Issue with 900 screen of PNP logical database.

Hi Experts,
I am using 900 screen in PNP logical database and assigned the default report catagory.
But in the selection screen when I click on further selection and select any of the parameter like company code/cost center, nothing comes in to the screen.
Request to let me know any issue there?
Br/Manas

hi
After selecting the fields from further options are you first adding them and then saying ok or just saying ok. Please check and let me know.
If you add and then say ok these fields appear on the screen,
Santoshi

Similar Messages

Standard screen for PNP logical database

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

>>>I do not knw how to create a variant or how variant are related to selection screens..can u please elaborate..
Don't worry..then its not the issue..
anyway Pl take a look at the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c0/980374e58611d194cc00a0c94260a5/frameset.htm">SAP Help</a> on Variants.
~Suresh

Selection Screen of PNP Logical database

Experts,
I am stuck up in filtering of data.
I am using PNP logical database in Adhoc Query, if I select Current Month as data selection than also it is giving all list of data..
Can anyone give Input to me.
it is urgent.
Point will revert for useful answer.
Hetal.

how about if u do this step
1. Goto- Attribute.
2. Click "Change"
3. Click 'HR Report Category'
4. Click 'Create Report Category'
5. Click 'new entries' for careating Report Category
5. Select newly create report category
6. Click the folder 'Definition of Organizational Selection'.
7. Click 'New entries'.
8. Here you assign the required fields to be displayed, for eg pywerks - personal area.
9. finally assign this newly created 'report category' in the screen you will get upon clicking 'HR report Category' button in the Program attribute screen.
Hope this may help you. I am not much into hr abap. but sharing the info which i am aware.

Mandatory field in selection screen of pnp logical database report

Hi experts,
Im using pnp logical database in my report.
It give the standard selection screen. I need to make some fields in the selection screen as mandatory like pnpwerks.
How its possible. Give me some solution.
Thanks,
Priya.

how about if u do this step
1. Goto- Attribute.
2. Click "Change"
3. Click 'HR Report Category'
4. Click 'Create Report Category'
5. Click 'new entries' for careating Report Category
5. Select newly create report category
6. Click the folder 'Definition of Organizational Selection'.
7. Click 'New entries'.
8. Here you assign the required fields to be displayed, for eg pywerks - personal area.
9. finally assign this newly created 'report category' in the screen you will get upon clicking 'HR report Category' button in the Program attribute screen.
Hope this may help you. I am not much into hr abap. but sharing the info which i am aware.

Query: PNP Logical Database Screen

Hi,
My requirement is to default some values in the SORT ORDER button of the PNP screen.
I can do that by creating a variant and attaching it to the Tcode, but is there any other way to do it.
Also, I need to add couple of new values to that list.
Please suggest how to achieve it.
Helpful replies will be rewarded.
Regards,
Amit

Amit,
you need to use Report categories as a solution to the issues mentioned in your mail.
You can access report category by going to attributes of your HR report which is using PNP logical database.
You will find a button in 'Attributes' dialog screen for HR Report Categories which will enable you to add new fields, default the values etc.
Reward points , if helpful.
Regards
Waz

Using PNP logical database in report

Hi i'm using the PNP logical database in my report, and i want to hide all fields in the 'Period' frame.
is there any way to do it automatically or is it necessary to hide them one by one??
Thanks in advance.

If you can put them all in the same screen group, you may be able to do this. But you might run into problems when you re-generate.
Rob

IN HR PAYROLL REPORT USING PNP LOGICAL DATABASE

Dear abapers,
                        when i ab runing HR payroll report usin PNP Logical database there are some error occurs.
            INCLUDE DBPNPCOM
                     IN UNICODE PROGRAMS, THE "-" CHARECTOR CAN NOT APPEAR IN NAME , AS IT DOES HERE IN THE NAME
                    PNP-SW-FOUND.
     INCLUDE DBPNPCOM
                   IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
                   PNP-SW-IGNORELOCKEDRECORDS.
     INCLUDE DBPNPCOM
                   IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
                   PNP-SW-ENQUEUEPERNR.
                        PLEASE GIVE ME SOLUTIONS .
                                                                     THANK YOU SIR.

Hi, please check, these might be warnings, not errors.

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Line item in PNP logical database

Hi All,
Can anyone tell me, what is the selection logic for PNP Logical database, suppose in one report we use PNP Logical database,
So when we put some date range, so in the output of report there are 2 fields, so during that date range 1 field occurs two time and other field 4 times, so how many line items would be displayed by that report.
Regards,
Kumar

read documentation for report SAPDBPNP or SAPDBPNPCE.

TABLES statement in pnp logical database

I am using PNP logical database in my program.
when i check for obselete errors it is showing the statements
"TABLES: PERNR.
INFOTYPES: 0001,0002." are Obselete
But my program is logically correct and also working.
can u tell me how to resolve this error.

tables sflight is exactly the same as data sflight type sflight.
The same for the infotypes statement, but then you have to reference to the pa#### table.
Kind regards, Rob Dielemans

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

Report creation with PNP logical database

Hi All
Want to select data according to the begda and endda on the selection screen, if any body has the code will be of great help
rgds
aj

Hi,
In the attributes,give PNP as logical database.
Then in the program,paste the following coding.
tables pernr.
infotypes 0001.
start-of-selection.
get pernr.
provide * from p0001 between pn-begda and pn-endda.
write : / p0001-begda, p0001-endda.
endprovide.
end-of-selection.

PNP logical database screen and provide statement.

hi all,
I have changed standard selection screen for PNP and now i dont have PERNR on it but it has only company code and one extra field added by me.
then after "GET PERNR."
Now if i execute statement "provide * from P0001 between pn-begda and pn-endda.", it gives me record for only pernr.
can someone explain me??
Reena..

As your report is tied to PNP, & you have only BUKRS as on the selection screen, the GET PERNR will be executed for all the PERNRs that belong to the Company Code input. You don't have to specify the Pernrs.. the LDB will select it for you..
~Suresh

Issue with 900 screen of PNP logical database.

Similar Messages

Maybe you are looking for