Issue while editing Other Bank

All,
We are having trouble with Other Bank (IT9, ST1) on ESS. The Use Case for this is A6. When we are tring to edit the existing Other Bank, it gives a error message saying: "Change in Payroll Past not Possible". Even when we select future dated, and select a records way after the previous payment dat it gives the same error. It almost looks like the system is not delimiting the existing record and creating a new one, instead it is trying to edit the current record in the past, which triggers the standard error message. Would someone please help me with this?
Thanks,
Nakul

are you getting the same error via pa30? Please verify?
also
Additional, if you want to delelmited subtype in ESS, please dont use
"edit" button and you need to use button: "New other bank".
A6: Multiple infotype records of the same type (e.g. other bank)
may exist for an employee at the same time. "New <infotype/subtype>"
button will always be available on the overview screen of the
concerned scenario.  E.g., suitable in Other bank.
Ensure you are using new ITF note 1447867
you can also use badi HRXSS_PER_BEGDA

Similar Messages

  • FCP6 Lag Issue while editing

    I am editing a SD Anamorphic project. The footage was captured on my MacBook Pro 2.33Ghz with FCP6 I copied it to a WD My Book Studio and imported the files into FCP6 on my iMac. I used the proper settings to capture the footage from my XL2.
    But now, as I edit, anytime I play the active sequence I get lag at random points the sequence. I don't have any other sequences open and if this were a high res project I could understand the lag but I recently edited a project using HD video recorded at 100Mbps per second and had no issues.
    I have reason to believe that this issue could be tied to the firewire because when I first began to capture this project I was having time code drops on the iMac but tried in on my MacBookPro and no issues. I am lost at this point. I have 2 weeks of editing left with the project and I editing to fix this lag before it continues to make the edit session unbearable.
    Any ideas?
    Message was edited by: cigxmeda

    I doubt this is the problem, but WD external drives have been on the naughty list for video use for a while now due to their unmodifiable spin down behavior:
    All WD external hard drives will spin down (enter into power saver mode) after 10 minutes of drive inactivity. Once the drive is accessed again, the drive will exit from the power saver mode and spin back up.
    Please Note: This is a permanent feature of most of our external hard drives and cannot be disabled. WD externals that include the WD SmartWare software can use the software to change and/or disable this feature.
    http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1376
    From what I can tell, My Book Studio drives do include the SmartWare utility so you can shut off the spindown feature.

  • Major issues while editing in FCP7

    Hi Folks,
    I recently got a new Macbook Pro and the only reason for that was to use Final cut pro.
    now that i have the software and have started editing i have realized that fcp is sosooo slow I mean when i import my video for some basic editing also nothing complex it hangs and takes a long time.
    The user experience is just not what i expected honestly, earlier i was using corel video studio on the PC even though it wasn't as slick as FCP it so fast as compared to what i am facing in fcp.
    Can anyone help me out by giving any tips... is there a setting i am missing.
    I am using video which i can from my cannon hf 200.. they output in .mts format and i use a video coverter called Xilisoft to make them in HD Mov video and then import them in FCP.
    Even scrubbing the time line hangs and i get a circular read symbol..... and a basic chroma key video takes 3 hours to render!!
    My Macbook has 2.53 Ghz and 4 gb ram with 250 hard drive space.
    Any help is appreciated coz as of now i am moving along in snail's pace...

    #34 - Using your internal system drive as your Capture Scratch.
    Shane's Stock Answer #34 - Internal system drive cannot be used as media drive.
    It is not recommended that you use your internal system drive to capture video to.
    Your internal drive contains the Mac operating system, and it is very busy constantly loading or referencing system resources. This causes you to drop frames while capturing or playing video files.
    For best results, you need either a secondary internal drive (if using a Mac tower), or external drive, like a firewire or eSATA drive. Never USB*.
    (*See Shane's Stock Answer #43)
    Now...CODECS. Click once on the QT files and then GET INFO...what does it say for codec there?
    AVCHD...FCP deals with that format without third party converters. Just open LOG AND TRANSFER in the FCP FILE menu, then click on the FOLDER icon and navigate to the card, or offloaded card and it should bring in the clips. FCP defaults to importing them as ProRes 422, which will make files with large data rates... and you'll need FW800 drives at least to deal with them. If you have FCP 7, you can choose other ProRes formats that have smaller data rates (ProRes LT, ProRes Proxy).
    Shane

  • Performance issues while editing automation?

