Issue while navigating through a search result link

Hello Experts,
We are facing a strange issue in our IC Web Client UI.
After an account is confirmed, and a wild card search is done on the Product Search work centre, a number of results are displayed in the list view below ( which extend to more than one page). The search result has a particular field 'Generic ID' which is a navigational link, and further filters the search results when clicked on it.
The issue is, if the Generic ID is clicked from one of the serach result in page 1 or 2, it takes the control to the next stage filtered search result page 1. But if the Generic ID is clicked from any other page other than the first two, it takes the control to the next stage filtered search results page 2.
I have debugged both the scenarios but there's no difference in the behavior of both.
Any pointers to why this is happening or how it can be solved will be highly appreciated.
Thanks,
Richa

Hi Prasenjit,
Thanks for your inputs.
I've debugged the scenarios, but I've been unable to locate any pointers to the current page, or the one being navigated to.
An OSS in this case can't be raised as the link which is being clicked is a customization. Hence, anything after that would probably be because of the customizations made.
Any pointers to where should I concentrate while debugging to find the current page number?
Rgds,
Richa

Similar Messages

  • Have search results link open in same window

    Hello,
    I'm looking at the FlexUI stuff and wondering before I delve too deeply... that and my Portal is currently not cooperating.  How can I make it so that when the user clicks on a search results link, it shows in the same window (as opposed to opening a new window)?
    Thanks,
    Mike

    Hi there,
    we had the same issue - I opened an OSS and got following reply :
    <i>
    <b>08.03.2007 - 12:45:49 CET    SAP    Reply</b>
    I have checked from my development colleague and confirmed that
    this parameter is not supported currently and development has recently
    no plans to support this feature.
    I apologize for the inconvenience caused here.
    Thank you for your cooperation.
    Best Regards
    </i>
    Can you believe this ? I don't, as this parameter has been around since SP12 or so and still there is no official note regarding this issue.
    > Please reward points :o) <

  • Google mobile search result links lead to downloading db file

    Firefox mobile on Galaxy Sii running rooted stock 2.3.5
    Google search takes me to google mobile results. Clicking on any result usually causes a popup "Complete action using DB Text Editor", and downloading of a file.
    If I change google settings to the classic view, instead of mobile, links function correctly.

    Thanks for the suggestion. In my case, the problem is Google Mobile/Symbian web browser-specific. The phone in general can access WLAN connections without any problems. I have tried all possible adjustments to both Google Mobile and Symbian web browser I can think of. I'm pretty sure the problem lies at the Google-server end of things: something about the way the search result links are formatted provides insufficient data to the Symbian web browser. It's strange that going through the cached page version to the current version works (as described above). Nokia s60 users experienced a similar (but not identical) problem in May of 2011, but someone at Google noticed the situation described on the Google Mobile Forum, and had the problem corrected. No such luck this time, I'm afraid. It may be that the s60v2 is getting to be too old for Google to bother with. It's a shame, but at least using Vlingo (or the runaround with the cached pages) there is a workaround.

  • Error while opening file from search result in SharePoint Server 2013

    Hi All,
    I have configured a file system search in SharePoint serve 2013, it is crawling the data and displaying in search result.
    But while click on file to open, it gives error "Cannot find 'file://filesystemPath/filename'. Make sure the path or internet address is correct.".
    I have given 'Everyone' to read and execute rights on shared folder (used in file system).
    Please guide me.
    Thanks in advance
    Dharmender Sharma

    Hi,
    Please check whether this issue occurred on all files or a specific file from the shared folder.
    1. If this issue occurred on a specific file, please check if the file exists in the shared folder, whether someone deleted it.
    2. If this issue occurred on all files , please check the network and make sure the shared folder is online
    Feel free to reply if the issue still exists.
    Best regards
    Wendy Li
    TechNet Community Support

  • People Search results links are incorrect?

