Issue wit hthe installation on Unix Sun solaris

Hello,
We are doing a fresh installation on Unix sun solaris Sparc 64 bit
I have downloaded the software and when i was trying to invoke RunInstaller i am getting the following error message and this is regarding Display
Error Message :
Checking Temp space: must be greater than 250 MB. Actual 66655 MB Passed
Checking swap space: must be greater than 500 MB. Actual 66889 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
we didnt actually have any licensed version of xterm or any other Display unit.
As this is a test server i am working i was looking for free software which also supports ssh and work as a Display tool.
Note: This should support ssh.
Would appreciate any help.
Thank You

See this thread - installing the 11g database via putty
HTH
Srini

Similar Messages

Unix(Sun Solaris)-Servlet settings

Hi all,
Iam a new user to unix and trying to compile a servlet in unix(sun solaris)platform.getting error as follows
"Package javax.servlet.http not found in import"
i assume that this is a problem with classpath setting.Can anybody help me how to set classpath and what is the command for it for servet package.
the basic java classes are compiling fine.
Expecting a reply soon.
regards
sara

I imagine that your are including the lines:
import javax.servlet.*;
import javax.servlet.http.*;
in your servlet. If that is the case, when you compile your project try:
javac -classpath .:<path to servlet.jar>:<path to server.jar>: YourServlet.java
I hope this helps.
Regards
Cardwell

Installation BOBJ XI 3 on UNIX ( Sun Solaris ) with Oracle database

Hi All,
I want to deploy and install BOBJ XI Enterprise 3.1 on Sun Solaris with oracle database.
My question is, do we need to add some oracle licenses stuff in BOBJ XI Enterprise server or we just using a connection from Sun Solaris to oracle database ?
Pls Advise,
Rgds,
Denny

Hi Denny,
the risk is the same whatever DB server you are using. Once you have a setup where more than one application access the server, overload caused by one application can influence the performance of the other ones. You have to check if your DB vendor offers tools to monitor and limit the load on your DB server. But we are talking hypothetically now. I would recommend to check what's the actual load on your oracle DB server. If the server is not working at the limit (let's over 80% all the time), then I think that you can try to install BOBJ also in an existing oracle instance on the oracle server. You can reduce the risk and make the maintenance easier if you setup a dedicated oracle instance on your DB server just for the BOBJ repository.
Regards,
Stratos

Portal Installation Problem on Sun Solaris

Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
Sandeep

I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null

WebLogic 6.0 Installation error in Sun Solaris 2.6

I tried to install the evaluation copy of WebLogic App Server in a Sun Solaris
2.6 box and when I run the installer, it stopped because a symbol in a xomEuro.so.2
file was not found.
The installer stopped and showed an error similar to:
../usr/openwin/lib/locale/iso8859-1/xomEuro.so.2: _XlcCompileResourceList: referenced
symbol not found
I will very glad to know what was the problem and of course, how to solve it.
Thank you very much
Michel Fornaris
Senior Web Developer
Baptist Health Systems of South Florida

Evance Mok wrote:
Added "DebugConfigInfo OFF" to the "IfModule" tag in httpd.conf and still no
luck. Stopped the segmentation faults, but we are unable to forward the jsp
request to weblogic. Is the "DebugConfigInfo" parameter in the right
location? Are there any other suggestions?
Also, from the documentation, the "AddModule" command for weblogic is not
added in some cases, why is this the case?This just means that the apxs script does not add it so you will need to add it
manually...
>
>
Thanks,
Evance
"Vittal Gunturu" <[email protected]> wrote:
Hi we are proxying all the jsp requests from apche to wl6 on a solaris 2.7.
Always getting a segmentation fault ..
[Thu Jan 25 10:45:57 2001] [notice] child pid 9107 exit signal Segmentation
Faul
t (11)
Here's the section of the httpd.conf file
LoadModule weblogic_module libexec/mod_wl.so
AddModule mod_weblogic.c
<IfModule mod_weblogic.c>
WebLogicHost 192.168.1.33
WebLogicPort 7001
MatchExpression *.jsp
ErrorPage http://www.yahoo.com
Debug ALL
</IfModule>
Any suggestions
thanks
vittal
This is a known problem. It will be fixed in sp1.
For now, you need to add "DebugConfigInfo OFF" to httpd.conf.
Jong

Unable to compile in unix sun solaris 8

hi,
I am also facing same issue. I have installed latest version of JRE (6u7) in Sun solaris 8 x64 bit (SPARK Processor). when I try to see java version (./java -version). it gives following error.
ld.so.1: ./java: fatal: libjli.so: open failed: No such file or directory Killed
thanks in advance
Edited by: sabarishrl on Oct 16, 2008 1:55 PM

reinstall jdk, issue solved.

