Issue while updating iPhone 3GS to iOS6

i updated iPhone 3gs to iOS6 through iTunes. Now when i am trying to activate, it is not connecting to iTunes. iTunes showing error.

We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care.
getting error from iTunes

Similar Messages

  • Updated iPhone 3GS to iOS6 and lost all contacts

    I updated my iPhone 3GS to the new iOS6 yesterday. It took a while, but everything worked just fine. Today, I tried to do the same to my husband's phone, which is identical to mine. It extracted, but then would not restore. I see the apps that were removed from his phone, as well as the music, in iTunes; but all of his contacts are gone. I've tried every suggestion I can find online, and nothing is helping me locate them. When I right-click on his phone under the Devices header, the drop down doesn't give me the option to restore from backup; it just says Backup. Any help is GREATLY APPRECIATED.

    Actually.... contacts are part of an iTunes backup.
    You can verify that information here:
    http://support.apple.com/kb/HT4946
    But it seems the issue here is the fact that you can't find how to restore from a previously created backup. There is no button to hit to do so...
    You can go to Settings>General>Reset>Erase all content and settings (on your device)
    This will restart the setup assistant for you... and as you're going through you can select to restore your device from an iTunes backup.

  • Safari not able to access internet through wifi after updating iphone 3gs with ios6

    i have updated my iphone 3GS with ios 6 and initially my wifi worked fine but for some strange reason it stopped connecting to internet even though its connected to my home wifi i have and tried and failed with all the possible solutions given in this forum i am able to use safari with my cellular data network but with wifi its not working please provide me with a solution

    well, first check whether you're connected to the blackberry network...
    how can I check whether myself connected to blackberry?
    Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
    If not give a hard-reset to the phone (remove the battery put it back once)...
    And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
    .RoCkInG dUdE.
    Trust Your Technolust | Do not PM for any support
    If a solution received, please hit on to show your support.

  • While updateing iphone 3gs, lost internet connection. now only option is to restore in itunes. I just want to finish update!

    I was updating my iphone 3gs. I lost internet connection when my went to restart (I forgot I was using hotspot). Now when I connect my phone to finish, the only option it gives me is to restore. I don't want to do this. I have disconnected and restarted phone and macbook pro. Software is up to date. What can I do?

    If the only option is giving is to restore or has a connect to itunes logo - then that is the only option you have. You may need to put it in forced recovery mode in order to restore. http://support.apple.com/kb/HT1808?viewlocale=en_US
    Once restored you can restore from a backup or sign into icloud in order to recover any contacts, etc that you had on the phone previously. If you are still missing contacts, which is usually one of the most important things on a phone than make sure you have added any and all email accounts you previously had on the phone.

  • TS3694 Error while updating iphone 4 to ios6 , an unknown error occurred 3194

    an unknown error occurred 3194 ...while updating to ios 6

    Read the article from which you posted your question, it explains how to address the error that is occurring.

  • While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

    While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
    Can anyone help me to resolve this issue.

    Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
    First did a full back up of  iphone using iTunes
    Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
    Disconnected USB cable from iphone
    Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
    Pressed and kept holding Home button while plugging cable back into phone
    I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
    Recovery Mode alert came up in iTunes.
    Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
    iphone did not appear in iTunes due to missing pairing file (that made me nervous)
    iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
    Eventually the iphone asked if I wanted to restore from a back-up (whew!)
    A window opened in iTunes and I was able to select my previous back-up file for the restore
    A full restore from back-up then occured
    I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
    When the restore was done I had to re-enter some passwords, but everything was there
    iOS is now 5.0.1 (9A406). The whole process took about an hour.

  • Since updating my iPhone 3gs to ios6 I can no longer connect it iTunes. How can I fix this?

    Since updating my iPhone 3GS it IOS6 I can no longer connect to iTunes. How can I fix this? I checked the settings for iTunes and it appears to be correct.

    I have now managed to sign into iCloud but I still don't seem to be able to sign up my Apple ID for iMessage

  • HT4623 Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same.

    Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same. Help me please! T-T

    Please see the  More Like This  section on the right.

  • TS3297 after updating my iphone 3gs to ios6 a message "we're sorry, we are unable to continue with your activation at this time." pls help!

    after updating my iphone 3gs to ios6 a message "we're sorry, we are unable to continue with your activation at this time." pls help

    I have the same problem after updating to the latest iTunes. I purchased an iPhone 4S this past summer and gave my 3GS to my 6 year-old minus the SIM card-- an instant iPod Touch. Things were fine until the latest version of iTunes 11.0. Until I updated to 11.0.1, iTunes would not even "see" the iPhone.
    How do I get past the insistence to activate the phone? Right now, it's a useless brick.

  • I have updated my iPhone 3GS to iOS6, I am now frozen on backing up to iCloud. HELP! What can I do?

    I have updated my iPhone 3GS to iOS6 and now my phone is stuck at backing up to iCloud! What can I do? I do not want to lose any data.

    Try resetting the device.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings.
    You will not lose any data as a result of the resets.

