Issue when using HP deskjet D1660 shared by printer server

Hi,
I'm trying to use HP D1660 through ReadyNAS's (network storage) printer server feature.
I connected D1660 and ReadyNAS through USB link. Using system preference-printer&fax, my mac perfectly sees exact printer name broadcasted through bonjour and I assigned snow leopard built-in driver for "HP deskjet D1600 series".
But it turns out not to be working.
Interesting thing is, it perfectly works when I try to print on my Windows 7 PC with exactly same configuration (readnas-d1660 shared on network)
Am I missing something?
I already tried every single protocols for network printers (IPP, LPD, HP jetdirect...).
I'm stuck...
Message was edited by: kdsoo

I'm attaching part of error log
D [16/Jun/2010:19:09:34 +0900] [Job 40] Started filter /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp (PID 3984)
D [16/Jun/2010:19:09:34 +0900] [Job 40] Started backend /usr/libexec/cups/backend/ipp (PID 3985)
D [16/Jun/2010:19:09:34 +0900] [Job 40] STATE: +connecting-to-device
D [16/Jun/2010:19:09:34 +0900] [Job 40] Looking up "kdsoo"...
D [16/Jun/2010:19:09:34 +0900] [Job 40] backendRunLoop(print_fd=-1, device_fd=6, snmp_fd=5, addr=0x100109418, use_bc=0, side_cb=0x1ece96834)
D [16/Jun/2010:19:09:34 +0900] [Job 40] Job canceled by "nate"
D [16/Jun/2010:19:09:34 +0900] [Job 40] Received an interrupt before any bytes were written, aborting!
D [16/Jun/2010:19:09:34 +0900] [Job 40] Set job-printer-state-message to "빈 프린트 파일!", current level=ERROR
D [16/Jun/2010:19:09:34 +0900] [Job 40] Backend returned status 1 (failed)
D [16/Jun/2010:19:09:34 +0900] [Job 40] End of messages
D [16/Jun/2010:19:09:34 +0900] [Job 40] printer-state=3(idle)
D [16/Jun/2010:19:09:34 +0900] [Job 40] printer-state-message="빈 프린트 파일!"
D [16/Jun/2010:19:09:34 +0900] [Job 40] printer-state-reasons=none

Similar Messages

PrintOpen crashing application when used after PrintSetPrinter for networked IPP print server

This is on Windows Server 2008 using PB 12.1 Build 7298.
I'm using PrintGetPrinters to get the printer name of the networked IPP print server that is setup on the machine and it comes back as:
\\http://aps-ps-1:631\cp
I then use PrintSetPrinter with that name to change the printer, which works fine.
After calling PrintSetPrinter I call PrintOpen to open a print job, which then crashes the application with a gdi32.dll fault.
If I call PrintOpen( "testing", true ) it works fine, but PrintOpen() or PrintOpen( "testing", false ) crash the app. This all works fine on a non networked printer on the server, which we've been using for years, but are now trying to switch to a print server.
Does anyone know why PrintOpen would be crashing when not showing the print dialog box? Any help would be appreciated.
Thanks,
Eric Cole

Hi Chris,
Thanks for the reply. It's not a catchable exception, already tried that. It's one of those faults where you get the microsoft windows yourapplication.exe has stopped working popup and it puts an error in the system application events that you can view in the event viewer. There isn't much info in the event to go off of either.
I did find another older forum post that seems to be the same issue but with PB 12.5.1 and where mine is crashing his just didn't print. The thread is here: http://nntp-archive.sybase.com/nntp-archive/action/article/%[email protected]%3E
Since it's only an issue with PrintOpen I'm changing it to datawindow.Print instead, but I have to combine 2 datawindows in the same print job without a print dialog so I'm forced to come up with a workaround in order to accomplish that. I'm going to hopefully create a composite datawindow with the 2 combined dws so I can get them in 1 print job. It's just going to take longer than I thought because my datawindows have nested reports so I can't use GetChild to get a reference to them and they are being modified with .Modify.
Eric

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Odd issue when using UDT (user defined type)

