Issue with 2 mics when recording Garageband podcast

Hi,
I have two Blue Snowball mics set up in the aggregate devices of garageband but I can only chose stereo 1 & 2 and not Stereo 3 & 4 (which doesn't show up at all) when enabling multitrack recording while podcasting.
Surprisingly, when I first set it up, both Stereo 1 & 2 and Stereo 3 & 4 showed up and I could record using two mics. However as I tried to do another podcast after shutting down Garageband, stereo 3 & 4 disappeared. (Even after setting it all up in the audio midi application).
How do I resolve this?
Thanks,
Mesh

GarageBand (1) only supports a single track at a time for recording. You could do what you want in GB2, up to 8 audio tracks (and 1 MIDI track) at the same time.
GB2 really is a great upgrade from version 1, but if you're determined to stick with version 1 you could record the 1 stereo track, then copy the region to a second track, set the pan on each and the EQ on each. This would be the easiest method, you could get more complex, but this should work well enough.
--HangTime [Will Compute for Food] B-)>

Similar Messages

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having the same issue but mine is with Netflix. And there are only 4 categories now on the main menue when there used to be 5. Something went crazy with ATV software.

Importing to iMovie: How do I use an external usb mic when recording with the built-in FaceTime HD Camera?

Hello all
I'm scheduled to work with a friend this week; I'm going to help him make a simple audition DVD. I promised him I had the necessary equipment and such.
I was importing from the webcam using iMovie. If I can't use my external mic to record for the video, there is more involved in the editing process. I was hoping to record the video and audio into one package. I'm using the built-in FaceTime webcam on my macbook pro and a ZoomH1 on usb.
I've tried changing the audio in system preferences: input to H1. This works when recording with audacity or anything else. I even changed the input on FaceTime to H1. There aren't any preferences I can find in iMovie to change the input for importing video directly from the webcam.
How do I change the audio input for direct import on iMovie?
OR
Is there something else I can do to have HD video and HQ audio captured in one video file on my macbook pro?
I suppose I can record the video and audio separately but that is usually much more involved. This is why I got this usb microphone lol.
Thanks in advance,
-Seth

I just found using QuickTime Player to record a movie works great. I can easily change the audio input. iMovie is silly. lol
If I missed anything let me know.
Thanks
-Seth

Issue with clearing previous record while uploading through LSMW

Hi friends,
I have created lsmw for hiring action using transaction PA40. i have a tab delimited flat file, when i run the lsmw script the first record is uploaded perfectly. However the upload halts for the second record, coz the previous record still remanins, is there an issue with the recording or do i need to clear anything?. How do i resolve this one and continue uploading other records.
Regards,
Quavi

Hi Friend,
In the LSMW, Under the User menu you have Display Read Program and Display Conversion Program select this and open the respective program you feel having problem and put a break point in the Loop statement and debug. I will help you to identify the problem to resolve.
Rgds,
Jey

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Issue with Backflush when Consuming Fractions

I am having an issue with back-flushing I was hoping Guru's could help me .
Here is the issue:
In the BOM for every 1 EA of X(Parent) we need .025 EA of Y(Child)
The parent part is X. Using CS03 and typing in a quantity of 20 pcs everything looks perfect. I would consume component Y .500 of a sheet.
If you review MFBF for 20 pcs. of X it wants to consume 1.00 of Y. (1 whole sheet instead of .5)
I know I could put a rounding value of 40 on the X to fix this but that would not be an option for this particular process. Measurements of each of these is not exactly the same and very critical.
Is there an issue with SAP consuming fractions? It seems to round up to 1 whole sheet when it should only consume .500 of a sheet. Do you know of a way to fix this?
Any info would be greatly appreciated
Thanks,
Safi

