Issue while attempting to upgrade 07 service pack 3

While attempting to upgrade our Windows server 2008 server from Exchange SP1 to Sp3...we receive the following error message 
"Error:  The well-known object entry
B:32:0203007315595CE4DA33091DD24F58231:CN=Exchange Public Folder Administrators\0ADEL:bdabb1b4-dbb1f-4b0c-bd59:02e9b190b03,CN=Deleted Objects, DC=xxx,DC=xxx of the otherWellKnownObjects attribute on container object CN=Configuration,DC=xxx,DC=xxx points
to an invalid DN or a deleted object.  Please remove the entry and rerun the task."  
This error occurs during the Organizational prep stage of Service pack 3 installation within 15 seconds.  I've attempted to ADSIEDIT the entry but am having trouble finding the referenced item.  

Ok...now i'm really in a bit of a mess.  I haven't been able to restore the server services, including w2008 services etc..,  since the removal using the ADSI edit commands and it is pointing to a permissions issue.  I'm getting the following
in my Event Logs.
Microsoft Exchange System Attendant failed to read the membership of the universal security group '/dc=Local/dc=CEC/ou=Microsoft Exchange Security Groups/cn=Exchange Servers'; the error code was '80072030'. The problem might be that the Microsoft Exchange
System Attendant does not have permission to read the membership of the group. 
If this computer is not a member of the group '/dc=Local/dc=CEC/ou=Microsoft Exchange Security Groups/cn=Exchange Servers', you should manually stop all Microsoft Exchange services, run the task 'add-ExchangeServerGroupMember,' and then restart all Microsoft
Exchange services. 
"Microsoft Exchange System Attendant does not have sufficient rights to read Exchange configuration objects in Active Directory. Wait for replication to complete and then check to make sure that the computer account is a member of the "Exchange Servers"
and "Exchange Install Domain Servers" security groups."
as well as...
The Microsoft Exchange Replication Service attempted to start the RPC server but failed because an error occurred when attempting to read the Exchange Servers Universal Security Group SID from the Active Directory. Error message: 
Failed to find Exchange Servers group in Active Directory."
These messages basically occured shortly after the ADSIedit commands were issued.  I've since attempted minimal security permissions lookups with no success.  Any thoughts guys?  I would really like to avoid a restoral of my Exchange environment
which consists of 3 Domain Controllers and a single Exchange Server running 2008 std w/Exchange 07 sp1.

Similar Messages

  • I am getting error message while attempting to upgrade the software to iOS 6.1.3

    Hi,
    Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

    The Current iOS for the iPhone 4s is iOS 7
    How to update your iPhone, iPad, or iPod touch

  • Upgrade of Service Pack

    Hi all,
    We need to Upgrade the Service Pack of SAP BW.
    What is the process to do that?
    OR Pre or Post steps that we need to follow.
    Please help.

