Issue while installing FatWire on weblogic server
I was trying to install CS with Weblogic as the Application server.
During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file.
I had given the valid credentials.
Have anyone faced this issue previously, if so please guide me thorugh.
And also, Is it mandatory to use LDAP ?
Thanks,
Rahul Nair
It sounds like the application server was turned off whilst you were running the LDAP configuration tool. The tool needs the application server to be running.
It's not mandatory to have LDAP integration with CS, from what I have seen most existing customers don't use it. There are also some performance benefits to avoiding LDAP integration.
If you do want LDAP integration then you don't need to configure it immediately after install. The LDAP configuration tool can be run separately, e.g. after you are happy the fresh install is working as expected.
Phil
Similar Messages
-
Facing Issue while Installing SOA server for setting up BPM11g working environment
Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan -
An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit
Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PMHi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath -
CSS not starting while installing ASM on Standalone Server
Hi All,
While installing ASM on AIX server, CSS is not coming up. This server is not on cluster. I have given below the output of after executing the root.sh script.
bash-3.00# /orahome/asm/root.sh
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
Can anyone help me? It's bit urgent!!!!
Thank you.
Regards,
Mithra.Hi All,
Thanks for all the help.
I have found the solution.
I had to delete all .oracle folders and then run the root.sh
Thanks once again.
Regards,
Mithra. -
Issues while installing powershell V3.0
Hello Folks,
I am facing issues while installing powershell V3.0 on Windows 7 ultimate x64 machine.
It is throwing error as "The update is not applicable to your
computer." when I double click Windows6.1-KB2506143-x64 file.
Have checked that it have powershell V2.0 builtin in windows 7 and working as expected.
Have installed .NET framework 4.0 Full, then reinstalled
again rebooted machine.
Have tried with .NET framework 4.5 Full, still issue persists.
tried below workaround suggested on a forum:
start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-
KB2506143-x64.cab through CMD
IT returns error as:
Operation failed with 0x80070003
The system cant find the path specified
I am not able to figure out what exactly is going wrong.
Could someone please jump in to help ?
ThanksHi RajendraP,
Please also make sure Windows 7 Service Pack 1 (SP1) must be installed as a prerequisite on computers running Windows 7. To install SP1, go to
http://windows.microsoft.com/installwindows7sp1
Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0. You can install Microsoft .NET Framework 4.0 at
http://go.microsoft.com/fwlink/?LinkID=212547
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Pacman Download DB issues while installing
Hey,
So I'm new to any type of Linux, but I thought I'd try arch out since many people recommend end it to me.
I'm in the install shell from the livecd and whenever I try to pacman -Sy to get the databases, they download full speed for a second then the DL speed just keeps dropping until the download cancels saying that it was too slow (less than 1b per 10secs). I've seen people post similar problems on here but none of their solutions worked for me.
Any help would be obliged,
-Cynthia
(I'm on my phone typing this BTW)
Last edited by Cynthia (2014-01-16 04:46:34)for clarity :
Are you doing that while booting from the livecd, or booting from the minimal base system installed on your harddrive ?
If from the hdd : Which guide did you follow for installing and were there network problems during the install ?
Edit :
just realised your topic title says issues while installing.
Are you following https://wiki.archlinux.org/index.php/Beginners%27_Guide or another guide ?
Last edited by Lone_Wolf (2014-01-16 10:42:16) -
A serious problem occurred while installing the iPlanet Messaging Server Init Config
Hi I have this error while working with iMS5.x and iAS6.5. As long as iMS is the only product installed, nothing is the problem. If I try installing iMS after iAS installed, it points an error. I dont know whats the reason. The following is the message that I got:
<b>
A serious problem occurred while installing the iPlanet Messaging Server Init Co
nfig. It reported the following problem:
The application command "jre -cp "/train/iplanet/server5/bin/msg/imta/classes/im
taconfig.jar" com.iplanet.msg.imta.config.InitConfig -d iplanet1.com -r iplanet1
.com -h shivaram.sun.com -c /train/iplanet/server5/msg-shivaram-2/imta/config" c
ould not be run.
Press any key to continue.
ON PRESSING ANY KEY, I GET...
Due to a serious problem the iPlanet Messaging Server installer is unable to con
tinue. Please examine the log file "/train/iplanet/server5/setup/msg/iplanet-ms
g-install.log" for more information.
Press any key to continue.
</b>
The content of "/train/iplanet/server5/setup/msg/iplanet-msg-install.log" file is:
<b>
Installer log started.
GMT: 20020426225748Z
NOTICE: Creating Common Product Configuration.
NOTICE: Running Directory Setup.
MESSAGE: running command
/train/iplanet/server5/install/perl /train/iplanet/server5/bin/msg/install/bin/ims_dssetup.pl -i yes -c /train/iplanet/server5 -d slapd-shivaram -r "o=internet" -u "o=isp" -s yes -S /train/iplanet/server5/bin/msg/install/bin/config
cmdpath: none
runpath: none
NOTICE: Creating Messaging Product Information in LDAP.
NOTICE: Creating Messaging users/groups information in LDAP.
NOTICE: Creating Messaging file links.
NOTICE: Running PostInstall Product After Hook.
MESSAGE: running command
perl prod-post-aft-hook.pl /train/iplanet/server5
cmdpath: /train/iplanet/server5/install
runpath: /train/iplanet/server5/bin/msg/install/bin
NOTICE: Creating Instance Name.
NOTICE: Creating Messaging Common Instance Files.
