Issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.

I've encountered an issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.
The document and printer settings are set for A4 but the print job goes to the printer as A3.
The problem only occurs while printing through Adobe Photoshop CS6.

I get into trouble if I choose A4 borderless instead of A4 in the Photoshop Print settings.
There, Tray 2 is dimmed out
To be honest, I don't see borderless in your settings, but my doing that on my printer causes a default to the larger Tray 1.
That's all I have tonight. If I think of anything else, I'll post it. Here's thread on this issue as well.
Wrong paper size sent to the printer

Similar Messages

Issue while Printing Barcode

Hi All,
We have an issue while printing Barcode from SAp script.
We are using the barcode BC_C128B with font HELVE 10. We can see proper length of bar code
in print preview but when we take the print of the Bar code the dimensions of Bar code get doubled.
Could you please provide some expert inputs?
Thanks
Saurabh

Use SE73 and change the font in the barcode as per your requirement , if this barcode is used in any other programs then copy this barcode to Y or Z name and change according to your need and use it in your program
a®

Issue while deleting a row from a table

Dear friends,
i am getting an issue while deleting a row from a table, pls check screen shots , the first screen shot is my table contents
when i delete 2 row , the second row is deleting properly like below screen shot
but i want like below screen shot , Col1 contents should be like pic 1 . could any one pls let me know how to solve this issue.
Thanks
Vijaya

Hi vijaya,
please try this code, it will help you.
DATA : it_rows TYPE wdr_context_element_set,
          wa_rows LIKE LINE OF it_rows.
   DATA lo_nd_table TYPE REF TO if_wd_context_node.
    DATA lt_table TYPE wd_this->elements_table.
   DATA lo_el_table TYPE REF TO if_wd_context_element.
   DATA ls_vbap TYPE wd_this->element_table.
DATA: ld_index TYPE i.
data value TYPE sy-index.
* navigate from <CONTEXT> to <table> via lead selection
   lo_nd_table= wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
* get element via lead selection
* alternative access via index
* lo_el_table = lo_nd_table->get_element( index = 1 ).
* @TODO handle not set lead selection
   IF lo_el_table IS INITIAL.
   ENDIF.
* navigate from <CONTEXT> to <table> via lead selection
   lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
   lo_nd_table->get_static_attributes_table( IMPORTING table = lt_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
** @TODO compute values
** e.g. call a model function
* navigate from <CONTEXT> to <table> via lead selection
   lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
** @TODO compute values
** e.g. call a model function
it_rows = lo_nd_table>get_selected_elements( ).
   CALL METHOD lo_nd_table->GET_LEAD_SELECTION_INDEX
   RECEIVING
     INDEX = value .
LOOP AT it_rows INTO wa_rows.
     CALL METHOD wa_rows->get_static_attributes
       IMPORTING
              static_attributes = ls_table.
     READ TABLE lt_table INTO ls_table WITH KEY col1 = ls_table-col1.
      ld_index = value.
          ENDLOOP.
   CLEAR : ls_table-col2,
         ls_table-col2.
   MODIFY lt_table INDEX ld_index FROM ls_table.
lo_nd_table->bind_table( new_items = lt_table set_initial_elements = abap_true ).

While printing google map from FF4 its not displaying the map in the print out paper?

FF4 displaying the google map in my website. But while printing google map from FF4 its not displaying the map in the print out paper.
I chekced this FF 3.6 and there is no problem with this and other versions. FF4 having this problem.
What should I do for this? Please let me know.

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Facing issue while trying to disable automatic discovery of devices through Apple Bonjour

Hi All,
I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour.
Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's auto discovery technology( mdnsresponder ).
We are registering a particular service type by using DNS API "DNSServiceRegister". Service type is getting registered properly and we are able to discovered that particular type of device.
Platform: Windows 7.0 / MAC 10.8
Issue:
But we are facing issue while trying to disable auto discovery of a device programmatically. i.e, unregistered a service reference programmatically from our windows application.
To unregistered a service we are using "DNSServiceRefDeallocate" DNS API. But looks like it is not working properly.
Is this DNS API “DNSServiceRefDeallocate” is correct one to unregistered the service?
Here is the step by step procedure that we are following to de-allocate a service reference:
1.Browsing / Query a service by using service type to get service reference (DNSServiceRef).
2.Get reference socket FD by using DNS API "DNSServiceRefSockFD".
3.Select a socket by using "select" API.
4.Close the socket that we got from step 2 by closesocket().
5.Delete the service reference by using DNS API "DNSServiceRefDeallocate" and service reference from step 1.
Are we missing any step to unregistered a service?
Regards,
Goutam

Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.

Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

Hi all,
I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server. I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars. We want to take full advantage of OSX Server and to completly get off of exchange.
What are the best ways to do this? Are there any tools available to help this process?

I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Why a " # " is coming while printing chinese characters from SAP script?

Hi All,
Facing one issue.
We have a SAP script for printing delivery note thru T-code VL03N. The script has chinese characters in it.
When I print this form the chinese characters that are hardcoded in the script can be seen in the print out but the ones which are coming from the table cannot be seen instead they are repalced by " # ".
Strangely, when a debug the script or see a print preview on the screen they can be seen as it is with no problem.
Only when I print it, on the paper print they are seen as # but the characters that are hardcoded in the script can be seen clearly on paper.
Secondly, in Transaction FB03 which is for display of list of documents it too has some chinese characters and when I print this directly from the t-code doing Shift-F1 ( no SAP script or form is involved in this case) then the same case is there the chinese characters get replaced by a " # ".
Any inputs or views are welcome.
Please suggest.
Thanks.
Cordially,
Saurabh.

Hi,
You need to set your activate multibyte functions to support.
Long on to SAP --->right side right corner (Customized local layout) --> click --->Select options --->select tab (l18N)
-->Check Activate multibyefunctions to support.
log off you SAP Gui then re-log in...you can able to view multi language characters.
Thanks,
Nelson

Issues with printing PDF files from an ADOBE application

When printing PDF files from an Adobe application, some of the characters are lost and do not print. What can I do?

Please don't post the same question multiple times!

Issue while executing OS script from Oracle

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
=============================================================
Issue with Executing OS commands from Stored Procedure
============================================================

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

I'm having an issue on All ADOBE reader/flasher player opening window on Mac OSX Lion

I have tons of error when i'm openning Adobe reader/Adober flash player/Adobe application manager. When i went check out the Library/Adobe appiication support, it's missing and i can't get it to open. What are the solution to make this work. Cause i really wanna to download Adobe photoshop trial install and open it, but i keep on getting error all the time. What can i do to resolve this issue on my mac osx Lion 10.7.5 version? Any suggestion?

Could you try switching back to the PPAPI version of the plugin to see if that helps (reversing the steps outlined in the FAQ below)? From what we've learned, this only effects the NPAPI version and the PPAPI version should display fonts correctly.
Enable system Flash Player in Google Chrome | Windows | Mac
We are working with Google to get this fixed asap.
Thanks,
Chris

How to reset the network IP address from terminal/command line in Mac OSX?

Do anyone knows how to set the network IP address from terminal/command line in Mac OS X?

how about a GUI, ever heard of a GUI? it's this really neat thing, where you don't have to worry about remembering long strings of text to do something. Mac OS X actually has a rather decent one (that was sarcasm by the way, Mac is the best) you could have it done in like 30 sec, if you use the network pane of system preferences.

Ibase/Component issue while creating a message from satillite system

Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
Babu

Hi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand

Issue while submitting concurrent program from OAPage

Hi Team,
In OApage in One LOV field is der. From that LOV we need to select one concurrent program and click next button. while clicking on the next button i am getting error like below
The data that defines the flexfield on this field may be inconsistent.
Inform your system administrator that the segment referred to by the flexfield bind variable
:$FLEX$.PFCPA_JOB_NUMBER.ID:NULL could not be found.
Make sure this variable references the segment or value set name of a prior segment
in the flexfield structure. This flexfield bind variable is in either a WHERE clause in a table-validated value set,
or in a default value for one of the segments of this flexfield.
Please help me in this issue.
Thanks,
Rajashekar

Hi Team,
In OApage in One LOV field is der. From that LOV we need to select one concurrent program and click next button. while clicking on the next button i am getting error like below
The data that defines the flexfield on this field may be inconsistent.
Inform your system administrator that the segment referred to by the flexfield bind variable
:$FLEX$.PFCPA_JOB_NUMBER.ID:NULL could not be found.
Make sure this variable references the segment or value set name of a prior segment
in the flexfield structure. This flexfield bind variable is in either a WHERE clause in a table-validated value set,
or in a default value for one of the segments of this flexfield.
Please help me in this issue.
Thanks,
Rajashekar

Issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.

Similar Messages

Maybe you are looking for