    You have to do following testing,
    Activity
    ExtractionCreation of Infopackage
    Execution of infopackage with filters(Dynamic and static) and without filters.
    Deletion of infopackage.
    Modify an existing infopackage
    Data Extraction from LO data sources(Full, Delta, Repair Full, Init,repeat delta)
    Data Extraction from Generic data sources(Full and delta)
    Modelling
    Creation of DTP
    Execution of DTPwith filters(Dynamic and static) and without filters.
    Deletion of DTP.
    Modify an existing DTP.
    Check for functioning of interactive DTP Code.
    Functionalities of Semantic groups and various Update modes in DTP settings.
    Creating of Error DTPs.
    Delta Intialization in DTP
    Check for functionality of start, end, and transformation routine.
    Aggregation behaviour with and without start routine.
    Update behaviour od end routine.
    Over write and Additive functionality of transformation.
    Delta functionality in DSO and change log entry creation.
    Check Delta Consistency from Write Optimized DSO
    DSO data load and activation of DSO data. (Both 3.5 flow and 7.0 flow)
    Data mart loads (execution of DTP in 7.0 flow and u201Cfurther updateu201D for 3.5 flow).
    Deletion data from DSO and Cube ( Selective, request based and full)
    Delete and create index.
    Cube Compression
    Rollup of Aggregates
    Request deletion in ODS/Cube
    Process Chains
    Run process chains for Master(with attribute change run) 
    Run process chain for transaction loads which has a full flow i.e source sytem extraction to Aggregate roll up.
    Check for Metachain execution
    Remotely calling a process chain from a source system
    Event based trigger of process chains
    Deletion of PSA and Changelog using process chains
    Deltion of contents using process chain
    Execution of ABAP pgms using process chains
    Functioning of decision making and interrupts in process chains.
    Front End
    Execution of report on Bex, Portal, RSRT
    Customer exit variable
    Virtual Characteristics/Key figures.
    Text variables with replacement path.
    Check for Formula variables.
    Run time Unit and/or Currency conversions.
    Hierarchy variables or Hierarchy.
    Query execution using RRMX (IN BEX)
    Creation of a work Book and refresh the work book.
    All existing functionalities of work like copy sheet,Global and local variables
    Excel version of queries.
    Broadcasting a workbook and query
    IP
    Create, Change , activate an Aggregation Level,Filter, Planning sequence,Planning Function
    Test the functionality of Planning Functions
    Test the reason entry Functionality
    Check the scroll in IP Screen.
    Others
    Creation and Execution of APD
    Creation and execution of Open Hub
    Data Archiving in Write Optimized DSO and Standard DSO
    Run Native SQL Pgms
    Run SE38 pgms
    Refresh Xcelsius dashboard and check for functionality.
    Regards,
    Sushant

  • Upgrade to Service Pack 2

    Can I just use the M/soft upgrade to Vista Service Pack 2 link on the Microsoft site and not affect any of the HP software on my TouchSmart pc?

    ruhtra2 wrote:
    how do i upgrade to service pack 2?
    Windows Update, or you can manually download Vista SP2 and install it yourself.
    The same would apply to Windows 7 SP1

  • Documentation on BPC V7 benefits for upgrading from service pack 3 to SP7

    I am looking for information on Service Pack releases & benefits.  Weu2019re currently on V7 SP3 (SQ2005) and want to understand the benefits between SP3 and the subsequent releases up to SP7.  Can someone point me as to where I can find literature on this matter?  Thxs all

    Hi Eduardo,
    As I know last SP for BPC 7 (MS version) is SP 6, you can find solved issues, installation/upgrade instructions and related OSS notes on OSS note 1388412.
    Hope this helps,
    Regards,
    Carlos.

  • How to upgrade the service packs

    Hi experts,
    I have one doubt about upgration of the service packs.How to upgrate one sevice pack to another one . Is there any  process to this.
    please let me know the things.
    Regards
    babu

    hi
    You need to first download the service packs for the particular product from the service market place. Service packs offer solution to the bugs in the product which was released earlier. So each version may have inturn have many service packs released.
    First of all before upgrade you need to know which version and service pack you are right now. Then accordingly you can download the desired files by giving the target SP and current SP. There are suitable upgradation documents available in market place reading upon which you can install Portal or WAS.
    Regards,
    Ganesh N

  • Performance issues while accessing the Confirm/Goods Services' transaction

    Hello
    We are using SRM 4.0 , through Enterprise Portal 7.0.
    Many of our users are crippled by Performance issues when accessing the Confirm/Goods Services tab( Transaction bbpcf02).
    The system simply clocks and would never show the screen.
    This problem occurs for some users all the time, and some users for some time.
    It's not related to the User's machine as others are able to access it fast using the same machine.
    It is also not dependent on the data size (i.e.no . of confirmations created by the user).
    We would like to know why only some users are suffering more pronouncedly, and why is this transaction generally slower than all others.
    Any directions for finding the Probable cause will be highly rewarded.
    Thanks
    Kedar

    Hi Kedar,
    Please go through the following OSS Notes:
    Note 610805 - Performance problems in goods receipt
    Note 885409 - BBPCF02: The search for confirmation and roles is slow
    Note 1258830 - BBPCF02: Display/Process confirmation response time is slow
    Thanks,
    Pradeep

  • Imac g3 screen issues. (after attempting to upgrade.)

