Issue while converting turkish text in PDF via SMARTFORMS

Hello Experts ,
We are currently involved in translating an application to Turkish. Though the translation is completely done, when we test the issue we find that the application is working perfectly with the Turkish text but the transfer of data from application to the PDF via SMARTFORM is not working correctly. We find that the issue is due to 3 characters in Turkish which are (Ğ,İ,ş), We found out that this issue can be resolved using the OSS Note 625818.
However we have another issue which has cropped up.
Wherever certain characters are being printed the characters right after them are printing at the same location and thus overlapping.
For eg:
Whenever the character u201CIu201D is printed it is being overlapped by the character which is supposed to be printed after it instead of printing next to it.
Should be - İN
Currently - both are overlapping
Any idea on how can this be fixed?
when I actually tried to copy the text from PDF and paste it in this email the character u201CIu201D is replaced by the character u201CÝu201D in this email text box.
Please find below the actual text from the PDF. The u201C u201D is seen nowhere and is replaced by the u201CÝu201D.
GÖREVÝN DEGERLENDÝRÝLMES
we have found a solution for the same which is to give a tab space between the İ and N but this will lead to unnecessery space in the application.
Thank You!
Best Regards
Bonny

Hi,
We cannot print some characters as such, so try converting it to string or char then go for PDF.
Check the below link and note:
[Cannot extract the embedded font arial.Some char might not be displayed;
Thanks,
Renuka.

Similar Messages

How can I retain hyperlinks while saving a webpage as PDF via Print?

How can I retain hyperlinks while saving a webpage as PDF via Print?
This is the title of an apple forum question, and it is a bug in both Safari 5.1.3 and under, and I find it to also occur in Firefox browser (at least 9.* 10.*, 11.0), running on Lion OS (10.7.2, 10.7.3). See:
https://discussions.apple.com/thread/3212301?start=0&tstart=0
Under the newer Mac OS mentioned, and Firefox 10.2, 11.0, 9.*, if I select:
File -> Print -> PDF -> Open PDF in Preview"
(and view / save the PDF in Preview, you will see none of the links in the original web page are active
or using
File -> Print -> PDF -> Save as PDF...
same problem. Try this using any Wikipedia page, for example.
When this problem was posed in Apple forums, by a user of the Safari browser, it was found to be a bug (since Aug 2011) fixed in a Safari browser build 5.1.4 circa Jan 2012. I tried the newer Safari browser and sure enough the problem went away (except that links embedded in the PDF no longer appeared as blue text - ARGH - but "hover over" with the cursor showed the link and clicking the link in Preview viewer activated the link in a browser window).
So I post this to the Mozilla community, please fix this 'cause I don't want to have to switch over to Safari browser every time I want to archive a PDF with active links!!!!
P.S. I did a spot-check and with the newer add-on Enjoy Reading 1.0.1 and FF11.0. When the Enjoy reading formatted version appears in the browser window, all URLs/links are preserved and highlighted in blue, but when I print that browser window as PDF, the links are dead (don't work) even though they appear in blue in the PDF.
So, what's going on, can the Safari fix be researched and applied to FF?
Also, on some forums, people are responding, Well, try installing Acrobat reader. Well, I don't want to, Preview reader has worked fine for me for years.

