Issue while published in HTTPS site

Issue raised when tried to publish the ROBOHELP files to HTTPS site. the Left pane TOC content didnt display. But there was no issues publishing to HTTP site. Can anyone guide me on this. I need this to be done immediately. Is there any security reason behind?

HTTP Test
IE 6, IE 8 and all browsers- working
HTTPS test
IE6, IE8- Not working
Firefox- Working
Find the attachment for reference.....

Similar Messages

Publish Error - An error occurred while publishing file "/Web/Sites/iWeb/X"

Hello everyone,
I've been using mac for about 10 years now and have finally decided to try out this iWeb application. Spent several hours putting the site together... fun... but when I hit the publish button, the following error popped up.
Publish Error
An error occurred while publishing file "/Web/Sites/iWeb/X". (X being my site name which also happens to be my .mac account name.
So I've spent another 3 hours trying it over and over again but still no luck. So I've searched this forum and see if there's any tips. Found a lot of solutions but none of them seem to help. I've deleted all the folders and file on my 'Sites' folder on the iDisk. Closed all running apps before hitting the 'Publish' button. And I've even deleted all my work and tried just to upload the 'welcome' page. Still doesn't work.
I'm getting a bit annoyed... Are there any solutions for my problem??
I'm using a PowerBook G4 12" 1.33GHz Mac OS X 10.4.9 with iWeb 1.1.2
Any help will be greatly appreciated! Thanks in advance!!
 88kin 
 PowerBook G4 12" 1.33GHz Mac OS X (10.4.9)

Probably not. No big deal, really. The important thing is we have been able to get your site on the .Mac server, albeit in the homepage directory.
Ok here's your last assignment. This will also take awhile, but when you are finished your site will be up on .Mac and accessible using the web.mac.com/username/iWeb/sitename url.
Since you have already initiated a publish to .Mac from iWeb, the root directory for iWeb should be on your iDisk. You should be able to navigate to the iWeb folder following this path:
Go/iDisk/MyiDisk/Web/Sites/iWeb/SiteFolder
"SiteFolder" should be a folder named for the site you are having trouble publishing.
On your desktop, open the Site folder that iWeb delivered when you published the original site using the Publish to a Folder... command. You will see a number of folders in there and a number of page.html files. Drag each of these into the Site Folder mentioned earlier, on the iDisk. (The one named for the site). The root index.html file, (the one published outside of the Site folder) needs to be placed in the Web/Sites folder; you should see it in the column above the iWeb folder when done. Basically, you are "manually" uploading your site. It's cumbersome and a royal pita, but if successful, this exercise will confirm what I have suspected all along:
The problem is a latency/time-out error. (The actual error message itself is misleading and somewhat immaterial--iWeb probably chose it randomly). Lots of things contribute to it, but basically, iWeb gets tired of waiting on the WebDav protocol and then generates an error message. I wish I could be more specific, but that's about as close as I can get to the core issue. Many folks publish successfully from your area of the world; just keep trying, and when all else fails, you can always swap out the changed files manually following the method outlined above.

IWEB An error occurred while publishing file "/Web/Sites/iWeb/t etc etc

An error occurred while publishing file “/Web/Sites/iWeb/testsite/workfiles/DSC04544.jpg”.
this is the message i get every bleeding time I try to update my page. anything I can do, or is it just the mac crew that have buggered up thier RUSHED update.
angry mac fan.

yes - I have just done it - I tried to publish again
and got the same error, but on a different file...
bummer - this is really fustrating
This problem has been floating for several days already. There was a previous forum 'iWeb Publishing Nightmare' which ran over 4,500 people participating in comments and sharing their problems. Many had proposed solutions ending with more frustration among MacUsers.
All I did was downgraded back to 1.0 and shall wait until a fix is at hand. Use your original installer and choose custom, then select iWeb only.
I use iWeb for my work particularly every hour ... uploading work to clients. So I can afford time wastage here. I don't use or need 'Comments' nor the extra 6 new templates. My entire site is running over 100 pages with several sites.
dreamery
http://web.mac.com/joeleong/iWeb/dreamery/home.html

