Issue while creating a heirarchy using Hierarchy Structure Time dependent

Hi every body
I created an Info object(SREP) with Heirarchy Strututre Time Dependent property. When i am creating an Heirarchy for the info object(SREP) i am not able to see any text node by default, do we need to create it explicitly or system would propose one node by defalut..
I created a text node manually then and tried to assign an another info object(SREG) as a child using an option of "Insert Characterstic", but i am getting a message as "InfoObject SREG is not entered for InfoObject SREP as a Foreign Heirarchy Characterstic", and system is again proposing to assign some info object as a child.
Thanks in advance..
sekhar

Similar Messages

Issue while creating Outbound Delivery using Standard BAPI

Hi all,
I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
Regards,
Vimala P

Hi Vimala,
I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
1) Delivery Type
2) Delivery selection date
Needs to be passed in import parameters.
Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
Thanks in Advance..
Regards,
Rajasekar .M

Confirmation Quantity issue while creating Sales order using BAPI

Hi SDN,
Can anyone of you help mein the below issue:
I have a program to create a sales order using upload file. for this i use "BAPI_SALESORDER_CREATEFROMDAT2" & for changing existing "BAPI_SALESORDER_CHANGE".
Now If the upload file contains the Same Material, Based on other conditions, it needs to create Multiple sales order.
When the first Salesorder is created, the Quantity is getting confirmed (Confirmed quantity VBEP-BMENG). But during actual run, since the confirmation is getting done for the same material in the above Sales order, the confirmation is not being done in the subsequent Sales order".
This poses a problem for business, user need to manual refresh the u201Cconfirmed quantity for each line item in the particular SO where it failed during program upload.
Also while uploading using the BAPI, if we wait forsometime after creating the first sales order in Debug, then the above material is unlocked & the confirmation quantity is done for the subsequent sales order also.
But in the actual run, this is creating a problem. Some Refresh or Unlocking problem.
Can you please suggest a suitable solution for this issue.
Thanks & regrads,
Chaitanya LBK

Have you tried backorder processing?
V_V1
V_V2
V_RA
V_R1
V_R2

Facing issues while creating Debit memo using FM SD_SALESDOCUMENT_CREATE.

Hello,
           While trying to create a debit memo with reference to a Billing document with help of Fm SD_SALESDOCUMENT_CREATE I'm facing two issues.
1. While the Debit memo is succesfully created - and VBELN of VBAK is getting updated- the doc flow table VBFA is not getting updated with the debit memo number.
2. The condition price values that're being displayed in the Debit memo are completely different from the ones that I'm passing in the FM.
My FM i/p is as follows:
SALES_HEADER_IN- REFOBJTYPE -ZSB1
                                 REFOBJKEY - billing doc num
                                DOC_TYPE - ZDRM
LOGIC_SWITCH-COND_HANDL
SALES_ITEMS_IN - Item details like material, quantity, UoM, etc.
SALES_CONDITIONS_IN-ITM_NUMBER - Condition item no ( taked from T-code V/08)
                                        COND_COUNT - Cond count ( " )
                                        COND_TYPE - Condition type
                                        COND_VALUE - value
                                        CURRENCY - currency
                                        CONDVALUE - value
                                        CURRENCY_2 - currency
SALES_CONDITIONS_INX -ITM_NUMBER - Cond item number ( same as above)
                                           COND_ST_NO      same as above
                                           COND_COUNT     same as above
                                           COND_TYPE       same as above
                                           COND_VALUE - X
                                           CURRENCY - X
Please help me overcome this issue.

Hello,
           While trying to create a debit memo with reference to a Billing document with help of Fm SD_SALESDOCUMENT_CREATE I'm facing two issues.
1. While the Debit memo is succesfully created - and VBELN of VBAK is getting updated- the doc flow table VBFA is not getting updated with the debit memo number.
2. The condition price values that're being displayed in the Debit memo are completely different from the ones that I'm passing in the FM.
My FM i/p is as follows:
SALES_HEADER_IN- REFOBJTYPE -ZSB1
                                 REFOBJKEY - billing doc num
                                DOC_TYPE - ZDRM
LOGIC_SWITCH-COND_HANDL
SALES_ITEMS_IN - Item details like material, quantity, UoM, etc.
SALES_CONDITIONS_IN-ITM_NUMBER - Condition item no ( taked from T-code V/08)
                                        COND_COUNT - Cond count ( " )
                                        COND_TYPE - Condition type
                                        COND_VALUE - value
                                        CURRENCY - currency
                                        CONDVALUE - value
                                        CURRENCY_2 - currency
SALES_CONDITIONS_INX -ITM_NUMBER - Cond item number ( same as above)
                                           COND_ST_NO      same as above
                                           COND_COUNT     same as above
                                           COND_TYPE       same as above
                                           COND_VALUE - X
                                           CURRENCY - X
Please help me overcome this issue.