    Hello Everyone,
    Just setup People Search on SP2013 SP1 (July 2014 CU).  I have not used it in the past.
    I am finding that after I search for a staff member the results show fine.  However if I click on the user link to go to their MySite page I get the "Sorry, something went wrong" page with "User not found".
    When comparing the URLs I see this difference:
    Url from search result -
    https://.../Person.aspx?accountname=DOMAIN%255Cusername
    Url to the users MySite -
    https://.../Person.aspx?accountname=DOAMIN%5Cusername
    It appears is adding a 25 in the url preventing the "\"?
    Can anyone confirm if this is a bug in SharePoint 2013 SP1 (July 2014 CU)?
    I came across these articles which leads to think so.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/17005728-3e68-49f5-8882-85cc8260e53b/people-search-error?forum=sharepointgeneral
    http://sharepoint.stackexchange.com/questions/97882/my-sites-link-in-search-resuls-is-incorrect-escaped

    Yeah, that's a known issue caused by the MS14-022 security patch.
    It is hoped that it's in the September CU according to Stefan's comment in the link below:
    http://blogs.technet.com/b/stefan_gossner/archive/2014/08/13/august-2014-cu-for-sharepoint-2013-has-been-released.aspx

  • How do you create a "back to search results" link in PHP MySQL

    Can someone just explain the basic principle behind this one:
    I have a search facility which reveals a search results page - a  list of products. After clicking on a product you then go on to another menu of product images which you may (or may not) trawl through. At present when a user is finished they have to click the back button until they get back to the search results (which could be ten clicks or more).
    I would like to create a link on the product detail page and product images page that simply allowed the user to "Go back to search results".
    So how do I capture the search results url+ parameters to allow me to do that?
    Can anyone give me a pointer or two?
    Cheers
    Dave

    Okay, I'm pretty sure I can figure that one out. But before I get stuck in this question springs to mind.
    I may be being a bit daft here but at present the search form is set up to deal with the $_POST variables from the form on that page when they are submitted.If I send users back to that page armed with the session variables (which now have the same values as the original $_POST variables how can I get the page to automatically use the session variables instead of the $_POST variables it is waiting for?
    Dave

  • Search results link which open in same window

    Hello,
    i want to open the search result documents in the same window as the search result. Therefore i edit the field 'Target Window Type' in the SearchResourceRenderer to 'SELF'  which is used in the SearchResultLayoutSet.
    But the document also is opened in a new window.
    What i have to do?
    Best regards,
    TomSd

    Hi there,
    we had the same issue - I opened an OSS and got following reply :
    <i>
    <b>08.03.2007 - 12:45:49 CET    SAP    Reply</b>
    I have checked from my development colleague and confirmed that
    this parameter is not supported currently and development has recently
    no plans to support this feature.
    I apologize for the inconvenience caused here.
    Thank you for your cooperation.
    Best Regards
    </i>
    Can you believe this ? I don't, as this parameter has been around since SP12 or so and still there is no official note regarding this issue.
    > Please reward points :o) <

  • How to display the detailed navigation with the Search Results

    Hello Gurus,
    I was able to display the search results in the same frame rather than opening the new window and getting it displayed. Now when the search results are displayed, my detailed navigation and portal favorites etc.. all the iviews are automatically suppressed.
    Please help me displaying the search results with Navigation Panel.
    Regards
    V.

    Hi Vaibhav,
    What do you mean by suppressed?
    Is it gone, or just closed?
    If it is just closed, you can try 2 things:
    1. Check if the property "Initial State of Navigation Panel" of the page has any influence.
    2. There is a javascript method that opens it.
    You can see it by importing the file '<b>com.sap.portal.layouts.framework.par.bak</b>'.
    Navigate to
    System Administration -> Support -> Support Desk -> Portal Runtime -> Browse deployment
    then the folder
    ROOT/WEB-INF/deployment/pcd
    and press download.
    Import from par to Developer Studio, and check the javascript files under dist/PORTAL-INF for a function called something like 'expandTray'.
    Hope that helps,
    Yoav.

  • Google search results link back to Google's front page

    My Firefox 9.01 under Ubuntu Linux 10.04 seems to have a problem with the links in the results (hits) from Google. When I click on a link, I am directed to Google's front page.
    Example:
    I enter the search phrase 'occupy wall street demands' into Google Search. One of the hits I get is Wikipedia's entry on Occupy Wall Street. The URL is en.wikipedia.org/wiki/Occupy_Wall_Street
    When I click on this hit, I come to a page with this URL:
    http://www.google.com/webhp?emsg=NCSR&noj=1&ei=oAosT9jsCcL64QS2xLCrDg
    which shows Google's front page.
    However, if I right click on the link ans select "Open link in new window", then Firefox correctly opens the new window with the Wikipedia article.
    Other browser on my computer does not have the same problem. I have also emptied Firefox's cache and it did not solve the problem.
    What's going on here?