For some reason which is unknown for me, this topic is very hard to manage within SAP.
We face exactly the same issue producing Tanks from steel sheets.
Base Unit of Measure was EA for Sheets . SO, we create a copy of EA called ED (each with decimals) , allowing up to three decimals and assign it as an alternate UoM to the material. In Bom, we had, for instance, 3.6 ED to produce a tank.
But, in reservations the quantities are stored as Base Unit of measure and without decimals, regardless the fact that you a have an alternative UoM , etc etc.
So, if you consume the component based on MIGO and reservations, SAP will propose 4 EA (o 4 ED ! which is even stranger - because of double conversion between base and alternative UoM) . If you consume by backflush, you dont even realise that the GI is being carried out in that way.
We are still waiting for some solution after we sent a message, describing the issue. It is advisable to search the SAP Notes to see if there is some solution .
So far, alternative UoM is not the solution.
You must change the base unit of measure to ED or have some manual procedure of checking the quantities.
Of course, EA can be redefined with decimal parts, also, but this normally can lead to some other problems (other parts managed striclty in EA, i. e. a tank, could be managed in fractions, 0.75 of a tank !!! etc. )

Issues with Images when used w/ Caption Widget & Book File Size Q

Hi Everyone,
I was having issues with images not showing up and determined it was the caption widget causing the issue. I now have one of two issues happening consistently. Either the image does not show at all or just the caption box with bkgd gray and caption text shows, but without the image.
Anyone else have this issue?
Ay ideas would be greatly appreciated. I wasw just about finished with this project when this started!
Also, the size of the book is considerably larger than I realized.It is 81 mb. . . How does this compare to any of your books?
THANKS SO MUCH!
Belinda

Belinda,
I can't speak to your main issue, as I cannot recreate the problem over here.
As a guess, have you checked to make sure you're not running out of harddrive space? iBA can consume space quickly, and behaves oddly when it begins to run out of room.
But as far as filesize goes, I can only wish for an 81 MB book. Mine is currently a little over 2 GB and growing. Tonight I had to split it into 2 volumes just so iBooks Author can run at a reasonable pace. I was getting tired of waiting 1-2 minutes after dragging a video around on the page before I could get control of the program again.
You should note that Apple is expecting large filesizes for this new Multi-Touch format. The docs on iTunesConnect say the largest allowed upload size for a book is 16GB 2BG (see link below)
Message was edited by: mudmas

Issue with memory when trying to do a restore on iPad 2

I'm had a few issues with my iPad and am trying to do a restore, I start OK but then after a while I get a "can not be restore. The disk you are attempting to use is full" the PC I am using does not have a large C drive and space is limited but I do have a large external drive attached with loads of space. Is there any method of using the external hard drive when restoring?
I hope this makes sence, iPad now been down for over a week and issues getting me down.

The restore must be done within iTunes on your PC while iTunes is running so - No - you cannot restore using the external drive. You might try moving some of the stuff on your C drive to the external drive to free up space and then restore your iPad.

TS5376 Issues with itunes when reinstalling?

After I got the error messages I removed all apple software from Programs and now when I reinstall following the instructions I can not find the saved setup file? What do I try now?

See the further information section of Troubleshooting issues with iTunes for Windows updates for direct download links.
tt2

Issue with CAT2 when transferring to CATM

Hi All
We have a scenario where a service PO for a contractor is raised against a network and when the user enters time in CAT2 against a WBS, we have an issue with the transfer (CATM). As it stands, we need to have the same account assignment as the PO.
is there a way to process this please?
Thanks
Sam

Hi,
I think you should be using CAT5 instead of CATM to transfer to PS. If approval is required as per dataentry profile, you will also have to execute CATS_APPR_LITE prior to CAT5.
Regards

X61 Standby issue with XP when undocked

Hi,
Just did a HDD upgrade on my most excellent X61 and after a clean install of XP, I now have an issue with the Standby functionality. Here's the symptoms:
1. If I restart while X61 is docked, I get normal startup and standby mode works both when docked and after proper undocking procedure. Works as expected.
2. If I restart undocked, the Standby option in the "Turn Off Computer..." menu is grayed out and sure enough, never goes into standby. I have of course tried to modify power options in the Control panel, but it never gives me the option to go into Standby mode when lid is closed.
I do have dual boot on my X61 with Debian Linux and that supports Standby, no issues.
So, after some background reading, seems there is a possibility that I missed a driver during installation and some HW is not letting the X61 enter standby when it is not docked.
Any ideas which driver this may be??? Though I'd ask before having to through and try to install ALL drivers again
thanks in advance for any input...
Jeff