Thanks jscher2000.
RE: -- '''Generally speaking, PDF converters that work by intercepting a print job do not have access to the URLs behind links in the page.''' --
I cannot say I agree. I could email you a PDF clipping or two (generated from Safari on Mac OS, in its native capability with no add-ons) that shows you otherwise. When I used PC platforms I did have to install PDF converters (tried both free and expensive ones) that did what I describe.
I cannot try the add-on you mention, '''Print Pages to Pdf.''' in Firefox. It shows in my browser and Mac OS platform "Not available for your platform." So I am guessing it was written for the PC version of Firefox.
The Mac OS has had a native PDF-creation functionality for as many years as I have been using it; I used PC prior to that, Win3.1 through XP and NT. And on my PC, I bought (and at work, my employer bought $$$, I had to justify three levels up to management the ability to create PDFs on my work PC) some Adobe functionality to CREATE pdf's (readin's free and easy, makin' em's costly on the PC).
I've gone and dug through some of my (Mac) doc and clipping archives, and I find that stuff I created after about Dec 2008 or so seems to eliminate all link functionality. When viewed in the Apple native "Preview" application (sort of Apple's equivalent to Adobe Acrobat reader, ships with the OS): link tags are highlighted/tinted, clicking a link opens a (default) browser and takes you there; hover-over the tag text shows the actual link. (Of course, not all old links are still VALID or point to the desired source.)
I could, in Safari or FF browser window and with no add-ons or Adobe paid products whatsoever, use the native OS method to create PDF's from any application (word processor, spreadsheet, browser, etc) via the menu File -> Print -> Save as PDF menu and create a PDF that had active hyperlinks. In Apple OS Lion 10.7.3, I still can't when it uses this broken WebKit interface, links are "dead" as a doornail until a fix is distributed in WebKit for a future Lion release. It seems this functionality died at least as far back as Leopard OS 10.6.8, but don't quote me on that. Also, my version of Pages 2009 version 4.1(923) (sorta like Word) STILL creates a PDF document that preserves (1) text hyper-links within the document, and (2) web links (in the PDF) that open the browser. I just made a test document.
When all you can see in the PDF is the tag text, there is nothing to copy-paste to follow any link. Also, hypertext links are often used by authors to create links to other points in a document: now even *that* is broken in the PDF version of the documents I retrieve from the web and print from FireFox (Broken in Safari 5.1.3 and earlier but fixed in 5.1.4).
Try this on the PC, in your browser and print a news clipping as PDF, do the links in the PDF work? What products do this, and what don't? I would bet the machine with a full Adobe suite this will work flawlessly. (Why should a PC user have to pay hundreds of $ to create this functionality in what I thought was an open standard (PDF)? But that's talkin' religion, let's not start that.)
Some folks might say,
go online and find the original source doc in your browser. Or,
go and add those links manually using the Preview edit add-link capability (hunh? no thanks) , or
save each item worth saving as an HTML archive instead of a PDF (argh, creating a whole directory in the process, I might add, including ads). Or,
who needs PDFs, everything is online.
Or, buy some Adobe product.
I think they miss my point. This is a real strange dumbing-down of archival PDF documents, or at least a destruction of the ability to use PDF as an archive that retains its links and references.
C.F. the guy who has archives of scientific papers, and the old material all cross-references nicely but after date X there are no working links.

Error: EXOpenExport() while converting xlsb file to PDF

I am getting this error while converting .XLSB file to PDF using IBR :Step PDFExport forced conversion failure by conversion engine because of error: EXOpenExport() failed: no filter available for this file type (0x0004). Can anyone tell me how to resolve this issue.
Thanks in advance.

Thank you for all your intrest.
The error message I get is... "an unexpected error occured. PDFMaker was unable to process the request".
When I then try to convert again, the system opens the ppt, but then does not do anything, and the error message does not show, for all presentations I try to convert.
I have also tried using the ribbon, but the button does not do anything once I have clicked.
I can print to PDF, but this provides an output which is not suitable, because it shows as if it each slide was printed on to paper and then put in PDF.
I have also uninstalled and reinstalled Acrobat to make sure nothing was corrupt.

After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF

That happened after upgrading Acrobat Pro 9.1.2 to 9.2->9.3 on Windows XP sp2 platform. Converting from other Microsoft Office 2003 products is totally normal(Excel, Word) Did anyone came accross and know how to fix that?? We have many users with exactly same issue.

thanks...figured out my problem!
Date: Wed, 3 Feb 2010 12:24:29 -0700
From: [email protected]
To: [email protected]
Subject: Re: After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
What happens if you try to print to the Adobe PDF printer?
>

How to use .joboptions file while converting from Word to PDF

Hi,
I'm pretty new to Acrobat. I'm using Acrobat XI. I need to convert a word document to a PDF file which conforms to certain requirements described by a given .joboptions file. The .joboptions file can be opened by distiller, but as far as I know distiller is not invovled in the conversion (Word to PDF) process. So how can I make sure the converted PDF file meets the requirement described by the .joboptions file?