Hi all,
11g.
I ran into an odd issue when using UDT, I have these 4 schemas: USER_1, USER_2, USER_A, USER_B.
Both USER_1 and USER_2 have an UDT (actually a nested table):
CREATE OR REPLACE TYPE TAB_NUMBERS AS TABLE OF NUMBER(10)USER_A has a synonym points to the type in USER_1:
create or replace synonym TAB_NUMBERS for USER_1.TAB_NUMBERS;USER_B has a synonym points to the type in USER_2:
create or replace synonym TAB_NUMBERS for USER_2.TAB_NUMBERS;Both USER_A and USER_B have a procedure which uses the synonym:
CREATE OR REPLACE PROCEDURE proc_test (p1 in tab_numbers)
IS
BEGIN
NULL;
END;And in the C# code:
OracleConnection conn = new OracleConnection("data source=mh;user id=USER_A;password=...");
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "proc_test";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter op = new OracleParameter();
op.ParameterName = "p1";
op.Direction = ParameterDirection.Input;
op.OracleDbType = OracleDbType.Object;
op.UdtTypeName = "TAB_NUMBERS";
Nested_Tab_Mapping_To_Object nt = new Nested_Tab_Mapping_To_Object();
nt.container = new decimal[] { 1, 2 };
op.Value = nt;
......This code works fine, but it raises an error when I change the connection string from USER_A to USER_B, the error says:
OCI-22303: type ""."TAB_NUMBERS" not foundInterestingly, if I change op.UdtTypeName = "TAB_NUMBERS"; to op.UdtTypeName = "USER_2.TAB_NUMBERS", the error is gone, and everything works fine.
Anyone has any clues?
Thanks in advance.

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

Bluetooth issues when using smartwatch on the z1s

I'm having some Bluetooth issues when using my smartwatch. I usually use my z1s with my car radio via Bluetooth to listen to music and for making calls. Now that I got a sony smartwatch I always got problems with the calls. It looks like that the Bluetooth turns off during the call when I'm using the smartwatch. I already tried by deleting and pairing again the z1s, but nothing works. Not sure if maybe the z1s does not support the smartwatch and the care radio Bluetooth connection at the same time. However it works fine when playing music! The problem is just with the calls. This never happens before I got the smartwatch.

I have the Tmobile Z1s and a SW2 and have the same issues with multiple devices:
1) Bose Soundlink Mini
2) Sony MBR-100
3) My car's bluetooth
4) Ford Sync
5) Sony SBH20
6) Motorola S305
If the phone connects to the A2DB device, it will typically play fine for several minutes. Then, audio will drop out. If I do nothing, after several minutes my watch will vibrate to show it has disconnected. Sometimes audio then comes back, and sometimes it doesn't.
Sometimes my phone will not connect to my car. Then, if I can get it to connect, it will only allow for phone audio, not media audio.
This issue has been on (2) Z1s's with the SW2. The first I returned due to touch screen issues, which the second one also has. All of the devices above worked perfectly fine with my Xperia Z, Galaxy S2, HTC One, etc. The Xperia Z and the SW2 never had any problems.
Honestly, this phone has been incredibly frustrating. If the upcoming updates for either the SW2 or Z1S don't fix this issue, I'm going to return it and get something else.

The cyan color won't print when using our HP Pro 6500 Officejet printer

the cyan color won't print when using our HP Pro 6500 Officejet printer. Can I get help with this?

This doesn't make sense. The printer is exhibiting behavior noticed when a network printer is connected to a laptop while the laptop is connected to a VPN. But in this case, neither the printer is connected on a network, not is the laptop connected to a VPN per se.
Are you sure all the latest drivers for your laptop have been installed? That's pretty much the only thing I can think of right now.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

MacBooks can't resolve printer name when sending job to windows 2008 R2 print server.

So I am work at company in a windows server 2008 r2 and we have a windows 2008 r2 printer server. Our macbook pros are not on the domain so every time we print to the server we have to type in our credentials.
MacBooks can't resolve printer name when sending job to windows 2008 R2 print server while on wifi but works when hard wired. Any thoughts? The error message I receive is "invalid printer name". I've tried adding the printer through the advanced tab in the print and scan tab of system preferences. I add it buy smb://servername/printername.
When I tried to print on the wifi at my office I get "invalid printer name" in the print job status que.
We can just do direct printing but I would like to know if anyone has had this issue before and if you could point me in the right direction. Thanks!

I assume you aare using exchange when configuring the email notifications? What I would do is just use a normal IMAP & SMTP account such as Outlook.com or if you use a POP connector for exchange, one of those accounts' SMTP settings.
For example, I have a POP connector installed and my emails are hosted at 1and1. What I would do here is put my 1and1 SMTP settings in and use these, instead of using Exchange.
Let me know if this is possible.
Ed

Best Practises for File Sharing and Print Server on Windows Server 2012

Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien Sherief

It will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions.

