Issue while synchronizing company address in SCUG

Hello All,
I wish everyone is fine. Before starting the thread i already did a search on my issue however i was not successful.
I am in the process of configuring CUA within a SAP instance with two different clients ( central and child).
Logical system name creation, assgnment, rfc's , system user, model view are in place with no errors.
Already ran the report RSADRCK2.
Now the issue i am facing is.
when i click on the button copy from child system i am getting the following error.
DEFAULT_COMPANY Error when saving company address data
DEFAULT_COMPANY 010AMAddress doesn't exist 23016.
I have checked the table USADDEF in central and child client.
The Address number is different in both clients.
Please let me know how i can maintain the address number 23016 to the sap standard company address in the table USADDEF without going for the developer keys.
Any alternative solution.
Require guidance from experts!!!
Thanks and Regards
Madhu

Similar Messages

Problem Synchronizing Company Address in SCUG

Sorry, I'm not sure which forum I should post this message in but I'm in the process of implementing CUA in our clients and am trying to synchronize the Company address in the clients, but I get an error without any helpful information. I do notice that the clients in which I'm having a problem synchronizing have a different layout for company address. For instance, the central system's layout uses Country and Region in SUCOMP whereas the client in which I'm having problems synchronizing uses Country/City/State/and ZIP. The only error indicator I get is the red box with an "@5C@". I have been searching for solutions without much luck. Is this because the address layout is different (although the sync was successful in another client that had a different layout) or is it likely something else?

>
Chanda Barrick wrote:
> Sorry, I'm not sure which forum I should post this message in but I'm in the process of implementing CUA in our clients and am trying to synchronize the Company address in the clients, but I get an error without any helpful information. I do notice that the clients in which I'm having a problem synchronizing have a different layout for company address. For instance, the central system's layout uses Country and Region in SUCOMP whereas the client in which I'm having problems synchronizing uses Country/City/State/and ZIP. The only error indicator I get is the red box with an "@5C@". I have been searching for solutions without much luck. Is this because the address layout is different (although the sync was successful in another client that had a different layout) or is it likely something else?
Since you haven't received any replies, let me give this a shot.
What happens when you run SCUG on parent CUA and select child CUA system and click on "Company Addresses"? Do you at least get a "Sychronization of the Company Address" list. Please reply/post with "Overview" output.
John N.

Internal error - NUMBER_GET_NEXT call error while craeating new company address

Dear Team,
In solution manager while we going to create company address through tcode SUCOMP and during saving the record error message occur as "Internal error -NUMBER_GET_NEXT call error".
Please suggest for solution
Regards,
Ajay

Dear Mr. Rafikul,
There is no ABAP dump but in SM21 there are error message:-
"Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message E0 022
EDI: Error process code '&' is not available
&CAUSE&
A syntax error was identified while processing an inbound
<DS:GlOS.IDoc>IDoc. There is no entry with the key &v1& in 'Error
process codes'. However, this process code was determined from the
table of status values (TEDS1).
&WHAT_TO_DO&
Please check the 'Error process codes'.
IF &DEVICE&='SCREEN'
<DS:TRAN.WE40>Execute function
ENDIF
One document format shows more"
Now my one of problem solved. When i have go to SU01 and checked in address tab, its work now. Earlier its was not work.May be executed the report Z_OSSNOTE_445575 in system, its should be working. Thanks for your answer.
But till m facing in SUCOMP for creating company address.
Regards,
Ajay Asawa

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

PGI Issue while creating outbound delivery.

Hello All,
I am facing a strange issue while doing PGI .The system gives the message as shown below ,although we have maintained Posting Periods in both MMPV and OB52. Please help on this issue.
Posting only possible in periods 2011/07 and 2011/06 in companlly code 1000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022
Regards
Deepak

Hi Deepak,
1-Please close all the login of the user logged in.
2-Goto SU01,put the required user ID and click on for change mode.After this goto "Parameters" Tab.
3-Add parameter Id="MMPI_READ_NOTE".It will read the SAP Note 487381 and allow you to initialize.
4-In the parameter value,put the current date and then save
5-Now goto MMPI and put the date=05.07.2011 or in period you can put 1 and fiscal year=2011 for the respective company code and execute.This will open the July Month of 2011.Hence will allow the posting on 05.07.2011
6-Now check in MMRV,it will show fro the respective company code,the current period will be 01....2011 and previous Period=12...2010.
7-Now do all the activities for july 2011 month.
8-After July close the period through MMPV and it will automatically open for Aug month i.e 06..2011 period
please try to check based on the above steps
Revert with your result
Regards,
Prasanna

WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

Sir,
ply let me know after saving the po i want to know what all messages were issued while creating the po.
Like "warning" or "information" message
where can i see this
regards
amey

Hi,
PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
Here are few message type:
Contract has different purchasing organization &     W
Validity period of contract does not start until &     W
Validity period of contract expired on &     W
Target value of contract & exceeded by & &     W
Net price for item & taken from conditions     W
Purchase requisition & item & already deleted     W
Scheduled quantity & & greater than target quantity & &     W
Quantity smaller than invoiced quantity &     W
Target quantity exceeded by & &     W
Not possible to determine a consumption account     W
Release date lies in the past     W
Base unit of measure & adopted from material master record
Release date: next workday is &     W
Contract target value & reached     W
Please only use plants with company code &
Order unit copied from material master record     W
Hope it helps.
Utsav..

Issue in Inter Company postings

Hi All,
Currently I face an issue with inter-company posting transaction. Let me explain the issue.
Using FB01 we can create inter-company postings by giving G/l and New Company code fields in the first screen. Let us say there are two company codes 0020,0040.
Giving these company codes and their corresponding G/ls in FB01 system creates 2 documents, one in each company code i.e, one document in 0020 and another document 0040. There will also be a link in the field Cross-CC no which says this is an inter-company transaction.
Following are my questions.
1.Can I create the INTER-COMPANY Postings using BAPI_ACC_DOCUMENT_POST ? We can create accounting documents in both company codes 0020,0040 using this BAPI. But these two are becoming independent entries in each company code without any link ( Like the above case Cross_CC no) between them.
2.My another requirement is that I have to give an error message to user inside a user-exit while validating data. If I give message type E inside the user-exit it is giving the message but the normal flow is halted. It is going out with a blank screen with error message and the transaction is not going further. Is it possible to give error messages inside a user-exit without obstructing the normal flow of any transaction? The transaction can also be executed in Background.
Thanks for your help.
Vinod.

For question one I'm interested in doing the same thing.
Did you get an answer on how to do INTER-COMPANY postings using this BAPI?
BR and many thanks in advance.
Mattias

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

How to modify the contact persons company address changes

Hi Friends,
My requirement is i want to update the address of the contact person in relationships. Actually when we are maintaining the relationships it is automatically taking the Accounts address in company address field but i wants to maintain the different address for each contact person related to the particular account for that i used Bapi_bupa_contp_addr_change functions module as well as Bapi Transaction Commit also but it is not helpful.
       I want to change the contact persons address as per flat file, so please let me is there any fuction module for changing the address of a contactt person in relationships.
Regards
Kumar

Hi Kumar,
could you solution this issue?
I use this FM, I cna Insert new telephones por relationship but, I can't delete and update.
Can U help me? my code:
data : i_bapiadtel like BAPIADTEL occurs 0 with header line,
       i_bapiadtel_x like BAPIADTELX occurs 0 with header line,
       i_return LIKE bapiret2 OCCURS 0 with header line.
i_bapiadtel-telephone = '937102020'.
i_bapiadtel-std_no = 'X'.
APPEND i_bapiadtel.
i_bapiadtel_x-telephone = 'X'.
i_bapiadtel_x-std_no = 'X'.
i_bapiadtel_x-updateflag = 'D'.
APPEND i_bapiadtel_x.
CALL FUNCTION 'BAPI_BUPR_CONTP_ADDR_CHANGE'
EXPORTING
    businesspartner = '0020034745'
    contactperson   = '0090004124'
TABLES
    bapiadtel       = i_bapiadtel
    bapiadtel_x     = i_bapiadtel_x
    return          = i_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = 'X'.
Thanks in advance.
Sergio

Exception while synchronizing via STACK ABAP

Hi,
We are syncronizing via stack ABAP. We use the service:
http://sapdesa.iberdrola.es:8030/sap/bc/MJC/mi_host
But the syncronization finishes whit this error message:
Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Server returned HTTP response code: 500 for URL: http://sapdesa.iberdrola.es:8030/sap/bc/MJC/mi_host?sysid=MD1&client=099&~language=es&ACKNOWLEDGE=X&))
After some syncronizations more , the process finishes succesfully.
Has anybody idea why it's happening?