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/configutil /train/iplanet/server5/msg-shivaram-2/configutil
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/counterutil /train/iplanet/server5/msg-shivaram-2/counterutil
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/expire /train/iplanet/server5/msg-shivaram-2/expire
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/getconf /train/iplanet/server5/msg-shivaram-2/getconf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/refresh /train/iplanet/server5/msg-shivaram-2/refresh
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/setconf /train/iplanet/server5/msg-shivaram-2/setconf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/start-msg /train/iplanet/server5/msg-shivaram-2/start-msg
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/stop-msg /train/iplanet/server5/msg-shivaram-2/stop-msg
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/start-ens /train/iplanet/server5/msg-shivaram-2/start-ens
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/stop-ens /train/iplanet/server5/msg-shivaram-2/stop-ens
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/README.txt /train/iplanet/server5/msg-shivaram-2/README.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imsimta /train/iplanet/server5/msg-shivaram-2/imsimta
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/ChannelDefaults.opt /train/iplanet/server5/msg-shivaram-2/imta/config/ChannelDefaults.opt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/big5.txt /train/iplanet/server5/msg-shivaram-2/imta/config/big5.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/cns11643.txt /train/iplanet/server5/msg-shivaram-2/imta/config/cns11643.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/gb2312.txt /train/iplanet/server5/msg-shivaram-2/imta/config/gb2312.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/jis0208.txt /train/iplanet/server5/msg-shivaram-2/imta/config/jis0208.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/jis0212.txt /train/iplanet/server5/msg-shivaram-2/imta/config/jis0212.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/ksx1001.txt /train/iplanet/server5/msg-shivaram-2/imta/config/ksx1001.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charnames.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charnames.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charsets.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charsets.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charsets_ps.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charsets_ps.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charsubs.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charsubs.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/countries.txt /train/iplanet/server5/msg-shivaram-2/imta/config/countries.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dirsync.opt /train/iplanet/server5/msg-shivaram-2/imta/config/dirsync.opt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dispatcher.cnf /train/iplanet/server5/msg-shivaram-2/imta/config/dispatcher.cnf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dl_auth.map /train/iplanet/server5/msg-shivaram-2/imta/config/dl_auth.map
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dns_canonical.rules /train/iplanet/server5/msg-shivaram-2/imta/config/dns_canonical.rules
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/imta_tailor /train/iplanet/server5/msg-shivaram-2/imta/config/imta_tailor
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/internet.rules /train/iplanet/server5/msg-shivaram-2/imta/config/internet.rules
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/job_controller.cnf /train/iplanet/server5/msg-shivaram-2/imta/config/job_controller.cnf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/languages.txt /train/iplanet/server5/msg-shivaram-2/imta/config/languages.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/magic.dat /train/iplanet/server5/msg-shivaram-2/imta/config/magic.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/maximum.dat /train/iplanet/server5/msg-shivaram-2/imta/config/maximum.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/maximum_charset.dat /train/iplanet/server5/msg-shivaram-2/imta/config/maximum_charset.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/maximum_command.dat /train/iplanet/server5/msg-shivaram-2/imta/config/maximum_command.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/name_content.dat /train/iplanet/server5/msg-shivaram-2/imta/config/name_content.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/option_charset.dat /train/iplanet/server5/msg-shivaram-2/imta/config/option_charset.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_bounced.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_bounced.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_deferred.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_deferred.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_delayed.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_delayed.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_delivered.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_delivered.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_failed.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_failed.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_forwarded.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_forwarded.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_header.opt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_header.opt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_prefix.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_prefix.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_suffix.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_suffix.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_timedout.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_timedout.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/bin/sendmail /train/iplanet/server5/msg-shivaram-2/imta/bin/sendmail
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/bin/cshrc /train/iplanet/server5/msg-shivaram-2/imta/bin/cshrc
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/bin/kshrc /train/iplanet/server5/msg-shivaram-2/imta/bin/kshrc
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/attach_fs.html /train/iplanet/server5/msg-shivaram-2/html/attach_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/collect_fs.html /train/iplanet/server5/msg-shivaram-2/html/collect_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/comp_fs.html /train/iplanet/server5/msg-shivaram-2/html/comp_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fldr_fs.html /train/iplanet/server5/msg-shivaram-2/html/fldr_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/frame.html /train/iplanet/server5/msg-shivaram-2/html/frame.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ldap_fs.html /train/iplanet/server5/msg-shivaram-2/html/ldap_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/mbox_fs.html /train/iplanet/server5/msg-shivaram-2/html/mbox_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/msg_fs.html /train/iplanet/server5/msg-shivaram-2/html/msg_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/opts_fs.html /train/iplanet/server5/msg-shivaram-2/html/opts_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/receipt_fs.html /train/iplanet/server5/msg-shivaram-2/html/receipt_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/compRecipient.js /train/iplanet/server5/msg-shivaram-2/html/compRecipient.