Printing issue when using Intel Macs to print wirelessly via Airport

We seem to have a problem. It has come to light since using Intel based Macs running 10.4.7 and Airport to connect wirelessly to the internet and to print to a Acculaser C1900N with intel printer driver installed. When setting up by Bonjour and then printing to the printer it fails and an exclamation mark appears on the printer icon in the Dock. Appletalk is enabled for the port, just in case you ask.
Browsing the internet works fine, but the printing side fails every time.
When we insert a Ethernet cable everything works fine.
As far as I can see its not a System Software problem related to old macs running 10.4.7, but to new Intel macs running 10.4.7. I have tried this on a Intel Mac Mini and also an Intel MacBook the results are the same.
Please has anyone got a solution as we start a new term with these new macs in about two days and printing is a integral part of school life.

I have just configured a new Airport Extreme and I have just printed sucessfully to our printer. Weird its just a Graphite Airport base Station Issue. I am not sure if the problem occours with the Snow Airport Base Station....Ill have to try that one out. I am so happy that it works you wouldnt believe it.

Smartform font spacing Issue when using SAP printer name

Hi Friends,
I am facing some spacing issues when printing a form using SAP printer name. If I use LOCL then the output comes perfectly but when I use the SAP printer name the space between characters are getting widened and so the alignment of each column goes wayward. I suspect it could be due to the device type but not sure which seeting controls this. There is a similar problem in the logo as well. When using LOCL the logo comes out good but when using the printer name the quality is not good and becomes pixelised. Have any of you faced similar issues? Can you provide some guidance or pointers for the solution.
Device type of LOCL : ZSAPWIN
Device type of SAP printer name : ZHPLJ5
CPI is defined in smartform as 10.
Please let me know if you need more information.
Thanks,
Praveen

Hi,
This problem occurs because the printer driver for both the printers are different,
I suggest you use Local printer only or configure any other printer with printer diver in SAP as SAPWIN.
Regards,
Bharat.

Performance issues when using Smart View and Excel 2010

Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
Nick

Hi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM

QBE issue when using different db types

Hello,
Our ADF application has the ability to connect to the same schema but different backends (Oracle and SQL Server). I have successfully implemented switching the AM data source. I am running into a syntax issue when performing Query By Example for a table. The error is (Incorrect Syntax near "|"). In the VOImpl I overrode the function public String getViewCriteriaClause(boolean forQuery) and I can see the viewCriteriaClause is "( (UPPER(TransMasterEO.TMMessage) LIKE UPPER( ? || '%') ) )". This works when running against the Oracle instance but fails when running against the SQL Server instance.
I implemented code to replace the "||" with "+" but then we fail on Oracle. Can someone recommend an approach to resolve?
Running 11.1.1.6
Thank you
Rudy

he different dbs yre using different sql flavors. This is causing trouble if you change the connection to a db which is using a different flavor. I'm not aware that you can change the flavor used to build the queries to, but you can implement your own sqlbuilder which may just extend from the one for hte right flavor and then build the sql through the right class.
Check http://jobinesh.blogspot.com/2013/02/customizing-sql-builder-class.html for more info on how to change the sqlbuilder.
Timo

Issue when using Navigation attributes for filtering in BEX

Hello,
We are encountering an issue when applying filter on Navigation attributes in BEx query built on top of a BW HANA Virtual Provider.
The interface is as below :
HANA Calculation View -> SAP BW 7.4 Virtual InfoCube -> Multiprovider -> BEx Query.
We have directly mapped the base Infoobject from HANA View to BW Virtual Provider and using this in BEx query free characteristics. We also have used the navigational attribute of this Infoobject in our Report variable screen as well as an Auth relevant object.
Eg if ZMATERIAL is the base infoobject and ZMATERIAL__ZXYZ navigational attribute is used in the report variable screen and as Authorization variable.
This is causing the query to fail.
The query also fails if I apply any filter values on any Navigational attribute with error message :
"Termination message sent ERROR DBMAN (305): Error reading the data of InfoProvider"
Using the navigational attribute with authorization variable fails with below :
"Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute ZMATERIAL__ZXYZ [...]"
Appreciate any inputs on this issue and how this can be fixed.
Thanks,
Tintu

Hi Andrey,
Thank you for your input.
Based on the OSS note , it says to import BW7.4 SP7. We are already on BW7.4 SP7
We get error "Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute
ZMATERIAL__ZXYZ" whenever we try to apply filters on any of the navigational attribute.
Thanks,
Tintu

