Issue when travelling Europe and connecting to public WiFi networks

I often have an issue when travelling in Europe and go to an Internet café with my iPhone.
I enter all the info and in wifi settings the network is ticked to say connected. The wifi icon is also visible in menu bar but whenever I try to connect I get a message that page is not available or to check settings.
Can't see anything wrong and settings are as they normal are when connecting to wifi at home in UK.
I also get this when connecting to free public wifi even when it requires no password
Any ideas why this may be? Travelling this weekend and am sure this will be an issue whilst away so would like to get to bottom of it. 
Message was edited by: RDH

Thanks for the suggestion but that is not practical once I arrive to Spain.
Will not be taking a Mac to restore from if there is an issue.
Restore network settings is worth looking at but full restore of iPhone is out of the question. Just wondered if this is a known issue with a simple fix.
All seems a bit like using a sledgehammer to crack a nut ;-)

Similar Messages

  • I can't connect to the router in my home.  Things were working fine as usual - I attended school and connected to their WiFi network as usual.  When I returned home I could not connect to my own home router.  The Ipad seeks the network but nothing happens

    I can't connect to the router in my home.  The Ipad seeks the network but nothing happens.  I went to school and connected to their WiFi network as usual with no problems.  When I returned home I could not connect to my home router.  The Ipad seeks the router number but nothing happens.  I rebooted the Ipad a few times in the school.  The numbers identifying the router, etc. on my Ipad no longer appear there. 
    TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
    I reset the network settings to the factory defaults but this doesn't fix the problem.
    What can I do to reconnect to my home router?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT5437 When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

    When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

    Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV.  You will need to speak to IT in order to grant access for the device.

  • When I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password

    when I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password; thoughts?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4623 i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network

    i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network

    I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
    after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
    make sure you are close to the wifi signal away from any other wifi devices.

  • TS1398 My Ipad can't connect to WiFi.  I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

    My Ipad can't connect to WiFi.  I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

    Try a soft reset or turn the device completely off then turn it back on again. Also you can toggle Airplane mode on for about 10 seconds and then turn it off. Sometimes that resets the radio signal inside the device.
    A soft reset is basically holding onto the power button and the home button simultaneously together for about 10 seconds or until you see the screen flash and it should go completely black. Afterwards, tun the device back on like normally and see if that fixes the problem.

  • Third-Party apps can't connect to public wifi  networks.

    When I connect my iPhone to my university's Wi-Fi connection, Apple Apps (Safari, Mail, iTunes, App Store...) all function normally. But when it comes to third-party apps I can't get them to connect to the internet. So is there a workaround to this? Maybe get iPhone to treat apps as an "Apple App" so the proxy server gives it access to the connection (The server requires a username and password verification to connect). This happens with other public wi-fi connections. I dunno if I'm giving all the necessary info. so if anything is unclear, I can explain further...
    Thanks
    Message was edited by: A-Jay

    You don't give any examples of the apps that are not working.
    Some public WiFi networks will only have certain network ports open, like those for web and mail. If an app uses an unusual network port then it may not work on the public WiFi network.

  • My iPad 2 won't connect to Public Wifi Networks

    So a few weeks ago I was at a cafe and tried to connect my iPad 2 to the wifi network of the cafe with no avail. I have tried rebooting multiple times, resetting network settings a couple of times, have tried most about anything but my iPad will only connect if I'm standing next to a router. Even then the signal that it's receiving it's not full. I don't know why this is happening please can someone help me out? It's really frustrating!!!

    Have you tried ....
    Rebooting your router?
    Turning WiFi off and then on again?
    Settings>WiFi>Network name>Forget this network?  Find the network again, tap on it, enter the password?
    Settings>General>Reset>ResetNetwork Settings? Find your network again, tap on it, enter the password?
    Restart the iPad? Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?

    Hi
    When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
    connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
    get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • Not getting login page when I connect to public wifi

    I'm here at a hospital with free wifi. However, when you first connect, it redirects you to a webpage which describes their usage policy and a form for you to submit your email address.
    It works fine with my iPhone and iPad, but, with my Windows 8.1 Enterprise laptop, when I choose to connect to that wifi network, I am never redirected to this webpage. Windows only tells me that the connection is "Limited".
    How do I fix this?

    Hi,
    Did you resolve your issue? Could you connect other WIFI using your Windows 8.1 laptop?
    If no, please troubleshoot your issue as below article:
    Windows 8.1 Wifi showing "limited" or "No Internet Access"
    http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
    Karen Hu
    TechNet Community Support

  • My Apple Tv is connecting to the Wifi network but is not connect to the internet.  So when I look for it on my Airplay it doesn't come up.  I have 3 other ones already working on the network and they are all fine.

    My apple TV is finding and connecting to the Wifi network but then says it is not connected to the internet and then I cannot find it on the iPad through airplay.  I don't want it connected to the internet (as in www.) because for the use I have I only need to use the Apple tvs locally in a sports hall as scoreboards.  I have 3 others working on the same router and they are working fine (as of yesterday)
    On my screen I see (obviously not written like this)
    network connect- yes
    signal strength- fine
    Ip address- fine
    DCN- fine
    Activation- Failed
    This is the only negative I can find and the statement that the Apple TV has connected to the wifi but is not connected to the internet.
    Where has it gone wrong for me. Please help

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • HT1551 My Apple TV Home Only Has 'Computers' And 'Settings'. Isn't There Supposed To Be Youtube And Netflix And Stuff? I signed in to my iTunes account AND Connected to a wifi

    Before I updated my Apple TV, It had everything, 'YouTube' , 'Netflix' And the iTunes Store. I just updated it and connected to my WiFi network and signed in to my Itunes account. After that there wasnt anything in the home screen, execpt for 'computers' and 'settings'. Any help?

