Issue while loading master data from BI7 to BPC

Dear Experts,
I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
What could be the reason to not getting BI infoobject as source in BPC?
Thanks in advance...
regards,
Raju

Dear Gurus,
My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
Thanks and regards,
Raju

Similar Messages

Issue while loading master data from BI to BPC

Dear All,
I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
I haven't restrict any ID's using conversion file as well.
What could be the reason? How can I overcome this and load all member's ID in BPC?
Thanks & Regards,
Ramesh.

Ramesh,
Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
Check if you have the Update mode ..
Hope this helps...

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

While Loading Master data from BW Info Object

Hi,
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
Thanks,
Rishi

Hi Rishi,
While looking at your question -
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
This is not what you are explaining in second post.
Kindly close old threads properly if your queries are resolved , so that it will helps other.
Shrikant

Error while loading master data from R/3

Hi Friends,
            I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
Pls waiting for your replays
Thanx in advance
Balaji K.

Hi Aswin,
           Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
"Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
         How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
Pls clarify this problem
Regards.,
Balaji K.

Problem While loading Master data from R/3

Hi All,
When i am trying to load masters data from R/3 datasources to BW Info objects in Info provider menu data is coming to PSA but going to dta targets. the data is matching with the data in R/ 3 but
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Info IDoc 1 : sent, not arrived ; IDoc ready for dispatch (ALE service)
and error message says ERROR 4 in the update.
Can you please help me in this regard . Its Urgent.

Hi,
Check for pending IDOCS in BD87 or SM58 and execute them.
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Refer this Tcodes for IDOC status.
WE02 Display IDoc
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
WE08 Status File Interface
WE09 Search for IDoc in Database
WE10 Search for IDoc in Archive
WE23 Verification of IDoc processing
IDOC
www.erpgenie.com/sapgenie/docs/ale_whitepaper.doc
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
Thanks,
JituK

Issue while loading of data from DSO to InfoCube

Hi Experts,
Can you tell me what might root casue if data is coming into DSO from R3 its correct and fine as required but while loading it to InfoCube from DSO its showing wrong data like some of Line Items that were closed were shown open in Cube AND also KF values were not right
Also there is no Routine code involved b/w DSO and InfoCube.
Thanks in adv .
NP

Hope you didnt delete some req from DSO without deleting change log . This might cause inconsistency.
If so , delete data from dso by right click delete data and reload .

Error 8 while loading the data from the souce system

Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advance

Hi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju

Duplication of records while loading Master Data.

Hi All,
I am facing problem while loading master data from 0BPARTNER_ATTR. The infopackage is getting failed showing message "44 duplicate record found. 32 recordings used in table 44 duplicate record found. 32 recordings used in table /BI0/XBPARTNER"
we can rectify manually but daily the loading is getting failed showing the same message. So Cvan anybody suggest me how to rectify this problem permanently. And Can you Explain me why the error is?
If i go to PSA and check i can find only one dulplicate record. I am not able to understand the Error Message.
With Regards,
Thilak
Edited by: thilak. neelam on Mar 10, 2009 1:46 PM
Edited by: thilak. neelam on Mar 10, 2009 1:47 PM

Hi,
there was (is?) a recent problem in the SAP BI 7.0 software, so that duplicates were removed during init load, but not during delta load. Although the DTP could not set currently (also an error that has already a SAP note). We added a manual removal using ABAP code to avoid upgrading to a new SAP version. That helped. The duplicates may also result from two full request that are loaded at the same time.
Hope this help to analyse the problem in details.
Regards
Thomas

While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

Issue while loading master data from BI7 to BPC

Similar Messages

Maybe you are looking for