XML Parse issues when using Network Data Model LOD with Springframework 3

Hello,
I am having issues with using using NDM in conjuction with Spring 3. The problem is that there is a dependency on the ConfigManager class in that it has to use Oracle's xml parser from xmlparserv2.jar, and this parser seems to have a history of problems with parsing Spring schemas.
My setup is as follows:
Spring Version: 3.0.1
Oracle: 11GR2 and corresponding spatial libraries
Note that when using the xerces parser, there is no issue here. It only while using Oracle's specific parser which appears to be hard-coded into the ConfigManager. Spring fortunately offers a workaround, where I can force it to use a specific parser when loading the spring configuration as follows:
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl But this is an extra deployment task we'd rather not have. Note that this issue has been brought up before in relation to OC4J. See the following link:
How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3
My question is, is there any other way to configure LOD where it won't have the dependency on the oracle parser?
Also, fyi, here is the exception that is occurring as well as the header for my spring file.
org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException:
Line 11 in XML document from URL [file:/C:/projects/lrs_network_domain/service/target/classes/META-INF/spring.xml] is invalid;
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
     at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:396)
     [snip]
     ... 31 more
Caused by: oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
     at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:425)
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:331)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:222)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:75)
     at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:388)Here is my the header for my spring configuration file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:aop="http://www.springframework.org/schema/aop"
       xmlns:tx="http://www.springframework.org/schema/tx"
       xmlns:context="http://www.springframework.org/schema/context"
       xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
       http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd
       http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd
       http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">Thanks, Tom

I ran into this exact issue while trying to get hibernate and spring working with an oracle XMLType column, and found a better solution than to use JVM arguments as you mentioned.
Why is it happening?
The xmlparserv2.jar uses the JAR Services API (Service Provider Mechanism) to change the default javax.xml classes used for the SAXParserFactory, DocumentBuilderFactory and TransformerFactory.
How did it happen?
The javax.xml.parsers.FactoryFinder looks for custom implementations by checking for, in this order, environment variables, %JAVA_HOME%/lib/jaxp.properties, then for config files under META-INF/services on the classpath, before using the default implementations included with the JDK (com.sun.org.*).
Inside xmlparserv2.jar exists a META-INF/services directory, which the javax.xml.parsers.FactoryFinder class picks up and uses:
META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines oracle.xml.jaxp.JXDocumentBuilderFactory as the default)
META-INF/services/javax.xml.parsers.SAXParserFactory (which defines oracle.xml.jaxp.JXSAXParserFactory as the default)
META-INF/services/javax.xml.transform.TransformerFactory (which defines oracle.xml.jaxp.JXSAXTransformerFactory as the default)
Solution?
Switch all 3 back, otherwise you'll see weird errors. javax.xml.parsers.* fix the visible errors, while the javax.xml.transform.* fixes more subtle XML parsing (in my case, with apache commons configuration reading/writing).
QUICK SOLUTION to solve the application server startup errors:
JVM Arguments (not great)
To override the changes made by xmlparserv2.jar, add the following JVM properties to your application server startup arguments. The java.xml.parsers.FactoryFinder logic will check environment variables first.
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
However, if you run test cases using @RunWith(SpringJUnit4ClassRunner.class) or similar, you will still experience the error.
BETTER SOLUTION to the application server startup errors AND test case errors:
Option 1: Use JVM arguments for the app server and @BeforeClass statements for your test cases.
System.setProperty("javax.xml.parsers.DocumentBuilderFactory","com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl");
System.setProperty("javax.xml.parsers.SAXParserFactory","com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl");
System.setProperty("javax.xml.transform.TransformerFactory","com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl");
If you have a lot of test cases, this becomes painful.
Option 2: Create your own Service Provider definition files in the compile/runtime classpath for your project, which will override those included in xmlparserv2.jar.
In a maven spring project, override the xmlparserv2.jar settings by creating the following files in the %PROJECT_HOME%/src/main/resources directory:
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl as the default)
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.SAXParserFactory (which defines com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl as the default)
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.transform.TransformerFactory (which defines com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl as the default)
These files are referenced by both the application server (no JVM arguments required), and solves any unit test issues without requiring any code changes.
This is a snippet of my longer solution for how to get hibernate and spring to work with an oracle XMLType column, found on stackoverflow.

Issue when using HP deskjet D1660 shared by printer server

Similar Messages

Maybe you are looking for