    Hello!
    I was installing mac osx on my failry old imac g3. It told me that my firmware needed to be installed. So I clicked restart. When it restarted, my screen didn't show up at all! I restarted again and my screen was faint, crooked and blue. Now I can't even run my original os9!
    Did I delete some kind of screen setting!?
    How should I fix this!?

    For a firmware update to be applied to such a machine, the machine has
    to be running/booted into OS 9.1/9.2; and support for the USB pen/flash
    drive would have to be working inside the computer to import from one.
    If the iMac G3 has FireWire ports, you could use a FW cable from another
    Mac and use that Mac to import the firmware update into the hard drive of
    the other computer; or use disk utilities of the proper type to attempt to
    repair the old iMac's hard disk drive before going further. Could be not
    only is the logicboard in jeopardy, the drive may also have issues.
    [In some cases, a dead or weak clock battery can also be a problem in
    the process of firmware updates and PRAM matters.]
    The incompatibility of pre-Firmware updated iMac G3s to properly
    display video is part of the symptom you get to experience in a sit-
    uation where the OSX was installed (or X disc was used to boot the
    computer, before firmware was updated in the running OS9 system.)
    A different hard drive with the OS9 system for the iMac installed on it
    with the Firmware Update on it, and put into the iMac could help in the
    process; but you'd have to run the Firmware update after the computer
    itself was physically installed in the drive to flash the computer's ROM
    and upgrade the bootROM firmware to 4.1.9 or whatever your's needs.
    A universally recorded CD-R would work in both a Mac and a PC; Mac
    users have been making these for years, usually on a Mac, of course!
    Discussions and ideas about the failed or non-applied firmware update:
    Firmware problem solver tutorial for slot-loading CRT iMac G3s:
    http://www.capecodgraphics.com/imac_firmware.htm
    http://www.capecodgraphics.com/pages/macintosh.html
    There are a few different approaches to attempting to solve this;
    one company has a special process and wanted to sell something;
    this following quote is someone's experience from the above link.
    "...I thought, what the heck, it's good as dead already... why not try one
    more thing? So, I held down the Programmer's button on the side of the
    iMac while starting it up.. and bingo! It didn't shut down this time! The
    screen was black, but it was up and running to some extent. I hooked up
    a PC monitor to the iMac and saw the Open Firmware screen. This was
    pretty exciting, until I realized that it was not accepting any input from the
    keyboard or mouse. What now? I stuck my OS 9.2 CD into the slot, did
    the "3 finger salute" reboot, held down the C key and prayed harder than I
    have in a while.... and eureka! The CD booted the iMac successfully! I
    was able to do a clean install of the OS to upgrade it from 9.0 to 9.2,
    restart the Mac; then upgrade its firmware..." -- may not be repeatable.
    Anyway, hopefully you get more feedback on this and a resolution solution!

  • Upgrading of service packs

    How would I upgrade the nw04 sp2 to higher versions?