    I noticed this happens less often (or not at all, maybe) when you are not logged in with your Google account. Are you logged in to Google, or maybe Google+ even?
    When I'm logged in to Google+ and click a search result after using the searchbar in Firefox, I get to see the Google homepage. Clicking the Back button brings me to the page I visited before using the search bar, not back to the search results.
    It's definitely an annoying workaround to log out just to be able to click search results, but it could help isolating the problem.
    Also, you can open the search results by middle-clicking them and opening them in a new link. Not a solution either, but less annoying than restarting the browser. ;)

  • DPS 6.3.1.1 - Issues while connecting through SSL

    Hello !!
    I have a issue where my application client reported that they are unable to connect to the LDAP using SSL. Where as everything works fine in LDAP (non secured)
    This is how our deployment looks.
    Clients <=> Load Balancer <=> DPS (2 instance) <=> DS (2 masters)
    The DPS is configured with DSP (data source pool) (with proportional algorithm of 50:50 to backend data sources). Client Affinity ("read-write-affinity-after-any") is configured for this DSP. The DSP is attached with 2 data sources.
    So when the client connected in a secured port using LDAPS, they are unable to authenticate/search against this environment. No issues were found in DS logs for any of the bind/search requests. But in DPS, we noticed below log which i want to get clarification on.
    Note: I have removed the hostnames/Ip where ever applicable from the logs.
    =====================================================
    [04/May/2011:12:24:39 -0400] - PROFILE - INFO - conn=1255260 assigned to connection handler cn=default connection handler, cn=connection handlers,cn=config
    [04/May/2011:12:24:39 -0400] - CONNECT - INFO - conn=1255260 client=x.x.x.x:52461 server=x.x.x.x:636 protocol=LDAPS
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=0 BIND dn="uid=app_id,ou=applications,dc=example,dc=com" method="SIMPLE" version=3
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=0 BIND dn="uid=app_id,ou=Applications,dc=example,dc=com" method="SIMPLE" version=3 s_msgid=3 s_conn=ds_Master2:26560
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=0 BIND RESPONSE err=0 msg="" s_conn=ds_Master2:26560
    [04/May/2011:12:24:39 -0400] - PROFILE - INFO - conn=1255260 assigned to connection handler cn=CH_ENV_catch-all_LDAPS,cn=connection handlers,cn=config
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=0 BIND RESPONSE err=0 msg="" etime=0
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=1 msgid=2 SEARCH base="ou=people,dc=example,dc=com" scope=2 filter="(uid=abcdef)" attrs="*"
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=1 SEARCH base="ou=people,dc=example,dc=com" scope=2 filter="(uid=abcdef)" attrs="*" s_msgid=498 s_conn=ds_Master1:26072
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=1 SEARCH RESPONSE err=0 msg="" nentries=0 s_conn=ds_Master1:26072
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=1 SEARCH RESPONSE err=0 msg="" nentries=0 etime=0
    *[04/May/2011:12:24:39 -0400] - DISCONNECT - INFO - conn=1255260 reason="other" msg="Exception caught while polling client connection LDAPS.x.x.x.x.52461 -- javax.net.ssl.SSLException: Inbound closed before receiving peer's close_notify: possible truncation attack?"*
    =======================================================
    If noticed in the above logs, the initial Bind request via LDAPS is routed to Master 2. But the susequent search request (for user abcdef) is routed to Master 1.
    And finally the DISCONNECT operation came (last line) without a proper unbind.
    Is this alternate routing a expected behavior when client affinity is turned ON ? Is this exception causing the application's search failures ?
    Please shed some pointers on this..
    Thanks.
    Edited by: Prasee on May 6, 2011 8:07 AM

    Pls see inside:
    Thanks for the reply. Yes the client is a loadbalancer in this case. So does it mean that this behavior (sending request to 2 different DS in a same connection) is expected ? I have few additional queries that arise from your reply :-)
    Loadbalancing algorithm takes precedence "if the request that starts client affinity has not yet occurred"
    Since its the load balancer that connects to DPS for any/every request every time., How do the DPS know whether a request that starts client affinity has occurred / not occurred ?Well, client affinity starts with a certain operation (not by establishing the client<->dps connection) as specified by your client affinity policy. In your case ("client-affinity-policy:read-write-affinity-after-any") it starts for all operations after the first read or write operation. DPS is not a (network) connection based router - so it does not route the client connection to the data source but forwards the client operations (request) on dedicated bind,read,write,.. connections to a data source selected by your load balancing and/or client affinity policy.
    In our case, Its the same connection (conn=1255260) that receives bind and search request from the client. So when a connection is established, the client affinity should have got enabled and sent the bind request to Master 2 initially, so for the next search request, shouldn't it be sent to Master 2 again ?No, see above.
    >
    Sorry for these questions, I am basically trying to understand more on how client affinity works when a load balancer is in between.
    Coming to the exception,
    [04/May/2011:12:24:39 -0400] - DISCONNECT - INFO - conn=1255260 reason="other" msg="Exception caught while polling client connection LDAPS.x.x.x.x.52461 -- javax.net.ssl.SSLException: Inbound closed before receiving peer's close_notify: possible truncation attack?"
    Does this abrupt shutdown of connection means the search response would have got dropped before reaching the end client (application) ?Yes, that may be possible ...
    >
    Thanks for your help !!