Issue while creating BPEL artifacts using BPEL command line tool

All
I am trying to create BPEL artificats for SQL server stored procedure for SQO Server 2005 using BPEL Command line tool.
My demo.properties is
ProductName=Microsoft SQL Server
DriverClassName=com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionString=jdbc:sqlserver://10.10.20.2:1433;databaseName=dAP
Username:apcdb
Password:password1
SchemaName:dev
ProcedureName:spiSOATesting
ServiceName:SQLServerSPService
DatabaseConnection:MSSQLServer
Destination:c:/temp/sqlprocedure
and I have create a batch file called as generate.bat and it contains following information
java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\jlib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %1
and when I try to run the command at BPEL PM Developer Prompt, I am getting Procedure not found, Can one please tell, what is the cause of this error. and how does this command line tool exactly work.
Following is the output from command prompt.
D:\product\10.1.3.1\OracleAS_1\bpel\samples>D:\temp\sqlprocedure\generate.bat D:\temp\sqlprocedure\demo.properties
D:\product\10.1.3.1\OracleAS_1\bpel\samples>java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar
;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\j
lib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts D:\temp\sqlprocedure\demo.properties
Procedure not found: dAP.spiSOATesting
Thank you

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Facing issues while creating excel plugins using dotnet

Hi All,
I am working on the design of a Project and Need help. Appreciate a quick Response.
The requirement goes like this -
We Need to create a custom menu in Excel, after clicking on this menu item, dotnet code will be invoked from where some data has to be retreived from a Client site using webservices. This data must be displayed in the Excel sheet.
Question:
I have been successfully able to create a custom menu but when I try to add an Event such that an Action happens when the user clicks on the menu item, it throws an error - "Cannot assign to 'MenuItem_Click' because it is a 'method group'"
MenuItem_Click += new Microsoft.Office.Core._CommandBarButtonEvents_ClickEventHandler(MenuItem_Click);
I have added the following methods -
private void MenuItem_Click(Office.CommandBarButton Ctrl, ref Boolean CancelDefault)
MessageBox.Show(String.Format("You just clicked the button labeled '{0}. \n" + "The name of your workbook is '{1}'.", Ctrl.Caption, ThisWorkbook.name),
"MenuItem_Click",MessageBoxButtons.OK,MessageBoxIcon.Information);
private void ThisWorkbook_Startup(object sender, System.EventArgs e)
InitMenuBarItems("&Custom Code");
MenuItem = CreateButton((Office.CommandBarPopup)MenuBarItem, "Run Demo Code");
MenuItem_Click += new Microsoft.Office.Core._CommandBarButtonEvents_ClickEventHandler(MenuItem_Click);
Could anyone help me resolving this problem?
Any help is highly appreciated.
Thanks in advance.

Hello,
Starting from Excel 2007 the Fluent UI (aka Ribbon UI) is used. Command bars were deprecated, you need to use the new UI instead. See Ribbon Overview for more
information.
VSTO provides two main ways for customizing the ribbon UI:
1. Walkthrough: Creating a Custom Tab by Using the Ribbon Designer
2. Walkthrough: Creating a Custom Tab by Using Ribbon XML
If you need to customize context menus, see Customizing
Context Menus in Office 2010 .
The Fluent UI is described in depth in the following series of articles in MSDN:
1. Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
2. Customizing the 2007 Office Fluent Ribbon for Developers
(Part 2 of 3)
3. Customizing the 2007 Office Fluent Ribbon for Developers
(Part 3 of 3)

