Issue while opening websites from module pool subscreen.
I have three subscreens which do open while user clicks a radio button on the main screen . Now in two of the subscreens,there are two text fields which contain url of two websites . When i am setting a GUI status when sy-pfkey/sy-ucomm = 'PICK' , they are getting set but inside the PAI of subscreens when I am writing :-
When sy-ucomm = 'PICK'.
call fn 'call_browser'.
The websites don't open because the PICK fn code is not getting triggered.
In two of the subscreens ,the website addresses / urls will be fixed whereas in the third subscreen,the website address comes from field "tline" .
So I can't handle the scenario through buttons and assigning function codes to them.
Pls advise.
Dear Subankar,
For that screen filed select option like drill down with key.
Regards,
Madhu.
Similar Messages
-
Issue while opening BI4 webi report instance using CMC on IE8 browser
Hi,
Having issue while opening BI4 webi report instance using CMC on IE8 browser.
Steps to reproduce the error:
1. Login to CMC
2. View Webi History.
3. Open successful instance (For the 1st or 2nd time reports are opening up, from the 3rd time it just freeze the session)
4. After it get freeze we need to close the IE using Task Manager.
Can any one please suggest a resolution for this issue.
Thanks,
Ganesh.MHello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor -
Issue while opening webi reports using OpenDoc url in Chrome browser
Hi
We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
thanks
GokulHello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor -
Performance issue while opening the report
HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande -
Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2
Hi Friends,
While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
ThnxThe name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
Have you tried this
http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
regards
Nasir -
Starting AMT FailedI am facing the same issue while opening AMT/Mobile Sale
Hi All,
I am facing a issue while opening AMT/Mobile Sales Appl/System Maintenance. I am getting the error saying 'UI_CORE_APPL_LAUNCH_FAILED_STA'. Could anyone out there please tell me how to resolve this issue?
I checked the UID and PWD under HKEY_LOCAL_MACHINE\SOFWARE\SAP\MSA\MW\secutiry for IDES DB and they are consistent with the ODBC parameters for IDES.
Much appreciated,
Karuna.Hi All,
my issue is resolved. The problem with my issue was the missing entry in the table SMO_AUTH_SYS. I found the note 687679 and ran the report according to it. With that table SMO_AUTH_SYS was populated with the record. Later i was able to connect to AMT and gave the standard role SAP_AMT_USER and since then i am able to log into MSAA application and also MSY application
My issue is resolved. Thanks for everyone who tried to help me out.
Thanks,
Karuna. -
Remove
alert
|
Edit
|
Change
type
0
We are on windows environment as below -
Server -
- Win2k8 Std R2,
- SQL 2008,
- SP 2010 Foundation SP2
Client -
- Win 8.1 64 Bit OS,
- Browser - IE 11
- MS Office - 2010 - 14.0.4763.1000
Problem -
While Opening links from word document(Ctrl+Click) , get error message "An Unexpected
Error had occured". And link is not opened.
We are using this client using remote desktop.
Any ideas on this?
Does Microsoft provided any fixes for this?
shwetankHi,
Have you tried the hyperlinks in other Office programs like Outlook and PowerPoint? Do they work well?
You may need to run the Fix it in this kb below:
http://support.microsoft.com/kb/310049/en-us
You can also try the steps in the section "Let me fix it myself". Although this kb is written for Outlook, it may help in your scenario as well.
I hope this is useful.
Regards,
Melon Chen
TechNet Community Support -
Generating a spool from module pool
hi all,
i have a requirement to directly send output to a spool. the program type is module pool. is it possible to write the output in spool from module pool. please explain how to do that.
Thanks in advance.
Regards,
Lakshmi.What it the output of the program that needs to go to spool? Is it a list?
If its a list, try to write that as separate report program and you can submit that in the dialog program and the spool will be created.
SUBMIT report and RETURN.