    This always implies the AppleTV is not seeing the internet when it starts up, as it seems to acquire available category content from there.
    Restart your router and unplug and restart your AppleTV - does that help?

  • Can't connect to other Wifi networks although it works at home

    My curve is configured to 'wifi preferred' and shows UMA signal when in my home - using BT Home Hub.  Recently I tried to connect to a hotel wifi and my mum's Orange Livebox.  Both are now stored on my BB as available connections but Active WiFi connection is showing 'none'.  I can't work out how to get it using the Wifi instead of my data plan.
    I've read some threads recommending 'hotspot' setting but not sure if this will restrict me to WiFi only?  Of course, I would like it to automatically switch back to my BT hub once home.  Have done battery pull but no different.
    Am at my mum's at the moment if anyone can help please!
    Thanks.

    Some hotspots require you to log in before you can actually access the internet.  Once you do a scan, and connect to the wifi network then you need to open the browser, and go to the Bookmark screen and click on "wifi hotspot login." 
    Not every wifi network is compatible with every device so some hotspots just may not work.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Apple iphone 5 and 4 not connecting to public wifi

    Have the wife's iphone 4 on 6.1.3 and mine iphone 5 6.1.2 that won't connect to public wifi.  It connects at home no problem.  When it connects to public wifi and requires some sort of user agreement or authentic, the next page or safari doesn't come up.  Anyone else come across this.  Thanks in advance

    At the home network it is self secured with a password so it does not require any kind of additional settings...but in case of a public network many a times it is possible to have manual HTTP Proxy settings..
    - First when you turn on your wifi in your mobile..it catches up the nearby singnals and shows u the networks available
    - now when u join them by tapping on the network...if it is succesfully connected then it shows u a TIC mark in front of the network name...
    - now on the same network name u can see a small arrow icon beside it which is blue in colour...
    - tap on that and then scroll down..u can see a option HTTP Proxy
    - there tap on the manual option and then add the respective port and server ...they sholud be in the form
    (server-    xxx.xxx.xx.xx        port-    xxxx ). where      x-number digit.
    - you should be getting this info of the server and port from the network manager..ask him and then add them...
    - authentication is required for secured networks..i.e if the networks have a username and password...
    if this doesnt work in the first attempt then try and do a RESET of ur phone and try the above again.. u will not loose any data..so do not worry..here is how you do a reset...
    - hold the power off button and homescreen button together simultaneously for about ten seconds ..hold till u see a apple logo on ur screen and then leave them...it will switch on automatically...
                  hope that this will help you...reply if you need any more help....happy to help...........

  • Issue with Connecting to Public Wifi

    Hi All,
    Really need some help. Recently purchased an iPad mini and I m having loads of problems connecting to public wifi. It connects fine to home wifi and my Iphone 4 connects to the public wifi. Been through all the searches on the Internet for a fix but really cannot understand why it will not connect. Basically I can the wifi network to show and then when I connect it just comes with a error message saying "hotspot login cannot open the page because it is not connected to the Internet". Have tried resets / setting changes etc - basically all the settings advice you find on the Internet and help desk on apple. The most frustrating thing is that I work in a place that sells iPad mini and we have a demo model for customers that connects without any problem ? Yet when I try stood next to it an iPad wont. I have tried other iPad mini and they come up with the same problem. Any help would be much appreciated !

    Hello Bluegradyn,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Best of luck,
    Mario

Maybe you are looking for

  • Dual booting Arch and Ubuntu

    Hi, I would like to dual boot Arch and Ubuntu using GRUB2. I already have Arch, set up as it's described in the Beginner's Guide, with GRUB2 installed. How would I go about dual booting Ubuntu, preferably without overwriting the existing bootloader?

  • Dell Precision T5810 Core options and GPU config? Running CC on virtual desktops?

    Hi, two questions really but didn't want to start multiple threads. I tried searching for answers to my questions but was not very successful so am trying to post. I am looking at buying some computers for our office which will be using the CC subscr

  • Notable quality difference for same screen connected via HDMI or VGA

    I have created the following topic: https://bbs.archlinux.org/viewtopic.php?pid=1386998 in which I was trying to get help for a strange color anomaly on my screen. Finally I found out that when I connect with VGA, this color anomaly doesn't occur. I

  • How to make Inputfield read-only dynamically?

    Hello Experts, I used an input-field which the user can enter values through F4 help. After user selection, I want the input field to be read-only. And again if user wishes to change the value by F4 help, the input-field should be editable. Can we ac

  • Is it possible to add new characteristic to CCM catalog SRM_EXTRACTED_CTLG?

    Hi Experts, Any idea if I can transfer new extra data from the SRM product master into CCM? (via program BBP_CCM_TRANSFER_CATALOG) So I want to add a new characteristic (e.g. ZVALUEPRICE) to the catalog SRM_EXTRACTED_CTLG and fill it with the valuati