Issue while creating Absence Quota for one employee

Hi Friends,
Our customer has a weird issue. When time evaluation is run, One Absence Quota type (Leave in Bank) is not getting generated for Only One Employee.
This leave type has been updated with quota in IT 2006 after running PT60 for all other employees in the PA. The issue is only with one employee.
This absence quota is assigned "Increase" in table V_556A_B (Permit Generation of Quotas in Time Evaluation)
Can any one please suggest how to generate the missing quota for this employee. Thank you !!

Hi
Thanks for your replies !!
Please find the screenshots attached.
Leave in Bank Absence type which is valid for 2014 is missing in IT 2006 instead This absence quota valid upto 31.12.9999 is present.
Current requirement is to remove the quota which is valid upto 31.12.9999 and replace the quota which is valid upto 31.12.2014.
I have checked for some PERNRs with same EG/ESG/PA/PSA combination. They have the absence quota valid upto 31.12.2014 Only.

Similar Messages

Absences not deducted from Absence Quota for One Employee

Dear Friends,
I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
But for Sick Leave absence type, it is updating in his absence quota records...
I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
I couldn't understand what will be the reason? Can anyone shed light on this issue?
Thanks in advance,
Sai Narayana,
SAP Functional Consultant.

Hi JS,
I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
I found -
1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
Thanks,
Sai

Error while creating absence Quotas - Error no 83

Hi Friends,
Would appreciate help on this .
While creating time quota-
am geting this error :
<b>Error while creating absence Quotas.
Error no - 83</b>
Reagards,
Srikanta

Hi
Don't know if your question has been resolved, but check the leave cycle date types on IT0041 and IT0001 and IT0007 should all be aligned.
Hope this helps.

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

Getting junk character while creating PDF image for Hebrew language

Hi,
I have a issue while creating PDF image for invoice in Hebrew language . I can able to create a PDF image but it' showing junk characters instead of Hebrew characters.
Please provide your inputs to resolve this issue.
Thanks,
Joy.

Hi ,
I am also facing similar problem.My system is unicode enabled and i am using the device type I8SWIN and courier font .
But still i am getting junk characters for Hebrew characters in PDF.
Can any one suggest me what is the exact device type we have to use for unicode enabled system and also for non unicode enalbled system.
Is any related to truetype font here .Kindly let me know .
Thanks for your valuable inputs .
PRadeep....

Issue while Creating the records in OAF by disabling one field.

Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.

or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna

Is It Possible To Create Different Personnel Number For One Employee

HI Experts,
My Client need to get Different Personnel number for one employee,i.e for Trainee one Personnel number need to generate and same person when moving from Trainee to Probation another new personnel number should generate and again when same person move from Probation to Permanent another new personnel number should generate.
1. How to generate 3 different Personnel number for One employee?
2. How these 3 Personnel number should get linked, if want to get report for this one employee?
Kindly help me.
Thanks,
Lavanya
Message was edited by: Sikindar A

Hi Lavanya,
Your requirement can be fulfilled but not recommended...
As you want to generate different position number at different stage of employment....
i.e Trainee to Probation to Permanent...
First go for Trainee Position Hiring .... and generate first Number Say 5000000
Then suppose employee complete training after 1 Yrs.. then again go PA 40 enter date as 01.01.2015 say... & execute... & give Ref. Personnel Number (5000000) & different position number... this time...
This will link up all the personnel date from previous hiring record... & as per your need you can modify it.... Finally one more number be generated....
Similarly,, you can do for Permanent employee...
Once training or Probation period gets completed you can lock/ separate that employee number
Report ...
You can get necessary details in IT0031...& with different Position numbers which you will using at different stage of hiring...
Hope this should sort your issue..
Regards,
Veeram

Issues while creating implementation for BADI "ME_PROCESS_PO_CUST"

Hi Group,
I have issues while creating implementation for BADI "ME_PROCESS_PO_CUST".
I tried to create implementation for the above mentioned BADI but, I was getting an error like this:
"Interface implementation IF_EX_ME_PROCESS_PO_CUST does not exist".
I want to implement this BADI and so, ideas/views at the earliest will be appreciated.
Please let me know how to overcome this error.
Thanks,
Vishnu.