    Hello,
    I'm working on a video mix project in logic 8. The pieces are about 20 minutes long but there are not a huge number of tracks (8). I am about 12 minutes through and getting some serious system slowdown when editing automation. I have buffers maxed, plenty of room on HD. I am occasionally getting 'out of memory' messages. This is the first project I have used logic for and I was thrilled with it until now. What am I missing?
    thanks

    Hi,
    Further to add to this issue ,this deviation is happening for the images which has the size greater than 4KB and those images which move to the lobsegment of the Blob Column.
    Thanks & Regards
    Ramanathan KrishnaMurthy

  • Audio issue while editing

    I don't know if I've changed a setting or what has happened, but when when I edit frame by frame in a sequence, no audio plays, and the audio mixer to the right of the sequence stays static at a level and doesn't recognize when I am advancing to new frames. However, if I press the space bar, and let the sequence start playing in normal speed, sound comes out perfectly and the audio mixer recognizes the different levels. This is making my editing extremely difficult.
    I am editing 24p native footage if that is relevant.
    Does anyone have any thoughts / ideas?
    Thank you.

    Thanks for the answer!!!
    That is the second time in a few weeks that my settings have changed, and I've been like a deer in headlights on something that is overly simple to solve. I feel like an idiot...

  • Freeze issues while editing in elements 12

    I am working on a template and every time I try to open a new file in to the editor I am freezing when the window pops up to select the file.  This just started happening after the most recent update.  Any help would be appreciated.

    Go to the editor preferences>general and click this button, then relaunch the editor:

  • PA30 and ESS behave differently when updating other bank details

    I am trouble shooting an issue with maintaining other bank details in ESS. In PA30 when a other bank details record is updated SAP code just updates the record with new data. it will change the date changed to sy-datum with no changes to the begda and endda,
    In the case of ESS a new enrty is created in created in the PA0009 so now we have 2 active banks. please help

    Hi,
    You need to implement BADI "HRXSS_PER_BEGDA"
    Please find the following SPRO path
    Personnel Management-> Employee Self-Service -> Service-Specific Settings -> Own Data -> Change Default Start Date
    Change Default Start Date
    Use
    In this IMG activity, you can specify a certain date as the default value for the start date of data records in the Own Data area. You can specify the following dates:
    A date that will be displayed as the start date on the overview page
    A date from which the user can maintain his or her personal data
    You can thus specify whether a user can change only present and future dates or if he/she can also change data records whose validity periods are in the past.
    For example, if a customer wants to allow their employees to maintain their family dependents information as of the previous year, the customer can implement this BAdI specifying the date from which employees can maintain their family data.
    Requirements
    The current system date is currently set as the default value. You can overwrite this setting with a date of your choice.
    Activities
    To change the default start date, you can use the Business Add-In (BAdI) HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
    Parameters of the method DEFAULT_DATE:
    MOLGA (Importing)
    PERNR (Importing)
    INFTY (Importing)
    SUBTY (Importing, optional)
    BEGDA (Changing)

  • An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

    Hi,
    I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
    Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway,  I would greatly appreciate some help on this matter.
    [1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
    Thanks and Regards,
    Prabath Abeysekara
    Edited by: 829281 on Jan 18, 2011 7:52 PM

    Hi,
    Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
    Here's how I got rid of it.
    Addressing all the facts one by one,
    1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
    by removing all the configuration files that were previously created while installing
    the product. The following command can be used to accomplish that task.
    *$ dpkg --purge oracle-xe*
    2.Next, Initially the password I used during the configuration process was "admin".
    Although I tried a couple of times installing the product providing the aforementioned
    password, the web UI kept prompting "Invalid Credentials" message not allowing me
    to login. But, this particular issue could be avoided by giving some other simple
    password.
    Finally, got it working and once again thanks a bunch for taking the burden of
    replying this thread.
    Cheers,
    Prabath

  • MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

  • Issue while Upgrading to SQL 2014 from 2012. " The specified Edition upgrade is not supported."

    Hello Team
    I am seeing this issue while I am trying to do an in-place upgrade from SQL Server 2012 to SQL 2014. Both being Enterprise Editions I am still seeing the below error message in the Feature Upgrade checks.
    " The specified Edition upgrade is not supported"
    Please let me know if anyone else has faced this issue and any workarounds? I am not doing "Edition Upgrade", just wanted to upgrade same edition of 2012 to 2014.
    SQL Server details that is being upgrade: 
    Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) 
    May 22 2013 17:10:44 
    Copyright (c) Microsoft Corporation
    Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    thanks

    Hi Shanky_621
    Thanks for the reply. Yes I was told that it is SQL 2014 Enterprise Edition. Is there a way to verify that? Also yes I did not select the free Evaluation or Express Editions.
    Just run the setup you got for SQL server 2014 and you would reach to page where it would say enterprise or standard after that cancel the setup . Actually version number can be found from Mediainfo located in same folder where setup.exe is located but edition
    cannot be found by that way.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • How to unlock the data from other user while editing

    Hi friends,
    I have created 4 maintenance views for a table. While editing data by using one view, I must be able to edit other data of the same table using other different view. But it is showing "The data is locked by user pagidala and can be displayed only. do u want to display locked data?". I must not get this error, it must permit me to edit the data. How it will be possible?
    Thanks,
    Ramesh.

