Issue while migrating the Info Source

Hi Experts,
I have transported an Infosource along with Transfer rule and data source from Dev to quality. The Source system is ZFLATFILE. After I migrated the TR to QA, the Transfer Structure is in Revised status.
When i try to create an Info package to load a flat file, I am getting the below warning:
"Caution! Transfer method has changed." and the processing tab in Info package has ALE option instead of PSA.
I did check the the transfer method in Infosource and it is still PSA.
How can I change the version of Transfer structure from Revised to Active.I tried RS Trans Activate all and Datasource activate all. It dint work. Please suggest.

Hi Kavitha,
You need to delete the Transfer rules and Transfer structure from the QA system and Retransport from Development System.
We had the same problem in our proj.
Hope this helps.
Veerendra.

Similar Messages

Error while Activating the Info Source.

Hi Gurus,
We are in BI7 & SP14.
Here I am Activating the Infosource "0CO_OM_OPA_2" which i already assign the datasource "0CO_OM_OPA_2" to "0OPA_C11"Cube.But i am getting the following error message "Data element for InfoObject KOKRS 0CO_AREA could not be created".
Here the whole flow i am doing in old version(3.5).
Any one can help me to solve this issue.
Thanks
Raju.k

Please check your Infoobject is active or not. Even it is active please reactivate and check once again.

The logic board of my macbkpro 10.6.8 (OS ML) has died. I want t migrate info to another McbkPro (OS Snow Leopard) but is asking me to update to same OS. Can I update the latter to Mavericks and migrate the info from Mountain lion? thanks

Hi i took my macbook pro to an apple store because it would not start correctly. The veredict was that the logic board was dead. As this is a very expensive item to replace, I have decided I will buy a new one but I am currently overseas, and will wait a couple of months when I get back home. This is a macbookpro 15 inch early 2011, running on Mountain Lion OS. I have another macbook pro 13inch running on snow leopard. At the store we tried to migrate the info using an ethernet cable (using the "T" command on startup) but the system asked for an update of the OS. The guy at the store told me I had to update the OS so that the two macs would be on the same OS - mountain Lion. As the newest (and free) OS is Mavericks, I wonder wheather I coud update the 13 inch mac to mavericks and perform the migration. The guy at the store was explicit to say that if the OS were different it would not work. But reading on the apple website it seems that mavericks support this kind of migration altough is not explicit about it. Can you please help?
thanks

Hi BobRz,
As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD ?
2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
Thanks.

Error while monitoring the Info Package

Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.

Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D

Error while Migrating the custom routines in Transformations

Dear All,
I am in the process of migrating BW 3.5 to BI 7.0.I migrated the Standard cubes and DSO's from BW3.5 to BI 7.0 flow successfully.
But while migrating the transformations which are having the custom routines,I am facing the below errors.
The data object "COMM_STRUCTURE" does not have a component called BIC/ZGROSSPRI".But the routine contains BIC/ZGROSSPRI.
I tried to change the BW 3.5 terminology to BI 7.0 terminology.(Like COMM_STRUCTURE replaced by SOURCE_FIELDS).But unable to solve.There are nearly 20 custome routines written in all transformations.
Can any one guide me who faced the same tyepe of problem?
Thanks & Regards,
Dinakar

HI,
We need to include Source and Target see the below article.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
How to Correct Routines in Transformations
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20correct%20routines%20in%20transformations.pdf
Thanks
Reddy

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while migrating the ds

Hello BI Experts,
This is the error i am getting while migrating the ds.
Please suggest.
'The OLTP source ZISTRANS for source system ZFILE not present
Message no. RSDS034'
Thanks,
BWer

Check if the 3.X data source still active or you see a NW2004s datasource in the data source tree for the corresponding source system. This error message comes but the migration sometimes succesfully ends.
Regards.
Sanjay