Distiller is used when converting from Word to PDF, if you do it via the Acrobat panel, not the Adobe PDF printer or Word's internal Export to PDF command. If you've loaded your joboptions file in Distiller (via Settings - Add Adobe PDF Settings), then you will see it in the drop-down of Conversion Settings when you click the Preferences button in the Acrobat panel in Word.
After you've selected your job options profile click the Create PDF button, and the file will be converted using the selected options.

Issues while converting Purchase Req to PO

Hi guys,
I am getting a weird error while converting PRs to POs. It is adopting all the fields except account assignment category, GL account and the cost center. Please help.
Thanks and Regards
Madhu Vutukuri

Charlie,
Thank you very much. Its a doc type issue. I appreciate your help.
Regards
Madhu Vutukuri

Issue while saving long text through MS Word Editor in SAP

Hi All,
I am facing some issue while saving text through Word editor in SAP(like Notes in Installation or Long Text in device location).
After entering the text, when I am pressing the Back button, it says text transferred successfully, but when I try to see the text again, its not in the proper format.
Every time I go to the word editor, some text is deleted.
Thanks in advance for your help.
Manoj Vatwani

Hi Manoj,
Can you share some screenshot for the formatting issue that you are facing.
Thanks,
Amlan

Issue while converting a word document into a PDF using PDF Maker Plug-In

Dear All,
When I try to convert certain set of microsoft office document files of version 2003, I get an error message/ Exception thrown from the PDF Maker Plug-in, the snap shot of the exception is attached below,
please suggest...
Note:
The Acrobat Version is "Adobe Acrobat 9.2"
Microsoft Office 2003 Files
Operating System: Windows 7 OS
Regard's
Amith Sai

Hi Amith,
What version of Office are you running? I understand you have Office 2003 Documents, however, is this the same version of Office you are running on the system?
Regards. D.

Page size issues while saving Deski report to PDF

Hi All,
While saving the Deski report as PDF, the page size changes randomly.
The workflow is:
Created a report in Deski.
-- Chekced in File | Page setup the zoom size(Fit to Print | Adjust to) is 100% and the paper size is A4.
-- Saved it as PDF.
-- In Acrobat Reader 7.0, opened the save report, the size of paper is 8.5*11, the normal paper size.
-- In the report in theFile | Page setup, changed the zoom size to anything less than 100% (e.g changed to 90%) whereas the paper size is A4.
-- Saved it as PDF.
-- In the Acrobar Reader noticed that the page size increases to some random size(e.g 9.18*12.99).
When priting the Document the printer changes the same to A4 resulting in truncating of the content.
The page size should be same but the content size should reduce.
The issue can be reproduced in 6.5 and XIR2 as well.
Is there any workaround for this that the size of the content decrease rather than increasing the page size??

Hi Sarbhjeet,
Thank you for all your help.
Further to our investigation we found that this is known issue and it is a limitation of the Product, it wont be fixed.
The ADAPT for the same is ADAPT00743734
It is reproducible with XI 3.1 as well.
FYI...........
1. PDF Engine will get the rendering information from the busobj. If there is a character size differences between PDF and busobj, there are chances that you may see bigger cells or reduced data in PDF.
2. In the report when Fit to 1 page by 1 wide in Pagesetup->FitToPrint, the page size will be set to the fit the complete report in busobj.
3. When save as PDF, this information (increased page size, due to settings in 2) will be sent to PDF Engine. The Engine will try to fit the size into the available standard PDF size (based on Print settings and other combinations).If it tries to fit the report (enhanced page size) to the available size, then we loose lot of information depending on the number of columns and rows.
4. Shrinking the report in busobj may not feasible.
When we change the page size in Fit to Print (either Adjust to % or Fit to ) , in reporter it changes the page size instead of changing the rendering to fit to the page.
When save the report to PDF, it gets the information with extended page size. So we see the enhanced page in PDF.
Also in order to implement the shrink (instead of changing the Page size), each cell has to be shrieked to the percentage of the reduced page (compared to the original page size). It becomes more complicated when charts come to picture.
I hope the above information helps.
Thanks & Regards,
Anisa

