Issue while Printing in PDF

Hi All,
I have desinged a template with layout (21cmX14cm).
but when view the output in PDF it is not showing in that size. it is adjusting the size of its own.
Can anyone tell me how to view the output in the same size as the layout.
Regards,
Jana

hi
as the template size increases...the output size will decrease....
u will not get the output of the PDF as same as the RTF template size....
only solution is to decrease the template size...

Similar Messages

I have a user that has an issue when printing to PDF.

I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
Acrobat 11 Pro
Windows 7 x64
Office 2010 Professional
Any help would be great! Thanks

I manage a network of 30,000 + workstations all with Acrobat Pro 10. Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer. The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed. For example we can print google.com, but not yahoo.com.
And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
I hope this is getting addressed soon!

Different colors while printing a PDF

I have a problem while printing my pdf document, that was generated by a mPDF library (php). When printing it in Сhrome browser the colours differ from ones i get from adobe viewer. Can anyone advice on this issue, please?
Left is Adobe, right is chrome. I need right colours in adobe.

Also, is it a PostScript printer, used with a PostScript driver? Will it always be the same printer?

Issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.

I've encountered an issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.
The document and printer settings are set for A4 but the print job goes to the printer as A3.
The problem only occurs while printing through Adobe Photoshop CS6.

I get into trouble if I choose A4 borderless instead of A4 in the Photoshop Print settings.
There, Tray 2 is dimmed out
To be honest, I don't see borderless in your settings, but my doing that on my printer causes a default to the larger Tray 1.
That's all I have tonight. If I think of anything else, I'll post it. Here's thread on this issue as well.
Wrong paper size sent to the printer

Issue while Printing Barcode

Hi All,
We have an issue while printing Barcode from SAp script.
We are using the barcode BC_C128B with font HELVE 10. We can see proper length of bar code
in print preview but when we take the print of the Bar code the dimensions of Bar code get doubled.
Could you please provide some expert inputs?
Thanks
Saurabh

Use SE73 and change the font in the barcode as per your requirement , if this barcode is used in any other programs then copy this barcode to Y or Z name and change according to your need and use it in your program
a®

Indesign randomly crashes while printing to pdf

Hi
One of our users has a very frustraiting issue. The full CS3 suite was installed on his newley built windows 7 X64 system. And all updates have been applied. for a few days everything worked perfectly, but then when printing a broucher to PDF indesign crashed while downloading procset. From then on the user could not print anything, and the print queue said "downloading low level document". the only way we have found to resolve it once the error has occured is to restart the machine. once the machine has been restarted the printing will be fine again for a random amount of time before the same thing happens.
The machine has all the latetes updates for windows, CS3 and the adobe pdf driver. Is this a known issue and are there any work arounds
Thanks in advance

I am having this EXACT same issue on my system. I am running 64bit Windows 7, and am using CS4 instead of CS3. Randomly, indesign crashes when printing a PDF at the 'DOWNLOADING PROCSET' status. From there, no PDF related things work. I can't print any PDF files to any printers, or print to PDF from any other applications.
Anyone have any ideas on this. It is a pain to have to restart my computer 5 to 6 times a day.

Out of Memory Error while printing to PDF

I am using Apache FOP with OC4J on windows platform for printing to PDF. I got the following error when printing a report with about 10,500 records to PDF.
07/09/20 15:23:07.78 fop: Servlet error
java.lang.OutOfMemoryError: Java heap space
Is there a way out of this problem. Could anyone please give me some suggestions?
Thanks in advance
Ravi

You can try adding a -Xmx128M (or larger) when you run the java command to start oc4j.jar

Over flow issue while printing footer in last page in PDF forms

Hi,
Could any one let me how to display footer in last page only at end of page reserving 5cm of space.
I have designed my form with two pages:First Page and Next Page in Master Page
Body Page contains table details and some texts after the table lines.
First and Next Pages has footer(5cm) at the bottom.
If Page <> Last Page,footer is not displayed.
If page = Last Page, footer should be displayed at the very end of the page
I have a table with multiple line items. If the line items end in First page the footer should be displayed at the bottom of the page. If the line items flow to the next pages footer should be displayed in the last page only. Next pages should be using the footer space at the end of each page if it is not the last page.
If the positions are wrong can anyone suggest the position of the footer space and how to stop overflow of the line items onto the footer

You have to place the footers in 2 main windows.
write script to hide the footer if the current page is not last page. Use below script to find the total number of pages and current page in layout:ready event.
Var no_of_pages = $layout.pageCount ( )
Var curpage = $layout.page ( ref ( $ ) )

Random Issue while printing a document

Hi All,
I'm facing a very typical issue where the alignment of the layouts gets changed randomly while taking printouts. For ex. whne we print Invoices, we require 4 copies, the user prints 1 copy first and then prints 3 copies. At times, there is alignment issue (distorted lines) during the first print out and at times there is issue in the copies.
This issue is purely random. We might get the issue say for invoice no. 3, but if we try to print it later, it gets printed without any issue.
What might be the cause of this??
Thanks,
Joseph

Hi,
In our case, since every printer have different settings we created PLD for each printers.
Example in you case.
PLD for HP Laserjet 1022.
PLD for HP laserjet 1010 AND
PLD for Sharp 5316 printers.
Thats the only option you have left.
Or you may convert to PDF then print which is very long process already
Thanks,
Clint

Urgent: Issue while displaying the PDF Reports Using XDO Common region

Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep

Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep

Blue screen while printing to PDF with Adobe

Hi,
I'm using Adobe Acrobat to produce PDF files. A few days ago, all of the sudden, each time I try to create a PDF with the virtual printer, I get a "Blue Screen Of Death" reporting some problem on the win32k.sys file.
I'm using Windows Vista Professional 32 bits and Adobe Acrobat 9.
Best regards.