Just tried installing lots of stuff I probably don;t need with System Updater. Now I've got:
- Still no standby when undocked
- 2 instances of thinkvantage toolbox that does nothing but try to repair "installed fonts" and fails
- ThinkPad Video Features (Intel GM965) keeps recurring in the updates. When I try, it says successfully installed, but ???
Any ideas?
thanks

Issues with pagination when using Adobe table with Web dynpro for ABAP

Hi All,
I am facing strange issue with table text.
I have three cols in table, one is of type Char255 and other two cols are of type string.
The text in the col 1 is displayed perfectly but in other two cols of type string whenever we have pagination the text in table is getting truncated and in next page new row starts.
Could you please tell me the settings that will enable flowing of text in the row of table to next page.
Thanks,
Arti.

Check the properties of the text field you use for those columns (if you want to control it on this level) or check the same attribute for the row subform (one level up control): "allow page break within content".
Regards Otto
p.s.: we all have deadlines... and manage to pay something back. Think about it.

Issue with Metadata when importing 30K images from Photoshop Elements 7

I'm a new mac user and am moving ~30k images from my PC to my mac. I have photoshop elements 7 that I use on the pc and am moving everything over to Aperture. I maintain all of my organization on the PC using "key words". I made sure to move all of the metadata over to the Mac with the images. However, I would say approx 5,000-10,000 of the images have the wrong Metadata. For example, a key-word "Vacation" is showing up on an image that should say "Christmas". This is just an example and it's creating major issues with my smart albums. The wrong images are in the wrong albums. Help!?!?

Hi Shellie
Is anyone familiar with PSEDBTOOL? I've been told it will do a good job applying metadata to files inside PSE but I'm afraid to run it and have it screw up my current library.
I'm not familiar with that tool. What I will say is that your caution is well founded. If you do try to run anything like that on the PC side, ensure first that you have a backup of any data that might be modified - and that you (a) know how to restore from the backup in case anything goes pear-shaped and (b) you've actually tested your backup (by doing a restore) and are confident with its integrity.
One other thought has occurred to me since earlier. Let's try a different tool...
– Locate one of your problematic master files - on the Mac side - as exported from PhotoShop Elephants.
– Open it in Preview. (It lives in the Applications folder.)
– Select +Tools > Show Inspector+ (if the Inspector is not already showing from an earlier session).
– Click on the Inspector icon which resembles a simplified traditional magnifying glass.
That displays the keywords in the file.
How do they compare with your expectations (from PSE)? How do they compare with what's showing in Aperture?
This won't solve the problem, but it might just shed some more light on the problem.
Regards,
Gary

Serious issues with Timer when RunTimeExceptions are thrown in TimerTask

Hi All,
I am facing serious issues with Timer and TimerTask.
Runtime exceptions thrown in TimerTask kill that one thread, thus making Timer dead i.e. scheduled tasks will not run anymore. Is there any way we can overcome this with Timer or it is just not possible?
I used try, catch blocks in TimerTask for RunTimeExceptions but no luck. Timer is not running any more once TimerTask throws any exceptions. Why it is not able to catch them? Is this known issue with Timer?
I am using Java 1.5.0_08.
Any guidance is appreciated.
Thanks in advance,

sairamvla wrote:
Runtime exceptions thrown in TimerTask kill that one thread, thus making Timer dead i.e. scheduled tasks will not run anymore. Is there any way we can overcome this with Timer or it is just not possible?Not possible (at least, not possible just by using a Timer).
I used try, catch blocks in TimerTask for RunTimeExceptions but no luck. Timer is not running any more once TimerTask throws any exceptions. Why it is not able to catch them? Is this known issue with Timer?It's perfectly possible for you to catch a RuntimeException, in a TimerTask or anywhere else. If you were thinking that there is a language feature or something which makes catching exceptions work differently in a TimerTask, you weren't thinking right. Your code is just wrong.

Issue with 2 mics when recording Garageband podcast

Similar Messages

Maybe you are looking for