Issue while Installing Oracle Data Access Software for Windows

All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
Ramesh

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

Similar Messages

Issue trying to install Oracle Data Access Software for Windows

I am trying to install the Data Access software on one of my many workstations and am having an issue with one of them. When the installer comes up it gives me an error:
Invalid Inventory List and it exits.
What do I have to do to get it to recognize my oracle home?

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?

I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7.
Now, when I deploy my application to the Server, it raises error:
Exception: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleCommand' threw an exception. ---> Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Obviously I need to install ODAC on the server, too. My server is:
- Windows 2003 32 bit R2 (I know, I know!)
- IIS 6
So. I downloaded the same installation from Oracle website (ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio [11.2.0.3.20]) and installed it on the server. But still getting the same error.
PS: When I was installing, I chose Oracle Data Access Component for Oracle Client 11.2.0.3.20 in Oracle Universal Installer. hmmmm. Should I choose "Oracle Server" instead? Screenshot
Edited by: 1000434 on Apr 17, 2013 6:35 AM
Edited by: 1000434 on Apr 17, 2013 6:36 AM

ODP.NET, Unmanaged Driver uses unmanaged dependencies in the Oracle Client. The error you see means you have another Oracle Client installed on the Win2003 machine and ODP.NET is attempting to load the incorrect Oracle Client version, rather than the version you installed ODP.NET with.
What you need to do is direct ODP.NET where to find the correct version of its unamanaged Oracle Client dependencies. This will be generally the bin directory of your Oracle Client home that was installed with ODP.NET.
You can learn more about DllPath here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/InstallODP.htm#sthref94
If you're not familiar with how to set ODP.NET settings in the Registry or .NET config files, you can read how to do that here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm#sthref106

Error while installing Oracle Data miner 10G Release 2

Hello,
I am a student involved in research in Data mining. I am new to Oracle Database and data miner.
I installed Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1). Now I am trying to install ORacle data miner (10.2.0.1). However, at the time of installation ODM gives the following error:
"specified data mining server is not compatible. 10.1.0.4.0."
I have installed Oracle 10.2.0.1 but when I login using SqlPlus I get the following information -
SQL*Plus: Release 10.1.0.4.0 - Production on Sun Jul 23 09:52:41 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
I would be really obliged if someone can help me with this.
Thanks in advance
Pooja

Hi ,
Download and install the product version(10.2.0.1.) of Oracle Data Mining....
Simon

Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
i went through the pre-requisites ok before beginning with the installation.
since RHEL 5.3 doesnt support raw devices i used
http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
udev to configure shared storage. my storage is on openfiler as a iSCSI target.
fdisk -l on both nodes shows the shared drives.
[root@node1 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          13      104391   83 Linux
/dev/sda2              14        2053    16386300   8e Linux LVM
/dev/sda3            2054        2372     2562367+ 82 Linux swap / Solaris
Disk /dev/sdd: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdd1               1       10016    10256368   83 Linux
Disk /dev/sdb: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1       10048    10289136   83 Linux
Disk /dev/sdc: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdc1               1       10048    10289136   83 Linux
Disk /dev/sdf: 10.5 GB, 10569646080 bytes
64 heads, 32 sectors/track, 10080 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdf1               1       10080    10321904   83 Linux
Disk /dev/sde: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sde1               1       10016    10256368   83 Linux
[root@node1 ~]# ls -l /dev/iscsi/arpl*
/dev/iscsi/arpl1:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sde
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
/dev/iscsi/arpl2:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdd
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
/dev/iscsi/arpl3:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdb
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
/dev/iscsi/arpl4:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdc
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
/dev/iscsi/arpl5:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdf
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
[root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
still when i enter the name of the raw device which i have created i get the following error. please help
Image: !http://img91.imageshack.us/img91/7448/oracle.png!

did you check this
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
also before you do what is suggested on the url posted by Mufalani,
it seems that you should do the following:
Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
# ls /etc/udev/rules.d/60-raw.rules
/etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
# touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
# cat /etc/udev/rules.d/61-oracleraw.rules
# Raw bind to Oracle Clusterware devices
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
#!/bin/bash
grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
if [ -z "$minor" ]; then
echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
else
echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
fi
done

Domain issue while installing oracle forms 11g

Hi . Trying to install oracle Forms 11g ,while installing it is getting error while creating domain .. Any clue.

Below are log after performing the suggested steps..
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under D:\Oracle\weblogic64\wlserver_10.3\common\nodemanager
Node Manager starting in the background
java.lang.Exception: The node manager failed to start
    at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
    at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
    at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: The node manager failed to start
    at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
    at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(Confi

Issue while installing oracle Databse 10g express edition

Hi,
when i am trying to install Oracle database 10g express edition, it is hanging again and again on one step.
Step is
"Creating and starting Serivices for ORacle database 10g express edition".
Could any one can help me out in this regard.
Thanks

Your answer might be here:
Creating and starting services for Oracle Database 10g express edition
Is this the first or second installation attempt?
Edited by: Markus Waldorf on Sep 20, 2010 1:59 PM
A better link with a solution:
Oracle XE installation wizard stop at "creating and starting services ..."

Issue while installing oracle in suse linux 11

Hi all,
When i try to execute runinstaller from root its not allowing me to run.
I am trying to install oracle 10g.
./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-03_07-00-51AM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installation if the user is root.
: No such file or directory
Is there some thing we can do to bypass and install with root.Thanks.

Ambarish annapureddy wrote:
>
> Is there some thing we can do to bypass and install with root.Thanks.
No, please install using orasid.
Thanks

Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txt

Duplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette.