    Hi
    You can also have a look at the relevant upgrade guide at http://service.sap.com/instguides -> SAP NetWeaver -> Release 04 -> Upgrade ->
    1. Log on to the SAP Service Marketplace website --- Http://service.sap.com
    2. Software Download>Support Packages and Patches>SAP Support Package stacks
    3. Select the appropriate system (Example: mySAP ERP 2005)
    4. New window lists all the components in the selected system.
    5. Uncheck the “Restrict according to Usage”
    6. Select the components for which you want to apply support packs and click “next Step” button.
    You will get the required SAR files.Uncar those files you will get two folders jee-cd and sapinst,run the sapinst and import java patch.
    any issues ...............let me know

  • Issue while using views in Data services Jobs

    Hi,
    In Data Services Job, i am trying to pull data from a view to a table. The view is pointing to the table which is in other database.
    The problem is when i import the source view into data services and view the data, i found one row having wrong data. The values in that row are wrong/corrupted while the same row in the source table is having correct values
    I queried the view from TOAD for that record. The values are valid.
    The data is coming wrong only in Data services. Any row in that table gets corrupted, there is no specific row.
    Hence while running the jobs i am getting errors.
    Any idea what can be the reason of getting corrupted data in view while same view when queried from TOAD gives correct values?

    hi,
    There is a possibility of unsupported data type by data service, please share the data service version,  database type and data type of column which got corrupted.
    Regards,
    M Ramesh

  • Issues While Attempting to Clean Install Yosemite onto 2010 iMac 27"

    Having a number of issues trying to clean install Yosemite onto a 2010 iMac 27.
    The original 1TB HDD was about to die so I upgraded the hard drive to a Crucial SSD, via an Apple Authorized shop
    Memory was also upgraded to 16GB (from the original 4GB)
    The install process won't finish, as I get a disk error message from the computer
    Since there's no fan control cable attached to the HDD anymore, the fan is on constantly (but I know this is a known / common issue so I will be fixing it via an app like HDD Fan Control)
    The installation process keeps starting over
    What is causing this installation issue? How can I fix and move forward?
    Thanks in advance for help anyone can provide.

    I've also tried an alternate method of installing - installing Yosemite onto an external hard drive then cloning this drive onto the SSD installed on the iMac. The computer keeps rebooting. This is the message that pops up. Growing increasingly frustrated. Is this a hardware issue related to the new SSD?

  • Tap0.device issues while attempting to start bridged network

    i'm trying to get the bridged network working so i can run xen and everytime i try sudo netctl enable xenbridge-dhcp i get this error in journalctl.
    -- Logs begin at Wed 2013-05-15 14:16:16 PDT, end at Tue 2013-05-28 18:26:42 PDT. --
    May 28 18:25:07 kimbra sudo[23762]: pam_unix(sudo:session): session closed for user root
    May 28 18:25:12 kimbra sudo[23764]: jd : TTY=pts/1 ; PWD=/home/jd ; USER=root ; COMMAND=/usr/bin/netctl start xenbridge-dhcp
    May 28 18:25:12 kimbra sudo[23764]: pam_unix(sudo:session): session opened for user root by (uid=0)
    May 28 18:25:12 kimbra systemd[1]: Expecting device sys-subsystem-net-devices-tap0.device...
    -- Subject: Unit sys-subsystem-net-devices-tap0.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/li … temd-devel
    -- Unit sys-subsystem-net-devices-tap0.device has begun starting up.
    May 28 18:26:42 kimbra systemd[1]: Job sys-subsystem-net-devices-tap0.device/start timed out.
    May 28 18:26:42 kimbra systemd[1]: Timed out waiting for device sys-subsystem-net-devices-tap0.device.
    -- Subject: Unit sys-subsystem-net-devices-tap0.device has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/li … temd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
    -- Unit sys-subsystem-net-devices-tap0.device has failed.
    -- The result is timeout.
    May 28 18:26:42 kimbra systemd[1]: Dependency failed for xen bridge.
    -- Subject: Unit netctl@xenbridge\x2ddhcp.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/li … temd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
    -- Unit netctl@xenbridge\x2ddhcp.service has failed.
    -- The result is dependency.
    May 28 18:26:42 kimbra sudo[23764]: pam_unix(sudo:session): session closed for user root
    tap0.device is not working and i can't find the uml_utilities package anywhere.
    help?