Issue while Signing and Encrypting the PDF Document.

Hello,
I am developing one component in VC++(MFC) which signs and encrypts the pdf documents.
When i sign and encrypt pdf document using my component, I am getting following error while opening the document in Adobe Acrobat
Error during signature verification
Unexpected byte range values defining scope of signed data.
Details: The signature byte range is invalid
But if i open that document in binary mode and calculate the byte range its looking correct.
The Process for signing and encrypting the PDF document is as follows :
1)Prepare the PDF document for signing (Add Annotation objects,n0,n2
layers,create blank signature field,new xref section etc.)
2)Encrypt the whole document(Password based encryption).
3)Put the ByteRange values.
4)Write the signature in blank signature field.
If i just perform encryption(128 bit RC4 Algorithm) on the pdf document its working fine.Only after adding the signature objects i am getting above error.I think it means something is wrong in signature related objects,but i am not able to recognize the exact problem.
So what can be the issue?
Please Help
Thanks in Advance
Priyanka

I am sending the Sample Files
blank.pdf file is a original file
http://www.2shared.com/file/4677649/3f341d92/blank.html
step 1: I am adding Signing object(without data in Contents<> key) in
blank.pdf file.
Output File is Prepared-blank.pdf
http://www.2shared.com/file/4677648/48332d04/Prepared-blank.html
step 2: Sending Prepared-blank.pdf file for encryption.
Output File is SignednEncrypted-blank.pdf which is Encrypted and Signed.
http://www.2shared.com/file/4677647/d88c3095/SignednEncrypted-blank.html
Password for opening SignednEncrypted-blank.pdf is : "a".
Please help.
Thanks.

"Rep-0999 Unimplemented Error" while converting a report to PDF format...

i have developed a number of complex reports with several queries and formula objects, all running successfully and converting to other formats accuratelly.
i have report of Accounts Receivables, a complex one, running near about 10 queries and 7 formula column database functions to calculate values for each row return, this report works accuratelly and converts to other formats easily but takes full 60 to 70 seconds to run the report.
management asked me to enhance the performace of this report,
i had worked out and reduce the number of queries and formula columsn to one single query with 5 nested(union queries) queries. execution times reduces to 3 to 5 seconds with accuracy.
Report displays correctelly but give an error "Rep-0999 Unimplemented Error" whenver we converts it to pdf or other sources.
While other complex reports were still converting successfully.
Help me out of this problem,.... im hands up at this situation.
bye

Thank you Piyush!
It really works, you idea and understanding is 100% accurate,
i have lexical variable, to whom i assign two values either "<> 0" or "is not null",
i had omitted the space from "<> 0" and make it "<>0", now it works properly,
only one confussion left, if i pass "is#not#null" from form, how can i can convert it on report to "is not null",
once again thanks a lot

Missing page while converting Postscript files to PDF using Distiller 9.

