Issue when installing xp on a T60

Hi Dudes !
One day, when booting my T60, I got a blue screen; i tried many things to fix this problem, but nothing worked. So i formatted the inside hd (on another PC), deleting the hidden parttion, i set the bios in compatibiltiy (ide) mode and i started to install xp sp2 with my xp CD. It began well, the installator starting to write the xp files on the hd, but when the laptop rebooted, dark screen (just the cursor) and blocked. Why ? What must i do ?
Thanks a lot.
h.v.r.
Solved!
Go to Solution.

Hello,
In addition to testing the ThinkPad T60 by booting from a Linux Live CD, you might want to try the Linux-based Lenovo Bootable Diagnostics disc. While it is actually designed to test newer ThinkPads than the T60, perhaps it will be able to examine the T60's hardware for errors.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Issues when installing apps

I have issues when istalling apps that I purchased of free apps that end on *.sys. Can someone help me to determine? It downloads the app but when installing gives me an "installation error" message. I checked configurations and it should allow me to install any app on the phone. Any toughts? Any one that can help me, please? This is a Nokia N8.

Hello,
No this had never occured the same way in CS6, Other instances of this have occured with CS6 like not being able to open PSD's in AE. But nothing where the Dynmaic Link manager would stop working.
I realize this issue is caused by my storgae setup becuase as I stated above, when I create a new win7 user and luanched the CC Apps( After Effects, Premirere Pro, Photoshop). they work fine. ( this is becuase the user profile for the user remains on the C: drive)
Where as my main user for my machine differs, in that the user profile exists on my D: drive ( for sake of capacity )
All of the Apps work fine with the new user and user profile on the C: drive, but this is not really an option for me as the SSD im using will not be able to store my large amount of user files ( documents, downloads, appdata, pictures, etc.. )
-Schoolpost

Issues when installing Windows XP on a PXI-8108 with a Solid State HDD

Hi,
I have been assisting a client with installing Windows XP onto a PXI-8108 controller. They have replaced the default HDD with a solid-state HD.
We have attempted to run the System Recovery CD. The recovery part works fine, ie. you select Acronis, it unzips all the files to C drive.
However when it gets up to the bit where Win XP Setup starts (after rebooting once the Recovery section completes), we have issues.
It can't find files, ie. dmconfig.dll, gm.dls, etc on the Win XP CD. When it tries to find mfc40u.dll, it came up with an error:
"The file Setup placed on your hard drive is not a valid Win XP System image. If you are installing from a CD, there may be a problem with the Windows XP CD."
We have tried two different recovery CDs, and we even tried just a plain Win XP CD. All had similar issues.
We have tried different SATA settings in the BIOS - both IDE AND AHCI.
It may just be that we have a faulty SSD, however it seemed to work ok when we had it connected to the PXI via USB (with the default HDD still in place). I was able to run diskcheck, which did not bring up any errors. Disk Management showed things were healthy.
So what I would like to know, is if there is any issue with a PXI-8108, and SSDs? We have successfully performed this operation a few months back using the same brand of SDD, but with a PXI-8104.
Any suggestions would be much appreciated!
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au

This is more than likely a failing disk. SSDs don't always report failures in the same way as a rotating drive. Also, the tools that are helpful with diagnosing rotating drive failures don't always work with SSDs.
From the thread, it sounds like you have another system with this same SSD and it is working properly. Does that system have the same PXI Controller and Chassis?
I have seen these types of errors if the media for the OS installation is corrupt, but it sounds like you have tried different CDs.
I realize you have limited access to this drive, but here are my recommendations:
1) Put the failing SSD in a different system (desktop is preferable), and install a base version of XP. If this fails, RMA the drive, they normally have 3-5 warranties.
2) Run Crystal Mark Info and check for SMART failures:
http://crystalmark.info/software/CrystalDiskInfo/index-e.html
3) You can securely erase the SSD, which is not for the faint of heart. This will restore the drive to a new condition. If the drive has a bad cell which is causing data corruption during the OS install, securely erasing the drive will hopefully cause the firmware to map out the bad areas. This is a good tutorial, just ignore that fact that it is targeted at Intel drives.
http://www.iishacks.com/2009/06/30/how-to-secure-erase-reset-an-intel-solid-state-drive-ssd/
I hope this helps out,
Regards,
Andrew Mierau
Project Engineer - Servers & RAID Storage
National Instruments

R5K Sound issues when installing Windows 8.1

Hello everyone
I installed Windows 8.1 Pro as downloaded. I used BCA > USB on my R5K to install Windows.. (Boot Camp drivers via BCA as well). Everything works fine except the sound when using Windows. There is sound, but it all... sounds disturbing, like listening to a radio. Nothing like the sound quality when using OS X, no epic sound effects and crystals clear sound whatsoever. And I think it's not even using all the speakers at the bottom of the iMac when producing the audio. I tried playing with Sound setting in Control Panned, with the audio settings in MPC, VLC, iTunes, re-installed the drivers just to be sure nothing went wrong with the installation and nothing work, I am still getting that "crappy sound quality"...
I am welcome to any suggestions, spend half a day just trying to fix this... Thank you in advance

Does Apple Diagnostics indicate any hardware issues?
Using Apple Diagnostics - Apple Support
Apple Diagnostics: Reference codes - Apple Support
Do you get proper sound on the OSX side?

