Issue when Opening a dwg file for conversion

"An unexpected error has occurred. PDFMaker quits silently when creating a PDF" is the error.
The dwg has been created by Archicad 15. Dwg's created by other apps work ok. Is there some content I need to remove from the dwg?
I can send the file if anyone thinks they can help.

No good as layers don't come through. I didn't state this in my first post but that is the main requirement.

Similar Messages

I receive an error message when submitting a pdf file for conversion to a Word document "... an unex

I receive an error message when submitting a pdf file for conversion to a Word document "... an unexpected error has occurred..." - is there a way to overcome this error?

I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
Jyh-Jiun Liou

Authentication prompt issue when opening an office file in a document library with read permission for domain users

An user as part of the domain users tries to open an office file from a document library but he got an authentication prompt asking him to authenticate. Domain users has only access to this library and not to the whole site. This uses to work in SharePoint
2007 without any problem but not in SharePoint 2013, we didn't have a workflow on SP2007.
Domain users has read access to only this document library in the site, but he shouldn't get an authentication prompt since he is part of the domain users and he is not trying to modify the document, he can open the document but gets two prompts, he can't
also see the list using explorer view since nothings appears using the explorer view.
Now, when opening the file, we can see..Updating Workflow Status, but we don't have any workflow working on this site or library, event any feature related to workflow.
If we go to the event viewer in the server, we find this information,
I also checked this thread but I couldn't find this scenario.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/91bc770b-bb70-4885-a4ad-a243edb88753/event-id-8026-workflow-soap-getworkflowdataforitem-failed-doc-library-no-workflow?forum=sharepointgeneralprevious
I also created another list with the same permissions and using other office files but got the same behavior.
Now, we have migrated this site from SP2007 to SP2013.
Any ideas?

OK, I am going to throw out a lot of ideas here so hopefully they get you closer to a diagnosis. Hang on :)
Does it happen to work for some users but not others? If so, try logging in on the "good" computer with the "bad" username. This will tell you if the problem is related to the end-user's system. Also, once the user downloads a document
successfully can they open and work on it in Word? Also, does the document library have any custom content types associated with it or does it just use 'Document'?
I notice that there are other folks on the web that have run into this same problem and the similarity seems to be that they are either on SharePoint 2007 or have upgraded from 2007. Did this doc library start out as a 2007 library?
What you might want to do is this: Make a site collection from scratch in 2013 (or find one that you know was created in 2013). Choose team site (or whatever you want) for the root web and set up the security the same way you have it on the malfunctioning
library. Now, use windows explorer to copy and paste some of the documents to the new location. Be sure you recreate any needed content types. Now test it from the troubled user's computer.
I'm thinking there may be something that is different about the library since it was migrated through various versions and updates since 2007. I've sometimes found that there can be problems (especially with user profiles but that's a different story) with
things that go through this evolution.

Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced

Hi Friends,
I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
Anyone have idea to solve this issue please kindly help me.
Thanks

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Display issues when opening InDesign CC files

I have had CC since it was released and I am having an issue. when i open a INDD file, indesign will open correctly, but the document will not display. I can see the scroll bars, and can move the mouse auround and the cursor will change like it's hovering over a frame. but not visual document. It also collapses all my panels.
It lookes like this
I am running Indesign CC, Win 7 pro 64bit
Core i7-3770 3.4ghz
16gb memory
NVIDIA gforse GT 640
500GB WD Velociraptor
Any thoughts?

Second report like this today...
Try trashing your prefs. See Replace Your Preferences

Paragraph style issue when opening imdl (CS5) file in CS4

Sending a CS5 file to a printer using CS4. When they open the imdl file in CS4, it changes the paragraph style in the pull quotes. The initial character, whether a letter or a quote, appears tiny. It looks like a paragraph style issue. The 'quote' paragraph style in CS4 has a drop cap set on it.
Has anyone else had this problem or have a suggested fix? Certainly, we can check our files in CS4 before sending each time, but what a pain!