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/editPabEntry.js /train/iplanet/server5/msg-shivaram-2/html/editPabEntry.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/form.js /train/iplanet/server5/msg-shivaram-2/html/form.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/editPabGroup.js /train/iplanet/server5/msg-shivaram-2/html/editPabGroup.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/lookup.js /train/iplanet/server5/msg-shivaram-2/html/lookup.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/main.js /train/iplanet/server5/msg-shivaram-2/html/main.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/pab.js /train/iplanet/server5/msg-shivaram-2/html/pab.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/util.js /train/iplanet/server5/msg-shivaram-2/html/util.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/default.html /train/iplanet/server5/msg-shivaram-2/html/en/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/mail.html /train/iplanet/server5/msg-shivaram-2/html/en/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/help2.htm /train/iplanet/server5/msg-shivaram-2/html/en/help2.htm
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/ix.htm /train/iplanet/server5/msg-shivaram-2/html/en/ix.htm
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/topics.htm /train/iplanet/server5/msg-shivaram-2/html/en/topics.htm
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/i18n.js /train/iplanet/server5/msg-shivaram-2/html/en/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/iplanet.jpg /train/iplanet/server5/msg-shivaram-2/html/en/iplanet.jpg
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/default.html /train/iplanet/server5/msg-shivaram-2/html/ja/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/mail.html /train/iplanet/server5/msg-shivaram-2/html/ja/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/i18n.js /train/iplanet/server5/msg-shivaram-2/html/ja/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/default.html /train/iplanet/server5/msg-shivaram-2/html/ko/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/mail.html /train/iplanet/server5/msg-shivaram-2/html/ko/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/i18n.js /train/iplanet/server5/msg-shivaram-2/html/ko/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/default.html /train/iplanet/server5/msg-shivaram-2/html/de/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/mail.html /train/iplanet/server5/msg-shivaram-2/html/de/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/i18n.js /train/iplanet/server5/msg-shivaram-2/html/de/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/default.html /train/iplanet/server5/msg-shivaram-2/html/fr/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/mail.html /train/iplanet/server5/msg-shivaram-2/html/fr/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/i18n.js /train/iplanet/server5/msg-shivaram-2/html/fr/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/default.html /train/iplanet/server5/msg-shivaram-2/html/es/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/mail.html /train/iplanet/server5/msg-shivaram-2/html/es/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/i18n.js /train/iplanet/server5/msg-shivaram-2/html/es/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/default.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/mail.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/i18n.js /train/iplanet/server5/msg-shivaram-2/html/zh-CN/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/default.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/editPabGroup_fs.html
cmdpath: noneYou are probably installing on a hardened machine.
The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
1- the library name is libX11.so.4 and
2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
You can check the results running <server-root>/bin/base/jre/bin/jre
Hope that helps and sorry about my poor english. -
NullPointerException while installing Fatwire Content server 75.
I am installing Fatwire content server 75. I have set my java_home to JDK 1.6 and then ran csInstall.bat. I am getting following NullPointerException
Please wait while the installation is configured for your system
Exception in thread "main" java.lang.NullPointerException
at COM.FutureTense.Apps.CSSetup.L(y:596)
at COM.FutureTense.Apps.CSSetup.main(y:2933)
I am installing content server locally on my Windows 7 machine. Please let me know if I am missing any settings/configuration or something in install itself.
Thanks.I would try cross-posting this here to see if you get any add'l help:
https://groups.google.com/forum/#!forum/webcentersites
Did you add your ContentServer directory to the PATH as the docs require?
looks like the CS jars aren't in the classpath.
-ryan -
Issues while install Application server
Hi all,
I am trying to install application server for the first time. while installing I am getting the error in the REGISTER with Internet directory screen,
It has two fields to enter
1. HOST : I assume machine name in which the S/w is getting installed
2. PORT : Please tell me the port number which I have to enter here?
Ther version I am trying to intall is,
APPLICATION SERVER 10g (10.1.2.0.2)
One more doubt,
Is Oracle map viewer is available with APPLICATION SERVER 10g (10.1.2.0.2)??
Please help
-Thanks & Cheers
AntonyThe Application Server can be installed one of three ways
1) J2EE and WebCache
2) Portal and Wireless
3) BI and Forms
Option 1) J2EE and WebCache is just that, only the Oracle Container for Java (OC4J) J2EE server and a WebCache/WebServer
Option 2) includes option 1 plus adds Oracle's Portal product with an optional Wireless enviorment (for displaying on things like phones, pda's, etc).
Option 3) includes option 1 & 2 plus adds Discoverer (BI) and Oracle Forms
Options 2 and 3 require an Infrastructure server be installed prior to the Application Server install. This is the Oracle Internet Directory server (OID). This can be installed on the same machine, but I recommend a seperate host if this is going to be a production box. Same host installs will work fine for learning/classroom.
The OID server is installed from the same install as Application Server. It was one of the options early in the install. All of the documentation ships with the install media (both download & CD/DVD) Look in your install & find the doc directory. Launch the doc.htm in a web browser. The Install Guide goes through all of this in detail. -
Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013
Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.comHi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Issue while installing WCS using omii.ini: Database ping failed
Hi,
I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server".
Following are the things I have been able to do successfully:
Install Oracle DB, create a database and then create a user for this database
Install WebLogic server, create domain, create admin server, managed server, and finally create a datasource. THe datasource connection to the DB created in step 1 above is successfull.
I downloaded the WCS installer from Oracle Website 'WebCenterSites_11.1.1.6_bp1'. I am installing using silent installer using omii.ini file.
During installation, on receiving the prompt to install CS and CAS applications, I installed them successfully via WebLogic console.
I tested the URL 'http://localhost:7001/cs/HelloCS' and it showed me the Oracle WCS 11g page.