Issues when installing Hyper-V Platform with 8 network filters running

Hi. This isn't so much a question as a solution in case anyone else has this problem.
I tried to install Hyper-V Platform on Windows 8.1 Pro but it kept undoing changes after 93%.
I had it previously installed on the same hardware so knew there weren't any limitations there. Some forums suggested running "Dism /Online /Cleanup-Image /ScanHealth" followed by "Dism /Online /Cleanup-Image /RestoreHealth" but this
made no difference.
Eventually, I looked up a forums that suggested "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\MaxNumFilters" had to be set if a maximum of 8 filters were in use. So I created a DWORD entry with a value
of 14 (maximum on previous Windows versions) but it still didn't work!
I checked how many networks filter were active with this powershell script:
get-itemproperty hklm:\SYSTEM\CurrentControlSet\Control\Network | format-list -property MaxNumFilters
$children = get-childitem -path hklm:\system\currentcontrolset\control\network\"{4d36e974-e325-11ce-bfc1-08002be10318}" | get-childitem | where-object {$_.PSChildName -eq "Ndi"} | get-itemproperty | where-object {$_.FilterClass} |get-itemproperty -name FilterClass
"Filter Count: " + $children.count
"Filter List: "
$children | foreach-object -process { get-itemproperty -path $_.PSParentPath } | format-list -property Description,PSPath
Still 8 were active! I then read that Windows 8.1 should scale MaxNumFilters automatically so I removed MaxNumFilters from the registry. Finally, I uninstalled my Anti-Virus (Kaspersky in my case) then tried installing Hyper-V platform again and it worked!
After that, I ran the powershell script again and it detected that 9 filters were running. It looks like a bug whereby Windows is not scaling up the MaxNumFilters properly when Hyper-V platform is installed.
This might only be an issue with Kaspersky and/or if exactly 8 filters are running but I imagine there are many more conditions under which this might occur.

Hello ZXCallum,
Thanks for your sharing.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

VBScript issue when installing

I get a message when i try to install the new iTunes and it says
iTunes could not be installed because Visual Basic Script (VBScript) Is not installed or has been disabled. Make sure VBScript is installed, turn off script blocking in anti-virus and personal firewall software, re-register VBScript, and hten install iTunes.
Could sombody please help me, i dont have any Anti-Virus software, and my built in firewall isisnt blocking it.
If you have a solution could you pleas eMail it to me at [email protected] or message me on aim at Dylanx92
Okay, thanks.

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Issues when installing SAP IK FP1 and FP2

Hi all,
has anybody installed the SAP IK 3.0 FP1 and FP2? If so, after installing it, were you able to load the cmc page and infoview page in internet explorer.
I get an error when typying the url:
Estado HTTP 404 - /PartnerPlatformService/service/app/logon.do
type Informe de estado
message /PartnerPlatformService/service/app/logon.do
description The requires resource (/PartnerPlatformService/service/app/logon.do) is not available
Apache Tomcat/5.5.20
seems like the deploy of the applications did not run properly.
I have done it a couple of times and the same error.
Anyone has any idea?
Thanks a lot

Hi Luis,
first a couple of things that you must take into account.
- I have installed the FP1 and FP2 just to see if I could an issue with the SAP IK. After doing that I realized that some things got
solved but other did not. So I uninstalled the FP.
- If you just need to install the FP to solve a different issue, you can try by leaving the service name blank (I have not tested that) or
if you fill that information, you can redeploy manually the PartnersPlaformService from tomcat. That way it works
I hope this helps
Regards

Serial issue when install adobe again when old hard disk damage.

Hi, I have installed adobe creative suite 5.5 design premium in my computer. But recently, my hard disk damaged and I switch to new computer. However, when I reinstall the adobe, the serial Number doesn't work anymore. Can anyone suggest how to activate the software as my old hard disk cannot use anymore.

For serial number issues, you'll need to contact Adobe Customer Support in your region. We can't answer serial number issues here, unfortunately.