An error occurred while publishing file "/Web/Sites/iWeb/Jim and Steph's Si

I'm guessing this is a common message most see when they try to publish their website. Reason I say this, is it is the only message I have recieved in the last week when trying to use this faulty software.
Here it is again if you missed it:
An error occurred while publishing file “/Web/Sites/iWeb/Jim and Steph's Site/Jim's Blog”.
I got this MacBook week ago yesterday. Totally excited to share pictures and blog information. Spent 99 dollars or close to it for a mac account to simply share this information on the web. The first four pages (all pictures), I published worked well. Then I updated to iWeb 1.1.1 and tried to publish with blogs and more pictures and it won't work. Now all that I published before does not even come up. I emailed support here on mac.com and got the generic reply that I have already read on this forum. I tired as many fixes as I could to no avail. Two questions:
1. Any ideas to fix this problem?
2. Can you get your money back?
Sorry this was so long.
Thanks everyone,
Jim B

Jim...
Try doing a "Publish All to .Mac" if nothing else works for you. And if I could make a recommendation, it probably wouldn't be a bad thing to simplify your site name (Jim and Steph's Site) and eliminate the apostrophes (also in Jim's Blog). A longer site URL with complexities such as punctuation and spaces and even capitalization can potentially wreak havoc on your site navigation and function. Simplifying your site and page names will at the very least lead to shorter and more recognizable URLs...and when you start to add more pages it will also make the navigation menu at the top of your pages look "cleaner". Think simple names, like "oursite" and "HeSays" or "SheSays"
Just a suggestion.

An error occurred while publishing file "/Web/Sites". Try publishing again

Any ideas - I have been getting this since the move to ME. Systems logs on to Mac.com then immediately comes up with this error - An error occurred while publishing file “/Web/Sites”. Try publishing again later.

I hope that you're now able to publish?
Unfortunately I'm not.. and I'm really getting fed up. I'm first to admit I'm technologically-challenged (which is why I prefer Apple to PCs because they're far more user friendly) but I've tried the things I've seen mentioned in other threads.. such as ensuring the .me update has been done, successfully published to a folder, etc.. When I publish (I only have the 'publish to mac', not 'publish to me' option) the creating log bar progressed to the half way mark before disappearing. Suddenly another box pops up to say that my site will begin publishing. It doesn't. Instead 'iweb unexpectedly quit'. It doesn't make a difference whether I've published to mac, published all to mac or simply clicked the publish button on the bottom left. While 'creating' the buttons turn blue but once it quits and I re-open/relaunch they're back to being red. As I am unable to get through to the online chat support (several unanswered messages and now it's completely unaccessible) I'm hoping someone else can suggest what I try next. It's been almost 2 weeks and I love iweb but am at the point of wanting to cancel my membership. Help!
Signed,
Computer Illiterate

Getting issue while publishing the app studio

getting issue while publishing the app studio
error reported is The installable package was not created because the code generation failed.

touchdevelop qcxhb
& Jumping Lion is the name of the app.
is this the information you are looking
in source code it is showing the error as
Error downloading TouchDevelop package for script id 'qcxhb'. Reason: Errors in gamepad->game
not sure if this can help

Issues with publishing my iWeb site to .MAC - Progress bar freezes at 100%

Well, as topic says, i'm having troubles publishing my iWeb site to .MAC now since upgrading to '08. The progress bar reaches full circle, but then nothing. Left it uploading to .Mac for well over 2 hours one time while out of the house...nada. Sometimes i get an error message, sometimes not and have to close iWeb while it's still publishing.
Any feedback regarding this?
Thanks in advance.
/Rich

Update: After 36 hours, I have successfully managed to upload my entire website via the "Publish All to .Mac" option. I now have blue indicators on the left side of my iWeb program in place of those pesky red ones. How did I do it? Well, I'm not sure. But on my last attempt I looked at the problem from a different perspective, so I took an alternate approach. I had a feeling that I was experiencing a network timeout issue caused by a 3rd party software, so I created a Whitelist entry on my website filtering software that allows unlimited access to "idisk.mac.com";; and "web.mac.com";; domains. I've got two kids at home, so I'm running the free OpenDNS Dashboard service on my network which provides content filtering (blocks adult site, phishing site, etc..). I started using this service two weeks ago. My last website update was a week before that. I figured I had nothing to loose by trying. To my surprise, it worked. Now, it took almost two hours to publish, of which the pie indicator was in the "filled" position for a nerve racking hour. To reconfirm, I then made a minor change to one of the pages on my website and re-published. This time using the "Publish to .Mac" option in place of the ALL option and once again it worked. It took less than 5 minutes. Now, I'm not sure if this is a coincidence, maybe Apple fixed the problem, or maybe my website filtering service was causing some type of time out issue all along?? Don't know.. But at least for now, I'm a happy camper since I have my site up.