Hi,
Have you activated the class which is implementing the interface? (in transaction SE19 you should see class name)
Best regards,
Wojciech

Error is report generation for one employee

Dear SAP Experts,
Please provide immediate solution to this issue.
Blood Group details of one Employee is reflecting multiple times while generating report but only one record is maintained in master data.
What could be the possible reason for this error ?
please give some solution ASAP
Regards,
TD

Please, stop using words "immediate" and "ASAP" that is just rude behaviour.
You did not provide the information - which report are you running? What do you mean by 1 record in master data? Does that mean there is only one record in PA0028? If you look technically at the structure of the infotype, you will see that there can be multiply (in fact exactly 30) values / combinations maintained for one single record in the infotype.

Error while creating a quote/quick quote

Dear Experts
While creating a quote/quick quote, the system is showing an error, and save also fails. The error is: "Your current credentials do not grant access to this product"
Kindly help to reolve this.
I am using the system to configure certain demo scenarios.
Regards
Malay

Thanks Ankur Godre , Pragya Pande, Surjeet Bhati
Thanks a lot for your suggestions. I suppose the problem has to do with the Industry solutions incorporated in scoping.
I selected Insurance, and excluded retail (the initial selection).
Now I have reverted the changes, and everything is working fine.
Though I will keep on working to resolve this issue and once successful, will share at this forum.
Thank you everyone.
Regards
Malay Dwivedi

Error while creating datasource userdsn for oracle 10g Errorcode (998)

while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Error msg in create absence quota during hiring.

Hi guys,
when i hire a new employee the create absence quota displays the following error.
"No validity interval for key 2 32 17"
i know that i need to add the new entry in the view Base Entitlement for Absence Quota Generation
(V_T559E)
my problem is that i dont know exactly what the key means
i think that is
2 is for Employee Subgroup Grouping for Time Quota Types
32 i dont have idea
17 the rule for QUOMO
any ideas?

Hi Javier,
Please check tabel V_T559D. Looks like this error was caused by no validity period setting.
2 is for employee subgroup (check table V_503_E)
32 is for personnel subareas (check table V_001P_I)
17 is for vacation quota type
Regards,
Jim

Issue while creating repair order via IW52

Hi All,
I am facing an issue while creating a repair order from Service Notification.
In IW52 for service Notification , we have option of Create repair order in Action box of service notification, when i am clicking that i need to enter the sales order type.. when i am selecting standard order type KD01 or any other it is saying that
1)Order type KD01 does not have the sales doc. identifier "repair"
Message no. QM127
Diagnosis
You entered an order type that is not assigned to the sales document identifier "F" or "G" = repair order.
Procedure
Enter an order type that has the sales document identifier "F" or "G".
Where can we see sales document identifier in config ?
2. I would like know is there any setting where we can give default sales order type to service notification type ..
regards
giri

Dear,
Thanks for your inputs. It will be great help if you can let me know the below :
1) Diff between Repair order, spare parts order..
2)I happened to create a service order from a sales order following IDES Model for CS -4.6C / the service order type created is SM01 is created and my sales order type is OR .. now my question is there any setting where we assign Service order type to sales order type ???
Note :- In OIOL Tcode for SM01 Order type i have IRC Sales order document type linked ..
regards
giri

Income Tax not Calculated for one employee.

Hi experts,
we have updated our patch lvl upto 86. Budget Changes Note is applied already. Now the Problem is with one employee.
Out of 1000 employees for one employee /436, /446 and /450 generated correctly with correct figure. But /460 is not generated.
I can see in the log /451 is generated with the amount exactly as /450.
Why system is not generating /460?
Can anyone guide me?
Regards
Nasim

Well the reaults are surprising as cross financial arrear /616 is only 1385.96 and relief generated by this is 18776. Which is simply not possible. Even in FY 2010-2011 relief should not be generated as relief only comes when employee is end up paying more taxes than last year tax on arrears. Now since tax slabs are increased, relief will not be egenrated.
This issue you can check with OSS message.
IF you want to deactivate the Section 89 relief implementation switch S89SW constant as 0 in table V_T511K. It may also activated on employee level, then you need to check IT0588/ subtype 4. Before deactivating it check out the impact after deactivation in case of retro as i may increase/ decrease the past tax.
Please note that implementation level switch supposed to be activated/ deactivated only once in lifetime of SAP system.

Error occuring while creating a Delivery for Stock transport order

Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                Error Log for coll. run 0001248218
4       6000038321 000010 Only 0 ST of material F784100 available
     4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000020 Only 0 ST of material F784100 available
     4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000030 Only 0 ST of material F784100 available
     4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
Srinivasan

Hi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak.

Issue while creating Absence Quota for one employee

Similar Messages

Maybe you are looking for