Issue with Installing Oracle 10g R2 on a Windows 2008 Domain Controller

I'm assigned a evaluation task for my company. The task invoke to install oracle in my Domain Controller Server.
I got "ORA-12560: TNS:protocol adapter error" when I installed ORACLE 10g R2 for Win2K8 on my Windows 2008 (a Domain Controller Server). It happened in the create predefined database period.
I tried to google and noted that there are some RUMOS say "We cannot deploy ORACLE on a Domain Controller, It's impossible"
Is this true? Please, Please advise!
Thansk,

This is a link to a same issue
Creating instance oracle 10.2.0.4 on Windows 2008 32bit

Oracle Data Access Components and Windows XP Professional x64

To start I'm running Windows XP Professional x64, using IIS 6, and Visual Studio 2005. I have a web service project that uses ODAC 11g, which runs just fine when I run it in debugging mode. However when I publish the project and try to access it through IE, I get an application error saying that Oracle.Web or one of its dependencies could not be loaded. Now I suspect that this might be happening becuase I'm running on a 64-bit machine, but I'm not convinced. The web service worked just fine on a 32 bit windows running IIS 5. If anyone could shed some light on this that would be awesome. Thanks!

hi ,
i have more than one question indeed.
1.i installed personal oracle v 8.1.7 for windows nt/2000 on
windows xp profissional platform and it works great.When i
tryed to install developer 2000 6i a microsoft runtime error
is produced. is thier any solutions for such problem?
2.when i tryed to install personal oracle on another machine with the following specs:
-p4 1.4 ghz intell proccessor
-gigabyte motherboard built-in sound
-128 mb ram
-S3 savage4 32mb vga card
the oracle universal installer never runs.

Cannot install HP Officejet 5610 software for windows 8

Hi there
I am running Windows 8 (64-bit)
I have downloaded the HP software for the Officejet 5610 All in One. When I try to run/install the software, however, it tells me that the file is corrupt.
How do I get around this?
Thanks,

Hi there
I can print - the drivers downloaded automatically when I plugged the printer in - but I need the HP Solution Centre Software - I do a lot of scanning and need it for that.
I have still been unable to install the software. It took over a day to download/save the installation file (AIO_CDB_NonNet_Full_Win_WW_140_408), which is supposed to be 412 MB. Only 358 MB downloaded. When I run it, it says file corrupt. I am running windows 8 on a brand new, top of the range Dell How can I get this software to download? Thanks!

Issue while installing Oracle Revenue Management and Billing for Financial

I'm trying to install RMB and getting the below error. I have installed MicroFocus Server 5.1 with the WrapPack 3 but still getting the Winsock error. Please advise.
- 2012-01-17 16:29:59,278 [main] ERROR (host.sockets.WindowsPipeSocket) Cannot instantiate com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket because of problem loading a library com_splwg_base_support_cobol_host_sockets_WindowsPipeSocket during static initialization.
java.lang.UnsatisfiedLinkError: no com_splwg_base_support_cobol_host_sockets_WindowsPipeSocket in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1738)
     at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     at java.lang.System.loadLibrary(System.java:1028)
     at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.<clinit>(WindowsPipeSocket.java:25)
     at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocketStrategy.clearServerPortResources(WindowsPipeSocketStrategy.java:51)
     at com.splwg.base.support.cobol.host.SocketStrategy.bindServerPort(SocketStrategy.java:144)
     at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterSkel.<init>(OptimizedRemoteExecuterSkel.java:43)
     at com.splwg.base.support.cobol.host.OptimizedInvocationStrategy.startOnParentJvm(OptimizedInvocationStrategy.java:25)
     at com.splwg.base.support.cobol.host.RemoteJVMFactoryImpl.<init>(RemoteJVMFactoryImpl.java:64)
     at com.splwg.base.support.cobol.host.CobolHostStartup.startup(CobolHostStartup.java:41)
     at com.splwg.base.support.context.ApplicationContext.initializeCobolRuntime(ApplicationContext.java:231)
     at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:212)
     at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:115)
     at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:91)
     at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:512)
     at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:181)
     at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3827)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4334)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:516)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
- 2012-01-17 16:29:59,278 [main] FATAL (support.context.ApplicationContext) Error initializing ApplicationContext
- 2012-01-17 16:29:59,278 [main] INFO (web.startup.SPLWebStartup) Shutting Down the JMX Connectors...
- 2012-01-17 16:29:59,294 [main] INFO (web.startup.SPLWebStartup) JMX Connectors shutdown successfully
- 2012-01-17 16:29:59,294 [main] INFO (web.startup.SPLWebStartup) Shutting Down the Application Context...
- 2012-01-17 16:29:59,294 [main] ERROR (web.startup.SPLWebStartup) Exception shutting down SPL Application Context
Edited by: 906696 on Jan 17, 2012 3:13 AM

Hi Jeff,
Appreciate your suggestion. My intention was also to post it in the right forum but i could not find any forum for Oracle Revenue Management and Billing, since its a new product.
Its for such new products that we need help and support. Let me know if you are aware of any such forum. That would be great help indeed.

Error while installing oracle 10g developer suite on windows xp

I am getting following error when i am trying to install the oracle 10g developer suite windows xp with sp3
+*"---------------------------*+
Oracle Universal Installer+
---------------------------+
Error in writing to directory c:\TEMP\OraInstall2010-03-18_12-57-52PM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue."+
Even i have enough space of my C drive plus i m the administrator on my PC. I changed the temp location as well and download the zip files(installation) again but it doesn't work. Kindly provide some solution for this error.

Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) This means you already have ISA configured as proxy server. Disable the proxy from the browser and you should be able to access the application. Or simply add the application URL to the list of the proxy exceptions.

Issue while Installing Oracle Data Access Software for Windows

Similar Messages

Maybe you are looking for