  • Possible virus? Google search results links hijacked

    I'm trying to understand a new problem I have run into with my iPad. Recent google searches have not been able to direct me to the link given by google. Almost all results are redirected once they are clicked on. I would understand if these were some of the smaller less reputible websites but this is happening with pages like Cnet. Has anyone else run into these problems?

    When you say redirected do you mean you first get an almost black page that say something like site has moved and fi you do not get automatically redirected click here?
    Does the redirection get you to the right site?
    Have you tried same thing with you computer?
    If works OK with computer what is the DNS (address) are you using for both the computer and iPad. If not OK on both what are the DNSs.

  • Business Rule calc manager issue while executing through Planning Smartview

    Hi,
    I am working on Hyperion Planning 11.1.2 and I have created few business rule in Calc manager. When user is opening it through Hyperion Planning webforms its working fine.
    I have attached the rules on webform and they run on Save and use member on data form and Hide prompts.
    All these properties are checked. So user enter the number on Planning webform and hit on save rule will cruch on the POV members.
    Please help me on below 2 issues:
    1.When user is using the Smartview Planning and opening webform in Smartview while exceuting the rule its throwing error. Can't run the rule.
    What is the exact provsiong I need to give so that they can execute it from the Hyperion Smartview Planning also.
    Currently HBRAPP is Interactive user
    and Application level is Interactive user and Essbase write access
    If I am giving Administrator access they are bale to run the rule, I can't give Administartor acess.
    2.While running rule even with admin access its not taking the POV, its taking the default mebers which I have given while creating the variables.
    However from Planning web it takes the POV selection of webform,
    Please suggest why the same thing is not happening from Hyperion Smartview.
    Thanks in advance
    Pankaj

    Please advise on this issue. Any help would be highly appreciated.

  • Issue while posting through MIRO

    Hi,
    I am posting through MIRO.
    I am using two POs in MIRO from different contracts.
    When I add them for one PO amount and QTY feild is filled up properly,
    but for other the value of QYT is filled into amount and qty field.
    Could any one help in solving this issue.
    Thanks in advance.

    Hi
    You ae trying to post two POs from different contracts (i assume for same vednor)
    When you allocate the first PO, everythin is fine
    when you subsequently allocate the second PO, the vale and qty fields are not populated properly.
    Is this right?
    What values are going to the qty and value fields of second PO?

  • When-tree-node-selected not fire while navigating through keyboard(Urgent)

    i am using treeview for displaying chart of account and fires the above said trigger in the form, but the trigger has no effect whilt navigating tree view with keybpard arrow keys until user explicitly select the node through mouse help me out plzz
    i want that trigger also fires when user navigate and select node through keyboard or through mouse thanks
    its urgent

    Stop duplicating your threads!!!
    when-tree-node-selected (Urgent)
    You posted the same question 2 days ago and I've answered you, you didn't even provide an exact version of your forms.
    Posting again will not change your problem.
    Do not waste space on the forum.

  • Crystal report issue while running through online in Peoplesoft

    Hi,
    Message log shows:
    Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running
    View log shows:
    Message Set Number: 0
    Message Number: 0
    Message Reason: Invalid User ID and password for signon. (0,0)
    I am getting the above error when am running the crystal report through process scheduler with my user id in peoplesoft..whereas when i run it using admin id i.e.VP1 it goes to success. We tried by deleting the process scheduler cache but no luck.
    Note:All the crystal reports that are running with my id are going to error(shown above).None of the reports are working even the delivered crystal reports.
    Any help is appreciated!
    Sudhir
    Edited by: sudhir7284 on Jul 21, 2011 2:15 PM

    Hi Sudhir,
    Peoplesoft is an OEM Partner of ours and they support their product. We don't have it here so we can't help you.
    Please contact PS for support and mark this post as answered.
    Don

Maybe you are looking for