used in one single query

Similar Messages

Maybe you are looking for