Now, when I go back to the wcs installation terminal and hit Enter, it gives following error:
[2013-07-11 01:32:21.861][CS.INSTALL][INFO] 1. If your platform requires you to manually deploy the Sites application, deploy Sites now. Otherwise, continue with step 2 2. Restart your application server. 3. Test the URL http:////HelloCS to see if application is deployed successfully 4. If the test is successful, press ENTER. URL http://localhost:7001/cs/HelloCS [2013-07-11 01:41:16.841][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://localhost:7001/cs/HelloCS [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Web Server and Application Server Configuration test finished successfully. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Attempting to Ping the Database. [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Database Ping was attempted with WCSDataSource as the DSN. The URL that was passed in = http://localhost:7001/cs/CatalogManager. Please Check your connection and property files settings. [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Install was unable to ping the database. Installation has halted. [2013-07-11 01:41:17.461][CS.INSTALL][ERROR] Worker.run. Install failed. Please check log file. Click Yes to modify your install choices and re-try install. Click No to terminate application.
It looks like DB ping is getting failed.
But I am not sure how to resolve this error.
Please help. I am pasting the content of my bea_omii.ini file that I have used. (Please view as HTML, as formatting is getting lost on this page.)
Do let me know if any other information is required from my end.
bea_omii.ini:
#ContentServer install properties #Thu Apr 17 12:03:27 IST 2008 # Content Server Information # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall CSInstallDirectory=/home/oracle/WCS # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared CSInstallSharedDirectory=/home/oracle/WCS/Shared # For delivery installation set Development to false Development=true # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster #CSInstallType=single # This is to select APPSERVER Note: PORTALSERVER is not supported CSInstallPlatformType=APPSERVER # Set the application/portal server you want to install # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat) CSInstallAppServerType=wls92 # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3 # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3 CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3 # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain CSInstallAdminDomainName=WCSDomain # Option for manual deployment (Should always be set to true) CSInstallbManual=true #Manual deployment needs to set the path where installer has to explode the war CSManualDeployPath=/home/oracle/WCS/deployment # Set the context path for your web application for example /cs/ sCgiPath=/cs/ # Set the database type Possible options #CSInstallDatabaseType= [SQL Server, DB2, Oracle10] CSInstallDatabaseType=Oracle10 # Set the data source name CSInstallDBDSN=WCSDataSource # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster. CSInstallType=single #WEM installation IsWEMInstall=TRUE #hostname where cs is installed CASHostName=localhost # port number of cs installation CASPortNumber=7003 #Server HostName of internally accessible CAS CASHostNameLocal=localhost #Server PortNumber of internally accessible CAS CASPortNumberLocal=7003 #Server HostName where CAS is actually deployed CASHostNameActual=localhost # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger LoggerName=org.apache.commons.logging.impl.Log4JLogger # Set the host name where the application will be running CSInstallWebServerAddress=localhost # Set the port number where the application will be running CSInstallWebServerPort=7001 # Set this property to true if you are installing Spark CSInstallSpark=false # Sample Sites Information # Set this true if you want to install Avisports sample site. Avisports=true # CS-Direct and CS-Direct Advantage properties. Please don't touch them ContentCentre=true CatalogCentre=true # Set this true if you want to install CS Engage otherwise false MarketingStudio=true # Set this to true if you want to install Commerce Connectors CommerceConnector=true # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode FSCore=true # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore FSEngageCore=true # Set this to true to install Store Schema. This depends on Development and FSCore FSStoreSchema=true # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore FSEngageStoreSchema=true # Set this to true to install Document Schema. This depends on Development and FSCore FSDocSchema=true # Set this to true to install Sample Visitors. This depends on Development and FSCore FSLocalUser=true # Set this to true to install Pretty URL Package. This depends on Development and FSCore FSPrettyURL=true # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema FSStoreDemoData=true # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema FSDocDemoData=true # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema FSEngageStoreDemoData=true # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema FSSiteView=true # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre FSAnalytics=true # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre CCSampleAssets=true # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre CCSampleAssetsBF=true # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre MSSampleAssetsBF=true # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre CCSampleAssetsHW=true # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre CatCSampleAssets=true # Set this to true to install Hello World sample site. This depends on Development and ContentCentre CCSampleSiteHW=true # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF CCSampleSiteBF=true # Set this to true to install Burlington Financial Extensions sample site. MSSampleSiteBF=true # Set this to true to install GE Lighting sample site. MSSampleSiteGE=true # Spark sample site components # Set this to true to install Document Management sample asset types DMSampleAssets=false # Set this to true to install Content Management sample asset types WCMSampleAssets=false # Set this to true to install Base Components SparkSampleSite=false # Set this to true to install Sample Data SparkSampleData=false # Set this to true to install Sample Portlets. Set this true if this is a portal server SparkSamplePortlets=falseThanks for your reply Yct.
I got the ping issue resolved today, there was an issue in the data source. Finally I was able to complete the installation successfully.
But there is one more issue now. After completing the installation, I am trying to access the URL to get to the WCS login page, but with no success.
Below, I am mentioning few URLs that I tried, and the outcome:
http://localhost:7001/cs/HelloCS , This URL gives me a page with some static content messages like 'Welcome to Oracle WebCenter Sites 11gR1'. Then there are some text lines in blue color. I think this page is working as expected.
http://localhost:7001/cs/login , this URL automatically gets redirected to the URL 'http://localhost:7003/cas/login?service=http%3A%2F%2Flocalhost%3A7001%2Fcs%2Fwem%2Ffatwire%2Fwem%2FWelcome' and I get an error message 'Firefox can't establish a connection to the server at localhost:7003.'
http://localhost:7001/cas/login, this takes me to login page, where when I enter fwadmin@xceladmin credentials, I am taken to JASIG Central Authentication Service page, which is again static, and I can't do anything on this page
http://localhost:7001/cs/Satellite?c=Page&cid=1327351719456&pagename=avisports%2FPage%2FHomeLayout1 , this takes me to the Avisports site, which is functional
http://localhost:7001/cs/Satellite?c=Page&childpagename=FirstSiteII%2FFSIILayout&cid=1124747609916&pagename=FSIIWrapper, this takes me to he FirstSit page, which is again functional
Issue: I am not getting the main login page, where I would get 3 sites(Avisports/FirstsiteII) in the dropdown.