Leopard Issues When Installing

Hello
I don't know if I'm in the right location for this question regarding the new OS Leopard. But maybe you can direct me to the correct location.
I have five customers who upgraded from Tiger to Leopard OS 10.5; after they upgraded their OS they weren't able to login using their admin password. Even when they setup a login account their password (admin password) wouldn't work. I tried to reset the password from the boot-up CD of Leopard but that didn't work either. I asked my customers if they did an Archive Clean install and preserve preferences and network settings, or did they do an Upgrade? All of them told me they did an upgrade. I tried to do an Archive Clean install preserve network settings but after the install still couldn't login using the customer's admin password. Later I found out that the Application Extender got tweaked and changed the settings in the Admin Password where you can't login. What I want to know from this group is, how does this happen and what should the client do when upgrading their OS to 10.5? Why did the Application Extender tweak the Admin Password?
Please let me know your thoughts.
Thank you
Phil

Best is a slippery issue as it depends on how your systems are set up and what's going to be the most acceptable of tradeoff between effort and risk. There's one issue with groups on Leopard; a group in Tiger doesn't exist in Leopard, so Upgrade and A&I installations can leave some permissions set to an "unknown" group to which some people have attributed Finder problems. The only way to avoid this at present seems to be to back up all the user data, do an Erase & Install, set up the user accounts fresh, and copy back the user documents and reset preferences. That's obviously a lot of work and I don't know how much that permissions issue really affects (there's been a lot of discussion about it, but I haven't seen any definitive proof that it causes the problems attributed to it, though it well might), but that's the cleanest way to install Leopard (or for that matter, any OS).
You'll have to decide what the most time-effective route is for your users. I'd suggest at least that you have them verify Leopard compatibility with all of their apps and drivers and remove them before attempting any Upgrade or A&I installation (an A&I installation, since it preserves apps and many drivers, would not be a reliable way around issues of incompatible software). Then they can either do the Upgrade or the A&I installation. Note that Upgrade should not be used if the user's system was exhibiting any problems with the existing OS; in such a case, the Upgrade can just magnify the problem.
Regards.

BTARN 2013 issue when Installing Runtime

I have installed BizTalk Server 2013 and are in the process of installing RosettaNet 2013 on the server. The RosettaNet installed the WebApps with no issues but the Runtime will not install. Looking though the log I see this error:
[2014-08-08 13:02:02:0460 Info ConfigHelper] <server>\Administrator is member of Group: BizTalk Isolated Host Users.
[2014-08-08 13:02:02:0464 Info ConfigHelper] <server>\Administrator is member of Group: BizTalk Application Users.
[2014-08-08 13:02:02:0465 Info ConfigHelper] Detected IIS version: 8
[2014-08-08 13:02:02:0467 Info ConfigHelper] Application pool BTARNHttpReceivePool already exists!
[2014-08-08 13:02:02:0469 Error ConfigHelper] Failed to add member <server>\Administrator to NT Group IIS_WPG Error code: -2147022676
[2014-08-08 13:02:02:0469 Error ConfigHelper] The group name could not be found.
[2014-08-08 13:02:02:0471 Error RNConfig] c:\depot\europar5\private\europa_source\btarnconfig\dll\rnconfig.cpp(1316): FAILED hr = 800708ac
[2014-08-08 13:02:02:0471 Error RNConfig] Leaving function: CRNConfig::ConfigureFeature
As you can see it is trying to add the Adminstrator to the IIS_WPG. Well IIS_WPG does not exist in IIS 8.0 it is now IIS_IUSRS so RosettaNet will not install because of this issue. How do I get it to see the right IIS group and finish the RosettaNet
Runtime install.

Hi Justin,
I would not worry too much about the name “IIS_WPG”
as it is changed to “IS_IUSRS” from IIS 7 onwards and I have seen some Microsoft
log string not been updated when the product has been updated. Many times log strings use the same string even though the actual product is been updated.
Looking at the error, I would recheck the software requirement for BTARN 2013 with yours. If the software matches the requirements, then try the followings:
Based on the error log it seems that, the step failed while adding the
<server>\Administrator to IS_IUSRS (IIS_WPG’s equivalent in IIS 8.0 ignoring the IIS_WPG used in log) check whether the group IS_IUSRS exists and rerun the installation
again.
Try adding the <server>\Administrator to IS_IUSRS as msi tried and failed.Do it manually and rerun the installation again.
If it fails again then create windows group named
“IIS_WPG”
make its member of “IS_IUSRS”. Just create a group in the name as expected by the installation
and run the installation again, hopefully now since msi could find a name “IIS_WPG”
(though its irrelevant to IIS 8), the installation for runtime might work.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

No bootable device issue when installing Win 7 Pro 64 with OSX 10.8.3

Trying to install Win 7 Pro 64 on brand new iMac running 10.8.3.
Using external LaCie optical drive to read Win 7 OEM DVD installer.
Using Bootcamps Assistant, I can create the Windows partition but then when the iMac restarts to insatll Windows, I get a black screen with the message No Bootable device found.
Seems the iMac is not able to boot from the LaCie external drive.
Have tested the LaCie on both a mac and a PC and it works fine.
This iMac can see the drive and its contents in OSX but can't seem to boot to it to install Win 7.
How do I get a round this?
I have done dozens of dual boots using bootcamp but all with Macs that have built in optical drives. Have never had this much trouble.

