Issue while redefining BEx query in NW Gateway
Hi Friends,
I am trying to redefine a BEx query in Netweaver Gateway system using SEGW transaction, and MDX query option. I am getting the following error after step 2 (step 1 is selecting the catalog and query name, and step 2 is assigning model/service name) :
Could not retrieve the Model Name 'Z_ODATASERVICE_2_MDL' and Version '0001'
I have already created one test odata service by redefining another query from the same system, but I was able to do it successfully. Any help on the error would be appreciated !
Hi Juhi,
I am facing the same issue. BW query has three input parameters i.e. Year, Month and Profit center.
I can create the service when query has only one input parameter i.e. Year. But when query has more parameter other than year, I cant create the service. Getting an error 'Association AZPROFIT_CToListOfValues: referential constraint property not found in entity ZMFIGL_ZFIGL_COST_FINAL_FIORIParameter.'
As per your last reply, if we have multiple input parameters then it does not allow to create the service from BEX query. How did you resolve this issue. Please provide some details.
Thanks in Advance.
Abhishek.
Similar Messages
-
Issue while importing bex query into BO
Hi EXperts,
I am using Bo xi 3.1 sp3 i am facing the issue while building the universe with bex query iam getting the following error "Error getting measures for cube (cube name(0QM_C09_Q003)),It is giving this error, i resolved this error by check cumultave property in th measures,is it right to do like this or is there any other way to resolve the issue.
Regards
SurajHi Juhi,
I am facing the same issue. BW query has three input parameters i.e. Year, Month and Profit center.
I can create the service when query has only one input parameter i.e. Year. But when query has more parameter other than year, I cant create the service. Getting an error 'Association AZPROFIT_CToListOfValues: referential constraint property not found in entity ZMFIGL_ZFIGL_COST_FINAL_FIORIParameter.'
As per your last reply, if we have multiple input parameters then it does not allow to create the service from BEX query. How did you resolve this issue. Please provide some details.
Thanks in Advance.
Abhishek. -
Error while integrating BEx Query with Cognos
Hi all,
we have made 999 rows and 150 columns..
but we r unable to integrate it with cognos if we remove free characteristics....
and it thows me the following error
1.BAP-ERR-0002 a BAPI error has occured in the function module RFC_READ_TABLE. NOT_AUTHORIZED
2.error when generating data provider
3.Query is too large
Please do reply immediately with the correct solution
Regards
MadhaviHi Vani Reddy
Jus one quick finding are there any new patches upgrade taken place in your system . its in generally occurs because patch issues please refer the following note 1325527.
it may helps you in this reg.
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
vani reddy wrote:
> Hi All,
>
> While executing Bex Query user is getting below error message after 20 mins and coming out of BEx.
>
>
>
> Error Group
>
> RFC_ERROR_SYSTEM_FAILURE
>
> Message
>
> An exception that could not be cought occured.
>
> Thanks in advance
> Vani
Edited by: K M R on Aug 12, 2009 2:14 PM -
Giving Error while opening BEx Query Designer.
Hi all,
A user is trying to open BEx Query Designer 7.0 and she is getting this error
" SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were middle of something, the information you are working on might be lost. "
She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now.
As a first re-solution i told her to get it re-installed but still she is getting the same issue.
Thanx.Hello,
There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
My suggestion is.
If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
After that, download the latest patch available and install:
http://service.sap.com/swdc
> Support Packages and Patches
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Win32
_ > * gui720_5-10007878.exe
| > BI ADDON FOR SAP GUI
| > BI 7.0 ADDON FOR SAP GUI 7.20
|_ > * bi720sp03p_301-20006596.exe
|
| > BI ADDON FOR SAP GUI
| > BW 3.5 ADDON FOR SAP GUI 7.20
| > Win32
|_ > bw350gui720_5-20006857.exe
If persist, let me know.
Cheers
Edward John -
Performance Issue Executing a BEx Query in Crystal Report E 4.0
Dear Forum
I'm working for a customer with big performance issue Executing a BEx Query in Crystal via transient universe.
When query is executed directly against BW via RSRT query returns results in under 2 seconds.
When executed in crystal, without the use of subreports multiple executions (calls to BICS_GET_RESULTS) are seen. Runtimes are as long as 60 seconds.
The Bex query is based on a multiprovider without ODS.
The RFC trace shows BICS connection problems, CS as BICS_PROV_GET_INITIAL_STATE takes a lot of time.
I checked the note 1399816 - Task name - prefix - RSDRP_EXECUTE_AT_QUERY_DISP, and itu2019s not applicable because the customer has the BI 7.01 SP 8 and it has already
domain RSDR0_TASKNAME_LONG in package RSDRC with the
description: 'BW Data Manager: Task name - 32 characters', data
type: CHAR; No. Characters: 32, decimal digits: 0
data element RSDR0_TASKNAME_LONG in package RSDRC with the
description 'BW Data Manager: Task name - 32 characters' and the
previously created domain.
as described on the message
Could you suggest me something to check, please?
Thanks en advance
Regards
RosaHi,
It would be great if you would quote the ADAPT and tell the audience when it is targetted for a fix.
Generally speaking, CR for Enteprise isn't as performant as WebI, because uptake was rather slow .. so i'm of the opinion that there is improvements to be gained. So please work with Support via OSS.
