Issue while uploading data from R/3 production to BW production

Hi,
We are facing an issue as follows.
We are trying to transfer master data from R/3 Production server to BW Production server.
For the first time when we transfer data, upload is happening properly. But for the second upload - we dont get any error where as in the monitor data transfer shows 0 from 0 records and the status never changes.
But if we restart the BW production server and then upload data, it works fine for the first upload but the same issue from second upload.
Any suggestions please?
Regards,
Ram.

Hi,
Roberto - In ST22, there is no short dumps related to this issue. The issue is not specific for a single object. For eg. If i upload 0MATERIAL (after restarting the server) it works. Now I try to upload 0DIVISION (any object) it doesnot get uploaded.
Sriram - We are trying Full Upload.
Hari - I can see the records in RSA3 of the source system. The records are available and also they are extracted properly.
Shreya - Basis people are also involved and trying to find out a solution.
Manfred - Actually data is available. But the data doesnot get uploaded. So i guess changing the traffic lights settings might not help.
Regards,
Ram.

Similar Messages

Issue while uploading data from flatfile to Transaction(VK13).

Hi All,
I am facing an issue while uploading the data from flatfile to the transaction(vk13). My flat file is as shown below.
SalesOrganization DistributionChannel Customer Material Releasestatus Amount Currency Quantity UOM ValidFrom ValidTo
2000 01 0010029614 AT309739 A 20.00 USD 1 PC 09/11/2014 12/31/9999
If I upload these data using the RV_CONDITION_COPY FM it is succesfully uploading to the relevant tables(konh,konp) but in the tcode VK13 I am getting all values fine, except UOM. Instead of PC it is showning as ***. I did not understand why it is happening please give an idea to solve my issue.
Regards,
Chakradhar.

Hi Raymond,
Thanks for your reply.Yes,If I use CONVERSION_EXIT_CUNIT_INPUT in my program the issue is, Assume If the user is giving PC as value for UOM field in flat file and upload the flat file.It is successfully uploading the value PC to the UOM field in transaction VK13 but the in the database table(konp) it is showing the value as ST.
Regards,
Chakradhar.

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

While uploading data from local file

Hi,
While uploading data from local file having the header text into interal table using the GUI_UPLOAD function module,there is problem in upload because of header text in file, do we have any option in this FM itself to skip this header text and upload from sdecond line because as per our requirement we can't delete this header text from the file.

Hi Manish,
Do you have the problem while uploading? Is it giving any error?
If not, if your uploading is successful into the internal table, then delete the first row, which is header, from the internal table using index eq 1.
Regards,
Chandra Sekhar

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Error while uploading roles from quality to production

Dear friends,
I have to upload roles from quality to production.
I have downloaded it from qualtiy but while uploading to production it is giving me an error "File does not contain valid data".
Can anybody tell me what could be the problem and how to resolve it.
Thanks in advance
regards
Nirgun

HI matore,
the best way is to transport the roles from DEV to QA and then to production as julius suggested
are you trying for mass down load are single role
Mass download
go to PFCG >> utilities>> Mass download>> select all the roles which you want to move it to production
and execute save it on desktop
now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file which is saved in desktop and click ok
mass generation of roles
in the menu click on utilities>>mass generation>>give the role names with you have uploaded and click on execute select all click on genetate button
download a single role
go to PFCG>>in the menu click on role>>click on down load and save it on desktop
now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file and click ok
now you needs to manully generate the role
do the user comparison
hope this helps
thanks
kishore

Deadlock issue while sending data from PI to JDBC !!!

Hi All,
We are getting below error while sending data from PI to JDBC (Database).
Error - JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'store_order_details' (structure 'Order_details_Statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 61) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
This is happening when more than one PI message is trying to deliver data at the same time to database.
Can anyone let us know the root cause of this issue and how we can rectify this.
Is there some setting which we can use to do parallel processing as Delivering one message at a time to database is causing performance issues & taking lot of time.
Thanks
Neha Verma

Hello Neha,
Strange but can please get below information.
Please check with the DB admin about if the user is getting locked or is there any hanging threads related to user.
Also confirm with DB admin if the exclusive lock is on table or on the row when you try insertign or updating information.
You can share the user from the receiver channel.
Regards,
Hiren A.

Change Value While Uploading data From Excel File

Dear Expert,
Please guide me is it Possible?, if yes then How?
We have one BDC Uploader there After uploading data from Excel File, i want to check one field like this....
if it_f65data-newbs contains any Alphabet.
then user Should be able to change value on the same time while executing Program in table.
Please tell me how i can change value in running program
Regards'
Shelly Malik

Hi,
What you can probably do is, perform a consistency check on your data in the internal table and segregate all those rows that have inconsistent data (in your case, the field NEWBS containing albhabets) into another temporary internal table. Display the temporary internal table in an editable ALV grid saying that these data have not been inserted to the database, coz they have inconsistent data in the field NEWBS. Allow the user to edit and then save the data which will consequently refresh the internal table contents.

Error while uploading data from a flat file to the hierarchy

Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Sri

there is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go.

Facing Issue while Extracting Data from Essbase using CalcScript

Hi All,
we are getting this error while extracting data from Essbase by CalcScript using ODI.
Does anyone have the answer
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5046.f$0(<string>:1)
     at org.python.pycode._pyx5046.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Hi Now i am getting this error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5054.f$0(<string>:1)
     at org.python.pycode._pyx5054.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Issue while loading data from DSO to Cube

Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & Soujanya

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Problem while loading data from quality to production

Hai,
We are using standard extractor 2LIS_11_VASCL, and in test case in QTY 300, we were able to make some changes and see the changes and see the results of the changes in T-CODE RSA3. When we try the same changes in PRD300, No Changes are triggered and T-CODE RSA3 shows no changes.
Can any one suggest me regarding this prolem...

Hi bandi,
Instead of trying for the same changes in production, why cant you do the transport the object from Quality to Production & then check for the changes in RSA3.
You are transporting the object only from Quality to production.
As no data is present in PRD, u may not be finding any changes in RSA3.
Hope it helps.

Problem while uploading data from flat file

hi friends,
suppose if there are 100 records in flat file , if 20 records uploaded with out any problem and if error occurs while uploading remaing data . is necessary to upload entire data again or else only remaining data should be uploaded?
i had used call transaction for purchase order application?
please give me reply soon its urgent
thanks & regards
priya

Hi Hari,
you have to upload the remaining data.
as u have used CT method, do 1 thing trap the error data in runtime & prepare another flat file. next time correct the data in new flat file. & run the DBC program again with this new flat file.
Reward if useful
Regards
ANUPAM

Issue while uploading data from R/3 production to BW production

Similar Messages

Maybe you are looking for