I just got this working - finally!
My solution was to download the Win7 ISO file from microsoft and then use BootCamp Assistant to create a USB ISO. From there, I was able to boot to that "disk" and install Windows. I read a variety of posts some saying that you cannot use an external DVD drive, others saying that you could but it had to be an Apple SuperDrive. In any case, the ISO download worked and I would recommend that approach.

App issue when installing iOS 4.3 update

I installed 4.3 today, and at the very final step it threw an error message. I had to reconnect the ipod, restore it to factory settings, and restore it to a backup.
The backup didn't have my apps or music in it, so I called Apple's support line and they were kind enough to re-initialize a download of all apps and music.
I opened itunes on my ipod, and it immediately showed all my old apps, in the "paused" mode (as in, paused from download)
Now, I had downloaded a fair number of apps over all time, and had more than could be displayed on the few home screens.
I've downloaded all visible apps and organized them into folders. My problem is that there are now still many apps offscreen in the "paused" state, which is sort of an interstitial state between not existing on the device and downloading.
I am aware that you can reboot the device to show all offscreen apps, but I am not sure if this applies to paused apps as well, and the last thing I'd want to do is mess up and lose all of those paused apps.
I've tried disabling and re-enabling restrictions several times to no effect, downloading a brand new app, and everything else that's been suggested except for rebooting the device for fear of losing those pending apps.
What would you all suggest I do? There must be some way to force it to display all offscreen apps.
This is an ipod touch 4th gen running 4.3.
Thank you very much for your help!

Hello
I think i have a similar problem to this. When i updated my iPod 2nd generation last week because i required it I found after it was all installed correctly that my apps did not work properly. For example, when i want to play a game it loads up for the first 5 seconds and then goes black and then goes back to my homescreen - AND this happens to every single app i have. It even happens when im on safari after a while. I honestly have no idea what has happened to it but before this occured it was working perfectly fine. I just know that this has something to do with the update because during the update the software was not downloaded properly and so i had to repair iTunes and re-install it.
Please HELP, i dont want my beloved iPod to break

Leopard Issues When Installing, Doesn't recognize external drives

Here we go again,
I have another user who upgrade to Leopard doing an Archive Clean Install probably with the external hard drives plugged into the Mac. Now his external drives aren't recognized at all. Does anyone know what is causing this issue and is there away to fix this problem without doing a complete archive reinstall all over again?

Phil Erskine wrote:
Here we go again,
I have another user who upgrade to Leopard doing an Archive Clean Install probably with the external hard drives plugged into the Mac. Now his external drives aren't recognized at all. Does anyone know what is causing this issue and is there away to fix this problem without doing a complete archive reinstall all over again?
Is the partition scheme and format consistent with that machine and Leopard?
Were the drives password protected?
Can you mount the drives using the terminal?
Do the drives show up on any another computer running Tiger? If they don't then going back to Tiger won't help.
There was a problem early on that it sometimes took a very long time (1/2 hour) for Leopard to recognize a drive because of Spotlight. How long did you wait for the drives to be recognized?

[SOLVED] Issue when installing many packages

I recently installed arch linux and I remember being a bit worried about something: you know that packages that are being installed might remind you about things that you manually have to do in order to archeive this or that, like for example wireshark will tell you that you should put yourself into the wireshark group to be able to dump as a standard user.
Now, I've seen a lot of those messages for my initial setup that I could not read. For example, when I did pacman -S gnome on the base system, it pulled in a lot of deps and at the same time gave me many of those hints - which basically just flew by (I wasn't smart enough to log a copy of the output of that command).
Does someone have a script that takes my local pacman database, and throws only the hints for all installed packages back to me? Thx
Last edited by vvd (2013-03-27 19:54:13)

vvd wrote:(I wasn't smart enough to log a copy of the output of that command).
You should be able to find the same output in /var/log/pacman.log
vvd wrote:Does someone have a script that takes my local pacman database, and throws only the hints for all installed packages back to me? Thx
I think that's not possible, since those messages aren't stored in any package metadata directly. Those messages come from scripts that are run pre/post install/upgrade/remove of a package.

Issue when installing xp on a T60

Similar Messages

Maybe you are looking for