How to: from time independent hierarchy to time dependent hierarchy in BW

Hello goeroes outthere,
I am facing the following problem and was wondering if some of you have faced the same issue.
In ECC we have a time independent hierarchy on Profit Center. Our customer wants to perform time DEPENDENT reporting in BW.
As the standard datasource does not support to be loaded via PSA in the datasource definition (only IDOC) we cannot enhance the datasource with fields such as DATEFROM and DATETO. I've tried doing so but this results in the following error message when loading : Selected number does not agree with transferred number of records.
So I have cancelled out this as being an option.
I am analyzing the following two options :
1. Making the hierarchy time dependent. (globally). The idea would be to create a custom ABAP program that would copy the loaded hierarchy to a hierarchy in which we define the datefrom as the actual system date and the dateto as 31.12.9999.
Prior to doing so the abap program should change the already loaded hierarchy by modifying the dateTO as actual system date -1 in the header of the hierarchy.
In theory this seems to be a good option, but I am afraid of the complexity of the ABAP program to be created by looking in debug how the copying process is handled in SAP.
2. Making the hierarchy structure TIme dependant. THis has as a consequence that the table /BI0/HPROFIT_CTR is adjusted to include DATETO and DATEFROM fields. A custom program could read the entries and perform the same activities as described above. So meaning finding and modifying the existing entries with DATETO fields with as an entry 31.12.9999 to adjust to sysdatum -1 and modfying all entries that don't have dateto and datefrom entries by putting datefrom (=sysdate) and the dateto (=31.12.9999).
The issue here is that first we need to find the link between the hierarchy ID and the Hierarchy loaded and that I am not sure how SAP will deal with this SID wise.
Option 1 seems feasable as the hierarchy does'nt change every single day and doesn't require to be loaded every single day. But before going in this direction, I would appreciate some confirmation of my approach.
Thanks in advance for sharing your lights on this topic.
Rgds,
Bvpe

Hi Bart,
I just solved this very problem today in a two step process:
In our implementation, we only want to control when a new version of the hierarchy is created. If nothing changes, whatever is brought in from the source system will just replace the current version. We imagine we'll only create versions at month end or major re-organization.
1) I created a Select Options variable in tcode: stvarv called ZPROFCTR_FROMDATE. I added a value to the low position and set the option to equals.
2) Open the infoPackage that is used to load the hierachy from the source system. Go to the Hierarchy Selection Tab and click on the button at the bottom of the tabbed frame "Dynamic Hierarchy Selections".
You should see two check boxes, place a check in the second box: "Determine Using Routine" Click on the create icon and put this in the routine
p_s_sel_hier = l_s_presel_hier.
data: tempfrom type tvarv_val.
select single low
from tvarvc
into tempfrom
where name = 'ZPROFCTR_FROMDATE'.
move tempfrom to p_s_sel_hier-datefrom.
p_s_sel_hier-dateto = '99991231'.
clear p_subrc.
I've include the entire subroutine for context, and so you can see the SAP generated coments in the form that attempt to explain what the form is going to do.
Long story short, the hierarchy you have selected with the radio button on the Hierarchy Selection tab will be the one that is affected by this logic.
form compute_hier
tables l_t_all_hier structure rshiertrsf
using l_s_presel_hier like rshiertrsf
        l_infopackage   type rslogdpid
changing p_s_sel_hier like rshiertrsf
           p_subrc like sy-subrc.
*Insert Source Code to decide which Hierarchy shall be loaded.
*The Hierarchy you select from table l_t_all_hier and fill
*into p_s_sel_hier will be loaded.
*The Structure l_s_presel_hier contains the pre-selection of the
*BW-Scheduler - just to inform you what the BW wll load
*if you change nothing.
*$*$ begin of routine - insert your code only below this line        *-*
p_s_sel_hier = l_s_presel_hier.
data: tempfrom type tvarv_val.
select single low
from tvarvc
into tempfrom
where name = 'ZPROFCTR_FROMDATE'.
move tempfrom to p_s_sel_hier-datefrom.
p_s_sel_hier-dateto = '99991231'.
clear p_subrc.
*$*$ end of routine - insert your code only before this line         *-*
endform.                    "compute_hier
Hope this helps,
Quack

Issue while creating connection pool in weblogic using SERVICE NAME

Found two issues while creating connection pool in weblogic using SERVICE NAME
1. While running apps from jdeveloper using xxx-jdbc.xml
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
2. Configuriing the jndi in Weblogic server
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:SERVICENAME
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
Problem
database url is generated based on SID
eg: jdbc:oracle:thin:@localhost:1521:SID
Solution
(generate seperate url for SERVICE NAME)
jdbc:oracle:thin:@localhost:1521/SERVICENAME
------------------------

It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Error while creating activity by using BAPI

Hi,
While creating activity by using BAPI Im getting error as follows,
Start processing of refference object handle generated.
Integrity rule a d0008 broken
business partner with function from vbkakom not vbpakom
Integrity rule a d0008 broken
edit all incomplete field .
Please help me for solving this issue.
Regards,
Suresh

Not received any proper reply Closing the issue.