IDML is meant as an interchange format, and is far from "the same file but in another version".
If your printer wants a CS4 file, send them a CS4 file. Better yet, ask them why you have to send them native files anyway and what's their problem with a PDF?

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

Issues when opening EPS files

Hi
I'm encountering a problem when opening a EPS file in Illustrator for editing
when I open the file and ungroup the object the stokes are all messed up and broken.
As an example the light colour in the image below is what one of my lines looks like when imported
if anyone knows how I might be able to stop this from happening when I open the file I would be very gratefull
thanks

Depending on where the file originated, this could be perfectly normal. Might be expanded strokes that break apart or something similar... anyway, impossible to know without more details or the file itself...
Mylenium

How to open a DWG file with AutoCAD options (AppleScript)?

Hi,
I'm looking for help specifying the AutoCAD options when opening DWG files. I have DWG files of floor plans that I always want to open at the same scale.
I can successfully open a DWG file with the default options using:
open POSIX file "/Users/crmckinnon/Desktop/cabin_floor_plan.dwg" as alias without dialogs
But I don't want the default options, so if I try to specify them:
open POSIX file "/Users/crmckinnon/Desktop/cabin_floor_plan.dwg" as alias with options {class:AutoCAD options, scale unit:"autocad inches"} without dialogs
I get a "Can't find alias" error. How do I specify the AutoCAD options? I'm sure this is due to my lack of understanding of AppleScript. Any help would be appreciated!
Thanks,
Chris

I'll answer my own question. Here's how I specified the options:
open POSIX file filePath as alias with options {pGSO:original size, pASU:inches, pASR:12.0 / 0.1875} without dialogs
I had to look in the Apple Script dictionary to get the "codes" to use. The variable names didn't work. I think that's because some have "global" in the name which is a keyword in Apple Script. Here's what the codes translate to:
pGSO = "global scale options"
pASU = "scale unit"
pASR = "scale ratio"
Thanks,
Chris

Problem occurring when opening and saving files in AI SC5 with Windows 7

Hi, I ‘am a Graphic Designer and first time working in UAE Windows 7 is basically the only OS here. My PC is:
HP Elite 7000
Intel® Core™ i5 CPU 2.67GHz
4GB RAM
32-bit
Now to the problem, not that knowledgeable in IT stuff so here goes:
1. Problem occurring when opening and saving files in AI SC5 with Windows 7. (You will actually see a “Not Responding” word coming out while opening and saving files, whether small or large files)
2. Locked layers occasionally are moved accidentally.(Working on multiple layers is normal so we need to lock it specially the once on top. But there are times I still manage to select locked layers)
3. After typing and locking the text, pressing “V” for the arrow key shortcut is still added to the text that is locked. (After typing I lock the text layer with my mouse and Press “V” to activate the arrow key… yes the arrow key is activated but the text is still typing the actual keyboard pressed)
I’ve only use the brand new PC and installer for a month now. Not sure if this is compatibility issues or something else I’m not aware of.
Thanks in advance to people that will reply.
Cheers!!!

Well I’m still wondering if it is compatibility issues because I’m also having problem with Photoshop CS5. These 3 are all bought at the same time (PC, Illustrator and Photoshop installers). The problem I’m having in Photoshop is not that too important, every time I Ctrl+O to view files, all PSD are shown in white paper like icons, no preview, and saving as well.
Or I just purchased a corrupted or pirated installers… Adobe updates are done every time I’m prompted.

What happens to entities on layers when opening FH MX files in AI CS 5?

Hi,
when opening Freehand MX files with multiple layers - and multiple entities on these layers -, we figured out that all entities are to be found on the first layer (alphabetic sequence) in Illustrator. In other words: the entire structure of our FH document is completely destroyed and all entities are lying on only 1 layer.
Did anyone of you encounter the same issue? And if so, did you find a solution to fix this problem?
Many thanks for your assistance in advance!
Greetings from sunny Germany,
Andreas

Monika,
this occurs in any existing FH MX file we are opening in AI CS5. And we have hundreds of thousands of them. I don't think that our objects are somewhat "special" - just the regular types of paths, text etc.
What I find really amazing is that all existing layers within the FH MX file are properly being migrated into the resulting .AI file. To me, this means that AI CS5 recognizes and translates the layer structure correctly. So far so good - apart from placing/leaving the existing objects on their respective layers.
Strange, isn't it?