Regards,
Ravi
Note - Please mark all the helpful answers -
Calling Smartforms from Module pool: Most Urgent
Hi, Exeperts
how can I call smartforms from module pool.
I have done like below.
First Created a push button on screen and used
these code in user command through PAI
FORM CALL_SMARTFORMS .
DATA: V_FORM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSMART'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
ENDFORM. " CALL_SMARTFORMS
now I am getting form name in v_form_name, but it is not executing.
Please help me out.
Regards
Rajiv singh.Well, as it's most urgent....
One you have a value in V_FORM_NAME you need to call this function module, passing the fields and strucures that make up the interface to your form.
Eg.
DATA: DEVICE TYPE SSFCTRLOP .
DEVICE-DEVICE = 'PRINTER'.
DEVICE-NO_DIALOG = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = device
USER_SETTINGS = 'X'
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
Regards,
Nick -
Trigger a workflow from module pool screen at save button
Hi,
I am new to workflow.Please help me.My requirement is trigger a custom workflow from module pool screen at save button.
Scenario is: Create a Z screen for material creation and after pressing save button workflow should trigger to approver and approver emailid should be fetch from Z table and have to provide a link in work flow for Z t-code which displays a report of material pending for approval..
Please suggest me process how i can acheive this..
ThanksHi,
If you're using standard bapi's to save the material, you can then use either the standard events which are already triggered or you coul add a change document for material changes or creation.
Then this event can be the trigger of your custom workflow.
Kind regards, Rob Dielemans -
Caling smart form from module pool
Hi,
i want to call smartform from module pool screen when click on some pushbutton.
ex i want to call smart form of sales order by passing perticular S.O number from module pool screen.
plz help me o get this.
thanks.Hi,
Enable hotspot option in the field catalog for the .SO.NUMBER field. On clicking on SO.Number
get the cursor field value and call the smart form in the PAI (ie., in user_command module).
Probably pick ucomm triggers with hotspot.
Venkat. -
How to extract the data from module pool program to Excel Sheet?
Hi Guys
I am having a requirement to transfer the data from Module pool screen to excel sheet directly.
This is an urgent requirement.
So plz reply me with some coding examples.
I will give points for that.This report extract excel file. From that concept you can easily extract data from module pool program also by coding in PAI of the screen.
REPORT ztest1 .
* this report demonstrates how to send some ABAP data to an
* EXCEL sheet using OLE automation.
include ole2incl.
* handles for OLE objects
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
h_c type ole2_object. " color
DATA: FILENAME LIKE RLGRAP-FILENAME.
tables: spfli.
data h type i.
* table of flights
data: it_spfli like spfli occurs 10 with header line.
*& Event START-OF-SELECTION
start-of-selection.
* read flights
select * from spfli into table it_spfli.
* display header
uline (61).
write: / sy-vline no-gap,
(3) 'Flg'(001) color col_heading no-gap, sy-vline no-gap,
(4) 'Nr'(002) color col_heading no-gap, sy-vline no-gap,
(20) 'Von'(003) color col_heading no-gap, sy-vline no-gap,
(20) 'Nach'(004) color col_heading no-gap, sy-vline no-gap,
(8) 'Zeit'(005) color col_heading no-gap, sy-vline no-gap.
uline /(61).
* display flights
loop at it_spfli.
write: / sy-vline no-gap,
it_spfli-carrid color col_key no-gap, sy-vline no-gap,
it_spfli-connid color col_normal no-gap, sy-vline no-gap,
it_spfli-cityfrom color col_normal no-gap, sy-vline no-gap,
it_spfli-cityto color col_normal no-gap, sy-vline no-gap,
it_spfli-deptime color col_normal no-gap, sy-vline no-gap.
endloop.
uline /(61).
* tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
* PERCENTAGE = 0
text = text-007
exceptions
others = 1.
* start Excel
create object h_excel 'EXCEL.APPLICATION'.
* PERFORM ERR_HDL.
set property of h_excel 'Visible' = 1.
* CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:kis_excel.xls'
* PERFORM ERR_HDL.
* tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
* PERCENTAGE = 0
text = text-008
exceptions
others = 1.
* get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
perform err_hdl.
* add a new workbook
call method of h_mapl 'Add' = h_map.
perform err_hdl.
* tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
* PERCENTAGE = 0
text = text-009
exceptions
others = 1.
* output column headings to active Excel sheet
perform fill_cell using 1 1 1 200 'Carrier id'(001).
perform fill_cell using 1 2 1 200 'Connection id'(002).
perform fill_cell using 1 3 1 200 'City from'(003).
perform fill_cell using 1 4 1 200 'City to'(004).
perform fill_cell using 1 5 1 200 'Dep. Time'(005).
loop at it_spfli.
* copy flights to active EXCEL sheet
h = sy-tabix + 1.
if it_spfli-carrid cs 'AA'.
perform fill_cell using h 1 0 000255000 it_spfli-carrid.
elseif it_spfli-carrid cs 'AZ'.
perform fill_cell using h 1 0 168000000 it_spfli-carrid.
elseif it_spfli-carrid cs 'JL'.
perform fill_cell using h 1 0 168168000 it_spfli-carrid.
elseif it_spfli-carrid cs 'LH'.
perform fill_cell using h 1 0 111111111 it_spfli-carrid.
elseif it_spfli-carrid cs 'SQ'.
perform fill_cell using h 1 0 100100100 it_spfli-carrid.
else.
perform fill_cell using h 1 0 000145000 it_spfli-carrid.
endif.
if it_spfli-connid lt 400.
perform fill_cell using h 2 0 255000255 it_spfli-connid.
elseif it_spfli-connid lt 800.
perform fill_cell using h 2 0 077099088 it_spfli-connid.
else.
perform fill_cell using h 2 0 246156138 it_spfli-connid.
endif.
if it_spfli-cityfrom cp 'S*'.
perform fill_cell using h 3 0 155155155 it_spfli-cityfrom.
elseif it_spfli-cityfrom cp 'N*'.
perform fill_cell using h 3 0 189111222 it_spfli-cityfrom.
else.
perform fill_cell using h 3 0 111230222 it_spfli-cityfrom.
endif.
if it_spfli-cityto cp 'S*'.
perform fill_cell using h 4 0 200200200 it_spfli-cityto.
elseif it_spfli-cityto cp 'N*'.
perform fill_cell using h 4 0 000111222 it_spfli-cityto.
else.
perform fill_cell using h 4 0 130230230 it_spfli-cityto.
endif.
if it_spfli-deptime lt '020000'.
perform fill_cell using h 5 0 145145145 it_spfli-deptime.
elseif it_spfli-deptime lt '120000' .
perform fill_cell using h 5 0 015215205 it_spfli-deptime.
elseif it_spfli-deptime lt '180000' .
perform fill_cell using h 5 0 000215205 it_spfli-deptime.
else.
perform fill_cell using h 5 0 115115105 it_spfli-deptime.
endif.
endloop.
* EXCEL FILENAME
CONCATENATE SY-REPID '_' SY-DATUM+6(2) '_' SY-DATUM+4(2) '_'
SY-DATUM(4) '_' SY-UZEIT '.XLS' INTO FILENAME.
CALL METHOD OF H_MAP 'SAVEAS' EXPORTING #1 = FILENAME.
free object h_excel.
perform err_hdl.