Hi Satur,
The following thread should solve your problem
Re: Sync issue: "server returned http response code: 500 for URL"
Best Regards,
Karthik

Facing issue while trying to disable automatic discovery of devices through Apple Bonjour

Hi All,
I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour.
Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's auto discovery technology( mdnsresponder ).
We are registering a particular service type by using DNS API "DNSServiceRegister". Service type is getting registered properly and we are able to discovered that particular type of device.
Platform: Windows 7.0 / MAC 10.8
Issue:
But we are facing issue while trying to disable auto discovery of a device programmatically. i.e, unregistered a service reference programmatically from our windows application.
To unregistered a service we are using "DNSServiceRefDeallocate" DNS API. But looks like it is not working properly.
Is this DNS API “DNSServiceRefDeallocate” is correct one to unregistered the service?
Here is the step by step procedure that we are following to de-allocate a service reference:
1.Browsing / Query a service by using service type to get service reference (DNSServiceRef).
2.Get reference socket FD by using DNS API "DNSServiceRefSockFD".
3.Select a socket by using "select" API.
4.Close the socket that we got from step 2 by closesocket().
5.Delete the service reference by using DNS API "DNSServiceRefDeallocate" and service reference from step 1.
Are we missing any step to unregistered a service?
Regards,
Goutam

Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.

Company Address deleted when update job fails

Hey guys,
Last night we had an issue with a development system, because of this our IdM wasn't able to run it's nightly update job.
Now before I noticed this in the morning I had an urgent request to create a user but I couldn't create the user because I couldn't find the company address.
Had a look in IdM noticed the update job going wrong, ran it manually and out of the blue (or out of the development system) the company address is back.
Only problem: every single user now does not have a company address assigned to him/her.
So my question is: how is it possible that an update job failing is a reason for idM to remove a company address?
We've had issues where users didn't have a company address before and it gave all types of strange behavior so I'm not looking forward to that type of situation again.

Hi Srinivas S,
Create the new recurring instances of those reports which having issue. and then check
it will resolve your issue.
Regards,
Anish

Issue while filling Inventory setup tables.

Hi,
Here we are facing a critical issue, while filling Inventory setup tables, we have done BX setup successfully. Not able complete BF and UM because of performance issues.
We filled 40% of BF and UM, since we dont have system downtime and stoped the setup at that movement. Shall we do BF & UM setup without R/3 system downtime. Is there any other way we can fill the BF, UM setup tables.
Your help is really appreaciated.
Thanks
BK

Hi BK,
Ideally you need the downtime when doing the setup for current and previous period as these are the only open ones where you can expect changes to happen due to user postings. What selection did you give when doing the set up? One idea is to break up the set up job so that each job loads for a week and then run the jobs in parallel. This would work for BF and then for UM of course you need to run it per company code. Are you using on ODS in your data model?

Golive CS2 crashing with SFTP while synchronizing with server

I'm using latest Update Golive CS2 (8.01) with SFTP.
Sometimes Golive crashes while synchronizing with the server (publish-server -> Synchronize all; Sorry, can't remember the correct english context menue entry because i'm runnig german version).
The error message box says:
"Microsoft Visual C++ Runtime Library
Buffer overrun detected
Program: P:\Adobe\Adobe Golive CS2\GoLive.exe
An buffer overrun has been detected which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated."
If i use FTP, all is running fine.
Deleting the Golive preferences did not result in any effort.
On these servers runnig SFTP i cannot switch back to FTP because of privacy/confidentional reasons.

I started having this exact same problem yesterday. I never had it before and nothing had changed on my system prior to the problem starting (no Windows updates, or others). Mine is also GoLive CS2. I have used it every since I purchased it direct from Adobe while it was still the "current version". And likewise, it happens when using SFTP for transfer.
Thinking maybe a program file had become corrupted, I ran the installation over and selected "repair". It completed without issue. And I reactivated without any problem. But the issue still exists.
Interestingly, certain files trigger it every time while it seems random otherwise. One file that will do it every time is a small gif image in one site. I recreated that image from scratch and it still does it.

Issue while synchronizing company address in SCUG

Similar Messages

Maybe you are looking for