    Sorry for the rather late response, but I've just been through this issue myself. The tunctl & brctl utilities are now part of 'uml_utliities', which is itself deprecated.
    I downloaded uml_utilities and installed it.
    I've encountered a bug which appears to be common to all bridged netwroking (the inbuilt VirtualBox bridging demonstrates the same problem). The nature of the bug is that if I bridge with the physical ethernet adapter, only a linux guest VM can see the outside world. THis is true whether the guest is running under VirtualBox or KVM so the issue appears to be generic.
    Non-linux guests can see each other and the *host*, but not the rest of the world. Speculations as to the reason include the deprecation of Uml_Utilities, but regardless, I tried something different.
    I created the bridge and assigned it a separate subnet. I added some tap interfaces. I ran a DHCP server instance listening on the bridge alone. I set forwarding on, and created a static route enabling my router to find the virtual subnet.
    I used dnsmasq for the DHCP as it isn't used by my regular network setup, meaning that I can screw around with it trivially without breaking things. Additionally, I set up the config automatically from my vnet script. I can potentially add multiple virtual subnets this way although I haven't included support in the script as yet. The minimal config hands out addresses from the pool specified on the vnet command line, and I can set up static addresses on the same subnet by referencing the contents of /etc/host and /etc/ethers (it identifies vms by mac address).
    This works perfectly, and has the advantage that the virtual network traffic will route via wireless as well as cabled ethernet. It also makes it simple to firewall the virtual subnet and reduces the risk of experiencing minor hassle when my broken vnet code stuffs the ethernet interface.
    Ping me if you want a copy of the vnet script, although it's still very much a work in progress.
    Last edited by salafrance (2013-09-21 20:02:12)

  • While attempting to upgrade to Firefox 4, when prompted to drag icon to Applications, the Firefox icon has a white circle with a line through it, why?

    I'm trying to load updated Firefox 4, when the blue drop down menu with the firefox icon and Applications folder icon (prompt to drag firefox icon to apps folder) the firefox icon has a white circle with a line through (like a "do not enter" symbol)

    Hello puma1552,
    Are you referring to the *Do Not Disconnect* screen display while your iPod is plugged into and syncing with iTunes? Check out this Apple support document for its meaning and why you are receiving this icon. This icon always appears when you are syncing your iPod with iTunes. It's basically a warning message telling you that the iPod is currently in use and should not be removed.
    http://support.apple.com/kb/HT1378
    B-rock

  • I am trying to upgrade Windows service pack 2 to itunes 11.1.3, so I can access outlook and backup my outlook calendar to recently purchased 5S. Unfortunately at the end I get message " could not access network lo

    The WindowsXP service pack2 is my operating system on the destop.

    Many thanks.
    The exact message was " could not access network location itunes\".
    Although you're getting a different error message, try the following user tip with that one:
    "not a valid short file name" and "invalid character" install errors

  • Issue while configuring cache management -/osb/service/ResultCache

    Hello, I am trying to configure cache data management through OEM console of 12.1.0.2 version . While executing a coherance select query, I am getting below error message
    "Error occurs while executing the "view" operation. CacheDataManager custom MBean is not registered with the Oracle Coherence JMX Server during startup. The custom MBean is available with the coherenceEMIntg.jar."
    I have even included these jar files in my coherance server startup parameters ..
    <>/agent12c/plugins/oracle.sysman.emas.agent.plugin_12.1.0.3.0/archives/coherence/coherenceEMIntg.jar:
    <>/plugins/oracle.sysman.emas.agent.plugin_12.1.0.3.0/archives/coherence/bulkoperationsmbean.jar
    could someone pls help on this.

    Hi
    To configure the SCAN , this SCAN IP should be resolve through DNS or /etc/hosts file .Please follow the below link to configure the DNS.
    If you face any problem , then please let me know .
    shivenracdba: configure DNS for Installtion of Oracle Grid Infrastructure RAC cluster
    warm regards
    Shivendra Narain Nirala

Maybe you are looking for