Issue while fetching the file through *.extension by FTP sender file adapte

Hello Experts,
I am facing a issue while fetching the data through sender File adapter with ' *.file extension' .I am illustarting the scenario as below .
It is a simple scenarion of File to File inboumd scenarion.Here file is getting picked up from a third party system
through FTP sender chanel and stored in a temp folder of PI through NFS rceiver file adapter .
The problem is however I am getting, while picking the file with file name as "*.exo"(where exo is the file extension).
But while fetching the file with particular name like"abcd_10032011*.exo"(file naming has been done by combination of abcd(always same)_currentdate(change according to current date)),file picked successfully .
So here ,in the prior case file not getting picked up,but in later case it dose .
Can anyone please let me know what might be the issue?

Hi Sunit,
Connect from your PI System to 3rd Party System (where are placed the Source Files)
FTP <PartySystemHostName>
eg. FTP 10.2.3.456 (then insert Username & Password to Login)
Go to source directory
cd \<SourceDirectory>
eg. cd \donaldduck\directory\
Execute a File List command
ls -la *.<extension>
eg. ls -la *.exo
In this way you should be able to view all files with this extension (*.exo), the same action that Sap XI perform to pickup the file.
Then, try to copy that file to your Local PI System (to check if there're some permissions issue):
mget <filename>.exo
eg. mpget File1_01012011.exo

Getting issue while publishing the app studio

getting issue while publishing the app studio
error reported is The installable package was not created because the code generation failed.

touchdevelop qcxhb
& Jumping Lion is the name of the app.
is this the information you are looking
in source code it is showing the error as
Error downloading TouchDevelop package for script id 'qcxhb'. Reason: Errors in gamepad->game
not sure if this can help

Performance issue while opening the report

HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.

Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande

Error while migrating the discoverer repots

HI
we are getting the error while migrating the discoverer reports. Find the below script and the error.
-connect <**********>
-log log_file
-grant_privilege
-apps_user
-eul eul_us
-apps_responsibility DISCOVERER PROJECTS RESOURCE MANAGEMENT
-business_area_access xxxxx Projects
Command completed with errors - see log file for details.
java EulCommandLine -connect <**********> -apps_user -eul eul_us -cmdfile commands_ads_resp -log log_file
Started Fri Apr 24 06:37:45 EDT 2009 ...
Role 'DISCOVERER PROJECTS RESOURCE MANAGEMENT' not found
the above error says the role not found to the particular responsibility. Please let me know how to rectify the above error.
Thanks,
keka.

Hi Keka
I am assuming that responsibility does in fact exist in the database? If not, you will need to create it.
Also, try putting double quotes around the responsibility name.
Best wishes
Michael

Getting Duplicate Object existing issue while deploying the BIAR file

Hi All,
We are trying to deploy BIAR File with XI R2 Command tool InstallEntSdkWrapper. But we are getting Duplicate Object exixting issue while deploying the BIAR file.
Error Message:
[report] [InstallEntSdkWrapper.main] Connecting to CMS plmdevapp31:6400 as administrator
   [report] [InstallEntSdkWrapper.CmsImportFile] Exception: An error occurred at the server :
   [report] Failed to commit objects to server : Duplicate object name in the same folder.
   [report]
   [report] [InstallEntSdkWrapper.main] BIAR File could not be imported
If we are doing any promition with Import Wizard we have an option to "Overwrite object contents" option to overwite exixting objects. It will very helpful if any one suggest how we can achieve this through InstallEntSdkWrapper.
Unfortunately there is no documentation availabe on InstallEntSdkWrapper.
Cheers!

That's a limitation with the XI Release 2 InstallEntSdkWrapper.jar tool.
Sincerely,
Ted Ueda

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Issue while posting the invoice in background using the WF-BATCH user

Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.

Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin

Issue while Creating the records in OAF by disabling one field.

Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.

or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna

Issue while migrating the Info Source

Similar Messages

Maybe you are looking for