Which version of AA9. There have been 7 updates or so. You might try a repair and then do any uninstalled updates (in order, they are not cummulative). The repair may resolve the issue or you may have run into some other bug that the updates might fix.

Issue While printing / Previewing a Adobe form in Web Dynpro ABAP application

Dear All,
We have designed 4 different adobe forms using SFP transaction for 4 different countries in SAP system.
Every country have different terms and conditions and therefore we have placed static texts (Hardcoded text) with text in different styles. Some text is in bold, some in different font (Bold, Italic). Font and Paragraph settings of the text was done as per expected. All the forms have same font and paragraph settings.
When we Launch Web Dynpro ABAP application to open the form in Print preview or to take print, form is not getting displayed / printed as it is designed in SFP. But if you open the form in SFP, everything looks fine.
It is working fine for 3 different forms but problem with only 1 form.
Kindly guide what is the reason for this strange issue when previewed or taken print. It is very urgent.
Thanks,
Bharath.K

Dear All,
Thanks for your responses.
We had identified the reason.
Customer has provided terms and conditions for all 4 countries in PDF document. Along with PDF, for 3 out of 4 countries customer has shared pre-prepared word document with pre aligned and justified terms and conditions as per expected outcome. We copied this text from word to Adobe form layout. It worked fine. For 1 country, customer have not shared terms and conditions in word document. Therefore we had copied text directly from adobe PDF document in to Form layout. Then this issue happened.
Solution for this issue is to, prepared a word document with expected alignment and justification of terms and conditions text . Then copied from word to adobe livecycle designer form layout. It worked fine.
Thanks,
Bharath.

Strange issue while printing invoice *** delivery challan

Dear experts,
I have a strange prob while taking out the printout of invoice ***/delivery challan.
We have two different locations (plants) A and B.
In sapscript layout we have defined GRN no and truckno in bottom windows and
type of invoice on upper part windows.
We are able to see complete output on preview in DEV,QAS,PRD
but on PRD when we take printout , part of output gets skipped on printing
though visible otherwise on preview.
What could be reason ?

Aditya,
Generally you face such problems in HP Printers.
Are u using HP laser Jet Printer .
Ok let me generalise the issue , you gotta ask ur basis guy to istall the latest driver for that printer
this will most probably solve ur problem.
Remember that once u get the print preview right , its either problem with the Basis or the printer.
If its a Z layout then ask ur Basis guy to check the internal setting as to at what height he is giving the page skip.
Regards,
Ravi Kiran

Firefox prints all webpages as images while printing as pdf.

I save pages as pdf using PDF-Printer that comes with Acrobat X Pro. But Firefox (16.0.2) prints the pages (text plus images) as image. This makes it impossible to select text or use search feature.
I tested it with IE and Chrome. In both cases the created PDFs are as expected (texts can be selected).
I tried the solution outlined in the following links and none of them work.
http://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
https://support.mozilla.org/en-US/questions/809705?esab=a&as=aaq
I am using WIndows 7 OS. I don't assume it's bug. If it's a feature does anyone know how to disable it?
Thanks

If the printer (PDF printer settings) has an option to '''Embed fonts''' you can try selecting that. Another thing you could try is to print a sample from notepad. If it's okay you can try that font type for '''Serif''' in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Content%20panel Content] > '''Advanced''' (beside Fonts & Colors) > while deselecting '''Allow pages to choose their own fonts, ...''' and check.

Color issues while printing photos

I recently was able to successfully set up my iBook G4 wirelessly to my Windows-based Dell PC printer network (HP all-in-one printer). I've been printing documents and color banners etc. and everything looks great
I have also added my HP Photosmart 7660 to my G4 wireless printer list. However, when I go to print photos on glossy 4X6 paper, the colors are bright, but there is a red-ish filter over everything.
I had changed the cartridge just previously to printing with my iBook so I went back to the store and swapped cartridges thinking I may have gotten a bad one.
When I got home with the new one, I randomly tried printing a photo directly from my Dell and the colors were perfect. I tried again from my iBook and the colors were still wrong.
This led me to believe it was my computer and not the cartridge that was having issues printing the right colors. I looked in the Mac Help under colors + printing and saw some vague info on ColorSync and making sure your printer is set up correctly for it.
Does anyone have any light they can shed on the situation? Does it require downloading specefic software?
Thanks!

Howdy, Jesse,
Just a heads up - you might wanna check to see what driver you are using. Reason I say that is most host based printers are finnicky when it comes to networking (especially wireless) and typically they want to add to your printer list using Bonjour/Rendezvous or Appletalk. If you have added the printer as an IP printer, you may have it setup using a driver that is not designed for your printer (this may happen via Bonjour under some circumstances too). To check to see what driver your printer is using, go to the hard drive, then Applications>Utilities>Printer Setup Utility. Highlight your printer name then click Show Info and this info window should tell you the driver it is using. Also, you might want to check the printer manufacturer's website for a driver update - 10.4 is relatively new and the driver software you are using may be out of date. Or, you may want to setup the printer USB to yer Mac to rule out the network setup altogether. If everything looks on the up and up as far as the driver is concerned, you might wanna try a little bit of trial and error with varying the print settings. In the Print dialog box in iPhoto, go to Advanced Options, then click Copies & Pages and try to find the Quality and/or Color settings for your printer. Try varying color settings and also make sure that the proper media type you are using has been selected. Eventhough the printer is the same, remember that you are using different applications on completely different operating systems and this can definitely have an affect on the way color is interpreted.
Hope this sheds some light on the situation. Let me know how you make out.

Issue while Printing in PDF

Similar Messages

Maybe you are looking for