* FORM FILL_CELL *
* sets cell at coordinates i,j to value val boldtype bold *
form fill_cell using i j bold col val.
call method of h_excel 'Cells' = h_zl
exporting
#1 = i
#2 = j.
perform err_hdl.
set property of h_zl 'Value' = val .
perform err_hdl.
get property of h_zl 'Font' = h_f.
perform err_hdl.
set property of h_f 'Bold' = bold .
perform err_hdl.
set property of h_f 'Color' = col.
perform err_hdl.
endform. "FILL_CELL
*& Form ERR_HDL
* outputs OLE error if any *
* --> p1 text
* <-- p2 text
form err_hdl.
if sy-subrc <> 0.
write: / 'OLE-Automation Error:'(010), sy-subrc.
stop.
endif.
endform. " ERR_HDL -
Special character issue while loading data from SAP HR through VDS
Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
ThanksWe are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards. -
SSO Issues while opening a ppt file document only from Solution Manager
Hi Experts,
Version - Solman 3.1
Issue
=====
While trying to open a Powerpoint(ppt) file document, from the service provided by Solution Manager thru a weblink:
1.A SSO authentication request of the server pops up requesting to authenticate Windows userid/password
2.After entering the windows password the first time..authentication is requested again..At times on the second chance of authentication, the request is successfull and the powerpoint document opens.. But we have faced issues wherein the issues had persisted for 5-6 chances and only then the ppt document opens.
3.Point to be noted is that even if the SSO authentication of the windows password is cancelled even the first chance the document opens..
4.Issue is only with powerpoint document and not with word document..
Going by point 3.. there is no relevance of the windows authentication to popup since authenticating or not authenticating doesn't matter.
Issue unknown is why is that whenever only a ppt document from Solman is being opened does the SSO Windows authentication window of Solman server opens.. Is there any settings to be considered..
Regards,
NagendranSince I am new to the field requesting the kind quick help by java experts here to help me change the code so that I would be able to search a web apge saved on disk and search and highlight a word in that page ....
Thanks in advance........
Looking forward for your kind suggestions......1) Did you write that code? If yes, proceed to 2). If no, I charge 150 euros/hr. Let me know when you want me to start.
2) Post the code for a program that opens a text file with the following in it:
hello world
and prints the contents out using System.out.println().
3) Modify the program in 2) to determine if the file contains the word "yes". Post the code.
4) An html file is no different than the text file in 2). -
Hi
I my module pool application, I have a tab strip having 4 tabs designed in local scrolling (PAI). But after entering some values on tab 1 , when I navigate to tab 2, the gui components of tab1 also appear on tab2 and screen becomes messed up.
How to correct it?
Regards
Vishal KapoorHi,
Just check if u are using same subscreen area and calling the same subscreen in all of them..
If u use different subscreen area for each tab then try this:
Pbo.
Call subscreen subarea1
Including sy-cprog subscno.
Call subscreen subarea2
Including sy-cprog subscno.
Call subscreen subarea3
Including sy-cprog subscno.
Pai.
Call subscreen subarea1.
Call subscreen subarea2.
Call subscreen subarea3.
If u are using same subscreen area for all tabs then try this :
Data dynnr type sy-dynnr.
Pbo.
Case my_tab-activetab.
When fc1.
Dynnr = subscno1.
When fc2.
Dynnr = subscno2.
When fc3.
Dynnr = subscno3.
Endcase.
Pai.
Case ok_code.
When fc1 or fc2 or fc3.
My_tab-active tab = ok_code.
Endcase.
hope it helps.
reward if useful.
Maybe you are looking for
-
String Comparision in XSLT Mapping
HI All, Can any one suggest me to compare the two strings in XSLT mapping.Please let me know is there any string comparision function in xslt? Thanks Pullarao
-
Max. No. of People in a meet me conference
Dear All, I have 6 software conference bridges in one cluster. All the servers are running Cisco CallManager and IP Voice Media streaming application services In service parameters for Cisco CallManager service "Maximum MeetMe Conference Unicast" is
-
How do we write the syntax to show the default values in other languages
Hi, we have siebel ondemand in 3 different languages-Mandarin, English, and Korean. We need to sett he default value of SR Status= Open (for English user), Open in Mandarin 进行中(for Mandarin user) and Open in Korean 진행중(for Korean user). how do we wri
-
Dear all, Is there any way to make bank data required while creating vendor master? Best regards
-
Where can i find any source code of master detail java form without using BC4J?