Looks like there is something wrong going on.
Following I am pasting my omii.ini file, if it helps:
#ContentServer install properties
#Thu Apr 17 12:03:27 IST 2008
# Content Server Information
# Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall
CSInstallDirectory=/home/oracle/WCS
# Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared
CSInstallSharedDirectory=/home/oracle/WCS/Shared
# For delivery installation set Development to false
Development=true
# CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster
#CSInstallType=single
# This is to select APPSERVER Note: PORTALSERVER is not supported
CSInstallPlatformType=APPSERVER
# Set the application/portal server you want to install
# Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat)
CSInstallAppServerType=wls92
# Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3
# on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3
CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3
# [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain
# on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain
CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain
# [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain
CSInstallAdminDomainName=WCSDomain
# Option for manual deployment (Should always be set to true)
CSInstallbManual=true
#Manual deployment needs to set the path where installer has to explode the war
CSManualDeployPath=/home/oracle/WCS/deployment
# Set the context path for your web application for example /cs/
sCgiPath=/cs/
# Set the database type Possible options
#CSInstallDatabaseType= [SQL Server, DB2, Oracle10]
CSInstallDatabaseType=Oracle10
# Set the data source name
CSInstallDBDSN=WCSDataSource
# By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster.
CSInstallType=single
#WEM installation
IsWEMInstall=TRUE
#hostname where cs is installed
CASHostName=localhost
# port number of cs installation
CASPortNumber=7003
#Server HostName of internally accessible CAS
CASHostNameLocal=localhost
#Server PortNumber of internally accessible CAS
CASPortNumberLocal=7003
#Server HostName where CAS is actually deployed
CASHostNameActual=localhost
# Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog
# com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger
LoggerName=org.apache.commons.logging.impl.Log4JLogger
# Set the host name where the application will be running
CSInstallWebServerAddress=localhost
# Set the port number where the application will be running
CSInstallWebServerPort=7001
# Set this property to true if you are installing Spark
CSInstallSpark=false
# Sample Sites Information
# Set this true if you want to install Avisports sample site.
Avisports=true
# CS-Direct and CS-Direct Advantage properties. Please don't touch them
ContentCentre=true
CatalogCentre=true
# Set this true if you want to install CS Engage otherwise false
MarketingStudio=true
# Set this to true if you want to install Commerce Connectors
CommerceConnector=true
# Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode
FSCore=true
# Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore
FSEngageCore=true
# Set this to true to install Store Schema. This depends on Development and FSCore
FSStoreSchema=true
# Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore
FSEngageStoreSchema=true
# Set this to true to install Document Schema. This depends on Development and FSCore
FSDocSchema=true
# Set this to true to install Sample Visitors. This depends on Development and FSCore
FSLocalUser=true
# Set this to true to install Pretty URL Package. This depends on Development and FSCore
FSPrettyURL=true
# Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema
FSStoreDemoData=true
# Set this to true to install Document Demo Data. This depends on Development and FSDocSchema
FSDocDemoData=true
# Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema
FSEngageStoreDemoData=true
# If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema
FSSiteView=true
# Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre
FSAnalytics=true
# Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre
CCSampleAssets=true
# Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre
CCSampleAssetsBF=true
# Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre
MSSampleAssetsBF=true
# Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre
CCSampleAssetsHW=true
# Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre
CatCSampleAssets=true
# Set this to true to install Hello World sample site. This depends on Development and ContentCentre
CCSampleSiteHW=true
# Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF
CCSampleSiteBF=true
# Set this to true to install Burlington Financial Extensions sample site.
MSSampleSiteBF=true
# Set this to true to install GE Lighting sample site.
MSSampleSiteGE=true
# Spark sample site components
# Set this to true to install Document Management sample asset types
DMSampleAssets=false
# Set this to true to install Content Management sample asset types
WCMSampleAssets=false
# Set this to true to install Base Components
SparkSampleSite=false
# Set this to true to install Sample Data
SparkSampleData=false
# Set this to true to install Sample Portlets. Set this true if this is a portal server
SparkSamplePortlets=false -
Getting error while deploying application in weblogic server 9.2
Im getting below error in production in weblogic 9.2 server.
####<Jan 27, 2010 8:17:02 PM AST> <Error> <Deployer> <hpw2k3los01> <LOSWebServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1264612622151> <BEA-149205> <Failed to initialize the application 'NCB_LOS' due to error weblogic.management.DeploymentException: Exception occured while downloading files.
weblogic.management.DeploymentException: Exception occured while downloading files
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:43)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:98)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:663)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:706)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:100)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:38)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:177)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '192.168.50.5', port: '80'
at weblogic.net.http.HttpClient.openServer(HttpClient.java:320)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:375)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:149)
at weblogic.net.http.HttpClient.New(HttpClient.java:245)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:160)
at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:75)
at weblogic.deploy.service.datatransferhandlers.DataHandlerManager$RemoteDataTransferHandler.getDataAsStream(DataHandlerManager.java:153)
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:39)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:98)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:663)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:706)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:100)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:38)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:177)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
This error is intermittent and comes during deployment.Once we get this error we have restart the server.