Issues while creating a search project in BCC

Hi There,
Migrating the apps from 2007.3 to 10.0.3.Experiencing issues while creating a search project.
Step #1.In Search Administration,navigating through Project > Global Settings & creating a Content Label named as "Catalog"
Step #2.Navigating through Project > Create Production Project.Creating a project with Content Set as "CatalogSet"
Step #3.Adding a Content with this info:
 Content Name: Catalog
 Type of Content : ATG Repository
 IndexingOutputConfig Path : /atg/commerce/search/ProductCatalogOutputConfig
 Host name : localhost
 RMI : 10160 ( RMI port of commerce instance)
 Creating a content & getting the message as New Content "CatalogTest" has been created.
 Issue #1: Content is not displaying in the Content eventhough content has been created successfully.
 Issue #2: Getting error for "Default Text Processing Options"
 You can refer these issues in the attached screenshot "Content-Page-with-error.jpg"
Step #4.Creating a new TPO as "English" & trying to "Associate Search Project" & getting an error.Refer the attached error log "Associate-Search-Project.log"
Due to these issues, "Build Index" button is disabled.Did anybody experienced these issues? Any help/comments are appreciated.
Also attached the full server logs as commerce-server.log & publishing-server.log.
Since no options for attachment in this forum, I posted the attachment in this link.Please refer it.
https://groups.google.com/forum/?fromgroups#!topic/atg_tech/csEHi-x3Nyc
Thanks in advance!
Mani
Edited by: user11263665 on Apr 25, 2012 10:38 PM

We faced the same problem when migrating from 2007 to ATG 10.0.3. The reason this error comes up is because the Search depends on a local customization adapter /atg/searchadmin/adapter/customization/LocalCustomizationDataAdapter which adds English as a language in the text processing options.
After the migration you need to import the initial ATG search related data into your Search schema. These instructions have been mentioned in the ATG install guide. Here is the extract from the docs.
Note: The import scripts import data using startSQLRepository. Make sure your JTDataSource and
FakeXADatasource are configured to permit this in home/localconfig. JTDataSource should automatically
point to FakeXADataSource. FakeXADataSource should point to the administration database, and
FaxeXADataSource_production should point to the production database. Note that some product
installation processes, including Oracle ATG Web Knowledge Manager Self Service, need FakeXADataSource
pointed at the production database, so you may need to change the FakeXADataSource between installations.
once you are done with the configurations above, import only the searchadmindata xml into search schema as this imports the LocalCustomizationDataAdapter config information into your search schema. Once this is done, you should be good to index.
<ATG10dir>\home\bin\startSQLRepository.bat|sh -m SearchAdmin.AdminUI
-repository /atg/searchadmin/SearchAdminRepository -import
<ATG10dir>\Search10.1\SearchAdmin\common\data\initial\searchadmindata.
xml

Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.

I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

Sir,
ply let me know after saving the po i want to know what all messages were issued while creating the po.
Like "warning" or "information" message
where can i see this
regards
amey

Hi,
PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
Here are few message type:
Contract has different purchasing organization &     W
Validity period of contract does not start until &     W
Validity period of contract expired on &     W
Target value of contract & exceeded by & &     W
Net price for item & taken from conditions     W
Purchase requisition & item & already deleted     W
Scheduled quantity & & greater than target quantity & &     W
Quantity smaller than invoiced quantity &     W
Target quantity exceeded by & &     W
Not possible to determine a consumption account     W
Release date lies in the past     W
Base unit of measure & adopted from material master record
Release date: next workday is &     W
Contract target value & reached     W
Please only use plants with company code &
Order unit copied from material master record     W
Hope it helps.
Utsav..

Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

Dear Experts,
My scenario is:
We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment:
Biiling document screen shot:
While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
Now the issue is:
When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
Please see the below screen-shot for the same; The z quantity line items are missing.
We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
Customization is also maintained for creating excise invoice document automatically.
Regards,
Rajesh Sadula.

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Issue while Creating the records in OAF by disabling one field.

Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.

or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna

Issue while creating a heirarchy using Hierarchy Structure Time dependent

Similar Messages

Maybe you are looking for