Does anyone else have trouble opening Autocad dwg files in Illustrator CS4?

When I try to open some .dwg files from Autocad I get the message " Version of this LPF file is not supported" Can anyone help with this? Does the problem lie with the (autocad) sender or with Illustrator? Stumped and needing to get on with work!

It probably dies not support that version, for instance v2010

Ai CS4 has stopped opening some dwg files

Hi, Hoping someone can help me out.
I have been using illustrator CS4 for a couple of years with no issue, just recently it will no longer open or place all dwg files.
I contacted our cad team and found out that they have upgraded from AutoCAD 2011 to AutoCAD 2012, however, they are still saving the dwg files in 2004 dwg format as they were previously.
Just to confirm I can open 2004 dwg files saved in AutoCAD 2011 but cant open the newer 2012 CAD version. "The file "TGdean.dwg" is an unknown format and cannot be opened."
Any help would be greatly appreciated.
Thanks in advance. Deano.

Hi Mylenium,
Sorry for the delay, I have being trying a few other options as well. I have downloaded the trial version of CS5.5 and still have the same issue. Additionally I have upgraded the dxfDWG.ai plug-in which also has not worked.
I have done as you mentioned but i'm afraid I can't understand the lines of symbols and their meanings. I have copied the first paragraph out of each file and have identified 3 changes. These are:
Differences
Original                              2012
B] It% jã= *v% †á{                 It% jã= Æx% H Ú
ø ¾gK ¹$                              A–Æz`œÅl'
WÊ?D + O                            WÊ?D +«M
here are the paragraphs that these are extracted from:
Original document
AC1018     h À                          €   àR   V                                                                              h@ø÷’*µï Ý ññ»éëß¦Û<ƒ >™$^
·GÞ³ MÈB»‹¦# Z}©Š/ ]ÔËüRYO;
Û®2 šPî`x6ý’I2öÞ}IÜ‘O ò¤élÐkÄ0· ;¡"Ê"‘á‹ ÚFÖÆ¢øFj –s Ù /ghÔ÷JJÐWhvPV bRdAëSdAËSdAkRdAkRdA (Ÿ„ ^¤
martinhorton          B] It% jã= *v% †á{     Manager     Company Category     Part Number IS 10738   Description     Project Designer   Administrator Engineer
Authority     Cost Center     Vendor     User Status     Design Status   WorkInProgress   Checked by     Engr Approved by     Mfg Approved by                                    ðU ÁQdAË dAë dAËQdAËQdAø ¾gK ¹$ %m Ô6((WÊ?D + O    ç P    7 °N
Document opened and saved in 2012
AC1018     h À    ?    ?                €   àR   V                                                                              h@ø÷’*µï Ý ññ»éëß¦Û<ƒ >™$^
·GÞ³ MÈB»‹¦# Z}©/ ]ÔËü(DO;
Û®2 šPî`x6ý’I2öÞ}IÜ‘O ò¤îlÐkÄ0· ;¡"Ê"‘á‹ ÚÖKÛèøFj –s Ù /ghÔ÷JJÐWhvPV bRdAëSdAËSdAkRdAkRdA æg‡ fn                 alantyrrell           It% jã= Æx% H Ú     Manager     Company Category     Part Number IS 10738   Description     Project Designer   Administrator Engineer
Authority     Cost Center     Vendor     User Status     Design Status   WorkInProgress   Checked by     Engr Approved by     Mfg Approved by                                     ðU ÁQdAË dAë dAËQdAËQdA–Æz`œÅl' %m Ô6((WÊ?D +«M    ç P    7 HM
I have managed to run the command prompt and it concludes that the document opened and saved in 2012 is longer than the original?
Can you help any further?
Cheers!

Issue when Opening a dwg file for conversion

Similar Messages

Maybe you are looking for