My onlt recommendations can be :
- Patch up to P2.12 in bi 4.0
- Define more default values on the Bex query variables.
- Implement this note in the BW 1593802 Performance optimization when loading query views
Regards,
H -
Problem while opening Bex query on the web
Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SVHello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help. -
Issue While executing the Query for Pagination using ROWNUM with like
Issue While executing the Query for Pagination using ROWNUM with like.
Database is Oracle11G.
Oracle Database Table contains 8-9 lakh records
1) SQL equal (=)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920'
Execution Time:- 0.00869245 seconds
Returns 2 resultsets
2) SQL like (one %)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920%'
Execution Time:- 0.01094301 seconds
Returns 2 resultsets
3) SQL like (two%)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE like '%KMF22600920%'
Execution Time:- 6.43989658 seconds
Returns 2 resultsets
In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
4) SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
Execution Time:- Infinite
ResultSets:- No as execution time is infinite
a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
Could you please let us know what is the issue with two % used in like and rownum
5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
Execution Time:- 7.41368914 seconds
Returns 2 resultsets
Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.
-
Error while executing BEx Query on Composite Provider
Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
FedericoHe's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections. -
MDX Error in WebI while running Bex Query
Dear Experts,
In my System BO XI R3.1 Enterprise and Integration kit For SAP has installed.
While creating query with Efashion and MS Acess files query is running fine.
But in case of BI queries(InfoCube or BEx Query) it is giving "Select Dimension 1 CrossJoin Dimension2...."Error(10901).
Test Connection of BI (The server is responding)is working fine.
How to solve the issue?
Thanks in Advance
Venkat PHi Venkat,
Obviously there is something wrong with your query.
What happens if you parse the MDX using the BW transaction MDXTEST - does it work ok?
You need to try and identify at what point the query is failing, i.e. is it caused at the BW layer or is it a problem at the XI3.1 application layer...?
I hope this is a very helpful answer to you.
Kind regards,
John -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
ERROR while excecuting BEx query
Hi Friends,
I executed a Bex query and error is displayed Page not Found while connecting.I am using a Remote desktop.
Can you please let me know how can i correct the error.
Appreciate your help
Thanks
SahasraHi Sahasra,
Can you provide more details about your issue. At the same time you can check the following points.
1. When you are executing the query, does it ask for your SAP user ID and password.
2. You can check the link on your webpage, whether its referring to the correct query. Query name will be there on URL.
3. There could be a connection issue, check with you basis team.
Thanks,
Sachin -
Error while executing BEx query made on Multiprovider having Virtual cube
Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajayHi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree. -
Issue while installing idm 8.1.1 gateway on 64 bit windows 2008 R2
Hi
We have issue in installing idm 8.1.1 gateway on 64 bit windows 2008 R2
C:\Program Files (x86)\IDM\gateway>gateway -i
An error occured while trying to install the service: Input/output error
Sun notes: if you're running 64-bit Windows 2008, you need the JDKTM Version 6 Update 12 and later.
But this java version should be there in Gateway server(windows 2008) or idm installed server?
We don't have java installed on gateway server. is this causing issue?
please let us know
ThanksI may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it.
Edited by: user12611524 on May 2, 2011 5:11 PM -
Getting Java error while connect BEx query to WebI report (SAP BI4.0 )
Not able to connect BEx query to WebI report (SAP BI4.0 ) . Below is the error I get while creating a new BEx connection to BOBJ WebI report .
Please find the below error and help me ,
"Select a BW Bex query window box " displayed "Nothing to display " and server error as mentioned below
Java.uti.concurrent.executionException: Com.sap.sl.sdk.repository.service.repositor******
at Java.uti.concurrent.futuretask (Unknown source )
at java.swing.swing.timer.fireactionperformed(Unknown source )
at java.awt.event.invocationEvent.dispatch(Unknown Source)
Thanks ,
Pradeep GorpaduHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Hi Mates,
Throught webi if i try to connect to a bex query im getting the attached error message, any idea what to do..
2 days back im able to connect to bex query frm webi..frm yesterday its not happening
regards,
mahihi Ray,
Bex query is checked , and pwd is also fine, but i think java need to be updated in my pc
and im getting the below errrors while opening webi in BI launch pad.........any idea
Maybe you are looking for
-
I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive an
-
I am looking for some feedback/recommendations for good saxophone sounds for Logic. I am currently doing arrangements for a saxophone ensemble and need to produce good quality demos. The sounds that come with Logic are not very good. Can someone poin
-
Old confirmations are not visible after user ID is recreated
Hello All, We had an user which was recreated and the old user ID was deleted. But the old userID had some open confirmations in it. We have changed the GUID of the old user with the new user GUID. So though we can view all shopping carts for the use
-
Foreign key dependency checking
Dear all: I have a question about foreign key checking. Let's say I have two Z table, one is master table and one is transaction table. The master table contains a primary key named CustNo. The transaction table have two primary keys named CustNo and
-
Freezing at Startup, Help!
Well it seems my MBPro 17" is completely frozen now at the... startup sreen? This has happened four times already and every time I've had to reinstall OSX. I'm posting now because I swear my lappytop will lose it's screen if I have to reinstall it on