Can someone please tell what is the cause of this error?
we dont have any server with Ip '192.168.50.5' as mentioned in the error message.and what exactly is the server trying to download here?
Edited by: user12537931 on Jan 31, 2010 4:09 AMHi,
How are you trying to deploy your application on the Server...Using Admin Console...or Using any Script Like WLDeployer?
The issue seems to be related to Http protocol in port 80.
Are you sure that in your Production environment there is not firewall blocking issue...on port 80...?
Some firewall settings rejects any existing connection to be opened for a long time....If your application takes some time, then please check that the firewall doesn't disconnect the existing connection until the deployment time gets over.
<font color=red>Note: </font>Sometimes this kind of issue happens when we try to deploy our application on WebLogic Server...at that time based on the XSD informations available in our DeploymentDescriptors...the Server tries to download those DTDs from the mentioned URIs....
Example:
web.xml has some entries like:
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
In above case if the Firewall of our production environment Blocks any request to pass through Port 80 (default Http Port) then we get such exceptions.
http://middlewaremagic.com/weblogic/?p=802
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic (Middleware Magic Is Here) -
Error while deploying application on weblogic server
Hi,
I have created webservice and deployed on weblogic server.
Earlier it was working fine. I added some logger and trying to redeploy it.
But it gives following error.
Weblogic Server Exception: java.lang.NoSuchMethodException: deploy(java.lang.String,java.lang.String,java.lang.String,weblogic.management.deploy.DeploymentData,java.lang.String,java.lang.Boolean,) for com.bea:Name=DeployerRuntime,Type=DeployerRuntime
[12:46:48 AM] See server logs or server console for more details.
[12:46:48 AM] java.lang.NoSuchMethodException: deploy(java.lang.String,java.lang.String,java.lang.String,weblogic.management.deploy.DeploymentData,java.lang.String,java.lang.Boolean,) for com.bea:Name=DeployerRuntime,Type=DeployerRuntime
[12:46:49 AM] #### Deployment incomplete. ####
[12:46:49 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Can anybody help me out..
Thanks in advance.Hi,
I am newbie for web service Need your help.
I am having well developed webservice project with apache cxf 2.2.3 and working fine on Weblogic server 10.3
But After migration from 10.3 to 10.3.4 Facing below problem.
While calling call back service of third party it is giving warning messages like
12 Apr, 2011 5:42:36 PM weblogic.wsee.jaxws.framework.policy.advertisementimpl.AdvertisementHelperImpl registerExtension
WARNING: Registering oracle.j2ee.ws.wsdl.extensions.addressing.AddressingExtensionRegistry extension failed; java.lang.NoSuchMethodException: oracle.j2ee.ws.wsdl.extensions.addressing.AddressingExtensionRegistry*.registerSerializersAndTypes()*12 Apr, 2011 5:42:36 PM weblogic.wsee.jaxws.spi.WLSServiceDelegate addWsdlDefinitionFeature
SEVERE: Failed to create WsdlDefinitionFeature for wsdl location: http://serverName:port/WSDLURL, error: com.sun.xml.ws.wsdl.parser.InaccessibleWSDLException, message: 2 counts of InaccessibleWSDLException.
I tried Below solutions
1. I added com.oracle.ws.orawsdl_1.3.0.0.jar file in web service application provided the required clssess to resolve the issue. Now getting below exceptions
But getting Exception related org.apache.cxf.wsdl.WSDLManager as it is referenced from my beans.xml import some xml file from cxf 2.2.3.jar and due to
above jar, the WSDL4J.jar is not getting deployed and throwing getElementType() menthod not found exception while creating bean class for Webservice.
2. Now I just rename this jar file so that I can expose WSDL, But getting below exception after calling call back servic
12 Apr, 2011 5:42:36 PM weblogic.wsee.jaxws.framework.policy.advertisementimpl.AdvertisementHelperImpl registerExtension
WARNING: Registering oracle.j2ee.ws.wsdl.extensions.addressing.AddressingExtensionRegistry extension failed; java.lang.NoSuchMethodException: oracle.j2ee.ws.wsdl.extensions.addressing.AddressingExtensionRegistry.registerSerializersAndTypes*(com.ibm.wsdl.extensions.PopulatedExtensionRegistry)*12 Apr, 2011 5:42:36 PM weblogic.wsee.jaxws.spi.WLSServiceDelegate addWsdlDefinitionFeature
SEVERE: Failed to create WsdlDefinitionFeature for wsdl location: http://serverName:port/WSDLURL, error: com.sun.xml.ws.wsdl.parser.InaccessibleWSDLException, message: 2 counts of InaccessibleWSDLException.
After investingation I found that in cxf 2.2.3.jar there are some classes which are also present in com.oracle.ws.orawsdl_1.3.0.0.jar.
now in this case deployer is able to find out the call but signature is getting mismatch, because com.ibm.wsdl.extensions.PopulatedExtensionRegistry is referred from cxf2.2.3.jar file.
Looking for your response.