  • My computer had reboot while my Iphone 3GS update, now it's blocked int the loading bar of the update. Help me !

    My computer had reboot while my Iphone 3GS update, now it's blocked int the loading bar of the update. Help me !

    J'ai trouvé la solution moi-meme, mais merci quand meme de m'avoir repondu bande de nazes.

  • Iphone 3gs  Up IOS6 beta2 is normal use but today is Show up Screen "Active Required"

    iphone 3gs  Up IOS6 beta2 is normal use but today is Show up Screen "Active Required"
    but cannot active Screen is " We re unable to complete your device"
    This device is not registerd as part of the iPhone Developer Programe
    If you are a member of the programe, please register your device in the iPhone
    Developer Programe Portal at
    http://developer.apple.com/iphone/
    But i register already but Cannot Active
    Please help me.

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • Iphone 3GS on ios6 sound problems

    Hi,
    I have just updates a 3GS to ios6 and am having sound issues.  The only time all the sounds work is if the phone is plugged in (it doesn't matter if it's a dock or to a computer or to charge).  When it is not plugged in it will play songs for approximately ten seconds before the sound cuts out, it will play the ringtone but not the text tone.  The majority of my apps have no sound, and some show that the sound cannot be changed (the little speaker has an x next to it rather than showing the volume).  It seems to work fine when headphones are plugged in.
    Does anyone know a fix for this?
    Thanks

    Unfortunately you are stuck if the water indicator has turned red...now I don't mean to argue with you when you say it's never ben wet...but I will say that in order for the indicator to turn red it MUST have a fairly good amount of water or moisture contacting the indicator...that said if you say you treat it like gold then the only possible answer is that someone got it wet that you showed it to or maybe your kid got it wet and didn't tell you...bottom line that indicator doesn't turn fully red without a good amount of water coming in contact with it...so I'd really look at friends or Fam that has touched the phone...
    Part two...the fix...sadly with water damage there are no magic fixes...the questions you asked at the bottom about why can they still hear you etc...this is a side effect of the iPhone being partially damaged nd not enough to stop the MIC from transmitting but enough to stop the earpiece from giving sound...you say the speaker works and headphones work...
    It is possible that over time the iPhone will again operate properly...for now...I'd go and find a bunch of those little packets of Silica Gel balls that come with many items and stick them all inside a ziplock bag with the iPhone for a good week...DO NOT USE RICE ...use the packets of Silica Gel...This is not a 100% fix but it's the best shot you have of getting operation back that you desire...
    If the indicator is red Apple and any authorized agent will NOT be able to warranty the iPhone. There are several out of warranty options but if I remember correctly water damage is not onr of them...you'll have to verify that with Applecare or a store...

  • ERROR MESSAGES WHILE SYNCING IPHONE 3GS WITH ITUNES 11.0.1

    ERROR MESSAGES WHILE SYNCING IPHONE 3GS WITH ITUNES 11.0.1
    I just upgraded to iTunes 11.0.1 and although my music, podcast and apps sync with my iPhone 3GS (Version 4.1), iCal and Address Book doesn't! I get the following error messages:
    After clicking OK, another dialog box appears that states:
    Also, iSync has this to say:
    Until the upgrade, I had no problems syncing my iPhone 3GS with iTunes!
    How can I correct this new issue?
    Thank you very much in advance,
    David Sampson.

    Mmmmmm how strange.... have just closed and reopened and problem seems to have cleared.....

  • HT3743 Updated iphone 3gs gone wrong, please help!

    After updating my iphone 3gs to ios6, i have an Apple logo and a loading bar which is stalled, what should I do?
    Thanks for any help.

    Hi! even thou i didnt pay for the app at first cus it was free n now u have to pay for it??

Maybe you are looking for

  • [SOLVED]Network/Wireless, after 15mins, locks sudo [..]

    Hello, I have been using Ubuntu for a while and wanted to move to Arch Linux. I did. Got everything set up but have one major problem. Wireless. I have my wireless driver installed through Ndiswrapper and works. Connecting to the router is fine. No p

  • MacBook Pro OS 10.9.4-Slow

    Firefox 31 also slow, or hangs up EtreCheck version: 1.9.12 (48) Report generated August 4, 2014 at 6:27:48 PM EDT Hardware Information:     MacBook Pro (13-inch, Mid 2012) (Verified)     MacBook Pro - model: MacBookPro9,2     1 2.5 GHz Intel Core i5

  • SAP Query Doubt

    Hi, Guys!     I'm trying to create a SAP Query, which should display the old and the new position of employee.     The problem is that the SAP Query generates 2 lines for each position, the employee had.    We need a report that display in two or tre

  • Can't instantiate default ORB implementation ....

    I'm developing a J2EE application, and I have this ERROR : java.lang.ExceptionInInitializerError: org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation com.visigenic.vbroker.orb.ORB minor code: 0 completed: No      at java.lang.Throw

  • Get device profile

    Hi, Just wondering if it is possible to get device profile given any device criteria. I have only found getDeviceProfile in AXL which requires a profile name. I have not found any table relations in the documentation, for the SQL route, either. My sc