Sharepoint 2013 site having NTML Crawl issue while crawling Sharepoint 2010 sites having FBA authentication

Hi,
We have Sharepoint 2013 search center site which is claim based with NTLM authentication set. we have Sharepoint 2010 farm also running which are FBA authenticated.
While crawling Sharepoint 2010 sites having FBA authentication from SP 2013 search center having NTLM auth. it does not give proper result.
Can you please help me what can be done here?
Thanks,
Prashant

Hi Prashant,
According to your description, my understanding is that the search cannot work correctly when crawling the SharePoint site which is form-based authentication.
Per my knowledge, the crawl component requires NTLM to access content. At least one zone must be configured to use NTLM authentication. If NTLM authentication is not configured on the default zone, the crawl component can use a different
zone that is configured to use NTLM authentication.
However, if crawling a non-default zone of the web application, URLs of results will always be relative to the non-default zone that was crawled for queries from any zone, and this can cause unexpected or problematic behavior.
I recommend to make sure that the default zone of the SharePoint 2010 web application to use NTLM authentication.
More references:
http://technet.microsoft.com/en-us/library/dn535606(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc262350.aspx#planzone
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Issue while accessing the SharePoint site - SharePoint 2010 - after Password update

SharePoint site is working until we update the password(as it is expiring, we have created a new password) .
We have updated the password in central admin.
After password update, getting the below
error.
Exception
Details: System.InvalidOperationException: Operation is not valid due to the
current state of the object.
[InvalidOperationException: Operation is not
valid due to the current state of the object.]
Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext
context) +26890024
Microsoft.SharePoint.Utilities.SPUtility.DetermineLayoutsUrl(SPWeb overrideWeb,
HttpContext context, Boolean includeLCID, Boolean doNotInitWeb) +252
Microsoft.SharePoint.Utilities.SPUtility.DetermineRedirectUrl(String
urlProposed, SPRedirectFlags flags, HttpContext context, SPWeb overrideWeb,
String queryString, String& urlRedirect) +616
Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags
flags, HttpContext context, String queryString) +98
Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(HttpContext context)
+1077
Microsoft.SharePoint.IdentityModel.SPFederationAuthenticationModule.OnEndRequest(Object
sender, EventArgs args) +693
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step,
Boolean& completedSynchronously)
+171
We have gone through different articles and did below steps but there is no resolution for us
1) Verified all the SharePoint services in central admin and configured the updated service account to all the services.
2) Removed the SharePoint content DB and attached it again.
Could you please provide any pointers?
Marulasiddappa SB (Swamy)

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

Interspersed screen Issue while publishing the file in captivate

I have noticed some images/backgrounds in published file overlapping with images in previous frames (Interspersed screen).
It always happens when we publish the captivate file more than once. How can it be avoided.
Following are the details I think may be helpful in resolving this issue:
Captivate Version - CS6
Flash Player - 10
Operating System - Win7
Thanks in Advance for your help.

Try changing the slide quality if it is still Low to Optimized (now default in 6.1).
When publishing: uncheck Advanced compression, and check Force republishing

Publish error: An error occurred while publishing file...

Hi,
Just installed iWeb08 on my computer. When I try to publish to .Mac I get this error:
"*Publish error: An error occurred while publishing file "/Web/Sites". Try publishing again later*."
This is the link to the screenshot of that message:
http://www.xHarbour.net/publisherror.png
I also tried it with a new (Free trial) .mac account, but get the same error. Also tried with a fresh new web site, but still error. Also tried to delete my Domain.sites2 files and start fresh, but still the publish error.
Also tried "Publish all to .mac", but same error.
When I go to my "System preferences" -> ".Mac" I need to enter my password to login, this works. So my password works ok on my .Mac account.
Publish to a Folder works without a problem.
Is this a known issue? *What can I do to fix this?*
Thanks!
Sincerely,
Patrick Mast,
http://www.WinFakt.be
http://www.xHarbour.com

Yep. File/Publish all to .Mac.
Don't mean to sound like a smart @ss, but that's really the solution here. It's the weekend and everybody is updating their sites. I've really come to believe that this is probably part of the problem.
If you like, you can review my Publish Errors Page for a review of Apple tech notes and other user's experiences with this type of problem.
Bottom line is....redial, redial, redial. (I think...!)
-Mark

An error occurred while publishing

I get this error again and again...
"An error occurred while publishing file “/Web/Sites/Blog/Blog/Entries”. Try publishing again later"
And I have no clue what is going on..