Thanks In Advance. -
Facing issue while business service in weblogic Env
Hi All,
I am facing issue while creating a business service in the application. I have deployed my jar file which contain the XAI service under businessApp,Standalone folder of the app as well as i had placed the generated XML file of mine servicer under the xmlMetaInfo Folder of the app. After bouncing the server and when i am creating the business with the schema provided below i am getting an exception :
Schema:
<schema pageAction="read">
<EMAILID mapField="EMAILID"/>
<USER_FLG mapField="USER_FLG"/>
<FIRST_NAME mapField="FIRST_NAME"/>
<LAST_NAME mapField="LAST_NAME"/>
<USER_ID mapField="USER_ID"/>
<PASSWORD mapField="PASSWORD"/>
<USER_GROUP_1 type="group">
<userGroup mapField="USR_GRP_ID1"/>
</USER_GROUP_1>
<USER_GROUP_2 type="group">
<userGroup mapField="USR_GRP_ID2"/>
</USER_GROUP_2>
<USER_GROUP_3 type="group">
<userGroup mapField="USR_GRP_ID3"/>
</USER_GROUP_3>
<USER_GROUP_4 type="group">
<userGroup mapField="USR_GRP_ID4"/>
</USER_GROUP_4>
<USER_GROUP_5 type="group">
<userGroup mapField="USR_GRP_ID5"/>
</USER_GROUP_5>
<USER_GROUP_6 type="group">
<userGroup mapField="USR_GRP_ID6"/>
</USER_GROUP_6>
<USER_GROUP_7 type="group">
<userGroup mapField="USR_GRP_ID7"/>
</USER_GROUP_7>
<USER_GROUP_8 type="group">
<userGroup mapField="USR_GRP_ID8"/>
</USER_GROUP_8>
<USER_GROUP_9 type="group">
<userGroup mapField="USR_GRP_ID9"/>
</USER_GROUP_9>
<USER_GROUP_10 type="group">
<userGroup mapField="USR_GRP_ID10"/>
</USER_GROUP_10>
<USER_GROUP_11 type="group">
<userGroup mapField="USR_GRP_ID11"/>
</USER_GROUP_11>
<USER_GROUP_12 type="group">
<userGroup mapField="USR_GRP_ID12"/>
</USER_GROUP_12>
<MESSAGE_TEXT mapField="MESSAGE_TEXT"/>
</schema>
Exception While creating the business Service :
SYSUSER - 899645-93-1 2013-02-18 17:17:42,679 [[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (service.metainfo.MetaInformationRepository) Service metainfo missing for 'CMUSER5'
com.splwg.shared.common.LoggedException: Service metainfo missing for 'CMUSER5'
at com.splwg.shared.common.LoggedException.raised(LoggedException.java:65)
at com.splwg.base.support.service.metainfo.MetaInformationRepository.privateGetMetaInfoURL(MetaInformationRepository.java:171)
at com.splwg.base.support.service.metainfo.MetaInformationRepository.buildMetaInfo(MetaInformationRepository.java:183)
at com.splwg.base.support.service.metainfo.MetaInformationRepository.privateGetMetaInformation(MetaInformationRepository.java:105)
at com.splwg.base.support.service.metainfo.MetaInformationRepository.getMetaInformation(MetaInformationRepository.java:98)
at com.splwg.base.support.schema.validation.BusinessServiceSchemaValidator.initialize(BusinessServiceSchemaValidator.java:28)
at com.splwg.base.support.schema.validation.SchemaValidator.validate(SchemaValidator.java:102)
at com.splwg.base.domain.common.schema.Schema_CHandler.validateBusinessServiceSchema(Schema_CHandler.java:67)
at com.splwg.base.domain.common.schema.Schema_CHandler.validateSchema(Schema_CHandler.java:55)
at com.splwg.base.domain.common.schema.Schema_CHandler.access$000(Schema_CHandler.java:30)
at com.splwg.base.domain.common.schema.Schema_CHandler$ValidateSchemaDefinitionAsValidXml.validateSave(Schema_CHandler.java:147)
at com.splwg.base.domain.common.schema.Schema_CHandler$ValidateSchemaDefinitionAsValidXml.validateSave(Schema_CHandler.java:124)
at com.splwg.base.api.changehandling.AbstractCustomRule.validateSave(AbstractCustomRule.java:86)
at com.splwg.base.support.changehandlers.ChangeEventHandler.applyRule(ChangeEventHandler.java:300)
at com.splwg.base.support.changehandlers.ChangeEventHandler.access$300(ChangeEventHandler.java:37)
at com.splwg.base.support.changehandlers.ChangeEventHandler$2.run(ChangeEventHandler.java:225)
at com.splwg.base.support.changehandlers.ChangeEventHandler$JumpToChangeHandlerRunner.run(ChangeEventHandler.java:339)
at com.splwg.base.support.interception.SessionInterceptionManager.notifyGenericCallStackJump(SessionInterceptionManager.java:268)
at com.splwg.base.support.context.FrameworkSession.notifyGenericCallStackJump(FrameworkSession.java:1473)
at com.splwg.base.support.changehandlers.ChangeEventHandler.executeValidation(ChangeEventHandler.java:229)
at com.splwg.base.support.changehandlers.SessionChangeManager.fireSaveValidations(SessionChangeManager.java:223)
at com.splwg.base.support.changehandlers.SessionChangeManager.processSave(SessionChangeManager.java:204)
at com.splwg.base.support.context.FrameworkSession.processSave(FrameworkSession.java:1102)
at com.splwg.base.support.interception.SessionInterceptionManager.saveChangesCalled(SessionInterceptionManager.java:233)
at com.splwg.base.support.context.FrameworkSession.saveChanges(FrameworkSession.java:1121)
at com.splwg.base.api.GenericBusinessObject.saveChanges(GenericBusinessObject.java:149)
at com.splwg.base.support.pagemaintenance.EntityPageMaintenance.add(EntityPageMaintenance.java:121)
at com.splwg.base.support.pagemaintenance.AbstractPageMaintenance.addItem(AbstractPageMaintenance.java:169)
at com.splwg.base.support.service.JavaPageAddService.add(JavaPageAddService.java:40)
at com.splwg.base.support.service.PageAddService.privateAdd(PageAddService.java:95)