Hi
Due to some incorrect hexadecimal code in the post script, one of the pages is not getting created in the full pdf. So, we can say that the page is missing in the complete pdf file.
Here is my snapshot of the issue:
1. Offending command issue on a particular post script data is coming up due to some incorrect hexadecimal data.
2. If I run the postscript through Distiller 8, report is getting generated without any missing data.
3. Whereas, if I run it throught Distiller 9.1.3, Distiller is ignoring the page due to following warning.
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
41
( À
4. If I run the same Postscript file in Distiller 9.3 (latest version), issue is going away.
5. But I have another Report pdf with the same issue but this time with a different hexadecimal exception.
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
49
(à øÀ øÀ øÿ€ üÿ€ üÿ€ üÿ€ üÿ€ þÿ€ þÿ€ þÿ€ þÿÀ þÀ þà þø?þ?ÿÿþ?ÿÿþ ÿÿþ ÿÿþ ÿýþ ÿùþ?ðà øÀ øÀ øÿ€ üÿ€ üÿ€ üÿ€ üÿ€ þÿ€ þÿ€ þÿ€ þÿÀ þÀ þà þø?þ?ÿÿþ?ÿÿþ ÿÿþ ÿÿþ ÿýþ ÿùþ ü%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
So, either way, even if I upgrade my version of Acrobat from 9.1.3 to 9.3, issue doesnt go away. I think the new Acrobat Distiller is buggy and introducing new problems when compared to Acrobat Distiller 9.
1. Works fine Distiller 8.0
2. More problems with 9.1.3
3. Lesser problems with 9.3 but I cant upgrade to 9.3 unless i see all the missing page problem going away.
Can someone urgently look into this?
Regards
Hari

I am calling Distiller using command line.
"C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrodist.exe" /f/Q/N C:\Reporter\debug\report.dst
report.dst contains the the names of the post script files.
(I have already contacted Distiller server forum and I was told to post the request in Acrobat forum)

Page format problem while converting spool job to PDF file

Hi,
I convert the sapscript from spoollist to pdf with the FM CONVERT _ OTFSPOOLJOB _ 2 _ PDF giving the spool id but I can not get the file properly. It adds a raigth margin to the PDF file.
Should I call aany other FM to format the PDF file ?
Thanks.
Utku.

Hi,
I have executed the report and the PDF file has the right margin.
In the properties of PDF file it says PDF version 1.3 (Acrobat 4.x) and Page Size 11.69 in x 11.69 in
Also I open the PDF file with Acrobat 5.0
Thanks.
Utku.

Text added PDF via Preview disappears

I am using Preview to take notes on PDF's for med school. After I save it to iCloud or whatever and open them later the text box get smaller and does not show the text. I have to go to Inspector to see where my notes are so I can fix them. What is going on???

I am with you 100%. This did NOT used to work for me but I decided to give it a shot since this person was saying it worked for them. It works now and I'm happy but they must have fixed this in a recent update.

Issue while manually entering texts into 0DOCTYPE info object

Hello Guyz
I have a peculiar problem while loading texts into 0DOCTYPE. In R/3 the 0DOCTYPE table looks like:
0DOCTYPE (bsart)   0DOC_CAT(bstyp)         Texts
AB                                A                           Request for GP bid
AN                                A                           RFQ
FO                                B                           Framework requisn.
FO                                F                           Framework order
LP                                 L                           Scheduling agreement
LPA                               L                          Scheduling agreement
From the above values, we can clearly notice that 0DOC_CAT is a compounding char to 0DOCTYPE and maybe (vice versa). But we dont have this on the BW side, and the 0DOCTYPE has been used in many cubes DSOs and t/f rules. Now, when I have to load text, I need to turn that on and this throws an error that I cant do it now, because these IOs have been used in all these data providers.
Is there any other way I can do this? Having 0DOC_CAT as an attribute of 0DOCTYPE does not help because that only affects the attribute table, and not the text table.
Please advise.

Hi,
If you do not want to disturb the existing cubes / DSO containing 0DOCTYPE then probably you can create a new InfoObject like ZDOCTYPE with the required compunding key. Load the Master data text to this infoobject from the existing Text DatsSource.
Use this Z infoobject in the Cube or DSO for which you want to display text in the Report.
This will lead to a bit of redundancy but it allows you to go ahead without changing existing objects.
Regards,
Amrita

Issue while converting turkish text in PDF via SMARTFORMS

Similar Messages

Maybe you are looking for