I had this same problem, due to the recent update of iWeb. The publish dialog said to "publish all" which I did. But it kept giving me this error, sometimes the same file and sometimes different.
This support document:
http://docs.info.apple.com/article.html?artnum=303353
says to keep trying. Which I did. All day and part of the night, too. Finally, after about twenty attempts, at about 10:30 p.m., it worked! Maybe it really is a network problem caused (in my case) by everyone having to republish their whole site due to the recent iWeb update?
iMac G4/800 Mac OS X (10.4)

Problem while publishing the models - it is taking much time

Hi,
I am facing one issue while publishing the models.Previously when Re-publishing the models in Configurator processing pending publications usually took 3 to 5 minutes per model. Currently it is taking 15-20 minutes per model to process. Please suggest me the possiblities to identify the root cause of the issue.
Thanks in advance.
Regards,
Purushoth

You'll probably want to gather a trace for the Process a Single Publication concurrent request. You can turn this on by selecting ' enable trace' on the program definition. You'll need your dba to review the trace to identify which parts of the program are taking the longest.
If you haven't run CZ Purge for awhile, try running it. Also find out how often stats are gathered for the CZ schema.
Thanks,
Jason

The Specified name is already in use while activating Publishing feature at site collection level in Moss2007

Hi,
Please suggest on this "The Specified name is already in use while activating Publishing feature at site collection level in Moss2007"
The specified name is already in use.
A list, survey, discussion board, or document library cannot have the same name as another list, survey, discussion board, or document library in this Web site. Use your browser's Back button, and type a new name. at Microsoft.SharePoint.Library.SPRequestInternalClass.CreateList(String
bstrWebUrl, String bstrTitle, String bstrDescription, String bstrListUrl, String bstrFeatureId, Int32 lTemplateID, String bstrDocTemplateType, ListQuickLaunchOptions qlOpt)
at Microsoft.SharePoint.Library.SPRequest.CreateList(String bstrWebUrl, String bstrTitle, String bstrDescription, String bstrListUrl, String bstrFeatureId, Int32 lTemplateID, String bstrDocTemplateType, ListQuickLaunchOptions qlOpt)

there are some OutBox list/libraries being created when you activate publishing features, make sure those names not being used: check this post for more detail..
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f7e93d26-c2a1-42c2-b191-dc48f734684b/the-specified-name-is-already-in-use-error?forum=sharepointgenerallegacy
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Site Issues while viewing on I.E. 7

Hi everyone,
I have finally finished designing our site www.lucentads.com,
checked for browser compatibilities with no issues. I view the site
from my Mac on Safari and FireFox with no problems but while using
a Windows based machine running on Vista & I.E. 7 the site is
viewed with bunch of problem. Specifically top lines of each table
are cut off... I check on Dreamweaver and there seems to be plenty
of space between the tables, so not sure how to approach this
problem.
Your time and suggestions are appreciated in advance.
Thank you,
Edmund

Actually, the problem is here -
p {
margin-top: -15px;
font-family: Verdana, Arial, Helvetica, sans-serif;
font-size: 12px;
font-weight: normal;
line-height: 1.75em;
text-align: justify;
Get rid of that negative top margin.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Edmund Karam" <[email protected]> wrote in
message
news:fsb7nn$slg$[email protected]..
> Hi everyone,
>
> I have finally finished designing our site
www.lucentads.com, checked for
> browser compatibilities with no issues. I view the site
from my Mac on
> Safari
> and FireFox with no problems but while using a Windows
based machine
> running on
> Vista & I.E. 7 the site is viewed with bunch of
problem. Specifically top
> lines of each table are cut off... I check on
Dreamweaver and there seems
> to be
> plenty of space between the tables, so not sure how to
approach this
> problem.
>
> Your time and suggestions are appreciated in advance.
>
> Thank you,
>
> Edmund
>

Issue while published in HTTPS site

Similar Messages

Maybe you are looking for