Tracefile for 7.3.4.4 database on Unix (Sun Solaris)

What happens if sql_trace is set to true and there is no room in
the file system to write any tracefiles?
Does the database stop and you have to resolve the problem?
Does the database continue to work and just doesn't create any
more tracefiles?
Ronald.

What happens if sql_trace is set to true and there is no room in
the file system to write any tracefiles?
Does the database stop and you have to resolve the problem?
Does the database continue to work and just doesn't create any
more tracefiles?
Ronald.I am not sure, maybe in worst case the db stops.
Why do you want to use sql_trace ?

Front end of PL/SQL for Sun solaris

Hi,
What are the popular front ends and also Which is best front end of PL/SQL under
UNIX (Sun Solaris) platform.

You can use Sql Navigator from Qwest Software
which can run on Win95/NT/2000. You can use SQL*NET to connect to your Sun Solaris or any other Oracle instance running on UNIX platform.
Jack
null

Help !!! My forms from NT to Sun Solaris .. weird now

Hello,
I have brought my forms, originally developed on NT,
to UNIX Sun Solaris and every single fonts in the forms
have changed.
Is there a command to fix the fonts when bring to another
platform ?
Thanks so much in advance.
Thuy
null

T.P.
I am sorry but we don't deal with Oracle Forms.
Oracle Migration Workbench Team.
T.P (guest) wrote:
: Hi,
: I need to bring my forms60 originally developed on NT to
: Sun Solaris. Do I need to write a script and is the fonts
: going to be change?
: Thanks very much.
: Thuy
Oracle Technology Network
http://technet.oracle.com
null

Headstart 6.5 Deployment environment - Sun Solaris Intel

Is it possible to deploy the headstart runtime environment to UNIX Sun Solaris Intel?
I am trying to make the 'hsdcgi65' file for Sun Solaris Intel without success. The make file is for solaris (SPARC).
Modifying the make file does not do any good and while compiling, I am getting the error "hsdcgi65.o wrong machine type".

Louis,
Your best bet is to just make a static HTML launch document for your application rather than using the cgi launch
environment. You can create a static launch document by using the generic Application Launchform on your
(windows) development platform to launch your application start form. Right-click on the browser window and
select View Source. Copy and paste this code to make a static HTML launch document.
Regards,
Lauri

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Application Migration from HP-UNIX to SUN Solaris

Hi Gurus,
Need help on the application migration from HP-UNIX to Sun Solaris . Copied the filesystems APPL_TOP, OA_HTML, OA_JAVA, COMMON_TOP/util and COMMON_TOP/_pages from SOURCE( HP) to TARGET SUN-solaris as per 238276.1
Now trying to clone Autoconfig XML context file on the TARGET System
perl adclonectx.pl migrate java=\opt\java1.4 \
contextfile=\ul01\app\applmgr\lasrx\admin\LASRX_fiapd4.xml
Error: source context file ul01appapplmgrlasrxadminLASRX_fiapd4.xml does not exist.
Questions:
======
1. we still need to install jdk in the TARGET or copy the file system from source(HP) to target( Solaris) bring the JDK and how to check jdk on Solaris?
2. In clone autoconfig XML, contextfile=? Is the location of SOURCE or TARGER?
3. I think running above with root permission.
Please help somebody on this issue.
Thank You.

Hi Hussein,
I need your help on the Application migration from HP-UNIX to SUN Solaris. As per the note 238276.1 we dont copy $806_ORACLE_HOME for cross platform migration, Copied all the filesystem from SOURCE to TARGET but rename it because it suppose to create while installing Middle tier.
Issue:1
=====
When i start to set environment like below, i get the error and
. /ul01/app/applmgr/lasrx/APPSORA.env
ksh: /ul02/app/oracle/lasrx/8.0.6_new/LASRX_fiapd4.env: not found
I am trying to install Middle Tier Technology Stack on SUN server ( Migrating from HP-UNIX to SUN solaris)
Issue 2: ( Display error) while install Tech Stack
=====
./rapidwiz -techstack
Rapid Install Wizard is validating your file system......
>> Wizard requires the DISPLAY variable to be set.
>> Please set your DISPLAY variable and restart Rapid Install Wizard.
even i can not see
echo $DISPLAY because not set the environment.
Need your help and suggetions on this.
Thank You.