    Hi,
    I think Its not possible because If there is such type of option there will not be data security.
    i.e. while your maintaing the data in table others can change it simultaneously and it can lead to errors
    If you wish Go to SM12 and remove the lock manually
    Regards
    Prasanth

  • One of my fans is very loud, while the other one is fine, is this an issue?

    One of my fans is very loud, while the other one isn't, is this an issue?

    Hello there, Snake97.
    The following Knowledge Base article provides a great step for fans running at full speed:
    iMac: Fans run at full speed after computer turns on
    http://support.apple.com/kb/ts1433
    In order to correct the issue, reset the SMC. Your iMac should now start up and operate as expected.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Bank Detail (Other Bank issue)

    Hi Experts,
    I have maintained infotype 9 (bank detail) for same time in main bank and other bank. but payroll data pick other bank detail (when both maintain). I want to pick main bank data. In case of cash payment, only I knowlegde purpose detail maintain in other bank.
    So How can I remove this problem. Any configuration setting or any other???
    Thanks & Regards
    Neelesh Sonkar

    Hello Neelesh,
    There are differences between subtype 0 and 1 (main and addtl').
    Main bank: only one entry allowed  per day, the system reads with payroll enddate (general rule).
    If you run payroll after the enddate of the payroll period the system reads with the rundate of the payroll. The reason for this is that if an employee changes her/his bank account at the 1st of the month, we expect that the payment at the 3rd should go to this account also if the period for which it is paid is before the 1st.
    Additional bank: There can be many entries for a payroll period, so we don't  read with a date but take all records which are valid at least 1 day in the payroll period. If an employee ends the addtl. bank account in the middle of the payroll period, this record is used for this payroll period, but not for the next.
    If you want to user only the Subtype 0 for main bank, there a note that may help you.
    454352: Function P0009: Modification for use of payment date
    Also, please read the note 396399.
    I hope this information helps!
    Cheers an Regards,
    Jaime

  • Other Bank Issue

    Hi,
    In infotype 0009, I am maintaining main bank and other bank. If the EE earnings are more than 1000$, then 1000$ should get direct deposited into other bank, and remaining amount should be given out as a check or should be deposited into main bank.
    Now, my requirement is, if an EE earnings are less than 1000$, his amount should not get deposited into other bank....rather it should get deposited into main bank or should be given out as a check.
    How should I modify my schema to achieve this functionality?
    Or should I get this done by ABAP code itself?
    Thanks,
    Haritha

    Hi,
    You may want to customize the rule X050. The F1 says:                                                                           Banking details for infotype 0009 are processed in personnel calculation rule x050. A distinction is made between the main banking details (banking details type 0) and additional banking details (type unequal to 0). If there are additional banking details the payment amount is modified according to the standard value in infotype 0009. No modification is necessary if the main bank details are used. The payment amounts are placed in the Outstanding Payment (/558) and Bank Transfer (/559) wage types.
    You can create an employee sub-group for those earning below $1000 and include it in the sub-schema.
    Hope this helps,
    Reward points if helpful,
    Thank You,

  • Issue in update of BANK INFORMATION in PERSONAL DATA INFORMATION(ESS)

    Hi Experts,
    i have an issue while i am trying to update the BANK INFORMATION in PERSONAL INFORMATION, i am getting the fallowing error:
    Data record 0000001300090      2010033120090401000 has grouping value "" instead of "40"
    Data record 0000001300090      9999123120100401000 has grouping value "" instead of "40"
    please help me out

    Dear Siva,
    You can do this using the personalization
    1. The pernr should be assigned to user id you are using having Content Administrator rights.
    2. Preview the iview for Bank Inforamtion and ctrl + right click on the "Edit Button".
    3. Select "Yes" for the Invisible property of button Edit.
    4. Click Apply and Ok.
    The button will not be visible anymore.
    Regards,
    Samir

Maybe you are looking for