at com.splwg.base.support.service.PageAddService.privateExecute(PageAddService.java:74)
at com.splwg.base.support.service.PageAddService.execute(PageAddService.java:31)
at com.splwg.base.api.service.ServiceDispatcher.addItemInSession(ServiceDispatcher.java:218)
at com.splwg.base.api.service.ServiceDispatcher$2.execute(ServiceDispatcher.java:119)
at com.splwg.base.api.service.ServiceDispatcher$2.execute(ServiceDispatcher.java:118)
at com.splwg.base.support.context.SessionExecutable.doInNewSession(SessionExecutable.java:39)
at com.splwg.base.api.service.ServiceDispatcher.addItem(ServiceDispatcher.java:123)
at com.splwg.ejb.service.impl.ServiceBean$4.compute(ServiceBean.java:93)
at com.splwg.ejb.service.impl.ServiceBean$4.compute(ServiceBean.java:92)
at com.splwg.ejb.service.impl.AbstractServiceBeanInvocationHelper.computeWithTranslatedExceptions(AbstractServiceBeanInvocationHelper.java:25)
at com.splwg.ejb.service.impl.ServiceBeanInvocationHelper.execute(ServiceBeanInvocationHelper.java:12)
at com.splwg.ejb.service.impl.ServiceBean.add(ServiceBean.java:91)
at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl.add(Unknown Source)
at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl_1035_WLStub.add(Unknown Source)
at com.splwg.serviceclient.RemoteServiceDispatcher$4.executeService(RemoteServiceDispatcher.java:79)
at com.splwg.serviceclient.RemoteServiceDispatcher$4.executeService(RemoteServiceDispatcher.java:78)
at com.splwg.serviceclient.RemotePageServiceDispatcherHelper.doIt(RemotePageServiceDispatcherHelper.java:19)
at com.splwg.serviceclient.RemoteServiceDispatcher.add(RemoteServiceDispatcher.java:76)
at com.splwg.base.web.dataservlet.PageAdd.privateDoPost(PageAdd.java:40)
at com.splwg.base.web.dataservlet.MutatingPageServlet.doPost(MutatingPageServlet.java:26)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.splwg.base.web.services.RequestContextFilter.doFilter(RequestContextFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
SYSUSER - 899645-93-1 2013-02-18 17:17:42,688 [[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (api.service.ServiceExecutionPolicy) Rollback: Add failed
Please help me out with this issue as it is blocking mine development time.
Thanks,By default, WLP stores policy data such as roles/users/groups in both weblogic server embedded ldap and db to support user entitlements.
The WebLogic Server embedded LDAP server for a domain consists of a master LDAP server, maintained in the domain’s Administration Server, and a replicated LDAP server maintained in each Managed Server in the domain. I think in your case, the ldap data of admin server and all managed server are not in sync.
Probably you have checked "Refresh Replica At Startup" - when enabled/checked the embedded LDAP server in a Managed Server will refresh all replicated data at boot time only. That is reason why when you restart the servers, the roles populated from all managed servers.
For more details see the doc at http://docs.oracle.com/cd/E15051_01/wls/docs103/secmanage/ldap.html#wp1102162 -
Issue while installing idm 8.1.1 gateway on 64 bit windows 2008 R2
Hi
We have issue in installing idm 8.1.1 gateway on 64 bit windows 2008 R2
C:\Program Files (x86)\IDM\gateway>gateway -i
An error occured while trying to install the service: Input/output error
Sun notes: if you're running 64-bit Windows 2008, you need the JDKTM Version 6 Update 12 and later.
But this java version should be there in Gateway server(windows 2008) or idm installed server?
We don't have java installed on gateway server. is this causing issue?
please let us know
ThanksI may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it.
Edited by: user12611524 on May 2, 2011 5:11 PM
Maybe you are looking for
-
A series of recent problems with new MacBook Pro
Hi, I bought a new MacBook Pro last May. The spec is: Retina, 13-inch, Late 2013 Processor: 2.4 GHz Intel Core i5 I installed Yosemite in November (I think) and the Mac has been giving problems ever since. I'm not sure whether the problems are rela
-
Hyperlinks within .PDF document won't open in browser.
So what I want to happen is when I click a hyperlink within a .PDF file which is opened via Adobe Reader XI, I want a new tab/browser (the link) to be opened with/in Chrome. Currently when I hover my mouse over a link, it turns into a clicky hand thi
-
Hi, My Cisco RV320 router are not working like I want ... I get two ISP in France, same tech. specs., sames bandwidth, but 2 differents way to connect. The first WAN is connected in PPPoE with a ADSL2+ Modem The second WAN is connected in Static IP w
-
Why did contacts disappear on iphone 5s
I have an iphone 5s. The phone had both a gmail email account and an Exchange email account from a previous employer. Since I am no longer with the other employer I removed the exchange email from my calendar in Settings/Mail, Contacts, Calendars.
-
Problem with paying Photoshop photography program.
So I entered my details, all correct, and now i'm just stuck on the screen saying 'your payment is being processed'. Apparently it's been processing for over a hour... Not sure what to do as I don't want to refresh or close the page. Any help?