Sun Solaris 10,Upgrade 8 or higher,having issues with VxFS,for Oracle 11gr2

A while ago, we tried doing a prototype upgrade of our main Oracle 10g db to Oracle 11gr2.
The OS on which our Oracle 10g is running is Sun Solaris 10, upgrade 4.
According to Oracle 11gr2 documentation, we need Sun Solaris 10, upgrade 6 or higher for Oracle 11g2.
The filesystem we are using is VxFS, Veritas File System.
According to our system administrator, we had issues , making Sun Solar 10, upgrade 8 , work with the VxFS filesystem.
I was wondering if anybody is running Oracle 11g2 on Sun Solaris 10 upgrade 6 or higher with VxFS file system.
At present, our Oracle db upgrade project is on a hold, because of the above issue. So your help on this , can really help us in figuring out if there is an issue between VxFS filesystem and Sun Solaris 10 OS.
Thanks
Ashish

Hi Ashish,
We are not running Veritas Cluster file system.
We tried moving our Oracle 10g r2 db on ZFS ,before doing the upgrade and performance on ZFS was worst.
ZFS has certain memory parameter setting. If you did not configure that then ZFS will eat your complete system memory.
My system administrator, has gotten a copy of Solaris 10 upgrade 9 and will try that with VxFS.
I was curious to find out if folks are running Oracle 11g on Sun Solaris 10 with VxFS file system and if they had experienced any issue.If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Recently i installed Oracle database 11.2.0.2 on one of my test server. I have created two databases - one on ZFS and another on ASM.
Refer:
http://appsdbaworkshop.blogspot.com/2010/10/installation-of-11202-on-oracle-solaris.html
We dont have any performance issues. We are testing it for the performance benchmarks on both of the filesystem.
If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Regards,
X A H E E R

MUT-03010 during installation on SUN solaris

Hi,
I am trying to install a 4.7 system with DB2 on a Sun Solaris server.
In the database installation on u201CDB2 UDB update database configuration before loadu201D stage, I keep getting the following error:
ERROR      2008-07-22 13:49:09
           CJSlibModule::writeError_impl()
MUT-03010 Execution of the command "db2 -tvf update_db_cfg.sql -r update_db_cfg.res -z update_db_cfg.out" finished with status TST_ERROR.
I couldnu2019t find any reference to this issue anywhere.
I tried dropping the database & restarting but that didnu2019t help.
Thanks for your help.
Yoav Zilberman

Hi Yoav,
SQL1390C The environment variable DB2INSTANCE is not defined or is invalid.
please check your environment settings.
The SAP processes will find the DB2 CLI libraries either through
(1) >= 7.00 kernel only
/usr/sap/<SID>/global/db6/                ( default path for DB2 CLI driver )
(2)
DB2INSTANCE = db2<dbsid>            ( DB2 runtime client )
In this case the instance directory ~$DB2INSTANCE/sqllib needs to exist .
(3) >= 7.00 kernel only
DB2_CLI_DRIVER_INSTALL_PATH    ( CLI driver path )
If none of those can be applied. The libraries may be found using the LD_LIBRARY_PATH .
In this case the libraries can be loaded but the message files can not be found and every SQL error results in SQL10007N .
Regards
               Frank

Hardware system specifications for 11i installation on Sun Solaris

Please advise the hardware system requirements like CPU(s), CPU speed advised, disk space, memory, etc for proper performance of 11i on a Sun Solaris machine.
Thanks
Prasad

YOU HAVE TO SET THE UNIX VARIBLE DISPLAY=hostname:0.0; export DISPLAY
and then execute "xhosts +" before starting the Rapidwiz.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ketul Trivedi ([email protected]):
We are trying to do fresh installation of Oracle Financials 11i using rapid install. Rapid install asks for all parameters (APPL_TOP, COMMON_TOP, etc) and then at one point of it will ask to save the installation script or to start the installation with rapid installer.
We opted for creating the installation scripts and the first line in the script is:
su oracle -c "/apps/stageing/disk1/orclapp01/rapidwiz/../install/runInstaller -responseFile /apps/oracle/installInfo/rapidinstall/tellme/agniorawdb.rsp"
We get following error while running this:
# su oracle -c "/apps/stageing/disk1/orclapp01/rapidwiz/../install/runInstaller
-r
esponseFile /apps/oracle/installInfo/rapidinstall/tellme/agniorawdb.rsp"
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
Xlib: connection to ":0.0" refused by server
Xlib: Client is not authorized to connect to Server
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the
value of the DISPLAY variable.
at sun.awt.motif.MToolkit.<init>(Compiled Code)
at java.awt.Toolkit.getDefaultToolkit(Compiled Code)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.getImage(Compiled Code
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<init>(Compiled Code)
at oracle.sysman.oii.oiic.OiicInstaller.main(Compiled Code)
Any one have any idea?
Would appreciate response.
Thanks,
Ketul.<HR></BLOCKQUOTE>
null

Issue wit hthe installation on Unix Sun solaris

Similar Messages

Maybe you are looking for